Used Champion 600 for sale (10,926)

Condition: good (used), Year of construction: 2003, Ref. -No.: 10618 Manufacturer: KELLENBERGER Type: 600 U Nr. 33 Year of construction: 2003 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175 - 250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Cpsdpoya Dagofx Afpsu Dwell time of the table reversal: 0 - 5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 1500 / 1700 / 2200 / 3600 Swiveling grinding wheel head: 360 ° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Micro-corrector of the feed, 1 division of the dial: 0,001 mm / Ø Working speeds continuously adjustable (normal / special): 20-400 / 10-400 Max. Grinding length: 900 mm

Condition: good (used), Year of construction: 2001, Ref. -No.: 10617 Manufacturer: KELLENBERGER Type: 600 U Nr. 36 Year of construction: 2001 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175-250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0 -5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 360° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Micro-corrector of the feed, 1 division of the dial: 0,001 mm / Ø Working speeds continuously adjustable (normal / special): 20 - 400 / 10-400 Max. Grinding length: 900 mm Cpsdpjya Daasfx Afpeu

Condition: used, functionality: fully functional, machine/vehicle number: H2X394D522.., Year of construction: 2013, operating hours: 4,687 h, load capacity: 5,000 kg, lifting height: 4,100 mm, fuel type: diesel, mast type: duplex, construction height: 2,920 mm, fork length: 1,200 mm, empty load weight: 7,595 kg, drive type: Diesel, Diesel forklift Chassis number: H2X394D522.. Load centre: 600 Mast type: Duplex Transmission: Hydrostatic Condition: Ready for operation and fully functional Technical condition: Very good Front tyres type: Solid rubber Front tyres condition: 60 - 80% Rear tyres type: Solid rubber Rear tyres condition: 60 - 80% Cpsdpfxsyhr Sgo Afpju Sideshift, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, full cab,

Condition: used, Year of construction: 2022, operating hours: 12,787 h, machine/vehicle number: M210019, comprising: FP 600 Duo complete, complete laser station, SIC MARKING, type XXL-BOX 1200, year of manufacture 2021, washing machine, filter system for the washing machine, oil separator, ultrasonic cleaning, 1 robot of type IRB 4600, version IRB 4600-40/2.55, IRC5 Single Codpfx Afjycivfopspu

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 600-1422, INCLUDED IN THE PRICE: COMPRESSOR JUN-AIR 6 25 Cpedpfx Aov Uyt Uefpju KNIVES

Condition: used, Year of construction: 2001, functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 510 mm, controller manufacturer: Fanuc, controller model: Fanuc O-MD, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 24, tool diameter: 40 mm, 3 Axis Good condition excellent maintained Previously worked in Switzerland BT-40 Codpfx Afoyg Dizopspu

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 2,857 h, load capacity: 5,000 kg, lifting height: 3,420 mm, fuel type: electric, mast type: telescopic, construction height: 2,850 mm, fork length: 1,800 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 600 Fork width: 150 mm Fork thickness: 60 mm ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Telescopic Gearbox: Electromechanical Technical condition: Very good Front tires Type: Superelastic Front tires Size: 355/55-15 Rear tires Type: Superelastic Rear tires Size: 225/75-9 Battery Volt: 80V Battery Ah: 700Ah Battery manufacturer: Hoppeke Cjdpfx Afsu D S E Sepspu Battery year of construction: 2015 Description: Incl. charger Fork positioner, 3rd valve, rear working lights, front working lights, roof cover, windshield, safety light, Multi-lever, Single pedal, Integrated attachment

Condition: used, tank capacity: 600 l, GENERAL Equipment: disc valve Design: vertical Remarks: frame made of V2A; manway approx. 300 x 440 mm; 1 tank with 1 dent in the cylinder (see photos) Internal diameter: 840 mm Total height: 1,700 mm Location: Bremen Volume: 600 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,000 mm Last application: pharmaceutical TANK Support type: frame Codpfeycky Ssx Afpspu EQUIPMENT Manway/dome: in the top head Outlet: DN25 DIN 11851 Note: signs of use

Condition: used, tank capacity: 600 l, GENERAL Design: vertical Speed: 1420 rpm External diameter: 900 mm Total height: 1,800 mm Power: 1.50 kW Top: open Agitator: propeller Agitators: 2 agitators Location: external storage Volume: 600 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 920 mm Csdpfx Asyckwkefpspu TANK Bottom: Klöpper head Support design: feet Number of feet: 4 pcs EQUIPMENT Outlet: 80 mm Note: Light residues AGITATOR Voltage: 220/380 V Agitator equipment: clamp-on agitator, eccentrically mounted

Condition: used, tank capacity: 600 l, GENERAL Equipment: Disc valve Design: Container Remarks: Some larger residual fruit pulp on the interior Internal diameter: 790 mm Total height: 1,740 mm Max. positive pressure: 1.0 bar Location: Bremen Nameplate: Vacuum: 0.15 bar Volume: 600 liters Product-contact material: V2A 1.4301 (AISI304) Cpjdpfxsyckm Ej Afpju Condition: Used Cylindrical height: 1,030 mm Previous use: Food TANK Base type: Feet Number of feet: 4 EQUIPMENT Manhole / Access port: in the top head (DN 400) Outlet: DN50 DIN 11851 Note: Light residue, signs of use MATERIAL SPECIFICATION Feet material: Stainless steel

Condition: used, tank capacity: 600 l, GENERAL Equipment: Level indicator (no guarantee), ball valve Design: vertical Remarks: including control system (steam sterilization and pressure superposition), see last image Insulation: present Agitator: propeller Location: Bremen (available from mid-January 2026) Volume: 600 litres Product contact material: V2A 1.4301 (AISI304) Condition: used VESSEL Base type: frame Cpjdpfxeycizno Afpju INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manhole / dome: in top head Outlet: present AGITATOR Agitator arrangement: eccentrically in the top head

Condition: used, all stainless steel belt width 600 mm mobile mesh width 5 mm adjustable speed with air knives with batter pump Codpfoyfd Tdjx Afpepu

Condition: ready for operation (used), Year of construction: 2013, Movement Y-Axis Movement 510 mm Z-Axis Movement 580 mm This 5-axis Mazak Variaxis i-600 was manufactured in 2013. It features a Siemens 840D control system, a table size of 600mm, and a spindle speed of 18000 RPM with a power of 35 kW. The machine offers a tool capacity of 40 and has spindle run hours of 1900. If you are looking to get high-quality milling capabilities, consider the Mazak Variaxis i-600 machine we have for sale. Contact us for more information about this machine. Codpfx Afex R E Ihepspu Application Types Milling

Condition: good (used), Wanson steam generator from meat factory which closed in 2016. 698 Kw. Further details are on the plates shown in the photographs. Cpsdpfx Aei Uli Eofpeu

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 13,663 h, load capacity: 2,000 kg, lifting height: 4,865 mm, free lift: 1,600 mm, fuel type: gas, mast type: triplex, construction height: 2,204 mm, drive type: Treibgas, LPG forklift ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Cpedpfoyfyvbjx Afpeu Sideshift, fork positioner, 3rd valve, 4th valve, heating, full cab,

Condition: like new (used), Year of construction: 2012, operating hours: 3,432 h, functionality: fully functional, pressure: 13 bar, operating pressure: 13 bar, For sale: Jumag steam generator with gas burner Type C 600 Steam output: 600 kg/h. Max. steam pressure: 13 bar. Like new, only 3,432 operating hours. Cpedpfx Afeydq Niopsu Delivery available at extra cost. If you have any questions, please contact us.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, grinding belt length: 2,150 mm, input current: 39 A, Wide belt sander SCM suitable for calibration/sanding of solid wood, veneer and lacquer base. Model: Sandya 600 RCS Working width: 1.100 mm Working thickness: 4-170 mm Main motor: 15 kW (invertor) Abbrasive belts speed: 3-16 m/s (inverter) Feeding speed: 3-18 m/min (inverter) Abbrasive belts length: 2.150 mm Cjdpfxsygddls Afpjpu Aggregates: 1. Steel calibrating roller R (diam. 140 mm) 2. Combinated unit CS: - rubber coated roller (diam. 160 mm, hardness 30Sh) - elektronic sectional pad (segments width 30 mm) 3. Sanding brush ScotchBrite (diam. 150 mm) Other equipment: - 5 idle supporting rollers at infeed - 5 supporting rollersat outfeed (1st roller motorized) - version C-Plus - pneumatic exclusion of the 1st roller - pneumatic exclusion of the 2nd roller and the pad - electronic programmator LOGIC TS with LCD touch screen 10,4" - motorized height adjustment Stat of the machine: very good Production year: 2016 Weight: 1.400 kg El. power: In=39A Machine availability: cca April 2026

Condition: ready for operation (used), Year of construction: 2017, number of axes: 3, This 3-axis DMG MORI CMX 600 V was manufactured in 2017, featuring a 4th axis rotary table preparation, Siemens 840D control, and SK40 spindle. It includes advanced probing systems for both workpiece and tools, ensuring precision. Ideal for those looking to enhance their machining capabilities with reliable equipment. Contact us for more information about this machine. • Basic machine with main‑drive options • Preparation for rotary table (4th axis), EA 510L (rotary table itself not included) • Safety measuring system for X/Y/Z axes • Signal lamp, 4‑colour standard • PROGRESSLine & Planolight • Signs language: Hungarian • Screen text: German/Hungarian • Documentation: Doc 1 & Doc 2 (HU); Electrical circuit diagram (DE) • Misc.: Preparation for machine handover; internal rebuild unit ID 34; inspection & preparation noted Additional equipment • Chip conveyor with ICS (internal coolant) + chip tank (Production Package 1) • Workpiece probing system TS 649 (on table) • Tool probing system TT140 • Lamp inside tool magazine • Tool loading through magazine door • Platform/foil machine base • NetService remote service (ID 2632226) Cpjdpfsx D Di Usx Afpju

Condition: used, continuous teflon belt grill suitable for thermo oil heated with lower and upper belt - bottom and top grilling belt width 600 mm Codpfx Afeydk H Iepepu adjustable speed product height electrically adjustable nett frying length 6.800 mm total length 9.300 mm total width 1.500 mm weight : 5.700 kg

Condition: excellent (used), Year of construction: 1997, grinding diameter 80 - 250 mm grinding length 600 mm centre height 175 mm longitudinal feed 750 mm workpiece turning speeds 6 - 600 U/min grinding spindle speed 1500 - 3600 U/min cross movement - autom. and by hand 320 mm Control Kelco 80 Cpodpfx Asyb S Rcjfpeu weight of the machine ca. 4,4 t dimensions of the machine ca. 3,1 x 2,1 x 2,0 m

Condition: used, Year of construction: 1999, Transnorm conveyor belt GF 800-600-500 RA2431 Technical data: Conveyor length (NL): 800 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 330 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 1.42 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 S1 Cpedpfx Aexiryrsfpou Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Transnorm conveyor belt GF 1240-600-500 RA2465 Technical data: Conveyor length (NL): 1240 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 330 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 1.10 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik Csdpfxoyhikmj Afpspu

Condition: like new (used), Year of construction: 2001, x-travel 600 mm y-travel 450 mm z-travel 450 mm weight of the machine ca. 6500 kg required space 3,900 x 3,500 x 2,700 mm MIKRON VCP 600 – CNC Vertical Machining Center (Year of Manufacture: 2001) The MIKRON VCP 600 is a precise 3-axis CNC vertical machining center, ideally suited for high-accuracy machining of complex workpieces. With its robust construction, high-performance spindle, and reliable Heidenhain control system, it meets the highest standards in both single-part and series production. All specifications are provided without guarantee. Exact technical details will be provided at the time of purchase. Control system: TNC 426/430 Travel Paths X-axis: 600 mm Y-axis: 450 mm Z-axis: 450 mm Table Table size: 850 x 530 mm Maximum table load: 400 kg Number of T-slots: 6 T-slot spacing: 63 mm T-slot width: 14H12 mm Spindle Spindle speed: 100 – 20,000 rpm Spindle power: 12 / 16 kW Tool holder: HSK-A63 Tool Changer Number of tool positions: 30 Cpodpjwmzgfsfx Afpou Max. tool diameter: 90 mm Max. tool diameter with adjacent slots empty: 110 mm Max. tool length: 250 mm Max. tool weight: 6 kg Chip-to-chip time: approx. 7 seconds Feed and Rapid Traverse Feed rate: 0 – 22,000 mm/min Rapid traverse: 22 m/min Feed force (X/Y/Z): 5,000 N Dimensions and Weight Machine weight: approx. 6,500 kg Installation dimensions (L x W x H): approx. 3,900 x 3,500 x 2,700 mm

Condition: ready for operation (used), Year of construction: 1997, overall weight: 3,000 kg, number of axes: 3, This 3-axis CDM Rovella BF 600 die-sinking EDM machine was manufactured in 1997. It features a 1400x700 mm working area and comes with equipment included. If you are looking to get high-quality die-sinking capabilities, consider the CDM Rovella BF 600 machine we have for sale. Contact us for more information about this machine. • Model/Size: 1400 x 700 Csdeycbbtopfx Afpjpu Additional equipment • Equipment included (details not specified)

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 3,836 h, load capacity: 2,000 kg, lifting height: 3,170 mm, fuel type: diesel, mast type: telescopic, construction height: 2,275 mm, fork carriage width: 1,150 mm, fork length: 1,600 mm, empty load weight: 4,156 kg, drive type: Diesel, Diesel forklift Load center: 600 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Telescopic Transmission: Electromechanical Condition: Ready for use and fully operational Technical condition: Very good Front tires type: Superelastic Cjdpoyb Uq Eofx Afpspu Front tires size: 23x9-10 Rear tires type: Superelastic Rear tires size: 21x8-9 Description: Location 02943 Weißwasser Sideshift, fork positioner, 3rd valve, 4th valve, rear working lights, front working lights, heater, full cabin, interior mirror, single pedal, seat,