Used Chip Centrifuge for sale (5,807)

Condition: used, Centrifugal pump, water pump, block pump, spiral casing pump -Manufacturer: Ebara, centrifugal pump type 2CDX/A 70/12 -Flow rate: 20-80 l/min -Engine power: 0.9 kW -Speed: 2800 rpm -Pipe connection see photos Bodpfxjux Sbcj Agkjdi -Dimensions: 385/210/H250 mm -Weight: 13.4 kg

Condition: used, Drum wood chipper IDC000024 Bdedstqz Sbjpfx Agkoi - Manufacturer: Erjo, - Model: 204 MA, - Capacity: 20 - 40 m3/val., - Weight: 3000 kg, - Electric motor: 30 kW.

Year of construction: 2018, condition: good (used), coolant capacity 10 m3l/h Headroom 20 m operating pressure 2 bar voltage 230/400 V - 50 Hz motor speed 2900 U/min motor type 90 L Bsdpfxeub Utds Agksdi engine output 2,2 kW weight 35 kg Standard suction centrifugal pump, Stainless steel housing and impeller, Flange connections, Serial No.: 22/04-140200

Condition: used, Radial fan, low pressure fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower -Manufacturer: Elektror, radial fan low pressure fan type D-06/S 484 -Volume output: 10 m³/min -Fan wheel: Ø 170 x 90 mm Bsdpfsuqf Ilox Agkedi -Speed: 2800 rpm -Inlet: Ø 105 mm -Air duct connection: 110 x 110 mm -Dimensions: 410/280/H365mm -Weight: 12.3 kg

Condition: ready for operation (used), Drum chipper type Bruks type 1202 CS6 for production of high quality pulp chips from bulky mixed waste such as: Edgings, slabs, trim ends, plywood, veneer and joinery waste and log tops. The chipper can produce pulp and board chips, or fuel chips. Bdjdpfeuhvhpsx Agkoi Capacity up to 50 m3 chips per hour With bigger electrical motor up to 100 m3 of chips per hour Electrical motor 75 kW

Condition: used, Centrifugal pump, water pump Bdodpjciq Dlofx Agksi -Type plate: unfortunately not available -Delivery capacity: 20-50 m³/h -Max. H: 14-9 mWs -Motor power: 1.85 kW -Speed: 2825 rpm -Pipe connection inlet: DN65 -Pipe connection output: DN40 -Dimensions: 540/290/H310 mm -Weight: 49kg

Condition: good (used), centrifugal pump, water pump Bdsdociq Duepfx Agkji -Motor power: 3 kW -Speed: 2850 rpm -Pipe connection inlet: DN Ø 64 mm -Pipe connection outlet: DN Ø 38 mm -Dimensions: 470/220/H430 mm -Weight: 41 kg

Condition: used, Centrifugal pump, high pressure pump, water pump, multistage vertical centrifugal pump -Drive: 4 kW 960 rpm -Max. Delivery rate: 2.58 m³/h -Max. Pressure: 3 bar -Max. Temperature: °C -Dimensions: 730/350/H310 mm Bsdpjctq Rdofx Agksdi -Weight: 88 kg

Condition: good (used), Centrifugal pump, high-pressure pump, water pump, multi-stage vertical centrifugal pump -Drive: 0.37 kW 2900 rpm -Max. flow rate: 2.0 m³/h -max. H: 14.8 m -Dimensions: 200/210/H420 mm -Weight: 15 kg Bdedpfx Agob A Ni Nokoi

Year of construction: 1984, condition: good (used), centrifugal pump, acid pump, alkali pump -Motor power: 11 kW -Speed: 1440 rpm Bedpob A R Iyefx Agkedi -Capacity: 40 m³/h -Pipe connection inlet: DN80 -Pipe connection outlet: DN80 -Dimensions: 1550/550/H550 mm -Weight: 240 kg

Condition: good (used), Chip extraction, filter extraction, bagging filter -Drive: 0.96 kW -Speed: 2800 rpm -Connection: Ø 50 mm -Connection: 380 V Bdedpfx Agsb A E Uhjksi -Dimensions: 780/470/H340 mm -Weight: 135 kg

Condition: good (used), Radial fan, chip extraction blower, fan, extraction, chip blower -Engine power: approx. 22 kW -Speed: not visible -Volume flow: not visible -Inlet connection: Ø 280 mm -Outlet connection: Ø 450 mm -Dimensions: 1050/900/H920 mm -Weight: 280 kg Bdsdpfxsb Iqf Us Agkoi

Condition: new, capacity up to 4 200 kg/h power 5,5 (7,5) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 725 mm width 690 mm height 1 440 mm insertion resp. discharge height 1 440 mm weight 70 kg material 1.4301 / AISI 304 mash discharge height 470 mm Bodjb I Sxkspfx Agkjdi suitable for pomaceous and stone fruit scope of delivery stand, 9 mm cutting screen

Condition: new, Elevator SA200 with centrifugal mill rotatable capacity up to 1 000 kg/h power: elevator 0,37 (0,5) kW (PS) mill 2,2 (3,0) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 2 620 mm width 700 mm height 2 100 mm insertion resp. discharge height 800 mm weight 185 kg material 1.4301 / AISI 304 connections: connection for cleaning ½ “ inside connection for washing bath 1 ½ “ outside Bdjdpfxsb I Ucas Agkoi mash discharge height 1 260 mm suitable for pomaceous and stone fruit, berries

Condition: new, capacity 1 500 l/h Bedob Nt Rmspfx Agksdi power 4,0 (5,44) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 930 mm width 550 mm height 1100 mm weight 425 kg material 1.4301 / AISI 304 suitable for fruit and vegetable juices

Condition: excellent (used), Coolant pump, immersion pump, coolant pump, centrifugal pump, cooling lubricant pump -Manufacturer: Grundfos, coolant pump type SPK1-11/8 AAA -Drive: 0.25 kW 2850 rpm -Max. flow rate: 1.0 m³/h -Max. delivery head: 22 m Maximum temperature: 90 °C -Dimensions: 180/150/H590 mm -Weight: 11 kg Bsdpfshtryxex Agkedi

Condition: new, Year of construction: 2025, 2 high-performance impeller wheels, Ø380, 11 kW each. Our impeller wheel is characterized by its high flexibility due to its ability to rotate both clockwise and counterclockwise. Our two-disc turbine ensures a stronger, more concentrated hot spot and more efficient blasting. Replacing the 8 impeller blades and the internal lining is easy and can be done without special tools or the need to disassemble the turbine wheel. All wear parts are made of high-quality materials for a long service life. A mechanical pre-acceleration of the abrasive ensures optimal utilization of the energy used. It also forms the heart of the blasting system: the efficiency and economy of the blasting system are decisively influenced by the efficiency of the impeller wheel. The impeller wheel is directly driven and, depending on the diameter, is equipped with 4-8 blades (Ø240, 4 pieces; Ø380-500, 8 pieces). High efficiency and maximum utilization of the energy used are thus guaranteed at all times. We will be happy to advise you! Bdodpehvmkxefx Agkji

Condition: used, Chip conveyor, scraper conveyor with coolant tank, BMF Type KF 200 K17 Ident. No.: Order No.: 915979 Year of manufacture: 1992 Width of metal links: 200 mm Distance between carrier bars: approx. 380 mm Length of possible chip discharge: 1100/2100 mm Insertion length: approx. 1350 mm Insertion height: 370 mm Insertion width: 460 mm Hopper width at the top: 400 mm Bdodpshwt H Aofx Agkei Hopper width at the bottom: 170 mm Conveying height – discharge height: approx. 1250 mm Motor power, belt drive: 0.37 kW Mains connection: 400 volts, 50 Hz - Drive of the scraper chain via geared motor - Coolant tank without coolant pump Space requirement L x W x H: 3800 x 1300 x 1650 mm Weight of chip conveyor: approx. 500 kg Good condition The chip conveyor comes from a GILDEMEISTER CNC lathe. The conveyor is suitable for the chip transport of a milling machine, lathe, or machining center.

Condition: used, Sorvall SLA-1500 We have two pcs in stock, price is for one pc only. Bodpfeh E Di Iox Agkjdi

Condition: used, centrifugal pump, water pump, stainless steel pump, food pump -Manufacturer: Hilge, stainless steel centrifugal pump -Type: Contra I/3 AD-V 25/25/1.5/2 -Motor: Siemens 1.50 kW / 2860 rpm -Inlet/outlet pipe connection DN25 -Dimensions: 715/215/H265 mm Bdedpfx Ash Hbw Nsgkji -Weight: 37 kg

Condition: used, Collecting pan, floor pan, collecting container, floor element, steel flat pan, coolant liquid collecting pan, collecting pan grinding machine milling machine Bjdpsh Ic Nzefx Agkodi -Collection pan: for chips with coolant liquid, 1045 x 745 mm -Bath height: 150 mm -Cut-out: 240 x 175 mm -Total dimensions: 1045/745/H150 mm -Weight: 12.1 kg

Condition: new, Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) Power: 18,5 kW Shaft length: 550 mm Shaft diameter: 222 mm Bjdpfx Asgw Sxzsgkedi Shaft RPM: 120 rpm Number of cutting knives: 14 Granulation: 10-30 mm Capacity: up to 4 m3/h (depending on the wood) Material discharge opening: 160 mm Material: Plastics, cardboard, wood (chipboards, MDF boards, waste,...) Filling opening: 946 x 567 mm Dimensions L/W/H: 1880/1120/1670 mm Weight: approx. 1250 kg 2 years warranty or 2000 working hours Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Year of construction: 2010, condition: used, Centrifugal fan, chip extraction fan, fan, suction, chip blower, high performance fan -Motor power: 5.5 kW -Speed: 2895 rpm Bdodpjn Srvysfx Agksi -Volume flow: 1060 m³/h -Connection input: Ø 200 mm -Connection output: Ø 115 mm -Dimensions: 775/1000/H1350 mm -Weight: 170kg

Condition: new, Brugger HX16 Pro professional petrol wood chipper. This wood chipper is designed for professional use, and thanks to its high-quality construction and powerful driving force, even heavily branched material is no problem! With ease, it processes logs with diameters of up to 16 cm. It is powered by a strong 35 HP Rato gasoline engine and also features a No-Stress automatic system that prevents the engine from stalling under overload. The HX16 Pro comes with an "AL-KO" chassis and lighting system and can easily pass the TÜV inspection. It offers: Maximum log diameter: 16 cm Feed opening: 16.5 cm x 30 cm 35 HP Rato gasoline engine No-Stress Automatic Feed System Hydraulic feed Bsdpsmfnz Eofx Agkjdi Weight of 730 kg Price + VAT. Delivery available throughout Europe. -- Trailer-mounted chipper, wood chipper, wood shredder, branch chipper, branch shredder, professional chipper, wood shredding machine.

Condition: good (used), Offer 24083 Technical data: - Capacity 300 L - Load capacity up to 750 kg - Entry pockets for forklift trucks - Tipping function - Drain tap for draining liquids - Mobile base frame with 2 swivel castors - Space requirement W 1500 x D 750 x H 1250 mm - Weight approx. 220 kg Bdsder Hn Daspfx Agkoi