Used Cnc Borer for sale (8,591)

Condition: used, Year of construction: 2011, pressure: 400bending length: 4050column width: 3400electric current: 37,5 KWweight approx.: 25.000messurements (LxWxH): 5750 x 2110 x 3440STOCK CLEARANCE – UNBELIEVABLE PRICE! CNC Press Brake – DURMA AD-S 40400 (4 m x 400 tons) Now available at a special price ex works Böheimkirchen: only EUR 60,000!(Original price approx. EUR 170,000) Technical Specifications:Manufacturer: DURMA Model: AD-S 40400 Year of manufacture: 2011 Bending length: 4,050 mm Pressing force: 400 tons Axes: Y1, Y2, X, R + CNC-controlled crowning Motor power: 37 kW Features & Equipment:CNC crowning system, motorized adjustment via control Itedpfx Aev Rtg Tsdwsb Upper tool: 1010/A/75°, segmented and gooseneck-style Die: Multi-V die Backgauge: CNC-controlled 2 front sheet supports on linear guides CE-certified laser safety system (Lasersafe) mounted on the upper beam Machine fully complies with CE standards Condition: Very good One-time offer – available immediately!Only 1 unit in stock – ready for fast delivery – no lead time!Take advantage of this rare opportunity to own a high-performance CNC press brake at a fraction of the original price.

Condition: good (used), Year of construction: 2007, operating hours: 88,040 h, functionality: fully functional, machine/vehicle number: 07400003691, turning diameter: 120 mm, spindle bore: 118 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,500 mm, total length: 5,500 mm, total width: 2,500 mm, overall weight: 11,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D POWERLINE, DMG GILDEMEISTER TWIN 102 CNC Turning and Milling Center - Recorded spindle hours: 43,558 Isdpfx Adoyaqgyjwstb - Spindle speed range: 3,200/5,000 rpm - Swing diameter: 270 mm - Spindle distance: 900 mm - X1 axis travel: 290 mm - Z1 axis travel: 650 mm - X2 axis travel: 180 mm - Z2 axis travel: 650 mm - Y1 axis travel: ±40 mm - Z3 axis travel: 670 mm - X3 axis travel: 175 mm - Max. bar diameter: 100/104 mm - Number of driven tools per tool turret: 12 - Including chip conveyor, with 2 tool turrets (each with 12 tool stations), main and counter spindles, as well as foot switches Attention, the machine has the following defects: - The B-axis is defective (mounted on turret 1) - Guideways and drives show age-related wear - X2 axis (guide rails) runs slightly out of alignment by approximately 0.03 mm (should be re-measured) - Occasionally, axis reference value setting in the control system fails - The hydraulic pump was replaced after a failure and is now installed externally as a standalone unit FCA D-58256 Ennepetal, loaded on truck at a mutually agreed date at the end of February 2026.

Condition: good (used), Year of construction: 2008, operating hours: 72,899 h, functionality: fully functional, machine/vehicle number: 07510001241, turning length: 1,185 mm, turning diameter: 640 mm, spindle speed (max.): 12,000 rpm, workpiece weight (max.): 150 kg, total height: 3,040 mm, total length: 7,800 mm, total width: 4,100 mm, overall weight: 16,500 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, DMG GILDEMEISTER GMX 250 LINEAR CNC Turning and Milling Center - Recorded spindle hours: 39,361 - Swing diameter: 640 mm - Counter spindle turning diameter: 400 mm - Spindle distance: 1,500 mm - X1 axis travel: 550 mm - Y1 axis travel: 180 mm - Z1 axis travel: 1,185 mm - B1 axis travel: 240° - X2 axis travel: 180 mm Isdpfxoyaqczs Adwotb - Z2 axis travel: 1,050 mm - Z3 axis travel: 1,150 mm - Spindle speed range: 3,200/4,000 rpm - Rapid traverse rate, Slide 1 (X/Y/Z): 40/24/70 m/min - Rapid traverse rate, Slide 2 (X/Z): 24/36 m/min - Rapid traverse rate, Slide 3 (Z): 36 m/min - Tool holder: HSK 63 - Spindle speed: 12,000 rpm - Number of tool stations in chain magazine: 40 stations - Incl. tool holders mounted on the turret - Incl. bar loader, manufacturer: COCCHE GIOVANNI, type: CNC-DB 110, year of manufacture: 2008, serial number: CNCDB-08.306, weight: 1,500 kg Note: The machine has the following defects: - The hydraulic unit is faulty – it needs to be repaired - The Q2 axis (milling spindle tool changer) fails frequently - X2 axis (guideways) moves slightly askew - The linear guides and drives show wear commensurate with age Attention: A vehicle with 3,000 mm transport width is required for transport! FCA D-58256 Ennepetal, loaded onto truck at a mutually agreed date at the end of February 2026.

Condition: used, Year of construction: 2006, No. 3195 CNC machining center BIESSE Rover C 6.50 CONF.2 Used, year of construction 2006 Machine already disassembled According to our customer, the machine is fully functional Various workpieces can be processed simultaneously on the machine Working area X 4850/4600 mm Working area Y 1535 mm Power output 228 kW, 39 A Required floor space approx. 8100 x 6500 mm LB Total weight approx. 6800 kg Sale on behalf of customer, ex location Poland, without dismantling, without transportation and assembly Errors in description and price excepted Dismantling, loading and transportation by us optionally possible To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location Ijdpovn R A Hjfx Adwjtb

Condition: used, Year of construction: 2016, MORBIDELLI AUTHOR M400 MAIN FEATURES 5-AXIS MACHINING UNIT "PRISMA: QUALITY AND PRODUCTIVITY AT THE HIGHEST LEVEL XILOG MAESTRO SOFTWARE: EXTREMELY SIMPLE MATIC PROGRAMMING" WORKTABLE: ONE POSITIONING FOR MULTIPLE MACHINING OPERATIONS TECHNICAL DATA AUTHOR M400 AXES Working area X-axis (inside stop) mm 3,680 Working area Y-axis (max. loadable piece on rear stops) mm 1,680 Workpiece passage Z / number of Z axes mm 170 / 1 Workpiece length with pendulum machining mm 1,650 Travel speed X-Y axes Pro-Speed m/min 85 Z-axis speed m/min 30 INSTALLATION Installed power KVA 62÷82 Compressed air requirement NL/min 400 Extraction air requirement m³/h 4,430 Extraction air speed m/s 25 Extraction nozzle diameter mm 250 GENERAL CHARACTERISTICS CNC-controlled drilling and milling center in gantry design and work table with workpiece supports, for carrying out: - vertical drilling on the panel surface - horizontal drilling on all four sides of the workpiece - groove milling with disc milling cutters - general milling work 3-4-5 axes MACHINE STRUCTURE The basic structure is a monolithic construction made of thick-walled steel. It is stiffened by welded reinforcements across the entire machine bed, making it extremely stable. The table shape used, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow with a minimum of space requirements. The mobile gantry support is made of a solid monoblock. It is positioned in the X direction on prismatic ground guides via recirculating ball slides. On this mobile unit carrier, the work unit is mounted on prismatic, ground guides and recirculating ball slides. All axes are moved on large-section prism linear guides and recirculating ball bearings with a large contact surface, ensuring optimal gliding even at the highest speeds and accelerations. Precise and rapid positioning of the movable gantry (X-axis) is achieved by a pinion and rack with helical teeth. Large-section recirculating ball screws ensure precise positioning of the work unit along the movable gantry (Y and Z axes). MOTORS, DRIVES AND INVERTERS Perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors, designed to achieve speeds of up to 90 m/min while ensuring the best finishing quality. CONTROL The control unit consists of a numerical control for milling and drilling machines with "Xilog Maestro" graphical user interface based on the Windows 7 Office operating system. 17-inch LCD color screen. QWERTY keyboard. Tilting control panel. Machine interface with Xilog Maestro software. Xilog Maestro Features Programming Parametric graphic programming Import of DXF files (2D; SPLINE, POLYLINE 3D geometries), linear or circular interpolation in three axes, linear in space, spiral in the selected plane. Programming with graphic and syntax aids for drilling and milling operations Automatic optimization of drilling operations and tool change cycles Possibility of Plate zero point shift for drilling on inclined or curved plate sides Itjdpfxjxnldbj Adwjb

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable Itedpfxjhmmfko Adweb - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition

Condition: used, CNC cycle controlled lathe HARRISON type Alpha 400 Plus Machine No. P30180/150 Year of construction 1998 center distance 1250 mm turning diameter over bed 400 mm Iedpfxjh Hvk Aj Adwjtb center height 200 mm Swing diameter over cross slide 245 mm Swing diameter in the bend 585 mm bed width 313 mm face travel (X-axis) 250 mm Tailstock spindle diameter 73 mm Tailstock quill stroke 140 mm Tailstock quill mount MK 5 spindle bore 54 mm spindle head size Camlock D1 size 6 Spindle speed 20-2500 rpm. Spindle speed range (stage 1) 15-275 rpm. Spindle speed range (stage 2) 35-795 rpm. Spindle speed range (level 3) 110-2500 rpm. Feed rate X and Z 0.03 - 0.6 mm/rev. Rapid traverse speed X axis max. 2000 mm/min. Rapid traverse speed Z-axis max. 4000 mm/min. Threading function Metric / Inch / Diametral / Module Spindle drive power 7.5 KW Mains connection 400 Volt, 50 Hz, 23,5 kVA - cycle control Harrison Alpha / GE FANUC - language in French (France) - automatic gear range shifting in 3 steps (15-275, 35-795, 110-2500 rpm.) - electronic handwheels with different transmission ratios (1/10/100) - 3-jaw face spiral lathe chuck FORKARDT Ø 250 mm type CSN, 1 set of soft top jaws - quick-change tool holder MULTIFIX size B with 2 inserts - 1 piece of centering point running with the tool - 1 piece quick-action drill chuck RÖHM, 3-16 mm - hinged lathe chuck guard - hinged working area protection doors - chip tray with coolant device under the machine bed - Switch cabinet fixed to the machine - Interface RS 232 Space requirement L x W x H 2600 x 1450 x 1550 mm weight 1950 kg good condition

Condition: used, CNC Universal Coordinate Drilling and Milling Machine FEHLMANN type PICOMAX 100-CNC 3 CNC control HEIDENHAIN TNC 155 make no. 16186651 year of construction 1986 spindle holder FEHLMANN SF32 drilling capacity Ø 30 mm in steel threading up to M20 in steel travel X: 850 mm, Y: 435 mm pinol stroke Z: 210 mm Iedpfxjhik Ezs Adwetb vertical movement milling head 580 mm Feed X and Y 1 to 8000 mm/min. Feed Z 1 to 4000 mm/min. Rapid traverse X and Y 8 m/min. rapid traverse Z 4 m/min. Table clamping surface 1570 x 500 mm distance spindle nose - table 130 - 720 mm projection spindle - column 450 mm Spindle speed 50 - 7100 rpm. Stepless spindle drive 10 kW Total connected power 20 kW Mains connection 400 Volt, 50 Hz - CNC control HEIDENHAIN TNC 155 with TFT monitor - 3 axes controlled, X, Y and Z pinol adjustment - hydro-mechanical tool clamping FEHLMANN SF32 - thread cutting device - cable remote control for machine operation and axis movements - motorized vertical movement of the milling head with shut-off via adjustable cams - 3D probe RENISHAW, type MP 11F with holder Fehlmann SF32 - 20 tool holders FEHLMANN SF32 - swivelling tool holder with 21 tool places - Coolant device in the machine column - control cabinet fixed to the machine - Documentation Operating manual, control manual and E-circuit diagrams space requirement L x W x H 2350 x 2000 x 2300 mm weight 3,2 ton. very good condition

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Serial No. MK 285 Year of manufacture 1998 CNC Control SAFAN Software Version 5.07 TS1 Pressing force 500 kN (50 tons) Working length 2550 mm Stroke 215 mm Clearance between side frames 2700 mm Tool installation height max. 414 mm Table width 55 mm Table height above floor 950 mm Approach speed approx. 75 mm/s Return speed approx. 75 mm/s Working speed approx. 1.6 to 15 mm/s Motor power 9 kW Power supply 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN Software Version 5.07 TS1, Y1 and Y2 axis for press beam - 2-axis back gauge: X-axis (depth adjustment), R-axis (height adjustment) - 2 back gauge fingers, lateral manual adjustment (Z1, Z2) - Press beam driven by 2 servomotors and belt drive - Infinitely variable working speed - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for upper tool UKB system, Type 50.571 (UKB System A) Itedpfx Aoxpqy Dedweb - Tool mount for lower tool: 55 mm wide with 13 mm slot, slot depth 21 mm (Trumpf system or UKB System B) - Without press brake tools (new tool set from UKB costs approx. EUR 3,600 net) - Total recorded operating hours = 8,120 h - Work strokes 1,049,789 Space requirement (L x W x H): 3450 x 1850 x 2650 mm Weight 5,000 kg Good condition

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Frame depth: 420 mm Distance between side frames: 1660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm Itsdpjw Iq Ugsfx Adwob - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition

Condition: new, Year of construction: 2026, rotational speed (max.): 36,000 rpm, Perfect for: Highly efficient 3D milling of small workpieces – precise milling with high output Materials: Plastics, composite materials such as CFRP / GFRP, model-building materials, aluminum Industries: Automotive, aerospace, transport & logistics, leisure industry, sanitary, boatbuilding, automation Reference number: 1221 Availability: April 2026 Model: 5-axis CNC milling machine G-S-F/B (25-13) Spindle data: 8 kW / 6.4 Nm; 1,000–36,000 rpm; HSK E 40 Rapid traverse X/Y/Z: 80/80/60 Workpiece dimensions X/Y/Z: 2,500 x 1,300 x 600 Control: SIEMENS – Sinumerik One with HT 2 handheld terminal Ijdjx Uw Stjpfx Adwetb Tool changer: 13 tools Tables: 1 rotary table Vacuum system: yes Tool breakage and length detection: Renishaw TS 27 R Other: upon request Year of manufacture: 2026 Condition: new

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 5,000 rpm, total height: 1,840 mm, overall weight: 3,040 kg, controller manufacturer: FANUC, controller model: 18i-TB, number of axes: 4, This 4-axis Schaublin 140R CNC horizontal turning machine was manufactured in 2008. It features a CNC Fanuc 18i-TB control, a maximum turning diameter of 300 mm, and a spindle speed range of 50 – 5,000 rpm. Equipped with a Y-axis and sub-spindle, it offers a turret with 12 driven tool stations. If you are looking to get high-quality turning capabilities, consider the Schaublin 140R CNC machine we have for sale. Contact us for more information. Additional equipment • Machine supplied with manuals and CE conformity declaration Machine Benefits Technical Machine Benefits • Driven tool stations: 12 • Max tool size: 20 x 20 mm • Driven tool speed: 30 – 6000 rpm • Tailstock a2-3 Iodeyalqgjpfx Adwetb • Possibility to mount 3-jaw chuck: yes • Recommended max turning diameter: 200 mm • Coolant system: tank capacity 180 l, pump capacity 20 l/min, pump pressure 6 bar • Max turning diameter: 300 mm • Recommended max turning diameter: 250 mm • Equipped with y-axis and sub-spindle Extra Information Machine still under power Dimensions Machine Depth 2650 mm

Condition: used, Year of construction: 2010, Make RASOMA Model DZS 250-2 Year of Build 01.2010 Technical Details: Control SIEMENS SINUMERIK 840D Spindle Speed 3.500 rpm Turning diameter 260 mm Turning lenght 400 mm Tool Capacity 12 x Tailstock No Technical Details: Control CNC » SIEMENS » SINUMERIK 840D Spindle Speed 3.500 rpm Turning diameter 260 mm Turning lenght 400 mm Tool Capacity 12 x Tailstock No Chuck Iodjkyth Ispfx Adwetb diameter max. 260 mm Sled path X (per sled) approx. 900 mm Slide path Z 400 mm Turning spindle unit Spindle head A 6 (DIN 55026) Diameter in the front bearing 120 mm Spindle bore 38.1 mm Main drive Motorized insertion spindle with AC built-in motor, water-cooled, infinitely variable lubrication Lifetime grease drive power at 100% ED 28.3 kW at 40% ED 36 kW Speed ​​range 3500 rpm Torque on the turning spindle max. at 100% ED 300 Nm Feed drive X-axis via linear motor 1FN3 Rapid traverse speed 100 m/min Feed force 6915 N Z-axis via 1FT6 AC servomotors Rapid traverse speed 30 m/min Ball screw diameter 40 mm Feed force » 8 kN Tool system Disk turret tool holder mount VDI 40 tool positions 12 tool disk SW 320 position measuring system X-axis incremental linear length measuring system LC 183 Compressed air connection 6 bar Dimensions Length 5.276 mm Width 2.400 mm Height 3.310 mm

Condition: excellent (used), Year of construction: 2010, turning length: 230 mm, turning diameter: 230 mm, spindle speed (max.): 5,000 rpm, spindle bore: 68 mm, spindle nose: A2-6, Doosan TT1800SY Ijdpfx Adowzxcaowjtb

Condition: excellent (used), Year of construction: 2011, Year: 2011 (Commissioned in 2015) Table - Size range: 630mm - Positioning of the sub-table: 1 ° - Positioning of the turntable: 0.001 ° - Height of pallet: 1200mm Travel - X-axis: 1000mm - Y-axis: 800mm Iedpjnmx Tpsfx Adwetb - Z axis: 850mm - Distance between spindle center and table top: 200mm - 1050mm - Distance between spindle center and top of range: 100mm - 900mm feed - Rapid (same for X-, Y-and Z-axis): 60m/min - Cutting feed (equal to X, Y & Z axis): 0,001 - 30m/min spindle - Spindle speed: - min 14,000 rpm / 35 ATC (Automatic tool changer) - Number of tools: 60Stk. - Tool change time (tool to tool): 2.4 s - Tools used: SK 50 / debit pin BT Capacities - Operating Oil: 53l - Slide lube oil / lube spindle head: 3,0 l - Coolant for spindle & ball screw head: 37l Services - Positioning (X, Y, and Z-axes): + - 0.003 mm - Repeatability (X, Y, and Z-axes): + - 0.0015 mm!! - Payload Pallet: 800kg - Axial: 14700N

Condition: excellent (used), Year of construction: 2010, turning length: 230 mm, turning diameter: 230 mm, spindle speed (max.): 5,000 rpm, spindle bore: 68 mm, spindle nose: A2-6, DOOSAN PUMA TT1800 SY Iodsxx Nc Nspfx Adwjtb

Condition: good (used), Year of construction: 2005, Control: CNC control SIEMENS 840 D WORK AREA- Travel distance X-axis 650 mm Travel distance Y-axis 650 mm Travel Z axis 650 mm Number of NC axes 5 TABLE Rotability 360 ° - Positionability 0.001 ° - Rotation speed 30 / min Swivelability 210 ° - Positionability 0.001 ° - Rotation speed 10 / min WORKPIECE / HEAD spindle type Speed range of 45 / min Speed range up to 10000 / min Spindle diameter 80 mm tool holder Drive power (max.) 38 kW Spindal power (continuous) 25 kW Torque (max.) 132 Nm The following restrictions apply: Itedpfx Adsmt Erwjweb Maximum permissible weight of the moment captured on the gripper tool. 1 000 Ncm Maximum allowable tool weight 12 daN quick tool change up to the tool weight of 3 daN axis drives Feed of 1 mm / min Feed rate up to 60000 mm / min Rapid speed 60000 mm / min TOOL MAGAZINE Number of tool positions 40 Tool diameter max. 70 mm - with free neighbor position 163 mm Tool length max. 300 mm Tool change time 3.2 s DIMENSIONS / WEIGHTS Total weight approx. 16000 kg HELLER double-spindle horizontal-BAZ with A axis and 2 x B axis Machine is equipped with minimum quantity lubrication. Machine is disassembled and stored.

Condition: used, diameter 315 mm Isdpfx Aepp Dwdjdwetb Control / weight of the machine ca. / kg

Condition: used, Year of construction: 1989, control / centre distance // mm Isdpfxsud Inms Adwjtb greates pass round over bed / mm Control: TRAUB System TX-8 Spindle clearance (max. bars ®) mm 42 Chuck © mm 200 Turning diameter mm 180 Turning length mm 450 max. circulation ® mm 450 Rotation ® via sorting device mm 350 Rotation ® crosswise tailstock mm 180 Rotation ® over steady rest body mm 240 Longitudinal slide travel mm 490 Slide path flat mm 160 Spindle head DEN 55.026 = 26 - Spindle ® in front bearing mm 85 Power: 41 kW

Condition: new, Year of construction: 2025, sheet thickness - max. 8 mm pressure 200 t chamfer lenght 3200 mm engine output 15 kW return speed 105 mm/min working feed 9 mm/sec x-travel 600 mm Max. opening height 570 mm control DELEM DA53T GERD WOLFF KANTO 200T CNC Electro-Hydraulic Press Brake CNC axis accuracy 1) Machine sliders (Y1, Y2) – synchronisation precision: The slider movement axes control the bending depth and bending angle. The system consists of the control unit, two glass scales (Y1, Y2) installed on the work table, electro-hydraulic proportional valves and an amplifier. A closed control loop detects and controls the relative position of the slide and table as well as the speed and position of the slide. This ensures the synchronisation of the slide and maintains the bending depth and angle with high precision. Positioning accuracy: ±0.02 mm Repeatability: ±0.02 mm 2) Machine backgauge (X axis): The forward/backward movement of the X-axis controls the dimensions of the sheet metal cut. The stop bar is driven by a servo motor and moves the crossbeam via a ball screw and linear guide. Operation is stable and precise. Positioning accuracy: ±0.10 mm Repeatability: ±0.03 mm Itsdpfoxf Na Usx Adwsb 3) Mechanical compensation system (V axis): The pull plate of the mechanical compensation is moved by a motor so that the compensation points are formed in an arc shape. The points perfectly compensate for the elastic deformation of the work table and slide to ensure angular constancy and straightness of the workpiece. Position sensors and CNC control ensure precise regulation.

Condition: used, Year of construction: 2011, turning length 1500 mm control SINUMERIK 828D centre height 270 mm greates pass round over bed 540 mm swing diameter over slide rest 310 mm bed width 350 mm max. workpiece weight 1500 kg spindle bore 85 mm turning speeds 27 - 2250 U/min main drive DC 11 kW MACHINE EQUIPMENT: - AME chip conveyor - Lynette Iedpexyaf Rsfx Adwjtb - Heavy grey cast iron bed for optimum damping and reduced tool wear - Inductively hardened and parallel synchronised bed guides - Counter guides completely Turcite-coated and hand-scraped - Hardened and ground ball screws - Thermosymmetrical headstock - Main drive 11 kW - Infinitely variable speed range 27-2250 rpm with 3-stage gearbox

Condition: excellent (used), Year of construction: 2004, turning length / mm turning diameter over bed / mm turning diameter over slide / mm control / Universal lathe VDF Boehringer DUS 1000 ti OPTIONAL EQUIPMENT SURCHARGE: C-AXIS MILLING TOOL Machine no. 2042.6616-05 Year of construction 2004 Turning length approx. 2200 mm Swing diameter over bed 1,000 mm Swing diameter over bed 1,000 mm Centre height over flat track 500 mm Bed width 560 mm Bed slide guide length 800 mm Spindle diameter front bearing 170 mm Spindle bore 128 mm Infinitely variable three-phase motor (AC motor) Drive power 37 kW Torque max. 4,069 Nm Total speed range 6.4 - 1,600 Gear stages 2 Heidenhain control Manualplus 4110, completely renewed approx. 1 to 2 years ago renewed 2 lynchets Equipped with roto power chuck, diameter approx. 500 mm. Including many accessories of clamping jaws, estimated 15 sets, as well as approx. 15 sets of Multifix basic holders, size D. Machine was equipped with a separate milling device, with its own control, value approx. 20.000,00 €. Iodpfxoud In Hs Adwstb OPTIONAL EQUIPMENT SURCHARGE: C-AXIS MILLING TOOL Only operated by the owner, very good condition!

Condition: used, Year of construction: 2001, turning diameter / mm turning length / mm Iodpfxjx Tu Sue Adwetb control / total power requirement / kW weight of the machine ca. / t required space / m

Condition: used, Year of construction: 2006, Solid drill diameter / mm bore depth / mm number of spindles / Froriep CNC deep hole drilling machine – the prefabrication specialist Year of manufacture: 2006 Control system: Siemens Sinumerik 840D Max. drilling depth: 8,850 mm Workpiece diameter: 150 – 900 mm Speed range: 1 – 300 rpm Feed rate: 0.5 – 4,500 mm/min Drive power: 129 kW Swing diameter over bed: 1,000 mm Clamping diameter faceplate: 900 mm Weight: approx. 47,000 kg Ideal for precise pre-drilling of deep holes – including faceplate, steering ring Iodpfxoxgu R Ie Adwetb

Condition: used, Year of construction: 1980, turning diameter 7000 mm faceplate diameter 3500 mm workpiece height 3000 mm 160 mm 1998 Control Siemens 840 C max. table load 60000 kg electr. connected load 400 V Itjdpfeuddlzjx Adwjb Serial number 11 33 0051 total power requirement 71 kW weight of the machine ca. / t required space 13 x 6 m The SCHIESS-FRORIEP 40 DV is a vertical lathe built in 1980. The machine was modernized and improved in 1998. Among other things, a driven tool system (C-axis) was installed. In addition, the control system was modernized to SIEMENS 840 C. The large open-sided vertical boring mills with travelling column - type DV - are particularly suited to situations where likely workpieces frequently change in diameter but where maximum workpiece dimensions are rare. Decisions in favour of this type of machine are generally due to minimum floor space requirement, universal adaptability and economical advantages. The modern design of these machines is characterized by rigid all-steel construction optimized by computer - SCHIESS can claim to have done much valuable pioneering work in this area of heavy-duty machine tool building.