Used Cloos Glc 403 Pa Ts for sale (49)

Condition: used, MIG MAG welding machine, gas-shielded welding unit CLOOS, type GLC 403 PA-TS Manufacturer's No. 8198, Year of manufacture 1994 Rated power 400 amps Power 400 amps - 60% duty cycle 310 amps - 100% duty cycle Adjustment range: stepless Connection hose package: 4.5 meters Podpfx Ajzugnzophegr Mains connection: 380 volts, 50 Hz, 32 amp plug - 2-cycle and 4-cycle welding unit - External wire feeder, type CK 72/5TSZK with 2-roller drive and 4.5-meter hose package - 4-meter hose package with central connection and EHRIG hand torch, type Senator-800-D - Water-cooled - Pressure gauge for gas cylinder - Welding unit equipped with 1 mm welding wire Space requirement L x W x H: 1250 x 600 x 1100 mm Weight: 300 kg Good condition

Condition: used, Year of construction: 1994, Technical details: welding current - continuous: 40...400 A Length: 900 mm height: 1200 mm total power requirement: 13,8 kVA weight of the machine approx.: ca. 180 kg space requirements of the machine approx.: B:0,6xL:0,9xH:1,2 m MIG MAG Welding device -welding transformator as spare part donor Psdpfx Asu Nwx Uophsgr - capacity 40A/15V up to 400A/34V - open circuit voltage -58V - characteristic constant - protection type IP23 - isolation type F - water cooled Circuit board A5 missing! *

Condition: excellent (used), Year of construction: 2012, CLOOS GLC 403 Quinto welding machine. A total of nine Cloos 403 machines are available. Year of manufacture: from 2005 to 2012. Pgodpfxotkunuo Aphjr Other models of the Cloos 503 welding machines are in stock

Condition: excellent (used), Year of construction: 2022, operating hours: 3,600 h, functionality: fully functional, Description: Like-new welding cell including bolt-setting equipment with only 3600 operating hours, consisting of: Robot Qirox QRC 350, QC2 control system including connection cable, programming handheld device, gas nozzle sensor, arc welding search, point editor, QWP, QTI, Manax, hard drive, center-based circular programming Base stand Welding machine Qineo Next 452 Motion, wire feeder, welding torch, torch testing gauge, hose package, mechanical cleaning, 1 light curtain, start pre-selection, safety grid in the insertion area, service door with limit switch protection 1 manipulator QR-WP-TC 2.5 KN for components up to Ø 800 mm, plate distance 2000 mm and a load capacity of 250 kg. 1 extraction hood including hose lines without filter unit Pgodpfszvm Anex Aphor 1 Bolte bolt-setting device complete Automatic changeover system between bolt-setting head and welding torch Documentation, manufacturer's declaration Accessories: Functional guarantee. Services available upon request. Delivery date: possible in the short term. Subject to prior sale. The system can be inspected under power near Siegen. Special price if dismantled by the end of September 2026!

Year of construction: 2007, condition: ready for operation (used), Four metalworking machines are offered. 1) Cloos GLC 255 MIG/MAG welding machine, year of manufacture: 2004, dimensions X/Y/Z: approx. 980mm/450mm/700mm, weight: approx. 115kg. 2) Cloos GLC 353 MC3 MIG/MAG pulsed welding machine, year of manufacture: 2007, weight: approx. 160kg. 3) hebö Type II bar twister, year of manufacture: 1979. 4) Eisele VMS II PV-p circular saw, year of manufacture: 1974, weight: approx. 290kg. Inspection by prior arrangement is possible. Pjdpfxezp Rhhj Aphegr

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, Welding robot Qirox QRC 320 incl. V7 control system and programming handheld device with cable, connection cable robot control cabinet, tactile sensor, arc welding search, point editor Cloos welding machine Qineo Puls 600, wire feeder, welding torch, torch hose package, mechanical cleaning, torch testing gauge OPTION: Motion weld equipment and Qineo Next 452 1 cell base frame incl. partition walls 1 two-station indexing table incl. 2 rotating-swiveling manipulators Load capacity 250 kg/station, rotation radius 500 mm 1 light barrier, 1 start box, arc protection on the indexing table, 1 service door with end-of-travel limit switch, Pgedpfxozrpf Dj Apher connection control integrated Documentation, manufacturer's declaration Delivery date: possible within 8 weeks. Subject to prior sale.

Condition: excellent (used), Year of construction: 2003, Cloos GLC 451 C welding machine. Year of construction: 2003 With welding package Pgsdpfxetkuris Aphor

Condition: excellent (used), Year of construction: 2004, Carl Cloos GLC 503 Quinto SD welding machine. A total of 4 units available. Year of manufacture: 2004-2004-1999. Price refers to 1 unit. Psdetkuk Rspfx Aphegr

Condition: good (used), Heat exchanger for inert gas welding machine, inert gas device, cooler Pjdpfxswubqte Aphogr -Manufacturer: CLOOS, heat exchanger from inert gas welding machine GLC 353 MC3 -Blower: ebm papst type M4Q0465-DA01-S8 -Dimensions: 330/160/H330 mm -Weight: 4.2 kg

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, A robot-assisted CLOOS welding system is offered. 1) CLOOS robotic welding system, wire feed speed: 30m/min, steel wire spool weight: 15kg, aluminum wire spool weight: 4kg, welding power source dimensions X/Y/Z: 1245mm/470mm/930mm, welding power source weight: approx. 190kg, wire feeder dimensions: 680mm/410mm/235mm, wire feeder weight: approx. 24kg. 2) CLOOS ROMAT 310 welding robot, payload: approx. 10kg, max. reach: approx. 1540mm, max. workpiece weight: approx. 3500kg, control system: CLOOS ROTROL II-D. 3) CLOOS WPV-DP-10000 N workpiece positioner, quantity: 2. 4) CLOOS GLC 503 Quinto welding power sources, quantity: 2. 5) CLOOS main electrical cabinet. 6) Welding fume extraction system. Including safety fence and peripheral equipment. Inspection possible by prior arrangement. Pgodpfxjzli Aco Aphor

Condition: used, Year of construction: 2012, functionality: fully functional, input voltage: 400 V, type of cooling: water, workpiece weight (max.): 500 kg, Cloos robot with Qineo Pulse MIG/MAG welding power source 6-axis industrial robot Arc sensor / Tactile sensor Automatic torch cleaning Pgsdpfx Apezty D Hjher 2-station operation Shows signs of wear, but is fully functional The system has already been disassembled and palletized. Installation and commissioning can also be offered.

Condition: used, MIG MAG welding machine, gas-shielded welding unit, CLOOS type GLC 357 N MIG MAG welding power source Manufacturer's number: 576, Year of manufacture: approx. 1985 Rated power: 350 Amps Power: 350 Amps - 80% duty cycle 310 Amps - 100% duty cycle Adjustment range: stepless Connecting hose package: 4.5 meters Mains connection: 380 Volts, 50 Hz, 32 Amp plug - 2-cycle and 4-cycle welding system - external wire feeder, type CK 72 ZK, with 2-roller drive and 4.5-meter hose package Psdpfxehubg Te Aphegr - 3-meter hose package with central connection and CLOOS hand torch - water-cooled - pressure gauge for gas cylinder - welding machine equipped with 1 mm welding wire Space requirement L x W x H: 1250 x 600 x 1100 mm Weight: 260 kg Device tested - function is working properly.

Condition: used, Year of construction: 2016, operating hours: 43,000 h, functionality: fully functional, System consisting of: 1 welding robot Qirox QRC 350-E incl. V7 Adv. controller, programming handheld device with 15 m cable, 24 V buffer, 2 GB flash drive, external cooling unit. Software expansion: Gas nozzle sensor, arc seam tracking, point editor, transformation, parameter interlocking, multi-layer technique, Manax Offline laser ICSE LD Welding equipment: Qineo Puls 600 (600A) with Premium control module, wire feeder, burner hose package, welding torch MRW 510 evo, Duo drive CDD 2, torch test gauge individual as well as with CDD, mechanical cleaning with wire cutter, external cleaning, pressure booster, wire spool equipment. Elevated track 20 kN, travel path 10 m, 2 track supports. Pgjdpezmyfwofx Aphjr 2 L manipulators WPS-TS 7.5 kN, rotation radius 1100 mm, load capacity 750 kg. 2 adjustable counter bearings, travel distance 3 m, manual. Connection control, 2 start pre-selection, partition walls and 2 sliding gates incl. end switch protection. 1 filter unit Tecau 6000 m³ extraction capacity, 1 extraction hood 3x2.5 m with curtains, suction slit channel. Documentation, CE declaration. The system was dismantled in June, inspected before dismantling, and regularly maintained by Cloos.

Condition: used, Year of construction: 2002, Cloos – Robotic welding system with 2 robots and a swivel positioner for MIG welding with a TEKA smoke extraction system. Robot type: ROMAT 310 Number of axes: 6 Payload: 10 kg Repeatability: ± 0.1 mm Working range (spherical): approx. Ø 4100 mm Control system: ROTROL II (one programming handheld device is defective) Mechanical torch cleaning: CMR Welding power source: GLC 353 Quinto Profi Wire feed unit: CK 78 A/R Wire feed system: DUO – DRIVE Connecting hose package: 3.5 m Welding torch: MRW 3802 Welding torch holder: with integrated collision protection Two-station workpiece positioner: HWR-3KDP 5.000 Load on the rotary table, one-sided: 5000 N Load on the rotary table, two-sided: 3000 N Torque for station change: 2900 Nm Torque for rotary table: 800 Nm Diameter of rotary table: 400 mm Clamping length: 4000 mm Max. speed of rotary table: 60° / sec Smoke extraction system: TEKA cartridge filter system / Type TK-ZPF-4-40-DP with extraction hood 2300 x 4800 mm Podpfxszrux Aj Aphegr Year of manufacture of the system: 2002 Certificates of conformity are available.

Year of construction: 2004, condition: ready for operation (used), A fully overhauled automatic welding station Cloos from the year 2025 is available. Robot type: Romat 320, welding power source: GLC 353 MC3 R, control system: Rotrol II fibre optic, welding process: MIG. Load capacity: 15kg, robot axes: 6, reach: 3200mm, repeatability: +/-0.1mm, power: 25kVA, total weight: approx. 600kg. Documentation available. An on-site inspection is possible. Pgodpoxyk Susfx Aphsr

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, For sale is a Cloos Romat 350, including a Cloos workpiece positioning system, model WPEK-DP-KP-10 kN -HD. - Electrical power of the ROMAT 350 = 22.5 kVA - Model series = ROT. II - G Pgodpezwfmujfx Aphjr

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, System consisting of: 1 Welding robot Qirox QRC 350-E including control unit, programming handheld device, 24 V buffer, PC connection on the control cabinet side, 2 GB flash drive from a training system, in like-new condition, manufactured in 2023. Pgedpozu Shyofx Aphjr Gas nozzle sensor, arc welding seam tracking, multi-layer welding technique, point editor, oscillating patterns, transformation. Qineo Puls 600 with Premium control module, wire feeder, torch hose package, welding torch MRW 510 evo, torch testing gauge, mechanical cleaning, pressure booster. Like-new floor track with a capacity of 20 kN, travel distance 12 m, robot is mounted on a C-shaped stand in a hanging position, manufactured in 2019, 135 operating hours. 2 Rotary positioning device with counter bearing TC 5 kN (no operating hours), load capacity 1000 kg, clamping length 5.0 m. Connection control, 4 light barriers, 2 start pre-selection. Delivery date: upon agreement. The components are in stock and need to be assembled and tested. Warranty: 6 months.

Condition: excellent (used), Year of construction: 2020, CLOOS QIROX Robotic Welding Line – Dual Gantry System – 2020 General Description For sale: high-performance robotic welding line based on the renowned CLOOS QIROX system, designed for automated welding of medium to large steel structures. The system consists of two gantry-mounted welding robots working on a shared linear axis, combined with rotary positioners, allowing efficient welding of long components and complex assemblies. This is a modern (2020), industrial-grade solution suitable for heavy fabrication, steel structures, frames, and serial production. Key Equipment & Configuration Robots • Model: CLOOS QIROX QRC 410 • Year: 2020 • Type: 6-axis articulated robot • Payload: 10 kg (wrist capacity) • Repeatability: ±0.1 mm • Working range: approx. Ø 5000 mm • Welding processes: MIG/MAG, TIG, optional cutting & sensor integration ✔ High dynamics and precision ✔ Modular design for flexible applications ✔ Suitable for complex welding paths and long seams Controllers • Model: QIROX Controller QC2.02 / QRC 410 • Industrial PC-based control system • Simultaneous control of robot + external axes • Power supply: 3x 400V / 32A 3x 400V / 19A • Frequency: 50/60 Hz • Power: up to 21.5 kVA ✔ Robust cabinet design ✔ Optimized human-machine interface ✔ High path accuracy and process stability Positioners (Rotary Tables) Psdpfx Apoyvaahshogr • Model: CLOOS QR-CTU-100-09 2.0 • Load capacity: 10,000 N (≈1,000 kg) – vertical position 20,000 N (≈2,000 kg) – horizontal position • Torque: up to 1600 Nm • Tilting moment: 8800 Nm • Drive power: 4.5 kW ✔ Programmable axes synchronized with robot ✔ Ideal for complex geometries ✔ Enables optimal welding position and accessibility System Layout • Dual gantry system (2 robots on linear track) • Long working area for large structures • Integrated working tables for long parts • Suitable for: – frames – steel constructions – long welded assemblies Typical advantages of this configuration: • Extended working range via linear axis • Possibility of simultaneous welding operations • High productivity and reduced cycle time Advantages ✔ High productivity and repeatability ✔ Excellent weld quality ✔ Flexible configuration (different parts & sizes) ✔ Proven CLOOS industrial reliability ✔ Suitable for serial and custom production Typical Applications • Steel structures • Machine frames • Automotive components • Construction elements • Heavy fabrication Technical Highlights (Summary) • Robots: 2x QIROX QRC 410 • Axes: 6-axis robots + external axes • Control: QIROX QC2.02 • Positioners: up to 2,000 kg capacity • Power: 400V / 50–60 Hz • Year: 2020 • System type: gantry welding line Condition & Availability • Condition: Very good, fully operational • Available for inspection under power • Can be dismantled and shipped worldwide

Condition: good (used), MIG/MAG welding machine, MIG/MAG welding machine -Max. welding current: 320 A -2-roller drive -Air-cooled Pgedpfob A Hhvex Aphjr -incl. ground cable -with removable wire feeder -Gas valve -Hose package -Dimensions: 1000/500/H970 mm -Weight: 170 kg

Condition: ready for operation (used), Year of construction: 2009, number of axes: 8, Welding robot manufactured in 2009. This CLOOS Romat 320 features an integrated 2-axis workpiece positioner with a vertical rotary turntable plate and an L-shaped tilt axis. It includes a full safety perimeter booth with optical safety light curtains and a dual pendant remote control box for station control. If you are looking to get high-quality welding capabilities, consider the CLOOS Romat 320 machine we have for sale. Contact us for further details. - Load Capacity: 15 kg- Own Weight: 205 kg- Controller Unit Model: ROTROL® II- Interface / Input System: Integrated control cabinet panel with compact teach pendant (handheld programmer), full physical QWERTY keyboard drawer, and display unit.- Component/Workpiece Positioner: Integrated 2-axis Cloos workpiece positioner with vertical rotary turntable plate mounted on an L-shaped tilt axis.- Cell Enclosure: Full safety perimeter booth with blue/orange panel walls, integrated sliding or swing doors, and optical safety light curtains on the loading station perimeter.- Manual Operating Panel: Dual pendant remote control box with emergency stop and multi-button configuration for station control. Podjzg H E Dopfx Aphegr

Condition: used, Year of construction: 2002, Equipment: documentation/manual, Technical data in the attachment. Robot including workpiece positioner and welding technology. Pedpfx Apoy Emz Sehjgr

Condition: refurbished (used), Large spare parts warehouse: Cloos spare parts for controllers 32 TM, V3 to V7 Used but refurbished servo motors with warranty Programming handheld devices Power supplies Drive motors for robots and positioning devices Psdpfx Aed H T I Eophogr Quinto II 403, 603, MC 3 welding machines Robot mechanics Romat 320, 350, Qirox 1 and 2

Condition: new, Year of construction: 2024, 1 cloos welding robot qirox 350 incl. control unit, teach pendant incl. cable Connection cable between control unit and robot 5 m Gasnozzle sensing, seam tracking, point editor Pedastal for robot Cloos welding machine next 452 ( 450 A pulsed arc machine), wire drive, torch, torch hose package, torch jig, connection hose package 5 m, mech. torch cleaning 2 stations turning table incl. 2 turning tilting devices WP TS-50 load capacity/station 500 kg, swing radius 800 mm 1 light beam, 1 start stop box, 1 safety wall on turning table 2 safety switches for swing doors Base frame between robot and workpiecemanipulator Psdpfx Aedkcrgophsgr delivery time: 12-14 weeks. Subject to prior sale.

Condition: used, Year of construction: 2007, operating hours: 42,000 h, functionality: fully functional, 2 identical systems consisting of: 1 cloos welding robot romat 350 incl. control unit, teach pendant incl. cable Connection cable between control unit and robot Gasnozzle sensing, seam tracking, point editor, CTMS, Manax C bow construction for robot in a fixed position Cloos welding machine MC 3 353 ( 350 A pulsed arc machine), wire drive, torch, torch hose package, torch jig, connection hose package 5 m, mech. torch cleaning Podsw R T Twjpfx Aphogr 2 stations turning table incl. 2 turning-tilting tables 5000 N load capacity/station 500 kg, swing radius 700 mm 1 light beam, 1 start stop box, 1 safety wall on turning table 2 safety switches for swing doors Base frame between robot and workpiecemanipulator delivery time: on request . Subject to prior sale. Both systems together will be offered for a special price !!

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 910718, 1 Cloos workpiece positioning unit, swivel and rotary device, with a protective screen in the center of the table. 2x2m distance between centers, center height 1300mm, 180° swivel unit type GR502, motorized. Two rotary devices with opposing supports are mounted on the platform of the rotary table. The drive side of the rotary device is designed as in type WPV-DP-5000 N. Load capacity per rotary device approx. 500kg. Was mounted on a Cloos welding robot ROMAT 76 S with Rotrol control, manufactured in 1990. Pjdpfx Aozkvarophegr No exchange, return, or warranty possible.