Used Chip Centrifuge for sale (5,835)

Year of construction: 1976, condition: used, throughput 2.500 - 4.000 Ltr - self-cleaning - with manual star-delta switch and with emergency stop function Hsdpfx Abob Im H Ujzow - flowmeter - engine 7,5kW, 50 Hz, plug 32A - condition: overhauled

Year of construction: 2002, condition: used, Drum diameter: 682 mm Height: 539 mm Hedpfjfmqv Usx Abzow Max. Filling quantity: 167 kg Max. Speed: 980 min-1 Control cabinet not available, can be ordered directly from Steimel (approx. 8,500 Euro - as of May 2021) Operating instructions available

Condition: refurbished (used), Wood chip screen IDL000756 Hedstmtf Rjpfx Abzow - Three layers - Manufacturer: Passimo OY - Screen area: 15 m2 - After renovation.

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load Hsdewp Rqfjpfx Abzjw • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price: 30,000.00 EUR (VAT is not included)

Condition: used, Chip suction filter, with automatic filter cleaning (backwashing with blowers and Macair panel) with 1 bag. Hedpfotxdpxex Abzjw

Condition: excellent (used), Eppendorf 5702 R Centrifuge in very good condition. Eppendorf 5702 R with A-4-38 rotor The Eppendorf 5702 R is a compact, refrigerated benchtop centrifuge designed for use in clinical, research, and industrial laboratories. Its compact dimensions and quiet operation make it ideally suited for routine applications at medium centrifugation speeds. Technical specifications: • Model: 5702 R (refrigerated) • Max. speed: 4,400 rpm • Max. RCF: approx. 3,000 × g • Temperature range: –9 °C to +40 °C • Speed range: 100–4,400 rpm • Power supply: 230 V, 50/60 Hz • Functions: FastTemp (rapid precooling), “At set RPM”, soft braking, imbalance detection, control panel lock Included equipment: • A-4-38 swing-bucket rotor • Capacity: 4 × 85 ml (with adapters available for 15 ml / 50 ml tubes) • Suitable for up to 24 × 15 ml or 4 × 100 ml tubes (depending on adapters) • Compatible with standard conical (Falcon) tubes and blood collection tubes Advantages: Hodpfjxg Sb Rex Abzjw • Quiet operation and compact footprint • Refrigeration allows handling of temperature-sensitive samples • Easy operation with intuitive control panel

Condition: used, Used Alfa Laval model GS2-200 stainless steel decanter centrifuge. Bowl measures approximately 280mm diameter. Maximum solid density 3.0kg/dm3. Unit includes main drive motor and back drive. Includes control panel. Specifications: Hedow T Rh Rjpfx Abzow Bowl Diameter (Length): 11.02" Material Of Construction: Stainless Steel Backdrive Or Torque Arm: Yes Size: GS2-200 Conveyor Material: Stainless Steel Other Extras: Includes control panel

Year of construction: 2023, operating hours: 109 h, condition: like new (used), functionality: fully functional, High-performance extraction unit for aluminium chips MG 9V Centrifugal fan with soundproofed housing, M-class filter, chips fall downwards into a customer-supplied container, max. drop height 1,100 mm Drive: 4.0 kW, 400 V, 50 Hz, max. air volume flow 4,000 m3/h, noise level below 80 dB(A), selector switch for continuous operation or control via the saw. Equipped with 2 connection nozzles D160 mm, dimensions when assembled: 1825 x 1140 x 4675 mm, finish RAL 9016 Hedpsxmhkbofx Abzew

Condition: new, Chip Screen Hedpfx Abewqmpaozew Manufacturer: Vecoplan Module: VSS 15/2 Year: 2016 Screening area: 1.5m2 Number of screen floors: 2 pcs Length: 3900mm Width: 1750mm Height: 1950mm Weight: 2300kg

Condition: good (used), Year of construction: 2020, functionality: fully functional, travel distance X-axis: 215 mm, travel distance Z-axis: 520 mm, quill diameter: 72 mm, quill stroke: 110 mm, overall weight: 3,070 kg, swing diameter over bed slide: 500 mm, swing diameter over top slide: 220 mm, Equipment: chip conveyor, CNC lathe OPTIturn S600 slant bed with Sinumerik 828 D control system, including the following options: - Safety Integrate - Remnant material detection and processing - Shopturn step programming - Network drive management - 3-D simulation - Real-time drawing/track back - 15.6-inch color display, multitouch - Spindle mount DIN ISO 702-1 No. 6; chuck through-hole Ø 65mm; hydraulically operated chuck Ø 215mm; tailstock mount MK4 - Hydraulic tool turret LS200 with 12 tool stations, max. holder height 25mm - 30° slant bed for especially large machining diameters - Dimensionally stable linear guides ensure long service life through maximum static and dynamic rigidity - Handwheels for manual movement - Heat exchanger on control cabinet - Includes machine feet Hjdpfx Abew U Rv Djzew - Hydraulic unit 1500W, 60 liters - Foot pedal for hydraulic chuck clamping/release - Foot pedal for tailstock with hydraulic quill - Halogen work lamp - Siemens servo motors on all axes - Chip conveyor - Chip trolley - Device for manual tool measurement - Portable electronic handwheel - Renishaw tool probe - Includes machine feet - Electrical connection, 31 KVA three-phase 400V ~ 50 Hz - Control upgrade PPU290 SW8 - Sauter turret VDI30-12T - Automatic tailstock movement - Through-spindle coolant 20 bar - Oil skimmer - Coolant pump 5 bar - Automatic tool measurement - Automatic parts catcher - Axial driven tool holder - Radial driven tool holder

Condition: used, For Sale: KWB Multifire 20–80 kW Biomass Boiler – Flexible Heating with Wood Chips and Pellets The KWB Multifire 20–80 kW is a fully automatic biomass boiler, ideal for apartment buildings, commercial facilities, or agricultural operations. Hsdpfx Aottqd Nebzsw It can be operated with both wood chips and pellets, offering maximum fuel flexibility, reliable performance, and high efficiency. — Key features: • Fuel: Wood chips / Pellets • Output: 20–80 kW • Fully automatic combustion, feeding, and cleaning • Robust design for continuous operation • KWB – Austrian innovation in biomass heating PRICE: 4,900 EUR Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) — Top Heating Systems – ProfiKazán Flexible biomass heating systems for residential and commercial buildings.

Condition: excellent (used), Hettich ROTINA 420 and 420R laboratory centrifuges are state-of-the-art devices designed for laboratories that require centrifugation of large numbers of samples or samples with large volumes. They are used in medical diagnostic laboratories, research institutions and industrial laboratories. With extensive equipment options, Rotina 420 centrifuges can always be optimally adapted to the current needs in the laboratory. The Rotina 420 R laboratory centrifuge additionally features a high-efficiency cooling system. Hodpfx Absuptrcozew The main advantages of the ROTINA 420 and 420R centrifuges: centrifugation of slides at up to 15,000 rpm (24,400 x g) capacity of up to 4 x 600 mL (52 x 15 mL / 84 blood collection tubes / 16 microplates) modern, easy-to-use control panel large, easy-to-read display of preset and current operating parameters selectable deceleration and acceleration curves 98 user-defined centrifugation programs self-diagnosis function quiet operation and high stability brushless induction motor guaranteeing many years of maintenance-free operation choice: model without cooling (ROTINA 420) or with efficient cooling system in the range of -20°C to +40°C with pre-cooling and 'stand-by' function (ROTINA 420R) wide range of rotors and accessories: 4 horizontal rotors for tubes and buckets up to 600 mL and microplates and cytology slides 2 angled rotors for tubes up to 250 mL 1 angled rotor for microtubes 0.2-2.0 mL 1 angled rotor for 0.2 mL tubes and PCR strips Rotor on equipment: Hettich Angle rotor 6-place with bio-containment for Benchtop centrifuge

Condition: used, Used GEA Westfalia model HSB-300-06-777 stainless steel disc stack centrifuge. Inlet feed 1.16kg/dm3 & heavy liquid 1.30kg/dm3. Maximum rated 4,800rpm. Unit includes stainless steel collection pot, used Seepex pump, control cabinet.. Unit is driven by 75kw, 1486rpm, 400volt, 3/50 electric motor. Hodpfew T Rh Dex Abzsw

Condition: used, Tipper container for forklift RMS Rotherm Mechanical Systems Type KK - 125 Hsdpoxcbn Sofx Abzow Chip container - bulk container - folding container Manufacturer No.: 84477 Year of manufacture: 2011 Load capacity: max. 2000 kg Volume: approx. 1 m³ Fork entry pockets: 200 x 60 mm Fork spacing inside/outside: 505/900 mm - Manual locking device for the tipping trough - Tipping process triggered by gravity - 4 plastic caster wheels Ø 175 mm, 2 of which are swivel wheels with wheel locks - Fork pockets/forklift carriage pick-up Net weight: 195 kg Width: 1130 mm Depth: 1570 mm Container height: 880 mm Overall height with chassis: 1200 mm Good condition Suitable for collecting, storing, and transferring recyclables

Condition: used, machine/vehicle number: IDC000031, Chip drying barrel Length - 14 m Width - 3.6 m Hodorl Ra Hopfx Abzsw Drying capacity - 10t/h

Condition: used, functionality: unexamined, machine/vehicle number: 5415R, Used Eppendorf 5415R "Micro" refrigerated centrifuge With timer and adjustable speed, Digital Manufacturer: Eppendorf Model: 5415 R Power supply: 220 volts Hedpfx Aoxmha Ajbzsw Max speed: 13,200 rpm Max. capacity: 24×1.5/2.0 ml or 0.2/0.4/0.5/0.6 ml or 36×0.5/0.2 ml Weight: 21 kg Price per unit.

Condition: ready for operation (used), 🔧 Key Features Hjdpewnx Ngefx Abzjw Continuous Operation: Designed for uninterrupted processing, ensuring efficient separation of solids and liquids. High Separation Efficiency: Capable of achieving significant separation of solids, oil, and water, with capacities up to 30 m³/h, depending on the model. Robust Construction: Built with durable materials, such as 304 stainless steel for product contact parts, ensuring longevity and resistance to corrosion. Advanced Control Systems: Equipped with PLC control panels featuring user-friendly interfaces for precise operation and monitoring.

Condition: excellent (used), The Thermo Scientific Heraeus Biofuge Primo R centrifuge enables high-throughput and low-throughput processing with optional rotors and accessories and a maximum speed of up to 15,000 rpm. This compact, high-performance refrigerated centrifuge provides efficient and flexible sample processing. The Primo R features automatic rotor recognition and unbalance detection with uniform temperature control. The Primo R is ideal for small medical laboratories, biochemical and molecular biology research, and routine analysis in industrial laboratories. Typical applications include sedimentation of cells (algae, yeast, bacteria, etc.), sedimentation of cell organelles and cell fragments, preparation of DNA samples and protein precipitates, blood and urine analysis, and centrifugation of standard test series in microliter tubes. This refrigerated centrifuge is equipped with a fixed angle and tiltable rotor. Technical specifications: Voltage: 220-240 V Current: 2.9 A Power: 490 W Maximum centrifuge speed: 15,000 rpm (adjustable in increments of 10) Minimum centrifuge speed: 300 rpm Maximum RFC Weight: 21855 g Temperature range: -9...40°C Noise level at maximum speed: < 60 dB Rotor recognition: automatic Unbalance recognition: electronic Safety features: lid lock and interlock Rotor specification 1: Number: 7591 Type: swinging bucket rotor Maximum speed: 4000 rpm Maximum RCF: 2585 g Maximum capacity: 4 x 100 mL Hsdjt Eva Ispfx Abzjw

Condition: like new (used), functionality: fully functional, machine/vehicle number: CS1, GEWA Chio vacuum CS1. The new price was €1,750. Hedjxiv Erepfx Abzow

Year of construction: 2013, condition: used, Decanter centrifuge for thickening municipal, industrial and biological sludge Hodpfx Aew Tllksbzsw Additional title: Sludge dewatering system Throughput capacity: 15 m³/h Weight: 545 kg Position: To be mounted on the customer's substructure Features: Operating platform

Condition: new, Year of construction: 2025, In stock: The STF 3.0 floating sink separator with our highly efficient SP1000 Mk2 centrifuge and our VS1 water screen. A compact but powerful washing system that is low-maintenance and can wash/sort up to 3000 kg/h of hard plastics. The machines are made entirely of 304 stainless steel, so salt solutions can be used without any problems. Hjdpjxhf Nwefx Abzjw An excellent starting point for a good homemade zinc float installation. The machines are in stock and can therefore be delivered within a week. Ask us for further information.

Condition: used, Total length 8400 mm Belt width 300 mm Installation height 220 mm Width 420 mm Conveying height 2000 mm Hedpfx Abjwp R Hyezsw Machine weight approx. 0.75 t Space requirement approx. 8.5x0.420x2.2 m

Condition: good (used), Year of construction: 2001, Manufacturer Mayfran Type D 60 Type chip conveyor Condition used Dimensions Length 3500 mm Width 620 mm Height 1550 mm Height 350 mm Hodpfxjvu R Ddj Abzjw

Year of construction: 2009, condition: excellent (used), The centrifuge of the brand Sigma type 1-15 PK is ideal for separating solutions and suspensions of different densities in sample tubes. Hedpfxepa N R To Abzsw Technical specifications Voltage: 230 V, 50-60 Hz Power: 630 W Speed: 14000 rpm External dimensions (W) x (D) x (H): 35 x 55 x 35 cm Rotor 24 x 1,5/2 ml

Condition: new, Year of construction: 2025, In stock: The STF 3.0 floating sink separator with our highly efficient SP1000 Mk2 centrifuge and our VS1 water screen. A compact but powerful washing system that is low-maintenance and can wash/sort up to 3000 kg/h of hard plastics. The machines are made entirely of 304 stainless steel, so salt solutions can be used without any problems. An excellent starting point for a good homemade zinc float installation. Hedoxhf H Nspfx Abzow The machines are in stock and can therefore be delivered within a week. Ask us for further information.