Used Cnc Machine for sale (64,884)

Year of construction: 2023, operating hours: 1,376 h, condition: used, machine/vehicle number: 180073, Swivel range: approx. 200 mm, machining length travel: approx. 100 mm, number of axes: 3 axes (X/Y/Z), SIEMENS Sinumerik control, IFS IFMC 1800 air filter unit, year of manufacture: 2021, serial no.: 565760-02, HYFRA E-Chilly 5-400V-S cooling unit, year of manufacture: 2022, serial no.: 10129303PC01240522, cooling capacity: approx. 5,480 m³/32° Celsius, LEHMANN UMT KSS0119 hydraulic unit, year of manufacture: 2022, net weight: approx. 610 kg, comprising: 1 HYFRA TRK-Chilly-45-EF-S cooling unit, year of manufacture: 2022, serial no.: 10132616PC01290722, 1 LEHMANN UMT FB100 chip conveyor, year of manufacture: 2022, serial no.: AUF007093-1, net weight: approx. 80 kg, 1 LEHMANN UMT VMA 100S GM WA magnetic unit, year of manufacture: 2022, serial no.: AUF007093-1, net weight: approx. 60 kg, 1 JOTKEL two-door steel cabinet, contents: various consumables. Njdpjyn Nldefx Ac Aowd

Year of construction: 2022, operating hours: 2,737 h, condition: used, machine/vehicle number: 110000503, Grinding wheel speed: up to 120 m/s, workpiece weight: up to 80 kg, control system, manufacturer: SIEMENS/MARPOS, type: Sinumerik/P7, 1 automated workpiece unloading station, manufacturer: JOVI, type: 1113A, year of manufacture: 2022, net weight: approx. 300 kg, 1 air filter unit, manufacturer: IFS, type: VARIO M 2000, serial number: 568113, year of manufacture: 2022, net weight: approx. 120 kg, connected load: 400/460 V, 50/60 Hz, 0.7 kW, 1.7/1.6 A, 1 water cooling unit, manufacturer: HASCH, type: MCW-50CT-17AUZ1-3407C, serial number: 1001220302582, year of manufacture: 2022, net weight: approx. 150 kg, tank capacity: approx. 15 l, 1 coolant filtration system, manufacturer: MICRONFILTER, type: Easy 250/KMT350, serial number: 0201, year of manufacture: 2022, tank capacity: approx. 2,300 l, connected load: 400 V/50 Hz, 5.34 kW, 1 immersion cooler, manufacturer: HASCH, type: MCS-120ST-05AOP6R7S6UZ1-3407C, serial number: 1003220400836, year of manufacture: 2022, net weight: approx. 206 kg, 1 coolant tank, manufacturer: MICRONFILTER, type: VR200L/MIN-150L, serial number: 0201, year of manufacture: 2022, tank capacity: approx. 150 l, connected load: 400 V/50 Hz, 1.1 kW, 1 magnetic separator, manufacturer: MICRONFILTER, type: KMT350, serial number: 0212, 1 loading unit, manufacturer: DANOBAT, type: rotary table lift, serial number: 3810490908, year of manufacture: 2022, net weight: approx. 170 kg, max. load capacity: approx. 230 kg, 1 rotary table transport trolley Njdpfsyn Nlqex Ac Aswd

Year of construction: 2018, operating hours: 28,658 h, condition: used, machine/vehicle number: 18E400239, Through-feed grinding, grinding range Ø: 10 cm, plunge grinding, grinding range Ø: 15 cm, weight: 9,000 kg, FANUC 0i-MF control, 2 handling robots YASKAWA YR-MH005LS-E000, serial numbers: R17507-979-3 / R19033-789-1, automation system/workpiece storage EGS Automation Tschudin, year of manufacture: 2018, serial number: 180100, 4-way, oil cooling and filtration system ARO, year of manufacture: 2018, serial number: PRA0032086, protective guard Nwodpfoyn Nk Hex Ac Ajd

Year of construction: 2022, operating hours: 7,315 h, condition: used, machine/vehicle number: 100644, Max. grinding wheel diameter: approx. Ø 915 mm, max. workpiece diameter: approx. Ø 440 mm, max. workpiece weight: approx. 250 kg, max. grinding wheel speed: approx. 80 m/s, operating pressure: approx. 6 bar, control system, manufacturer: DANOBAT/SIEMENS/MARPOS, type: Sinumerik/P7, 1 automated workpiece removal station JOVI 1113B, year of manufacture: 2022, net weight: approx. 300 kg, 1 air filter unit IFS M 1600, year of manufacture: 2022, serial no.: 567663, net weight: approx. 85 kg, connected load: 380-460 V, 50/60 Hz, 0.7 kW, 1.5-2.1 A, 1 hydraulic unit REXROTH Depósito HE-16120, 1 coolant filtration unit MICRONFILTER Easy 250/KMT350, year of manufacture: 2022, serial no.: 0201, tank capacity: approx. 2,300 l, connected load: 400 V/50 Hz, 2.44 kW, 1 immersion cooler HASCH MCS-120ST-05AOP6R7S7UZ1-3405C, year of manufacture: 2022, serial no.: 1003220300954, net weight: approx. 206 kg, 1 magnetic separator MICRONFILTER KMT350, serial no.: 0211, 1 tool loading unit, DANOBAT rotary table lift, year of manufacture: 2022, serial no.: 3130490901, net weight: approx. 350 kg, max. payload: approx. 360 kg Nedpjyn Nlwefx Ac Aswd

Year of construction: 2021, operating hours: 5,475 h, condition: used, machine/vehicle number: 100000736, max. centre distance: 60 cm, max. grinding diameter: 44 cm, max. workpiece weight: 500 kg, control: SIEMENS Sinumerik/Balance Systems VM25, handling robot YASKAWA YR-1-06VXH12-A00, year of manufacture: 2022, serial number: 6V2272528290001, automation system/workpiece storage EGS Automation Danobat CG600-BL1, year of manufacture: 2023, serial number: 190605-6, 2-fold, filter 3FS M1600, no.: 565209, year of manufacture: 2021, weight: 85 kg, oil band filter MICROFILTER Easyband 150, serial number: 0202, year of manufacture: 2021, pump REXROTH HM-46, safety enclosure Nsdpfjyn Nk Tox Ac Aswd

Condition: ready for operation (used), Year of construction: 2001, Technical Features of this Bridge Type Milling Machine Manufacturer ZAYER Model KPU-5000 AR Year 11/2001 CNC HEIDENHAIN TNC-430 Table surface 6.500 x 1.800 mm Longitudinal travel (X Axis) 6.500 mm Cross travel (Y Axis) 3.050+873 mm Vertical travel (Z Axis) 1.250 mm Distance between columns 2.450 mm Maximum height between spindle nose and table with spherical head 1.565 mm. Maximum height between spindle nose and table with 45º head in vertical position 1.574 mm. Rapid feed (X, Y, Z) 25.000 mm/min Max. working feed 15.000 mm/min Heads 45º Automatic head INCLUDED 45º Head (A Axis / B Axis) 360.000 posiciones Automatic Head 45º Taper ISO-50 – DIN 69871 Automatic Head 45º Speed 6.000 r.p.m. Spherical Rotation Head INCLUDED Direct Output Head Nwsdpfx Acjyxv Uns Aed Taper ISO-50 Main Motor Power 37 kW. Speed Ranges 2 Manual Head Change INCLUDED Retractable Automatic Support in the Right Side For 45º Head INCLUDED Retractable Automatic Support in the Right Side For Direct Output Head INCLUDED Ethernet Connection INCLUDED Double Chip Conveyor One at each side of the machine INCLUDED 1000 l Oil Tank with Filter Paper + Magnetic Separator INCLUDED Internal coolant 20 Bar INCLUDED External coolant10 bar INCLUDED Automatic tool changer INCLUDED ATC positions 60 CNC 3D ROT Function INCLUDED Others Positioning Accuracy 0.010 mm. Repetitive Accuracy 0.005 mm. Handwheel HEIDENHAIN HR-410 Carrying Load Table 20.000 Kg. Machine Weight 52.000 Kg.

Condition: used, Year of construction: 1998, operating hours: 97,593 h, functionality: fully functional, turning diameter: 65 mm, spindle bore: 79 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, For Sale: Gildemeister MF Sprint 65 CNC Sliding Headstock Lathe with 3-Meter Bar Feeder, as shown in the pictures. The machine was removed from our workshop in fully functional condition. A video of the machine in operation prior to disassembly is available upon request. Approximately five years ago, the linear guides of the X1 and Z1 slides (on the main spindle side) were replaced, including bearings and belts. A new HMI interface was installed recently. Detailed specifications and technical data can be found in the attached PDF. TECHNICAL DATA Control: Sinumerik 840C Bar Feeder: SIMAG 65.1-3200G, Year of Manufacture: 1998 Bar Length: 3 meters Bar Diameter / Spindle Bore: 65 mm Main Drive Power Output: 28 / 21 kW Speed Range: 25 – 4,500 rpm Torque: 320 / 240 Nm Maximum Feed Rate for Thread Cutting: 10 m/min C-Axis Speed: 120 rpm C-Axis Torque (Holding Torque): 180 Nm Tool Carrier Number of Tool Stations: 8 Shank Diameter (DIN 69880): 30 mm Number of Driven Tool Stations: 4 Power Output: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Maximum Speed of Tool Carrier 1: 4,000 rpm Maximum Speed of Tool Carrier 2: 4,000 rpm Slide 1 Cross Travel / Longitudinal Travel: 155 / 280 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Njdowym Nfopfx Ac Aowd Feed Force X/Z: 900 / 900 daN Slide 2 Cross Travel / Longitudinal Travel: 82 / 120 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN MACHINE DATA Dimensions with Bar Feeder and Chip Conveyor (L × W × H): approx. 6 × 2 × 2 meters Weight: approx. 6.5 tons Operating Voltage: 50 Hz, 400 V Accessories: Cooling System Chip Conveyor Documentation The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. Delivery ex works excluding packaging and insurance, unless otherwise agreed. The price does not include statutory value added tax. As is usual with used machines, payment is made before loading.

Condition: used, Year of construction: 2022, Working length: up to 7,000 mm Mode: single continuous working area Axes: 4 controlled CNC axes Tool rotation: from 0° to 180° Spindle power: 5 kW (S1) Tool magazine: 8 automatic tools Clamping: pneumatic clamps (compact design to allow maximum workability even with short parts) Structure: closed cabin (safety and soundproofing) Power supply: 400 V Frequency: 50 Hz Installed power: approx. 8 kW Compressed air: 7 bar Machine weight: approx. 3500–3600 kg X-axis speed: up to approx. 90 m/min Operations: milling | drilling | tapping | end machining Njdpfeywhuqox Ac Aewd Materials: aluminium | PVC | light alloys | light steel (up to approx. 2 mm)

Year of construction: 2005, condition: used, CNC Machining Center 4 Axes – FOM (Aluminium/Steel Profiles) Configuration: 4-axis CNC Working length (X): 7,030 mm Condition: Working, maintained - Main Features CNC machining center designed for drilling and milling operations on aluminium and steel profiles, ideal for window and industrial profile production. 4-axis spindle (0° / 90° / 180°) for multi-side machining Electrospindle 4 kW – up to 12,000 rpm Tool holder: ISO 30 DIN 69871 6-position automatic tool magazine 6 pneumatic clamps (manual positioning) THK linear guides for high precision - Control & Software Software: FomCam + Prof2 (Windows XP) Easy programming with automatic CNC generation Movable control console (PC + display + keyboard) Barcode reader connection Remote control capability 📏 Technical Data X-axis: 7,030 mm Y-axis: 1,100 mm Z-axis: 425 mm Nwsdpfoywhf Nsx Ac Aod Machine dimensions: 8,307 x 1,875 x 2,460 mm Weight: 3,200 kg - Equipment Forced air spindle cooling Inverter-controlled spindle Automatic lubrication Protected tool magazine with rotary system - Machine ready to work, ideal for aluminium profile machining and window production.

Condition: ready for operation (used), Year of construction: 2016, A defective CHC stone processing center Intermac is available. Travel X/Y: 2300mm/1000mm, material thickness range: 2mm-25mm, speed: 12000rpm, machine dimensions X/Y/Z: approx. 4700mm/2700mm/2700mm, weight: approx. 3500kg. A cost estimate from the manufacturer is available. Documentation available. An inspection on site is possible. Nwodpfx Aeyxq T Ssc Aed

Condition: repair required (used), Year of construction: 1998, functionality: limited functionality, 2 drilling spindles, individually selectable 1 glue gun (note: glue pump missing) Nodpjytq R Eofx Ac Aowd Dowel insertion tool for 8 x 40 mm dowels The following issues were identified during testing: - Glue specification missing - Center stop rule missing - On the left working field, the front stops do not engage; instead, they lower when drilling on the right field - SPS module Beckhoff repeatedly fails. Machine must then be restarted. - Rubber pads under the hold-downs are missing. When inserting the dowels, the parts deform because the surface is too smooth

Condition: like new (used), Year of construction: 2016, operating hours: 31,881 h, grinding length: 3,350 mm, total width: 3,600 mm, total length: 9,400 mm, total height: 2,000 mm, grinding diameter: 595 mm, distance between centers: 3,000 mm, Year of manufacture: 2013 CNC Controller: FAGOR 8055TCO Capacity Distance between centers (mm): 3000 Height between centers (mm): 300 Height between centers from the ground (mm): 1200 Grinding diameter (mm): ø 595 Max. workpiece weight between centers (kg): 2000 Nwedpfoyudtpox Ac Aed Max. Workpiece weight with tool (kg): 200 Table (Z-axis) Maximum travel (mm): 3350 Rotating table plate ±5° Feed rate (mm/min): 0.01 ÷ 6000 Minimum programmable increment (mm): 0.001° Grinding carriage (X-axis) Maximum travel (mm): 500 Feed rate (mm/min): 0.01 ÷ 6000 Minimum programmable increment (mm): 0.001° Resolution (mm): 0.0005° Grinding head Left grinding wheel diameter (mm): 600 Peripheral speed (m/s): 45 Workpiece head Spindle speed (rpm): 9 ÷ 250 CM taper: 5 Spindle type: 8" Tailstock Type: Manual handwheel Spindle taper (cm): 6 Maximum spindle travel (mm): 60 Quill diameter (mm): 85 Maximum taper correction (mm): ±0.1 Equipment Tailstock diamond dresser with diamond holder Diamond Grinding wheel guards according to ISO, OSHA, and UNE standard +Two-door enclosure Paper feeder and magnetic separator Grinding wheel balancing shaft MARPOSS electrodynamic balancer Grinding wheel safety sensor Touch-type axial positioner with T25 probe Grinding wheel chuck Driving dog sets Basic machine dimensions / weight Length (mm): 9400 Width (mm): 3600 Height (mm): 2000 Weight (kg): 15000 Air or water through spindle center DXF import function Spindle 2, workpiece unloader Working time hours Under power: 31881 Spindle 1: 8860 Spindle 2: 9774 Rated power kVA: 61 Basic machine dimensions / weight Length mm: 4200 Width mm: 2600 Height mm: 2586 Weight kg: 15000

Condition: like new (used), Year of construction: 2004, Retrofitted: 2025 Nsdpjyf Rqvofx Ac Aewd Numerical control: HEIDENHAIN TNC-530 Technical features Dimensions Table dimensions: 4500 x 2000 mmNumber of T slots: 11T slots dimensions: 22 mm Traverses of axis X axis traverse: 4000 mmY axis traverse: 3000 mmZ axis traverse: 1000 mmVertical capacity (VC): 500 / 1500 mm  (in direct exit)Distance between columns: 2500 mm Milling head Universal manual UM40Tool clamping system: HydraulicTaper nose: ISO50Speed range: 20 - 3.000 r.p.m. (5.000 r.p.m. direct exit)Spindle power: 30 kW Feedrates Feedrate: 7000 mm/minRapid feedrate (X / Y,Z): 15000 / 12000 mm/min Weight and dimensions Maximum weight on table: 10000 KgMachine weight approximate: 45300 KgMachine dimensions approximate: 10926 x 4768 x 5110 mm Accesories Guarding: 2 sliding doors and new perimetral wire-mesh security ernal coolant. Electronic handwheel: New HR-510 Sales conditions Guarantee: 6 months mechanical partsConditions and sale price: On request View all technical features

Condition: excellent (used), travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, feed rate X-axis: 5,000 m/min, feed rate Y-axis: 5,000 m/min, feed rate Z-axis: 5,000 m/min, total height: 2,200 mm, total width: 2,300 mm, total length: 1,990 mm, table width: 400 mm, table length: 800 mm, rotational speed (min.): 5,000 rpm, table load: 300 kg, overall weight: 2,200 kg, Universal milling machine with toolmaker precision  Small-batch production to complex workpieces Vertical milling head with hydraulic tool clamping Y and Z Milling Handwheel in all three axes Linear guideways in all three axes Workspace guard retractable with large chip shield Main motor with spindle brake    X - Travel: 450mm Y - Travel: 400mm Z - Travel: 350mm Table Length: 800mm Table Width: 400mm Table load: 300 Feed rate X-Axis:5000mm/min. Feed rate Y-Axis:5000mm/min. Feed rate Z-Axis:5000mm/min. Nwedoyucc Nopfx Ac Aed Spindle Taper: 40ISO/Bt/Mk Power on spindle:10kW Speeds / ranges:5000Rpm Length: 1990mm Width: 2300mm Height: 2220mm Weight: 2200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2019, travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, feed rate X-axis: 5,000 m/min, feed rate Y-axis: 5,000 m/min, feed rate Z-axis: 5,000 m/min, total height: 2,220 mm, total width: 2,300 mm, total length: 1,990 mm, table width: 400 mm, table length: 800 mm, table load: 300 kg, overall weight: 2,200 kg, CNC milling machine EMCO - FB 450 MC MACH-ID 9401 Make: EMCO Type: FB 450 MC Control: Siemens 828D ShopTurn Year: 2019 Universal milling machine with toolmaker precision  Small-batch production to complex workpieces Nwodpeyub Udjfx Ac Asd Vertical milling head with hydraulic tool clamping Y and Z Milling Handwheel in all three axes Linear guideways in all three axes Workspace guard retractable with large chip shield Main motor with spindle brake    X - Travel: 450mm Y - Travel: 400mm Z - Travel: 350mm Table Length: 800mm Table Width: 400mm Table load: 300 Feed rate X-Axis:5000mm/min. Feed rate Y-Axis:5000mm/min. Feed rate Z-Axis:5000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle:10kW Speeds / ranges:5000Rpm Length: 1990mm Width: 2300mm Height: 2220mm Weight: 2200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2010, Immediately available ex location: CNC bed milling machine Wagner Type WBE 1300 R Year of manufacture: 2010 Siemens Sinumerik 810 D Table 1500 x 400 mm Travel X/Y/Z: 1300/500/570 mm SK 40 Automatic tool clamping Drive power 12/9 kW Spindle speeds 60 – 8,000 rpm Electronic handwheel Ball screw Vice Nwedpfx Acjyxbwno Ajd Various tool holders Weight 4 t Price: EUR 5,500 plus VAT ex location

Condition: ready for operation (used), Year of construction: 1992, A Bridgeport CNC vertical machining center is available. Travel X/Y/Z: 1020mm/510mm/500mm, rapid traverse: 40m/min, feed rate: 10m/min, table dimensions X/Y: 1150mm/490mm, max. table load: 900kg, tool holder: BT40, tool stations: 30, machine dimensions X/Y/Z: approx. 2700mm/2550mm/2450mm, weight: approx. 3800kg. Documentation vorhanden. An on-site inspection is possible. Nsdpfx Acjyw Sv Ss Aowd

Year of construction: 2013, condition: ready for operation (used), A Knuth CNC vertical milling machine is available. Travel X/Y/Z: 385mm/230mm/385mm, table dimensions X/Y: 800mm/240mm, max. table load: 100kg, reach: 300mm, speed: 3000rpm, rapid traverse: 6m/min, feed rate: 2m/min. Machine dimensions X/Y/Z: approx. 1850mm/1650mm/2000mm, weight: approx. 1500kg, control: Knuth GPlus 450. Documentation available. An on-site inspection is possible. Njdpoyw Svlefx Ac Aswd

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 1400mm/630mm/600mm, table dimensions X/Y: 1800mm/630mm, maximum workpiece weight: 1000kg, spindle taper: ISO50, speed: 2800rpm, torque: 1600Nm, spindle drive: 15kW, machine dimensions X/Y/Z: approx. 3450mm/4300mm/2300mm, weight: approx. 5850kg, documentation available, an on-site inspection is possible. Nwsdpfjyw Swcex Ac Aod

Condition: used, machine/vehicle number: 008389, X axis working area: 8417 mm Y axis working area: 1930 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 40 Nwjdpoyqxxrefx Ac Aed Total number of tool changer positions: 22

Condition: used, 1 piece CNC wire bending machine ROBOMAC 206 with various accessories, as per photos and inspection. Colour: grey/red. Condition: used. Storage location: production hall / right side. Payment method: advance payment by bank transfer. Shipping: Collection only – shipping is not offered for this item! Nwodeyr H Nhjpfx Ac Asd

Condition: ready for operation (used), Specifications Manufacturer NILES Model ZSTZ 08 CNC Condition Used Stock Number in fabbrica Max diameter 800 mm Nwjdsv Iaqgjpfx Ac Asd Max module 14 Min-max number of teeth 5-315 Machine weight 14500 kg Machine dimensions 6000x3500x2800 mm min-max grinding wheel revolution 100-1250 rpm Description Equipped with New electrical system

Condition: used, 1 unit CNC machining center HK BA 32 CNC with 3 tool cabinets and various accessories, as shown in the pictures and inspection. Color: green. Condition: used. Storage location: production hall / left. Payment method: advance payment by bank transfer. Shipping: Pick-up only – no shipping offered for this item! Nwedpfx Ajyr Hygoc Ajd

Condition: used, 1 unit CNC machining center MAZAK NEXUS510C Travel distances X1050mm, Y510mm, Z510mm, with chip conveyor, tool holders, trolley 90x60x100cm, 2x material cabinets 70x55x105cm/50x50x100cm, with various contents, as shown in the photos and inspection, self-disassembly Condition: used Storage location: production hall / right Payment method: advance payment by bank transfer Shipping: Collection only - No shipping offered for this item! Nedoyr Hwfjpfx Ac Aowd

Condition: used, Year of construction: 1998, 1 unit CNC machining center MAZAK VTC-20C Travel paths: X1660 mm, Y510 mm, Z510 mm, with chip conveyor, workbench 120x70x85 cm and height-adjustable vise, tool holders, cutting tools, tool cabinet 70x55x105 cm with various contents, as per photos and inspection, self-dismantling Nedpoyr Hvnsfx Ac Aewd Year of manufacture: 1998 Condition: used Location of goods: production hall Payment method: advance payment by bank transfer Shipping: Pick-up only – Shipping is not offered for this item!