Used Chip Centrifuge for sale (5,820)

Condition: good (used), Year of construction: 2018, functionality: fully functional, Wood chip heating system with moving grate combustion, with flue gas dedusting, with Glosfume fine dust filter system. Boiler size: 257 cm long, 151 cm wide, 293 cm high. Weight: 7 tons. Dismantling must be performed by the buyer. Iedexciidspfx Ac Aoik

Condition: used, Tipping container for forklift trucks RMS Rotherm Mechanical Systems Type KK-125 Chip bin - bulk tipping container - folding container Manufacturer no.: 84477 Year of manufacture: 2011 Load capacity: max. 2000 kg Volume: approx. 1 m³ Fork entry pockets: 200 x 60 mm Fork spacing inside/outside: 505/900 mm - Manual locking device for the tipping body - Tipping process is triggered by gravity - 4 polyurethane swivel castors, Ø 160 mm, 2 of which are swivel-mounted - Fork entry pockets/forklift attachment Dead weight: 195 kg Width: 1130 mm Depth: 1570 mm Container height: 880 mm Overall height with chassis: 1190 mm Iijdpfoxpqzzjx Ac Ajk Good condition Suitable for collecting, storing and transferring recyclables

Condition: good (used), Year of construction: 2007, functionality: fully functional, power: 7.63 kW (10.37 HP), total width: 2,300 mm, total length: 4,000 mm, total height: 3,000 mm, type of input current: three-phase, pressure: 6 bar, input voltage: 400 V, nominal heat output: 950 kW (1,291.64 HP), operating pressure: 6 bar, Equipment: hot water, type plate available, The Pyrtec boiler system is an underfeed stoker combustion unit with internal grate and burnout grate for universal application, and is suitable for a particularly wide fuel spectrum, ranging from dry wood waste to wet forest wood chips. Maximum water content w= 50%, corresponding to a wood moisture u of 100%. The complete boiler system is type-approved (Approval No.: 02-221-512) with continuous quality control by TÜV and consists of the following components: FEED AUGER WITH BACK-BURN BARRIER LAYER: The feed auger transports the fuel into the combustion chamber and the grate area of the fireblock. The robust auger flights are made from heat-resistant chromium steel in the combustion chamber area. The feed tube is equipped with mounts for the back-burn thermostat and the thermal extinguishing valve. Above the auger is a dosing container with a photoelectric sensor for level control of the fuel barrier layer required by TRD 414. The drive is provided by a maintenance-free helical gear motor and chain drive enclosed in a dust-tight chain guard. Accessoires: Extinguishing valve with dirt strainer Iedpfxjxwhw Aj Ac Asik COMBUSTION BLOCK: Solid combustion block with multiple layers of insulation and high-quality chamotte lining. The feed and grate area consists of the fire chamber, gasification grate, and descending burnout grate. All of these components are made of highly heat-resistant cast steel (Material No. 1.4868), at least 12 mm thick and individually replaceable. This type of primary combustion system has proven to be extremely effective even with challenging fuels (wet sawmill residues, high bark content, etc.). Ash and foreign substances falling through the grates can easily be removed from outside through access holes sealed with covers. The horizontal combustion chamber is optimally shaped for complete burnout and also provides a large ash compartment. The combustion chamber door is heavy-duty, well-insulated, and can be ideally swung aside on a robust double-joint hinge for maintenance purposes. BOILER: Horizontal hot water boiler in three-pass design, mounted on the fireblock, insulated and stylishly clad. The insulated boiler front door is designed to allow the installation of an oil or gas burner. Operating temperature: max. 120 °C Operating pressure: 3.0 bar Test pressure: 6.0 bar FLUE GAS DUST COLLECTOR PYRTEC-140 to PYRTEC-650: Constructed in axial cyclone design, fully insulated and mounted to the boiler. Equipped with two insulated cleaning covers, an ash container with quick-release fastener, and mounting flange for the flue gas fan. FLUE GAS DUST COLLECTOR PYRTEC-1000: Constructed in axial cyclone design, fully insulated, free-standing for optimal placement. Includes two insulated cleaning covers, mounting flange for the flue gas fan, and connection for the ash container. FLUE GAS FAN: Specially designed fan for wood combustion operation, very quiet, with a heavy-duty, heat-resistant motor and flexible heat-dissipating hub. The fan housing can be continuously rotated at the intake, with a round exhaust outlet.

Condition: used, mileage: 14,05,000 km, Year of construction: 2006, Serial number: XLER6X2000512xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20683 Specifications: Model year: 2006 Mileage: approx. 1,405,000 km Iijdjwqwlrepfx Ac Aek Transmission: Opticruise Suspension: Full air Tires: See photos Body: Vang body with hydraulic roof and side Tipping: Rear tipping Length: 870 cm Width: 255 cm Wheelbase: 410 / 136 cm Curb weight: 12,590 kg Engine power: 500 hp Fuel type: Diesel Equipment: Tool compartment Slirej sand spreaders Bull bar Auxiliary driving lights 2x bunk beds Radio/CD Air conditioning / climate control Description:Scania R500 wood chip truck with Vang body, hydraulic roof, and hydraulic side opening.EU-approved until 07.10.2025.A matching chip trailer is available for an additional cost – see photos. The truck is ready for delivery. Km: 1405000 HK: 500 Technical approved: no EU-approved until: 07.10.2025 Own weight: 12590 Total Weight: 27000 Payload: 14335 Width: 255 Length: 870 Euro: 3 Model: R500 Gearbox: Automatic

Condition: like new (used), The centrifuge comes from a laboratory with cleanroom production and is in technically and visually as-new condition. It has been maintained with great care – absolutely clean and almost like new. I purchase all machines and peripheral devices directly from the customer at a fair price. The subsequent selling price is calculated appropriately, so that all three parties – seller, buyer, and myself as the intermediary – make a small, fair deal. Untrustworthy purchase offers from various used machinery dealers are therefore not welcome. Iedpfxjw Dzxpj Ac Aeik

Condition: ready for operation (used), Walther Trowal TT 280 Centrifugal Finishing Machine with Peel Centrifuge ZA 06 Walther Trowal TT 280 Centrifugal Finishing Machine: Gross volume: 280 liters Power: 15 kW Walther Trowal ZA 06 Peel Centrifuge: Cleaning capacity: 2,000 l per hour Drum sludge volume: 28 l Centrifugal force: 2,417 g Dirty water tank: 1,500 liters You are welcome to schedule an inspection. We can also organise affordable shipping for you! Iiodpfx Aoxvplfsc Ask You will receive a proper invoice. For customers outside Germany, a net invoice can be issued, provided a valid VAT identification number is supplied. Subject to prior sale. Visit our shop to view this and our other offers. All company names and trademarks mentioned are the property of their respective owners and are used solely for identification and product description purposes. Deviations from the technical data and errors in item descriptions may occur and are subject to change.

Condition: used, This listing is for a Thermo Fisher Scientific Labofuge 400R refrigerated Centrifuge. The unit is in full working condition and is ready for immidate realese. The Thermo Fisher Scientific Labofuge 400R is an air-cooled, quiet operating centrifuge, with temperature control for sensitive samples. This versatile refrigerated centrifuge has a temperature range between 0-40°C to help ensure low temperatures even during an extended run or when running at high speeds. The microprocessor control then monitors temperatures to prevent sample freezing. The wide range of compatible rotors, available from Thermo, allows users to fit most tubes. Easy Controls: Ijdpfxjxx Awgj Ac Aeik The microprocessor control panel is set up front for easy access, with individual indicators showing temperature, speed, and RCF settings, as well as run time. Users can set their desired parameters quickly through the touchpad controls, choose a quick run for short spins, and engage a soft start/soft break for gentle processing of more sensitive samples. Spins are powered by an induction drive that’s maintenance-free for worry-free operation. Safety Features: The automatic imbalance detector will cut out the drive if the rotor is out of balance to protect components and your work. There is also rotor over speed protection to help reduce wear on components. The steel jacket system and durable construction help the system to comply with IEC 1010. The Labofuge 400R uses a highly effective cooling environmentally friendly technology, using standstill cooling, and R134A refrigerant.

Year of construction: 2001, condition: ready for operation (used), Various machines for laboratory use and pilot processes are available. 1) 2x Bioreactor system B. Braun Biotech Biostat 15L/Biostat C-CDU, year of construction: 2001, useful volume: 15l, control: Biostat C-CDU 1137. 2) Forced-air drying cabinet Heraeus (Kendro) UT 20, useful volume: 210l, internal dimensions X/Y/Z: approx. 610mm/510mm/680mm, max. temperature: 250°C, machine dimensions X/Y/Z: approx. 770mm/940mm/800mm. 3) Ultra cryostat Lauda K 75 with a cooling thermostat Lauda RUK 40S, bath volume: approx. 30l, min. temperature: -90°C. 4) Centrifuge CEPA 8L G, year of construction: 1985, speed: 17000rpm, drum diameter: 125mm, max. filling capacity: 10kg, power: 2.2kW. Documentation available. An on-site inspection is possible. Sale of individual units possible. Iiodpfx Asxvdfmec Aok

Condition: good (used), Walther CN - 550 -PN Vibratory Finishing System & Rösler Z300 Turbo Floc Centrifuge -Walther Trowal CN-550-PN -1460 rpm -550-liter capacity -3.5 kW motor -Pneumatic acoustic cover Isdpfx Acsv Dlzpo Ajik -Control cabinet -SEPARATION DEVICE -Wastewater/discharge unit -Compound & abrasive media, 2 x boxes -Documentation -Dimensions: LxWxH 2x1.8x1.8 meters / Weight 1500 kg -Rösler - Z300 Turbo-Floc / Centrifuge -Year of manufacture: 1996 -Rotor speed: 3160 rpm -Power: 4 kW -Max. throughput: 800 liters/hour -Documentation -Dimensions: LxWxH 1.7x1x1.6 meters / Weight 400 kg Subject to errors and omissions.

Condition: like new (used), Year of construction: 2020, operating hours: 50 h, machine/vehicle number: LW250*1000, Decanter centrifuge manufactured in 2020, but put into operation in May 2021! The machine is in like new condition (used in total approx. 50 operating hours)! The decanter is for sale due to a change in technology, it works flawlessly! Manufacturer: YIXING HEAD SEPARATOR MACHINERY CO. LTD., CHINA Year of manufacturing date: 2020 Serial Number: LW250*1000 Machine signal: 02-001 Decanter indication number: 2647 Sludge formation capacity of decanter: 500 kg/h Main motor capacity: 7,5 KW Vice motor capacity: 3 KW Capacity: 1-5 m3/h Iijdpfx Acspu A D Ao Aok Netto weight of decanter: 1000 kg Material of wetted parts:1.4404 Feed volume flow: 0,5t – 3t/h Stainless steel Reference number: 2590

Condition: used, Year of construction: 2001, JOUAN SA Centrifuge KR25i Iedpjw Hcxcefx Ac Aoik - one accessory included in the machine, see photo - shipping possible at extra cost

Condition: used, Year of construction: 2025, A device for extracting aluminum chips and shavings (not aluminum dust), steel from machines and cleaning the workplace. The use of a side turbine makes the device ideal for connecting to machines where a large amount of chips is produced. It is equipped with a dust filter and a container (drawer) for pouring out the by-product. Machine characteristics Quick and easy filter replacement Large container for chips and shavings Quick access to the collection container Stably standing, compact housing Large container capacity Effective extraction Technical data ENGINE 0.75 kW VOLTAGE 400 V / 50 Hz SUCTION CONNECTIONS 1 x 100 mm EXTRACTION CAPACITY WITHOUT BAG 1800 m³/h EXTRACTION CAPACITY WITH BAG Iisdpswl Dn Ajfx Ac Aek 1520 m³/h ROTOR DIAMETER 350 mm DIMENSIONS 870 x 560 x 1170 mm WEIGHT 31 kg MACHINE USED: RETURNED, REPAINTED, VISIBLE SIGNS OF PAINT, 100% OPERATIONAL

Condition: used, This listing is for 1 of 2 MSE Micro Centaur Centrifuge. The unit is in full working condition and is ready for immediate release. The Micro Centaur is a bench top machine designed specifically for centrifuging small capacity tubes. Its small size and light weight make it ideal for transporting by hand, and using in laboratories where space is at a premium. The Micro Centaur is ideal for hospital and research laboratories, and for applications such as amino acid analyses, enzymatic, biochemical and immune assays, and for the separation of physiological fluids. Iodpfx Asxx Arqjc Ajik Technical specifications: Voltage: 220-240 V Power: 250 W Centrifuge speed: 6,500 rpm or 13,000 rpm Timer: up to 8 minutes Rotor: fixed angle with 12 x 1.5 / 2.0 ml Outer dimensions (W) x (D) x (H): 200 x200 x 190 mm

Condition: good (used), Year of construction: 2008, functionality: fully functional, heating capacity: 50 kW (67.98 HP), Wood chip system with 50 kW heating capacity Iijdpfev Ngq Aex Ac Ajk already disassembled complete with boiler, stocker unit, and discharge system

Condition: used, This listing is for a Star Lab C1000-STR-230EU Plate Centrifuge. Ijdpfx Asxx Aqtsc Aeik The unit is in full working condition and is ready for immediate release. The plate centrifuge makes the safe and quick spin down of droplets and condensation very easy. Sealed plates are loaded vertically and surface tension keeps samples in place so there is no danger of spilling samples. The centrifuge accepts all plates up to 25 mm high. An optional adaptor is available for centrifuging 48-well PCR plates and 0.2 ml PCR tubes or strips. Less than quarter the size of most plate centrifuges Accommodates two plates Rapid start to stop Use before and after thermal cycling to increase PCR yield Accepts skirted, semi-skirted and non-skirted plates Easy cleaning and maintenance Rotor capacity: Two plates, any style, up to 25 mm high Power supply: 230 V, 50/60 Hz Permissible Relative Humidity: < 85% Dimensions (W × D × H) 190 mm × 210 mm × 193 mm

Condition: used, This listing is for a Thermo Scientific FiberLite F21-8x50y Centrifuge Rotor. The unit is in full working condition and is ready for immediate release. The Thermo Scientific FiberLite F21-8x50y Centrifuge Rotor is a versatile and high-performance laboratory tool suitable for a wide range of applications. Here’s an organized overview of its key features, specifications, and applications: Key Features and Specifications Design and Capacity: Holds up to 8 tubes Capacity of 50 mL per tube Material: Constructed from lightweight, corrosion-resistant materials such as carbon fibre and aluminium Configuration: Fixed-angle design, with tubes positioned at a constant angle relative to the axis of rotation Compatibility: Works with various Thermo Scientific centrifuges, including: Heraeus Megafuge series Sorvall Legend series Safety Features: Automatic rotor recognition system Lid-locking mechanism to prevent accidental opening during operation Performance: Maximum speed: 21,000 rpm Maximum RCF: 52,400 x g Weight: Net weight of the rotor: 9.9 lb (4.49 kg) Iijdpfx Ajxx Appec Ajk Biocontainment: Features a bioseal lid to ensure samples remain contained and to protect users from hazardous chemicals Environmental Considerations: Energy-efficient design with reduced waste production Key Applications The FiberLite F21-8x50y Centrifuge Rotor is ideal for various laboratory procedures, including: Subcellular Separations: Isolating cellular components for research and analysis. Bacteria Pelleting: Concentrating bacterial cultures for further experiments. Lysate Clarification: Removing debris from cell lysates to obtain clear samples. Cell Membrane Studies: Analyzing the properties and functions of cell membranes. Sucrose Gradient Isolation: Mitochondria Endoplasmic reticulum Gradient separation of cells using solutions like Percoll, Ficoll, Optiprep, or Nycodenz This rotor combines advanced technology with practical safety and efficiency features, making it suitable for a variety of applications in research, clinical, and industrial laboratories.

Condition: used, This listing is for a Hettich EBA 12 Centrifuge. The unit is in full working condition and is ready for immediate release. Iiodpsxx Akgofx Ac Aek The Hettich EBA 12 Centrifuge is a laboratory centrifuge designed for separating substances or mixtures with a maximum density of 1.2 kg/dm³. It is suitable for various applications, including serology, cell washing, and pelleting particles from suspension. Technical specifications Voltage: 220-240V, 50 / 60Hz Current: 2,2A Power: 350W Maximum speed: 18000 rpm Technical specifications rotor Rotor number: 1118 Maximum rotor speed: 5000 rpm Dimensions tubes (∅) x (H): 1.5 x 6.5 cm External dimensions (W) x (D) x (H): 27 x 32 x 25 cm

Condition: used, This listing is for a Heraeus Biofuge Primo R Refrigerated Centrifuge. The unit is in full working condition and is ready for immediate release. The Heraeus Biofuge Primo R Refrigerated Centrifuge is an outstanding choice for small medical labs and research facilities looking for reliable and efficient sample processing. Its compact design pairs well with high-performance capabilities, making it ideal for a variety of applications. Key Features: Refrigerated Functionality: The centrifuge includes temperature control, ensuring that samples remain stable during processing, which is crucial for sensitive biological specimens. Versatile Rotor Options: The fixed angle rotor accommodates 6 x 50 mL tubes, but with the right rotor and adapter combinations, it can handle tube sizes ranging from 0.2 mL to 100 mL. This versatility allows for diverse applications from microcentrifugation to larger samples. User-Friendly Controls: A digital display shows all run parameters, while variable speed and RCF (Relative Centrifugal Force) controls let users set specific conditions. The QUICK RUN key is perfect for quick spins, enhancing efficiency. Safety and Reliability: Features include automatic rotor recognition, imbalance detection, and a dual lid-locking mechanism that ensures safe operation. It also has an electronic imbalance detection system to prevent accidents during runs. Applications: Cell Sedimentation: Ideal for isolating algae, yeast, bacteria, and cell organelles. Sample Preparation: Great for preparing DNA and protein precipitates, which are essential in molecular biology labs. Clinical Analysis: Suitable for blood and urine analyses, making it a valuable tool in medical diagnostics. Centrifugation of Microliter Tubes: Capable of processing standard test series in microliter tubes, ensuring versatility in routine analyses. Specifications: Iiedpfsxxz Svox Ac Aek Maximum Speed: 15,000 rpm Maximum RCF: 21,890 x g Control Speed: Adjustable from 300 to 15,000 rpm (±10 rpm) Noise Level:

Condition: used, This listing is for a Thermo Scientific FiberLite F14-6x250y Centrifuge Rotor. The unit is in full working condition and is ready for immediate release. The Thermo Scientific FiberLite F14-6x250y Centrifuge Rotor is a robust and highly functional component designed for a variety of laboratory applications. Here is a comprehensive overview of its key features, specifications, and benefits: Key Features and Specifications Capacity: Accommodates 6 tubes with a volume of 250 mL each Maximum Speed: 10,000 rpm (up to 14,000 rpm for compatible centrifuge models) Maximum RCF: 15,316 x g (up to 30,100 x g for some compatible models) Rotor Angle: Fixed angle of 23° K Factor: 2737 Maximum Tube Dimensions: Length: Up to 125 mm Diameter: Up to 62 mm Radius (Metric): Minimum radius of 3.7 cm Biocontainment: Yes, designed for safe handling of samples Key Benefits Lightweight and Innovative Construction: Made from carbon fibre, allowing for rotor designs that are not feasible with traditional metal technologies. Durability: Corrosion and fatigue-resistant materials ensure the structural integrity of the rotor, promoting long-term reliability. Long Warranty: Backed by a 15-year warranty, providing confidence in the product’s quality and performance. Iiedpfxsxxz Sie Ac Ajk Auto-Lock Rotor Exchange: Features a secure, push-button rotor exchange mechanism that allows for quick swapping of rotors in less than three seconds, streamlining the workflow in the laboratory. This centrifuge rotor is tailored for both research and clinical settings, offering unique advantages that enhance user experience and operational efficiency while delivering reliable performance.

Condition: used, This listing is for a Diamed Diacent-12 Centrifuge. The unit is in full working condition and is ready for immediate release. The Diamed Diacent-12 Centrifuge is a compact and efficient laboratory instrument designed for specific applications in immunohematology and other related fields. Here’s a concise overview of its key specifications, features, and applications: Specifications: Dimensions: 26 x 18 x 32 cm Iijdpsxxz Nusfx Ac Ajk Weight: 4.8 kg Relative Centrifugal Force (RCF): 1006 g Rotor Speed: 3000 RPM Power Input: 230 V Frequency: 50-60 Hz Power Consumption: 70 W Time Setting: Up to 10 minutes Safety Features: Equipped with a break and electromagnetic lock for secure operation. Key Features: Automatic Head Detection: The centrifuge can automatically identify the head type in use, allowing for seamless program selection tailored to specific applications. User-Friendly Interface: The panel PC touch-screen interface provides easy navigation with intuitive icons, making it accessible for all users. Multi-Language Software: This feature enhances usability across different regions and user preferences. Compliance: Meets CE compliance as per IVD Directive 98/79/EC, ensuring it adheres to international safety and performance standards. Applications: Immunohematology: Ideal for blood typing and cross-matching blood samples, critical in transfusion medicine. Cell Washing: Effectively separates cells from supernatant for various laboratory applications, including sample preparation and analysis. Centrifugation of Tubes and ID-Cards: Supports a range of laboratory procedures, enhancing efficiency in processing samples.

Condition: used, This listing is for a Thermo Scientific TX-400 Centrifuge Rotor with Buckets. The unit is in full working condition and is ready for immediate release. Supplied with x4- 75003655 Round Buckets Maximize the efficiency of your centrifugation processes with the TX-400 rotor, specifically designed for use with various Thermo Scientific centrifuges. Key Features: Capacity: Accommodates 4 x 400 mL samples, making it suitable for larger volumes in a single run. Iijdpfx Acjxxzats Aok Impressive RCF: Achieves a maximum relative centrifugal force (RCF) of 4696 x g, allowing for effective sedimentation of a variety of sample types. Speed Capabilities: Operates at a maximum speed of 5000 rpm, providing flexibility for different centrifugation protocols. Tube Specifications: Diameter: 80 mm for standard tubes. Length: Capable of holding tubes up to 125 mm in length. Radius: Designed with a radius of 16.8 cm for optimal performance. Type: Features a swinging bucket design, allowing for smooth and efficient separation as the buckets swing outward during centrifugation. Biocontainment Certified: The rotor is certified for biocontainment by CAMR, ensuring safety when working with biological samples. Compatibility: Specifically designed for use with the following Thermo Scientific centrifuges: Sorvall Legend X1 Sorvall ST 16 Multifuge X1 Megafuge 16 SL 16

Condition: used, This listing is for a Sorvall Heraeus 75002000 Centrifuge Rotor with Buckets. The unit is in full working condition and is ready for immediate release. Supplied with x4- 75002002 Round Buckets Enhance your laboratory's centrifugation capabilities with the Sorvall Heraeus 75002000 rotor, crafted for efficient performance in various applications. Key Features: Manufacturer: Sorvall Heraeus, known for reliability in laboratory centrifugation. Part Number: 75002000, ensuring you have the correct rotor for your specific needs. Maximum Speed: Capable of reaching up to 4,700 RPM, providing effective and rapid sample separation. Rotor Type: Swing Bucket Rotor design allows for smooth operation and optimal pelleting of samples as buckets swing out during centrifugation. Capacity: Accommodates 4 x 400 mL sample tubes, making it suitable for moderate volume applications. Iodpfxoxxy Ucs Ac Ajik Maximum Load: Designed to support a max load of 540 g, ensuring stability even with heavier samples. Maximum RCF: Achieves a maximum relative centrifugal force (RCF) of 4618 x g, which is effective for a wide range of laboratory separation tasks. Compatible Centrifuges: Sorvall Legend Mach 1.6 Heraeus Multifuge 1S

Condition: used, This listing is for a Thermo Scientific 75005701 Centrifuge Rotors and Buckets. The unit is in full working condition and is ready for immediate release. Supplied with 75005702 Buckets. The Thermo Scientific 75005701 Centrifuge Rotor and Bucket are designed for use with the Thermo Scientific ST8 Bench top Centrifuge. This rotor and bucket combination offers enhanced functionality and versatility for efficient sample processing. Key Features: Compatibility: Specifically designed for use with the Thermo Scientific ST8 Bench top Centrifuge. Efficient Sample Processing: The rotor and bucket combination enables seamless integration with the centrifuge, optimizing performance for reliable and reproducible results. Versatile Capacity: Accommodates up to 4 buckets, providing flexibility to process different sample volumes and formats. Durable Construction: Constructed from high-quality materials, ensuring longevity and chemical resistance. Easy Installation and Removal: Precision-engineered design allows for quick and hassle-free rotor changes, minimizing downtime and optimizing laboratory workflow. Compatibility with Thermo Scientific Accessories: Compatible with a range of Thermo Scientific accessories, such as bucket adaptors and cushion adaptors, expanding the versatility of your centrifuge setup. Applications: The Thermo Scientific 75005701 Centrifuge Rotor and Bucket are suitable for various applications, including: Biological sample processing Cell culture Iedpfoxxy H Sex Ac Asik Clinical specimen processing Laboratory testing and analysis

Condition: used, This listing is for a Heraeus Instruments 7570 E Centrifuge Buckets. The unit is in full working condition and is ready for immediate release. The Heraeus 7570 E Rotor Buckets are designed to be used with compatible centrifuge rotors, providing flexibility and efficiency for various laboratory applications. Here’s a quick overview based on your mention of the 4 x Heraeus #7570 E Rotor Buckets: Heraeus #7570 E Rotor Buckets Key Features: Max Capacity: Each bucket has a maximum capacity of 600g, allowing for the centrifugation of a variety of sample types, including biological and chemical solutions. Compatibility: These buckets are specifically designed for use with Heraeus swinging bucket rotors, enhancing their versatility in centrifuge applications. Efficient Sample Processing: The design of the buckets facilitates even weight distribution and efficient separation, contributing to improved outcomes in sample processing. Material: Constructed from durable materials to withstand the rigors of repeated centrifugation cycles, ensuring reliability over time. Isdpjxxy H Eefx Ac Aeik Applications: Ideal for preparing biological samples, including cell cultures, blood products, and other laboratory specimens that require high-speed centrifugation. Benefits: Scalability: Having 4 buckets allows for simultaneous processing of multiple samples, increasing throughput in laboratory settings. Versatility: Supports various sample sizes and types, making it a valuable addition to any lab utilizing Heraeus centrifuges.

Condition: used, This listing is for a Thermo Scientific 75005701 Centrifuge Rotor. The unit is in full working condition and is ready for immediate release. Thermo Scientific 75005701 Centrifuge Rotor The 75005701 Centrifuge Rotor is a high-capacity swinging bucket rotor engineered for use with Thermo Scientific Sorvall ST8 and Heraeus Megafuge 8 centrifuges, designed for efficient and safe sample processing. Key Features: Capacity: Holds 4 round buckets, allowing for versatile sample volumes and formats, ideal for various laboratory applications. Swinging Bucket Design: This design promotes efficient sample processing, enabling the rotor to tilt during centrifugation for effective separation and easier loading/unloading. ClickSeal Biocontainment Lids: These lids ensure secure, one-handed operation, minimizing contamination risks and enhancing user safety during sample handling. Adaptors for Blood Collection Tubes: Specifically designed adapters accommodate 5/7mL and 10mL blood collection tubes, making it suitable for clinical and research applications involving blood samples. Compatibility: Tailored for use with Thermo Scientific Sorvall ST8 and Heraeus Megafuge 8 centrifuges, ensuring seamless integration into laboratory workflows. Specifications: Type: Swinging bucket rotor Capacity: 4 round buckets Adaptors: Available for blood collection tubes (5/7mL and 10mL) Compatibility: Thermo Scientific Sorvall ST8, Heraeus Megafuge 8 centrifuges Ijdpfx Aexxyxbsc Asik