Used Circular Saw Bench for sale (9,443)

Condition: used, Year of construction: 1988, saw blade diameter 0400 mm cutting diameter 140 mm cutting length 140 mm mitre joint cuts -/+ degrees +/-45° cutting capacity - square 130 x 130 mm cutting speed 5 - 30 m/min type of control konvent. voltage 380 V connected load 6 kW weight of the machine ca. 1,5 t Fedpoxu Nriofx Addjgk dimensions of the machine ca. 1,5 x 1,5 x 1,5 m Machine has angle cutting arrangement +/- 45°, is semi automatic without material infeed.

Condition: as good as new (ex-display), Year of construction: 2024, Automatische langssnijzaag Raimann FlexiRip “Jrionline” Zaag lengte : 6200 mm Fjdpfx Asu Sg Ansddsgk Maximale zaaghoogte afhankelijk van de diameter van het zaagblad, variërend van 85 tot 210 mm. Alleen gebruikt als demo, praktisch als nieuw, met slechts 34 draaiuren.

Condition: used, Year of construction: 1993, functionality: fully functional, Panel saw, spindle moulder, combination machine, table saw, circular saw, carpenter’s saw, panel dividing saw, table router, tilting spindle moulder FELDER Model: KFS37 FL Year: 1993 Sliding table length: 245 cm Manual height adjustment of the saw blade Manual tilting of the saw blade up to 45° Rip fence with fine adjustment, up to approx. 75 cm Outrigger table with extendable crosscut fence Mitre fence Main motor power: 3 kW Tilting spindle moulder Manual height adjustment of the tilting spindle Manual tilting of the moulder spindle up to 45° to the rear Fgjdpfx Adjxycy Rsdek Spindle diameter: 30 mm 3 spindle speeds, adjustable via belt Spindle can be lowered below table level and removed Spindle moulder motor power: 3 kW Cutter fence with fine adjustment and parallel guidance—Felder multi-adjustment system Fold-away support for power feeder Eccentric workpiece clamp Prior inspection is expressly recommended; please leave your telephone number by email and I will contact you to arrange a viewing appointment. Subject to prior sale. All information provided without guarantee. Machines can be collected in person or shipped by freight at the buyer’s expense. Loading and packaging can be organised by us. The quoted shipping costs are indicative; actual costs may vary depending on location and unloading facilities, please enquire. The item is offered under differential taxation. The displayed sales price is the gross final price. An invoice showing VAT separately will not be issued. Basis of warranty: Due to age and wear, sale is exclusively to commercial buyers with no warranty, guarantee, or return the claim. All information is without guarantee. By placing a bid, the buyer acknowledges this. For used items, warranty is 12 months if the buyer is a consumer within the meaning of §13 BGB. If the buyer is an entrepreneur within the meaning of §14 BGB, all warranties are excluded. For new items, warranty is 24 months if the buyer is a consumer within the meaning of §13 BGB. If the buyer is an entrepreneur within the meaning of §14 BGB, the warranty is 12 months.

Condition: excellent (used), power: 4 kW (5.44 HP), Felder K 500 Professional – Professional Quality Panel Saw from Private First Ownership Manufacturer: Felder Group (Austria) Model: K 500 Professional Condition: Very good, from private use Operating hours: Max. approx. 10 hours Technical Specifications Motor power: 4 kW, 400 V three-phase Saw blade diameter: max. 315 mm Cutting height: up to 102 mm (at 90°) Cutting width with rip fence: 800 mm (full table width) Sliding table length: 2,050 mm Saw blade tilting: 0 – 45° Scoring unit: Pre-fitted / optional electric Ø 120 mm Working height: approx. 890 mm Extraction ports: Ø 120 mm (housing) + Ø 80 mm (saw blade guard) Weight: approx. 420 kg Dimensions: approx. 2,050 × 2,800 × 1,300 mm (with outrigger) ⚙️ Features & Highlights +Precise X-Roll sliding table – maintenance-free +Sturdy rip fence with fine adjustment +Robust cast saw unit for low-vibration operation +High-quality Felder construction – made in Austria +Very clean, well-maintained machine – nearly as new +Includes various tools and accessories Delivery & Condition +Machine is fully functional and ready for immediate use +Collection preferred; transport possible by arrangement +Inspection by appointment Fedpfx Adoxn Rvpodsgk Summary: Solid, precise, and durable panel saw from a private owner – ideal for joiners, ambitious hobby woodworkers, or small workshops. VAT margin scheme applied.

Condition: good (used), Year of construction: 2010, saw blade diameter: 250 mm, overall weight: 130 kg, input voltage: 380 V, coolant pump power: 100 W, Huvema HU250 DV cold circular saw for sale Manufacturer: Huvema Type: HU 250 DV Year of manufacture: 2010 Voltage: 400 V 50 Hz Mounted on a tripod, rotating head, quick clamp. 2-speed motor Liquid cooling with pump Fgsdpfx Adjtwdvijdek Dimensions of the saw blade: 250 x 32 mm Cutting capacity 45° straight: 50 x 60 mm Cutting capacity in a 45° circle: 65 mm Cutting capacity 45° square: 55 mm Cutting capacity 90° straight: 55 x 95 mm Cutting capacity in a 90° circle: 70 mm Cutting capacity 90° square: 70 mm Dimensions: Height: 150 cm Width: 60 cm Length: 90 cm Weight: approx. 150 kg

Condition: good (used), Year of construction: 1996, Distance between saws at 90°max : 4000 mm Cutting height at 90° : 200 mm Cutting with: 130 mm Fodpfx Asgixvweddsgk Power: 5,1 kW Weigth: 1260 kg

Condition: good (used), Year of construction: 2005, functionality: fully functional, Description see above Fgedpfexwcxhsx Addok

Condition: new, CPM/400 Prism Machine is specially designed to cut logs between 150-400 mm in diameter and 1.2-6m in length with the help of a circular saw. It is used to cut logs vertically to length with circular saws driven by independent electric motors on four separate shafts in the machine. Fgsdpem H Uz Aofx Addek Machine; It consists of 3 modules: input module, cutting module and output module. Right and left saws can be positioned in millimeters according to the diameter of the log. As an option, right and left saws can be automatically positioned according to the diameter of the log. CPM/400 Prism Machine, which can cut at high speed and efficiency, is suitable for cutting logs of various lengths (1.2-6 m) according to customer demand, and is preferred in wooden pallets, construction timber and joinery timber production workshops.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Straight cut, range 105 x 105 mm, round = 120 mm Motor: 1.7 / 2.2 kW Fgjdpsxxbnwjfx Addsk Saw blade size: 350 mm Saw blade speed: 1400 / 2800 rpm Pneumatic tensioning.

Condition: good (used), Year of construction: 2015, functionality: fully functional, saw blade diameter: 600 mm, cutting range round steel at 90°: 220 mm, For sale: 1 used CNC fully automatic aluminum circular saw incl. suction unit Manufacturer: Tronzadoras MG Model: GAA-600 - CNC YEAR OF MANUFACTURE: 2015 TECHNICAL DATA - Cutting range round: 220mm, box: 300 x 90mm, square: 175mm - Drive power 4.1 KW / 400 V / 50 Hz - Speed 3000 rpm. - Cutting speed 55 m/sec. - Blade dimensions 600 x 50 mm - max. cutting height 220 mm - Dimension 2020 x 1510 x 975 mm - Weight 650 kg Fgjdpfxouyyhae Addek Machine comes incl. 6m infeed roller conveyor and the appropriate extraction system. The saw can be inspected in our warehouse in 09599 Freiberg.

Condition: new, Year of construction: 2025, cutting length (max.): 3,200 mm, CIRCULAR SAW model SICAR SEGA 350 NEW machine in PROMPT DELIVERY SUPER DISCOUNTED PRICE with scoring unit digital tilt angle reader 0° / 45° bridge saw blade guard CE regulations : YES with Instruction Manual and CE declaration volts.380/50 up / down and tiltable 45° of blades are manual digital tilt angle reader 0° / 45° Fodpfx Adoq Au U Hsdogk carriage mm. 3200 indipendent motors main motor power Hp 7,5 scoring unit motor power Hp 1 max. diam. blade mm. 350 diam. of scoring unit mm.120 max. cutting hegiht at 45° mm. 92 max. cutting height at 90° mm. 120 max. cutting width at parallel guide mm.1250 bridge saw blade guard volt. 380/50

Condition: used, Technical details: Saw blade diameter: 400 mm cutting diameter: 140 mm hole of sawblade: 50 mm saw blade rpm: 6 / 12 / 24 / 48 U/min cutting range 90 degrees: round: Ø 140 mm cutting range 90 degrees: square: 130 x 130 mm cutting range 90 degrees: flat: 370 x 30 / 315 x 70 / 265 x 95 mm Table dimensions: Ø 700 mm table rotating: 360 Grad clamping capacity: 8 - 30 bar electrics - voltage/frequency: 400 / 50 V/Hz air-pressure connection: 6 - 8 bar total power requirement: 3,6 kW weight of the machine approx.: 1170 kg dimensions of machine: T: 1,5 x B: 1,0 x H: 2,35 m Fodpfxeu Niuze Addsgk SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE Profile circular saw with two-hand control (underfloor saw) for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Mitre cut 30° to 90° Operation Control panel and two-hand operation Material clamping (opening width) adjustable with return stroke Saw blade feed speed adjustable Without coolant system *

Condition: used, Year of construction: 1991, - Grooving saw unit: controlled (on and off) Fgodpfsb Scc Dsx Addsk - Main saw unit - Note: This machine has been specially built for grooving and ripping drawer fronts. In general, panels can be grooved or split.

Condition: used, Year of construction: 2021, saw blade diameter: 800 mm, rotational speed (min.): 1,450 rpm, power: 5.5 kW (7.48 HP), Crosscut saw AS Very good, well-maintained condition Saw blade diameter 800mm. Sturdy tubular steel base frame. Fodpfsd Szf Nox Addogk Powerful saw motors. Pneumatic material clamps (3 vertical). 2-hand safety operation. Coolant device. Protective hood. Optionally with length measuring system or automatic positioning system. Version as automatic saw-drilling machine or automatic saw-punching machine on request.

Condition: good (used), Year of construction: 2015, saw blade diameter: 400 mm, - Underfloor circular saw BOMAR AL 400 - Saw blade 400 x 30 x 3.6 mm - Power 3.2 kW - Weight approx. 400 kg - Pneumatic clamping cylinders, horizontal and vertical Fodpsxwqlvofx Addogk - Mitre adjustment possible on both sides

Condition: used, Year of construction: 2001, volt 400 V weight Stück 490 kg 2 miter ja 175 mm Rund Fodpfx Aeu T Sfbeddjgk

Condition: new, saw blade diameter: 400 mm, - Saw blade 400 mm - Double miter - 4 pneumatic clamps - Mist lubrication system - Blow gun - Protective cap - documentation - 400V Fgsdpfx Asu Si Ndjddok

Condition: used, Technical details: saw blade diameter: 250 mm grinding wheel hole diameter: Ø 25 feed - manual: per Hand mm Cutting height: max. 70 mm current: 8,5A / 50Hz / 220V A/Hz/V table-size: L:520 x B:500 mm dimension machine xH: 0,6 x 0,6 x 0,9 m Sale at sales price as spare parts dispenser, non-functional no UVV conformity (accident prevention regulations) Fodpfx Adou Nif Todsgk *

Condition: good (used), Year of construction: 1999, saw blade diameter 450 mm cutting diameter 150 mm Fedpfx Aoxqrdmeddogk saw blade diameter möglich: 400 + 370 mm Saw blade 50 mm saw blade feed stepless ca. 0 - 1000 mm/min rapid return speed 3300 mm/min table rotating + / - 90 Grad cutting speed 7 - 43 m/min total power requirement 4 kW weight of the machine ca. 1050 kg Overall size 1020 x 1350 x 2000 mm Semi-automatic cold circular saw, made by Kaltenbach, type KKS450H, with Siemens S7 PLC control for cutting speed and sawing height, feed roller conveyor, discharge roller conveyors with hand crank, remote control and digital display. Machine dealer with own stock of 1600 m².

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, saw blade diameter: 200 mm, Fully automatic metal circular saw for burr-free cuts and high sawing performance in thin-walled material Manufacturer: Rohbi Series: RKA-86 Control system: Siemens Year of manufacture: 2007 Origin: Switzerland technical data: ----- - High-speed spindle for saw blade 500 - 3,900 rpm (2.0 kW) - Clamping cylinder pneum. 2.000 N - Cutting range round solid material with HSS saw blade: 2-60 mm - Cutting range profiles solid material with HSS saw blade: 60x40 mm - Cutting range round pipe material with HSS saw blade: 2-70 mm - Cutting range profile material with HSS saw blade: 80x40 mm - Material feed carriage max. stroke: 1,250 mm Drive via gear wheel / gear rack - Clamping vice clamping: hydraulic - Minimum quantity lubrication - Saw blade dimensions: 100 - 200 mm (HSS or solid carbide) - Saw blade monitoring via load pick-up - Chip removal via external extraction possible - Material removal via retracting chute - Weight: 900 kg Accessories: ----- - Operating instructions Fjdstxlxujpfx Addjgk - 3x sets of clamping jaws with drawings

Condition: new, Carbide saw blade ø 800 mm Bore ø 30 mm / 90 teeth Fsdpfx Aeu H T Hvjddsgk

Condition: used, Year of construction: 2001, saw blade diameter 400 mm miter . Kühlung weight of the machine ca. 1 t number 4 Stück +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Fgsdpfx Adjlug Tujdjk Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Technical details: Saw blade diameter: 350 mm cutting range 90 degrees: round: 110 mm cutting range 90 degrees: square: 85 x 85 mm cutting range 90 degrees: flat: 180 x 85 mm cutting range 45 degrees: round: links/rechts: 105 / 110 mm cutting range 45 degrees: square: links/rechts: 85 x 85 / 85x85 mm cutting range 45 degrees: flat: links/rechts: 130x85 / 130x85 mm hole of sawblade: 40 mm range of revolutions per minute - continous: 9 / 18 / 36 / 74 / 4step U/min rotary table: Ø 400 mm/min table swivelabel +/-: 60° rechts und 45° links ° air-pressure connection: 7 bar total power requirement: ca. 2,2 kW weight of the machine approx.: 430 kg dimensions of machine: B: 0,7 x T: 1,01 x H: 2,1 m The circular saw is an electro-hydro-pneumatic semi-automatic circular saw with which miter cuts of up to 45° inwards or 60° to the right can be made on profiles and solid materials. Fedpfx Adju Nilyedsgk Vertival circular saw Solid, heavy cast construction max. opening of the vice 180mm cutting counter vertical travel of the saw head: 200mm Vice opening width max. 180mm (jaw size W:220 x H:70mm) Operation via control panel *

Condition: used, Year of construction: 1979, cutting diameter 440 mm weight of the machine ca. 780 kg Fgsdpfx Adsf Dwa Usdok +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1980, saw blade diameter 380 mm pneumatic clamping ja 46893 weight of the machine ca. 1,3 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Fgsdpjd N Sm Defx Addjk Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++