Used Chipboard for sale (244)

Condition: new, Year of construction: 2026, Single-shaft shredder MRZ 530 Included: Eco Ring Rotor (for reduced energy consumption) Options: Veneer and paper scraper + €970 net * recommended for extremely thin materials with a thickness of less than 3 mm Our mütek single-shaft shredder MRZ 530 shreds a wide variety of materials such as residual wood of all kinds, softwood, chipboard and hardboard, pallets, construction lumber, demolition wood, carpet, cables, paper, cardboard and plastics. The machine is characterized by a robust design that guarantees consistent quality in continuous operation. We would be happy to offer you a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight forwarder, and we will document the test with pictures and videos. Dwedpfed Db N Ijx Aptsb Machine data: Motor: 11 kW; 400 V - 50 Hz - 3 phase, Knives: multi-reversible, Rotor diameter: 260 mm, Control: Siemens S7-1200 PLC, Hopper (mm) 510 x 810 mm, Hopper volume approx. 0.4 m³, Hydraulically operated slide, Screen size optional (10 - 40mm), Suction nozzle Ø 160 mm, Weight approx. 1,000 kg, Dimensions approx. 1550 x 1100 x 1640 mm, Moisture content of the raw material: must be below 30% (dry basis). Standard included: • Fast hydraulics • Profile rotor • Control cabinet with Siemens PLC control • Automatic star/delta start • Automatic OFF when the rotor is idling • Removable suction channel • Speed 70 - 100 RPM for higher throughput • Cycle control to avoid idle times • Performance-enhancing step control of the hydraulic slide • Stable guides for the hydraulic slide Further shredder options: - Raise the shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Inclined conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2000 mm + - 100 mm - Over-belt magnet + €5,980 net - Control for conveyor belt and over-belt magnet + €2,750 net (Start and stop synchronized with the shredder) Requirements for the input/raw material: - The moisture content (dry basis) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

Condition: new, Shelving frame column cover. The Mega-M storage rack leg bumper is made of yellow lacquered steel. It has 4 holes for permanent installation in the floor and lateral holes for attaching e.g. a horizontal beam. The buffer provides greater safety for forklifts to move around the warehouse, reducing the risk of serious racking repairs. -Made of yellow lacquered steel. -Universal and easy to install. -Mounted on the front side of the racking. -Makes it possible to attach horizontal beams. -Used in industry to protect shelves from mechanical damage. -Increases safety, reducing warehouse maintenance costs. The offer concerns the leg bumper: Product code: MTP001334 - Height: 400 mm - Width: 170 mm - Length: 300 mm - Metal thickness: 4 mm - Mounting hole diameter: 15 mm - Colour: RAL1023 yellow - Pallet quantity : 108 pieces Net price : 11 euro each. We have a wide range of shelving components, both new and used: frames, crossbars/beams and shelving fillings: crossbeams, WEMA gratings, mesh shelves or chipboards. Prices quoted are for the sale of wholesale quantities for export outside Poland, please contact us for details. Would you like to check wholesale and retail prices within Poland please contact us. * The above price is valid for a minimum purchase of one pallet. * Transport throughout Europe possible. Dwedpfsm Sg Dhex Aptsb * The aforementioned offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.

Condition: new, Year of construction: 2026, Technical data: Dedpfx Apjvyrhbstswb Control system: Multi-axis real-time interpolator with active trajectory prediction, LAN and EtherCat communication, sampling time below 2 ms, RTCP, remote service access. Working area: X: up to 6300 mm; Y: up to 1100 mm Z-axis clearance: 200 – 400 mm Drive system: Servo drives with EtherCat protocol; X, Y axes with hardened and ground helical racks, accuracy class 6; Z axis with ball screw, accuracy class 5. Linear guides: Trapezoidal rails; Y-axis double guide size 35; X and Z axes double guide size 25. Travel speed: up to 60 m/min Gantry drive: Single-sided Software resolution: up to 0.0001 mm Positioning accuracy: 0.01 mm Electrospindles: 12 kW to 25 kW, inverter-driven Tool taper: HSKF63 Maximum electrospindle speed: 24,000 rpm (options for 6,000 / 40,000 / 50,000 rpm) Construction: Welded, ribbed, stress-relieved and precision-machined steel structure Table type: Console type, pneumatic vises Equipment options: - Swiveling/rotary head - Additional angular/rotary axes - Angle aggregates - Material positioning and correction via camera, laser, measuring probes - Revolver-type tool magazine - Beams moved automatically or manually - Vises moved automatically or manually - Pneumatic clamps - Tool cooling by oil mist or freezing nozzle - Automatically operated extraction base - Integration with industrial robot - Compensation mapping - Chip conveyor - 3D CAD/CAM software #ploter #CNC #millingrouter #machiningcenter #3axis #4axis #5axis #3D #3Dprint #MDF #HPL #Plywood #chipboard #steel #aluminum #brass #stainlesssteel #castiron #polypropylene #polycarbonate #acrylic #fermacell

Condition: good (used), clear span: 1,350 mm, frame height: 2,000 mm, Technical data for the packing table: Manufacturer: Stow Type: Pal Rack NS Basic data: Total width: approx. 1,550 mm Total depth: approx. 1,000/400 mm Total height: approx. 2,000 mm Number of levels (1,000 mm deep): 02 pcs. Number of levels (400 mm deep): 02 pcs. Working height: approx. 938 mm The scope of delivery includes: 02x shelf uprights, used Material color: light blue Frame profile: PNFB12 Profile dimensions: 85 x 65 x 1.75 mm Upright height: 2,000 mm Stand depth: 1,000/400 mm Incl. cross and diagonal struts, base plates The uprights are pre-assembled ( bolted framework ) 02x foot plates, new Material color: blue Total width: approx. 100 mm Total depth: approx. 110 mm 08x Shelf crossbars, used Material color: orange Beam type: PNBH0488 Box profile: 80 x 50 mm clear width: 1,350 mm 16x locking pins, used Version: sendzimir galvanized For securing the side rails against unintentional lifting out 01x chipboard, second-hand Chipboard thickness: 38 mm Chipboard width: 1,550 mm Depth of chipboard: 1,000 mm Surface: coated if required (two-piece if necessary) 01x chipboard, used Thickness chipboard: 38 mm Chipboard width: 1,330 mm Depth of chipboard: 1,000 mm Surface: coated if required (two-piece if necessary) 02x chipboard, used Thickness chipboard: 38 mm Chipboard width: 1,330 mm Depth of chipboard: 400 mm Surface: possibly coated (two-piece if necessary) 24x locking brackets, new Version: galvanized f. Crossbeam width: 50 mm The pictures serve to illustrate the material. Dwsdpfx Aern S Udjptjb The material color may vary. - The packing tables are picked unassembled; - The shelf stands are pre-assembled; - The production time is usually approx. 3 - 5 working days. General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: new, 0 600 x 800 mm Dwsdpfx Aex Iwfmjpteb Motor output 15 kW 0 0,6 m³ Diameter of the motor 260 mm Dimensions (L/W/H) 1.805 x 1.118 x 1.646 mm Weight ca. 1.100 kg Hoku single-shaft shredder H 600 Compact, robust, high throughput ----- Technical manufacturer description: The H600 high-performance shredder with its flexible application options can shred all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer scraps, etc.) and achieves a high and, in the case of bulky materials, achieves an enormous reduction in the volume reduction of the material. The hydraulically controlled pusher feeds the wood waste to be shredded to the cutting area of the rotor and is controlled automatically and automatically and load-dependent. The high-performance electric rotor made of has a diameter of 252 mm and operates with a rotor speed of rotor speed of 85-95 rpm. The concave-ground, aggressive and 4-fold rotating knives / reversible cutting crowns are located in milled knife pockets knife pockets on special knife carriers. This highly efficient system guarantees, through the reduction of the cutting gap between the counter knife and rotor, it guarantees high throughput, low energy consumption and optimum optimised discharge of the shredded material. Clamp size (10–60 mm) depending on sieve perforation. Technical data: Hopper opening 600 x 800 mm Hopper capacity 0.6 m³ Working width of the rotor 600 mm Rotor diameter 260 mm Drive power 15 kW Rotor speed 90 rpm Number of knives: 14 pieces + 2 pieces Type and size of knives: concave/40 x 40 mm, reversible cutting crowns concave/ 30 x 30 mm, broaching knives Screen perforation: 10-60 mm connected load: 400 V +/- 5% / 50 Hz included: Switch cabinet (Rittal) with 5 m cable Electrical control (SPS Siemens) Star-delta start-up Rubber oscillating elements E-rotor with blade pockets milled into the profile Gear limit switch 1st row of knives Hold-down device on the pusher for long and large parts Large 40 x 40 mm blades for optimum material feed Very robust gearbox Special broaching blade to prevent lateral jamming ----- Price of the above mentioned machine on request! ----- Prices plus packaging and shipping, plus VAT. (technical data according to manufacturer - without guarantee !)

Condition: new, Year of construction: 2026, THE MACHINE HAS A TOOL STORAGE EQUIPPED WITH 6 ISO30 CONES !!! CNC 2030 ATC CNC Router is a precise machine constructed in Poland, it is used to process many engineering materials, i.e. wood, wood-based materials (chipboard, MDF, OSB etc.), plastics (plexiglass, PVC, HPL etc.), composites (dibond, carbon, alucobond), soft metals, etc. The ATC series machines have an additionally reinforced structure and the applied AC servo drives on each axis, coupled with an affordable price, leave the competition far behind. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 2100 x 3100 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 300 mm DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table Djdpfx Apoin Ek Djtewb

Condition: new, Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) Power: 18,5 kW Shaft length: 550 mm Shaft diameter: 222 mm Shaft RPM: 120 rpm Number of cutting knives: 14 Dsdpfx Aegw Sxzoptjwb Granulation: 10-30 mm Capacity: up to 4 m3/h (depending on the wood) Material discharge opening: 160 mm Material: Plastics, cardboard, wood (chipboards, MDF boards, waste,...) Filling opening: 946 x 567 mm Dimensions L/W/H: 1880/1120/1670 mm Weight: approx. 1250 kg 2 years warranty or 2000 working hours Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: good (used), It is ideal for frame depths of 1100 mm. Other sizes are shown in the pictures. If you require shelving or accessories in other configurations or designs, please contact us. Dwedehpxufopfx Aptjb We offer a comprehensive range of new and used shelving, as well as accessories, and will be happy to assist you with your planning. Additional accessories available, such as: frame, corner, and impact protection, push-through guards, chipboard, grating, rear wall grating, and deep shelf supports. Shipping: Please inquire about shipping costs, providing your postal code and location, as well as the desired quantity of items. Additional service offerings: Planning, shelving assembly/disassembly, purchase/sale. Changes and errors in technical data, specifications, and prices, as well as sales subject to change without notice!

Condition: used, ONLY BEAMS for Stow pallet racking: Beam sizes: 2900*120 mm 3600*140 mm 1800*80 mm 3500*145 mm 2700*80 mm 1900*120 mm 4400*160 mm 3700*160 mm If you require racking or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used racking, as well as accessories, and will be happy to assist you with your planning. Other accessories available include: Frame, corner, and end protectors, push-through guards, chipboard, grating, back panel grating, and deep shelf supports. Shipping: Please request shipping costs by providing your postal code, location, and the desired quantity of items. Dsdpehryh Hefx Aptowb Other service offerings: Planning, racking installation/disassembly, purchase/sale Changes and errors in technical data, information, and prices, as well as sales subject to prior sale!

Condition: as good as new (ex-display), Year of construction: 2026, travel distance X-axis: 1,300 mm, travel distance Y-axis: 6,300 mm, travel distance Z-axis: 300 mm, Technical Data: Control System: Multi-axis real-time interpolator with active trajectory prediction, LAN communication, EtherCat, sampling time below 2ms, correction map, RTCP tool tip tracking, remote service access. Working Area: 1300×6300 mm Z-Axis Clearance: 300 mm Dsdon Nv Rcjpfx Aptswb Drive System: Servo drives with EtherCat protocol, X and Y axes with helical, hardened and ground racks (accuracy class 6), Z axis with precision class 6 ball screw, planetary gearboxes with backlash less than 1’. Linear Bearings: Linear guides with preloaded tension. Traverse Speed: Up to 30 m/min Software Resolution: Up to 0.0001 mm Positioning Accuracy: 0.01 mm Electrospindles: 15 kW inverter-driven, liquid-cooled. Tool Taper: HSKF63 Maximum Electrospindle Speed: Up to 24,000 rpm Construction: Welded steel, ribbed, stress-relieved, precision machined from a single setup. Table Type: Beam table Equipment Options: - Schmalz dual-circuit beam system - Schmalz pneumatic and mechanical workpiece clamps - Positioning stops - Dual-zone operation capability - Chip extraction readiness - Chip conveyor - Turret tool magazine and 2 linear magazines (26 tools) - Drilling aggregate: 12 vertical tools, 4 horizontal tools, 2x saw blades - Functions: correction map and intelligent energy recovery - Advanced safety system - Compatibility with CAD/CAM programming software (for furniture, fronts, stairs, windows, doors, and other components) - Automatic central lubrication - Control cabinet air conditioning - Remote service access, remote diagnostics - Tool diameter and length measuring probe with diameter compensation via control system - Laser projection for workpiece positioning - Machine designed in the Industry 4.0 concept - Tool life option #ploter #CNC #router #millingrouter #machiningcenter #3axis #4axis #5axis #3D #3Dprint #MDF #HPL #Plywood #chipboard #steel #aluminium #aluminum #BLUM

Condition: new, Technical data for the pallet racking system: Racking system: SSI Schäfer Type: PR 600 Technical data for the installation: Number of racking rows: 01 unit Length per racking row: approx. 7,500 mm Number of bays per racking row: 03 units, each 2,400 mm Number of levels including base level: 02 units Included in the scope of delivery: 04x Pallet racking uprights, new Material color: Sendzimir galvanized Material color of base plates: RAL 5010 Enzian Blue Upright type: P73 Upright profile: 75 x 75 x 2.00 mm Incl. cross and diagonal bracing, Base plates Dwedpfskr Uzbsx Aptob The uprights are delivered unassembled (bolted frame) 2,350 mm high 800 mm deep Note: The racking uprights are delivered unassembled. We can pre-assemble the racking uprights for an additional charge of €17.50 plus 19% VAT. 12x Pallet racking crossbeams, new Material color: RAL 7035 light grey Box profile: 80 x 40 mm Crossbeam type: TRV1-240-084-30CE Agraffe: 5 hooks Clear width: 2,400 mm Max. load per pair of crossbeams: 1,600 kg, with evenly distributed load 06x Chipboard, 2nd choice, used Thickness: 22 mm Dimensions: 2,380 x 800 mm Surface: possibly coated (possibly in two parts) 48x Z-brackets for locking/inserting chipboard, surface galvanized Suitable for chipboard flooring from 22 - 38mm, can be rotated and inserted on both sides For a width of 40 mm 24x Locking pins, new Design: fully galvanized For securing the longitudinal beams to prevent accidental lifting 16x Bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 08x Shims, new Design: fully galvanized For leveling the racking uprights that are installed on uneven ground 01x Load signs with information on bay and frame loads, manufacturer and batch number Dimensions: 297 x 210 x 2 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: new, Year of construction: 2026, 1525 ATC milling ploter THE MACHINE HAS A TOOL STORAGE EQUIPPED WITH 6 ISO30 CONES !!! CNC 1525 ATC milling plotter is a precise machine constructed in Poland, it is used to process many engineering materials, i.e. wood, wood-based materials (chipboard, MDF, OSB etc.), plastics (plexiglass, PVC, HPL etc.), composites (dibond, carbon, alucobond), soft metals, etc. The ATC series machines have an additionally reinforced structure and the applied AC servo drives on each axis, coupled with an affordable price, leave the competition far behind. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 1500 x 2500 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 300 mm DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist Dwsdpfoin Eyvex Aptob - any size of the working table

Condition: new, Year of construction: 2026, Technical Data Control System: Multi-axis real-time interpolator with active trajectory prediction, LAN and EtherCat communication, sampling time below 1 ms, RTCP, remote service access. Working Area: X: 2000-4700 mm; Y: 3000-30000 mm Z-Axis Clearance: up to 3000 mm Drive System: Servo drives with EtherCat protocol; X, Y, Z axes equipped with hardened, ground, helical racks accuracy class 6 Linear Bearings: Trapezoidal rails; quadruple guideway size 35 for Y axis, triple guideway size 35 for X and Z axes Traverse Speed: X, Y up to 25 m/min; C, A up to 6000 degrees/min Program Resolution: 0.0005 mm Positioning Accuracy: 0.01 mm Gantry Drive: Dual-sided master/slave with gantry angle correction Electrospindles: up to 50 kW Dodpfx Aewhxcgsptowb Electrospindle Inverter: Yes Maximum Electrospindle Speed: 24,000 rpm (optionally 6,000 – 40,000) Construction: Welded steel, stress-relieved, precision-machined gantry design Table Type: Modular T-slot (steel or aluminum), separated from the main construction Available Additional Options: 3D printing head Tool cooling Tool changer: linear, mobile linear, turret, or chain type Cutting saws Laser scanner Wireless measurement probe Machining area separators Compensation map Roll-up roof Vacuum table Suction foot for 5-axis heads Dedicated CAD/CAM software 3D granulate printers can process a variety of plastics such as PLA, ABS, PETG, polyamides, or polypropylene. #router #CNC #millingmachine #millingrouter #machiningcenter #3axis #4axis #5axis #3D #3Dprint #MDF #HPL #Plywood #chipboard #steel #aluminum #brass #stainlesssteel #castiron #polypropylene #polycarbonate #acrylic #fermacell

Condition: used, Technical specifications for the wide-span racking: Racking system: Stow Type: Midirack Dsdpsv Hzfvefx Aptowb Specifications for the installation: Number of rack rows: 01 unit Rack length: 2,810 mm Number of bays per rack row: 01 unit Number of levels incl. ground level: 05 units Scope of delivery includes: 02x End frames, used Material finish: Sendzimir galvanized Upright profile dim.: 55 x 45 x 1.5 mm incl. horizontal and diagonal bracing, base plates The uprights are pre-assembled 2,000 mm high 700 mm deep 10x Beams, used Material color: yellow Z-profile: 74 x 30 mm Connector: 2 hook Clear span: 2,700 mm 20x Safety pins, used Material finish: Sendzimir galvanized For securing the beams against accidental dislodging 05x Chipboard panels, used Thickness: 22 mm Width: approx. 2,680 mm Depth: approx. 690 mm Surface: possibly coated (possibly two-part) Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transportation or shipping is required beyond collection, additional costs will apply. These can be requested from us depending on the delivery location and scope.

Condition: new, Year of construction: 2026, The CNC 2030 SPECIAL milling plotter is a high-precision machine built in Poland, used for machining many engineering materials, i.e.: wood, wood-based (chipboard, MDF, OSB, etc.), plastics (Plexiglas, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. CONSTRUCTION: The plotter is made entirely of high quality steel. During the manufacturing process, all components undergo a special heat treatment. WORKING SURFACE: The working area of our machine tool is 2100 x 3100 [mm]. It is possible to manufacture the machine with a different working area. Z-AXIS RANGE AND GANTRY CLEARANCE: The Z-axis range is 200 mm as standard. However, it is possible to increase it to 400 mm. DRIVES: High-resolution, high-power digital motors have been used to drive our machine tools, ensuring adequate acceleration and speed in each direction. The X and Y axes use classic and well-proven helical slats, which ensure long service life and precision, and a high-performance ball screw is used to drive the Z axis. SPRING: A powerful, liquid-cooled and durable high-end brushless spindle is used to drive the cutting tool. The spindle bearings are high-quality machine bearings, which are very quiet and guarantee above-average durability. The spindle speed ranges from 6 to 24,000 rpm. SOFTWARE: The machine has been provided with suitable, easy-to-use CAD/CAM software in the latest version. Dwsdpfoirmgfsx Aptob CONTROL: This is done by means of a controller, which has its own processor and operating memory to ensure stable and reliable operation. The controller has a function to return to further operation after power loss so there is no need to initialise the program from scratch. VACUUM TABLE: The table is made with raster technology, thanks to the sections used we can separate any part of the table with a seal. This allows us to adapt the working area to the specific workpiece. A well-chosen vacuum pump according to the size of the table will guarantee uniform suction of the material to the table. 6-POSITION LINEAR TOOL MAGAZINE: The linear magazine enables an automatic machining process. It is used for multi-tool machining. In addition, it allows for faster and more efficient work and contributes to the elimination of operator errors. The standard magazine on our machines is for 6 positions. It can be extended to 16 positions. Oscillating knife The oscillating knife is a state-of-the-art head fitted to CNC machines, designed for cutting low-density materials. The blade moves up and down and thus 'slices' the material. This makes it possible to cut thick, soft materials - FOAM foam, magnetic foils, corrugated cardboard, textiles.

Condition: good (used), Crossbars: 1250*40*40 mm If you require shelving or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used shelving, as well as accessories, and will be happy to assist you with your planning. Further accessories, such as: Frame, corner, and impact protection, push-through guards, chipboard, grating, back panel grating, and deep shelf supports are available. Shipping: Please inquire about shipping costs, providing your postal code and location, as well as the desired quantity of items. Dsdpfx Apeh Izuhstewb Additional service offerings: Planning, shelving assembly/disassembly, purchase/sale Changes and errors in technical data, specifications, and prices, as well as sales subject to prior sale!

Condition: new, Year of construction: 2026, Router CNC2030 ATC 4 axes, tilting spindle +/- 90 degrees working area 2100 x 3000 [mm] The ATC series of plotters was created for professional use in large industrial plants and factories. These machines are designed to process a wide range of materials. In order to meet the demands of heavier machining, the ATC machines feature an additionally reinforced construction and more powerful AC servo drives on each axis. A vacuum work table is standard on these machines. It is also possible to install a hybrid table. Plotters in this series are equipped as standard with automatic tool changing, a six-position linear magazine and a tool height sensor. The solutions used significantly speed up the machining process requiring the use of several cutters. Materials to be machined: wood wood-based materials (chipboard, MDF, OSB, etc.) plastics composites PVC non-ferrous metals (aluminium, brass, copper, etc.) CONSTRUCTION: The structure of the machine tool is made of steel and cast iron which gives it high rigidity, as well as resistance to the overloads associated with the machining process. WORKING SURFACE: The usable area of our machine tool is 2100 x 3000 [mm]. MATERIAL CLAMPING: The machine is equipped with a vacuum table. It is possible to install a hybrid or T-table. Z-AXIS RANGE AND GANTRY CLEARANCE: The Z-axis range is 300 [mm] as standard (can be increased). DRIVES: Dodpfx Asirfavsptowb SERVO motors have been used to drive our machine tools, ensuring adequate acceleration and speed in each direction. The X and Y axes are driven using classic and proven helical rollers to ensure long service life and precision, while the Z axis is driven using a high-performance ball screw. All axes move on rail guides.... SPRING: A powerful, liquid-cooled and durable high-end brushless spindle is used to drive the cutting tool. The spindle bearings are high-quality machine bearings, which are very quiet and guarantee above-average durability. The spindle speed ranges from 6 to 24,000 rpm. The power supply is provided by an inverter, which has more power than the spindle, which protects against speed drops when operating under heavy load. TOOL STORAGE: The machine tool comes standard with a linear tool magazine equipped with 6 ISO30 cones. SOFTWARE: The machine has been supplied with the appropriate CAD/CAM software in its latest version. The software makes it possible to design parts quickly and easily, which the programme then converts into so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is controlled by a controller, which has its own processor and operating memory to ensure stable and reliable operation. The machine controller is equipped with active vector analysis functions, so that operation of the machine is smooth and there is little overshoot during processing. The controller has a recovery function to continue operation after a power loss, so there is no need to initialise the programme from scratch. The controller's on-board memory allows the machine to work without having to load the programme each time.

Condition: good (used), Note: - The images are for illustrative purposes. - The material color may vary. - The workbenches are supplied disassembled. - The shelving uprights are pre-assembled. - The production time is typically approximately 3-5 working days. The scope of delivery includes: 01 x Used workbench Dimensions: 2,900 x 1,000 x 938 mm Consisting of: 02 x Used workbench uprights Manufacturer: Bito Type: PL 38 Material color: sendzimir galvanized Frame profile: P 25 Profile dimensions: 90x65x2.5 mm Adjustment grid: 75|75 mm Incl. transverse and diagonal braces, Base plates The uprights are pre-assembled (bolted framework) 900 mm high 1,000 mm deep 02 x Used workbench crossbars Manufacturer: Bito Type: PL 38 Material color: green Box profile: 127x50 mm Crossbar type: PT27.127LN Design: Head crossbars Clip type: 3 HK 2,700 mm clear width 02 x Used workbench crossbars Manufacturer: Bito Type: PL 38 Dwsdpfx Aoziy Htjptsb Material color: green Box profile: 127x50 mm Crossbar type: PT27.127LN Clip type: 3 HK 2,700 mm clear width 08 x Used locking pins Used chipboard Material thickness: 38 mm Number of panels: 01 | 2,900 x 990 mm (two-part) 01 | 2,680 x 990 mm (one-part) 16 x Wing nuts Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: good (used), For pallet racking with a frame depth of 800 mm. Size: 530x800 mm Load capacity: 140 kg / panel If you require racking or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used racking, as well as accessories, and we will be happy to assist you with your planning. Additional accessories available, such as: Frame, corner, and impact protection, push-through protection, chipboard, grating, back panel grating, and deep shelf supports. Shipping: Dwedpfxogz H R Ij Apteb Please request the shipping costs, providing your postal code and location, as well as the desired quantity of items. Additional service offerings: Planning, racking assembly/disassembly, purchase/sale. Changes and errors in technical data, information, and prices, as well as items being sold subject to prior sale, are reserved!

Condition: new, Storage platform 4,000 x 15,000 mm, load capacity 500 kg/m² The scope of supply includes: 4 uprights, single-sided 100 x 100 x 3 mm 4 uprights, double-sided 100 x 100 x 3 mm 6 main beams C+300 x 3 x 4,190 mm 15 cross beams S+300 x 2 x 4,800 mm 30 mounting angles 4 diagonal braces Dedpfxod Htrys Aptjwb 27 chipboard panels P6, 3000 x 850 x 38 mm, underside white, topside natural Underside white, topside natural including fixing material including load capacity signs Dimensions, technical data Steel structure: 4,000 x 15,000 mm Floor area: approx. 60 m² Height, top edge of flooring: freely selectable up to 3,500 mm (other heights on request) Clear height, underside: top surface minus 338 mm Load capacity: 500 kg/m² Uprights: 100 x 100 x 3 mm Main beams: C-profiles C+300 x 3 mm Cross beams: Sigma profiles S+300 x 2 mm Flooring: 38 mm chipboard, one side white Uprights in the following standard colors: RAL 7035, light gray RAL 7016, anthracite gray RAL 3000, fire red RAL 5003, sapphire blue Other colors on request! Accessories, such as stairs, railings, etc., are not included in the scope of supply. These can be supplied at an extra cost. (Prices on request) Our services at a glance: (Prices on request) Assembly, installation Our general assembly conditions apply Shelf inspection Shelf inspection according to DIN EN 15635, performed according to the requirements of BGR 234, visual inspection for all shelving systems Delivery with our own fleet (without unloading)

Condition: good (used), Without frames, only crossbars: Crossbars 3600*110 mm, 451 pcs, 22 EUR Djdpfxspu Acfe Aptewb Crossbars 3600*120 mm, 432 pcs, 23 EUR Crossbars 3600*130 mm, 20 pcs, 24 EUR If you require shelving or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used shelving, as well as accessories, and will be happy to assist you with your planning. Further accessories available, such as: Ppqe7 Frames, corner protectors, and impact protection, push-through guards, chipboard, grating, rear wall grating, and deep shelf supports. Shipping: Please inquire about the shipping costs, providing your postal code and location, as well as the desired quantity of items. Further service offerings: Planning, shelving assembly/disassembly, purchase/sale. Changes and errors in technical data, specifications, and prices, as well as sales subject to change without notice!

Condition: good (used), Ideal for pallet racking systems with a frame depth of 800 mm and 2700 mm crossbars. It is also suitable for other applications. Size: 1340*820 mm (55*105 mm) Load capacity: approximately 400 kg/m2 If you require racking or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used racking systems as well as accessories and will be happy to assist you with your planning. Further accessories available, such as: Frame, corner, and impact protectors, push-through guards, chipboard, grating, back panel grating, and deep support beams. Shipping: Please request shipping costs, providing your postal code, location, and the desired quantity of items. Dwedpehbhavsfx Apteb Further service offerings: Planning, racking installation/disassembly, purchase/sale Changes and errors in technical data, specifications, and prices, as well as prior sale, are subject to change!

Condition: used, Size: 200x1280 mm 3 EUR/piece 100x1280 mm 1.5 EUR/piece If you require shelving or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used shelving, as well as accessories, and will be happy to assist you with your planning. Further accessories available, such as: Frame, corner, and impact protection, push-through guards, chipboard, grating, back panel grating, and deep shelf supports. Dwjdpfoik E Npox Apteb Shipping: Please request shipping costs, providing your postal code and location, as well as the desired quantity of items. Additional service offerings: Planning, shelving installation/disassembly, buying/selling Changes and errors in technical data, specifications, and prices, as well as sales pending, are subject to change!

Condition: excellent (used), Note: The pictures serve to clarify the material. - The workbench frames are commissioned unassembled; - The production time is usually approx. 3 - 5 working days. Basic dimensions: Width: approx. 5,950 mm Height: approx. 940 mm Depth: approx. 850 mm The scope of delivery includes: 04x square tube, used Material color: sendzimir galvanized Dodpfx Astk Ikmoptjwb Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 5,650 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x chipboard, used Chipboard thickness: 38 mm Chipboard width: approx. 5,950 mm Depth of chipboard: approx. 850 mm Surface: possibly coated (possibly two-piece) 08x Mounting bracket, new Finish: sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm Self-drilling screws, new Finish: galvanized Dimensions: 6.3 x 70 mm 32x screws: M12 32x nuts: M12 32x washers: M12 Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: new, Storage platform 8,000 x 5,000 mm, load capacity 500 kg / m² Dimensions / technical data Dimensions of steel structure: 8,000 x 5,000 mm Dimensions of floor area: 8,000 x 5,000 mm Floor area: approx. 40 m² Height to top of floor covering: up to 3,500 mm (freely selectable) Djdpfxed Htr Hs Aptowb Clear height from underside: top minus 338 mm Net load capacity: 500 kg / m² evenly distributed load Included in the scope of delivery: 6 steel tube supports 100 x 100 x 3 mm 4 main beams C+300 x 3 x 3,990 mm (perforated) 9 cross beams S+300 x 2 x 4,800 mm (closed) 18 mounting angles 3 diagonal braces 18 chipboard panels P6, 3000 x 850 x 38 mm, underside white, top natural including fastening material including load signs Supports available in the following standard colors: RAL 7035, light gray RAL 7016, anthracite gray RAL 3000, fire red RAL 5003, sapphire blue (Other colors available upon request!) Main and cross beams galvanized We also manufacture the storage platforms to any other desired size. Prices on request! Accessories, such as stairs, railings, etc., are not included in the scope of delivery. These can be supplied for an additional charge. (Prices on request) Our services at a glance: (Prices on request) Assembly, installation our general assembly conditions apply Shelf inspection Shelf inspection according to DIN EN 15635, performed in accordance with the requirements of BGR 234 visual inspection for all shelving systems Delivery with our own fleet (without unloading)