Used Cnc Milling for sale (15,832)

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 00820002981, turning length: 800 mm, turning diameter: 500 mm, spindle speed (max.): 3,600 rpm, spindle bore: 118 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 30 m/min, bar passage: 102 mm, total height: 2,500 mm, total length: 8,000 mm, total width: 2,400 mm, overall weight: 10,000 kg, controller manufacturer: DMG, controller model: ERGOLINE, input voltage: 400 V, input frequency: 50 Hz, input current: 125 A, nominal power (apparent): 74 kVA, operating hours of spindle: 4,439 h, Equipment: chip conveyor, DMG MORI CTX BETA 800 TC CNC turning and milling center Tjdpfx Afszxx Dcs Ajc - Note: the spindle hours may increase slightly! - Swing diameter: 500 mm - Distance between centers: 1020 mm - Max. workpiece weight (chuck parts/chuck weight): 100 kg - Max. workpiece center of gravity from spindle flange: 120 mm - Travel X1: from -10 to 490 mm - Travel Y1: +-100 mm - Travel Z1: 845 mm - Travel Z2: 600 mm - Travel Z3: 800 mm - Spindle flange diameter: 220 H 5 mm - Chuck diameter: 315 mm - Diameter of front bearing: 160 mm - Rapid traverse speed, Z-axis: 40 m/min - Resolution, Z-axis: 0.001 mmm - B-axis max. swivel speed: 70 rpm - Angular resolution: 0.001° - Tailstock travel: 800 mm - Quill force: 8 kN The machine is equipped with a tailstock and a three-jaw chuck, diameter: 250 mm, as well as a chip conveyor and coolant system. FCA D-63843 Niedernberg - loaded onto a truck.

Year of construction: 2011, operating hours: 45,000 h, condition: good (used), functionality: fully functional, travel distance X-axis: 410 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 805 mm, spindle diameter: 150 mm, spindle bore: 51 mm, spindle speed (max.): 5,000 rpm, MAZAK INTEGREX 100 IV ST multitasking center Year 2011 Control unit: Matrix Maximum workable length: 753 mm Maximum workable diameter: 545 mm Bar diameter: 51 mm Main spindle diameter: 200 mm, 2-jaw chuck Main spindle power and speed: 11 KW, 5000 rpm Tsdpozz Rxwsfx Af Aoc C-axis: 360° Counter-spindle diameter: 200 mm, 2-jaw chuck, self-centering Counter-spindle power and speed: 11 KW, 5000 rpm C-axis on counter-spindle: 555 X-axis travel: 410 Y-axis travel: 140 Z-axis travel: 805 B-axis travel: 225° Milling spindle power: 5.5 KW Milling spindle speed: 12,000 rpm Spindle mounting: CAPTO C6 Maximum tool storage capacity: 40 tools Lower turret: 9 positions, CAPTO High-pressure system through the spindle: 20 BAR Chip conveyor: belt type Automatic door Robot interface

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 34, spindle bore: 86 mm, overall weight: 16,000 kg, Turning and Milling Center acquired through business takeover Manufacturer: Mori Seiki / Model: MT 250S / 1500 / Year of Construction: 2000 / Refurbishment cost: 200,000 Euros Condition: good, Control: CNC Mori Seiki MSC 501 Technical Data: See attached PDF Max. turning diameter: 570 mm Turning length: 1530 mm Max. swivel diameter: 800 mm Swivel diameter over cross slide: 420 - 860 mm Distance between centers: 1,828 mm Main spindle: Speed range: 35 - 3500 min-1 Main spindle power: 18.5 kW / 15 kW Number of curve speeds: 2 Spindle nose: JIS A2-8 Max. bar capacity: 73 mm Spindle bore: 86 mm Spindle bearing diameter: 130 mm C-axis: 0.001° Tailstock: Tailstock spindle speeds: 50 - 3500 min-1 Tailstock power: 11 / 7.5 kW Number of curve speeds: 2 Spindle nose: JIS A2 - 6 Max. bar capacity: 60 mm Spindle bore: 73 mm Spindle bearing diameter: 110 mm Tsdpfx Aozxg Sujf Aec C-axis: 0.001° Milling spindle: Spindle speeds: 8000 min-1 Power: 7.5 kW / 5.5 kW Tool taper: KM 63 Spindle bearing diameter: 80 mm B-axis: 120° / 105° Resolution: B 0.001° Number of tools: 42 Tool taper: KM 63 Max. tool diameter: 80 / 125 mm Max. tool length: 400 mm Max. tool weight: 8 kg Tool change time: 1.6 sec. X-axis: 635 mm / Y-axis: + / - 110 mm / Z-axis: 1595 mm / B-axis: 120° / 105° + Chuck: Rapid traverse (X/Y/Z): 24 / 24 / 30 m/min Max. feed rate: 30,000 mm/min / Total power: 72.3 kW / Weight: 22 tons / Dimensions: 7.0 x 3.5 x 3.5 m, Steady rest: 30 Tailstock: Not required 31 Tool magazine capacity: 42 32 Chip conveyor: Available 33 Chip conveyor type: Slatted belt 34 Chip container: Available 35 Cooling system: Standard (635 W / 1040 W) 36 Coolant supply through the tool spindle: Available 37 Compressed air cleaning of chuck (spindle 1): Available 38 Compressed air cleaning of chuck (spindle 2): Available 39 Tool presetter (in the machine, spindle 1): Automatic 40 Bar loader: Interface only 41 Measuring system X-axis: Heidenhain 42 Signal light: 3-stage signal tower (red, milky white, green) 43 Foot switch for chuck: Double foot switch 44 Steady rest: Automatically centering steady rest (programmable) 45 Type of automatically centering steady rest: SLU3 (SMW) 46 Steady rest unit (SMW): Available 47 Automatic door: Available 48 Hydraulic fluid (fluorocarbon): Not compatible 49 Number of total counters: 1 50 Number of workpiece counters: 1 51 Automatic shutdown: Available 52 Language of NC screen: Spanish 53 Language of PC screen: Spanish 54 Language of warning screen: Spanish 55 Memory capacity for part program (m): 1160 m 56 Number of stored programs: 125 57 Number of tool correction pairs: 240 58 Optional sentence masking: Softkey version 59 Programmable data input: Available 60 Number of shared variables for user macros: 600 61 Tool life monitoring: B 62 Number of tool life monitoring (MORI): MAX. 128 PAIRS * 4 63 LOAD MONITORING: B

Condition: excellent (used), Year of construction: 1989, I am selling a CNC lathe Mazak QuickTurn 20N. Lathe in bdb condition. Equipment: MAZATROL T-2, control MAZATROL CAM-T-2. Tjdpfxju U R E Ao Af Asc

Condition: like new (used), Year of construction: 2019, CNC twin-spindle turning center, 8 axes Goodway GTZ-2600Y Year of manufacture 2022 Fanuc CNC control 8 axes Turning diameter 250 mm Turning length 600 mm Main spindle: Bar capacity 65 mm. Spindle drive power 11 kW. Spindle speed 4,000 rpm. C-axis 0.001°. Counter spindle: Bar capacity 65 mm. Spindle drive power 11 kW. Spindle speed 4,000 rpm. C-axis 0.001°. Counter spindle travel in the B-axis: 690 mm. Tool turret I 16 stations Driven stations (possible) 16 Tool drive power 3.7/5.5 kW Tool speed up to 6,000 rpm. X1 axis travel: 195 mm Z1 axis travel: 620 mm. Y-axis travel: +/- 50 mm (for off-center machining) Tool turret II Tedpezw Ugwofx Af Asc 16 stations Driven stations (possible) 16 Tool drive power 3.7/5.5 kW Tool speed up to 6,000 rpm. X2 axis travel: 210 mm Z2 axis travel: 620 mm. Total weight approx. 11,000 kg.

Condition: used, functionality: fully functional, machine/vehicle number: 24423, turning length: 200 mm, turning diameter: 210 mm, spindle motor power: 11,185 W, spindle speed (min.): 40 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 58 mm, travel distance X-axis: 178 mm, travel distance Z-axis: 203 mm, rapid traverse X-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, type of input current: three-phase, feed length X-axis: 178 mm, feed length Z-axis: 203 mm, bar passage: 58 mm, total height: 1,800 mm, total length: 2,300 mm, chuck outer diameter: 203 mm, total width: 2,700 mm, bar diameter (max.): 58 mm, spindle nose: A2-6, overall weight: 8,000 kg, spindle diameter: 203 mm, working range: 200 mm, Equipment: rotational speed infinitely variable, Okuma & Howa ACT-2SP-2 CNC lathe with two parallel spindles, equipped with an Okuma OSP5020L numerical control system. The machine features two hydraulic self-centering chucks and two independent tool turrets, enabling the simultaneous machining of two workpieces. Todpfx Afszpd Alo Aoc Key features: Turning diameter: approximately 210 mm Turning length: approximately 200 mm Chuck diameter: approximately 203 mm Chuck bore: approximately 58 mm X-axis travel: approximately 178 mm Z-axis travel: approximately 203 mm Spindle speed: approximately 40–4,000 rpm Spindle power: approximately 11 kW per spindle CNC control: Okuma OSP5020L Serial number: 24423 Chip conveyor/extractor included The machine is complete with all its main components, currently not in operation and requiring functional testing. Sold as is. Loading onto the transport vehicle will be handled by the seller. Transportation costs remain the responsibility of the buyer. The machine can be inspected at our facility.

Condition: used, Year of construction: 2005, functionality: fully functional, turning length: 1,500 mm, spindle speed (max.): 4,000 rpm, rotational speed (max.): 4,000 rpm, overall weight: 14,400 kg, Mazak Integrex 300 3 ST Control -Mazatrol 640 mt pro 2 Spindles 1500mm No CE 2005/05 in very good condition Turret lathe.....10 tool Tedpfxex Rkvqj Af Ajc ATC.....40 tool Maximum Swing 33.5″ 850.9 mm Maximum Swing (Y-axis use) 26″ – 33.5″ 660.4 mm – 850.9 mm Maximum Swing over Cross Slide 33.5″ 850.9 mm Maximum Swing over Lower Turret 16.5″ 419.1 mm Located in Israel under power and ready for inspect . This CNC made in Japan and definitely needs a permit of MATI

Condition: like new (used), Year of construction: 2019, operating hours: 44,087 h, functionality: fully functional, machine/vehicle number: 02620000651, overall weight: 6,360 kg, Equipment: documentation/manual, Gildemeister/DMG Mori CTX 2500/700 CNC Turning Machining Center (2019) – used and operational The machine is operational and in good condition, and is available for any testing. Year: 2019 Technical details: Serial No.: 02620000651 Driven spindles: Rated speed: 4,000/5,000 rpm Net weight: 6,360 kg Total operating hours: 44,087 h Spindle hours: 27,832 h Cooling unit Chip conveyor Tedpfxszxxh Ue Af Asc Coolant treatment system Control system Manufacturer: DMG Mori Model: Ergoline Tool turret 14 positions For driven tools Condition: very good, operational Ready for immediate delivery The machine runs without any problems. The machine is available at H.B.R. srl – Calolziocorte (LC) – Italy. You can inspect and test the machine with your own staff.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, EMCO EMCOMAT FB-450 MC | DEMO | Sinumerik 828D | Warranty Description EMCO EMCOMAT FB-450 MC – DEMO machine in like-new condition Universal CNC toolroom milling machine equipped with a SIEMENS Sinumerik 828D control. The machine was manufactured in 2019 and has never been used in production. It was used solely as a demonstration machine and has very low operating hours. Tedpfez Dib Tex Af Aoc The machine is in excellent, near-new condition and is offered with extensive accessories included in the price. 6-month warranty on spare parts included. The EMCOMAT FB-450 MC is a highly versatile machine suitable for toolrooms, prototype production, maintenance departments, and precise single-part or small-batch production. It allows both vertical and horizontal milling. Technical specifications Working area X-axis travel: 450 mm Y-axis travel: 350 mm Z-axis travel: 400 mm Spindle center distance: 40–440 mm Rapid traverse X/Y/Z: 5,000 mm/min Working feed X/Y/Z: 10–5,000 mm/min Feed force X/Y/Z: 10 / 10 / 15 kN Table Clamping surface: 800 × 400 mm Maximum table load: 300 kg Spindle Spindle speed: 10–5,000 rpm Spindle power: 10 kW Tool interface: ISO 40 Machine CNC control: SIEMENS Sinumerik 828D Dimensions (L × W × H): 1,980 × 2,030 × 1,990 mm Machine weight: approx. 2,270 kg Year of manufacture: 2019 Included equipment SIEMENS Sinumerik 828D CNC control Electronic handwheel Rotary table/turntable for vice Support arm for horizontal milling Installation rubber pads Side storage holders for 27 milling tools Set of 12 ISO 40 milling tool holders, including holders for horizontal milling Machine manual 6-month warranty on spare parts Condition DEMO / LIKE NEW The machine has never been used in regular production and was operated only for demonstration purposes. Machine can be inspected and demonstrated under power by prior appointment. Available for delivery.

Condition: used, Year of construction: 2013, functionality: fully functional, Equipment: documentation/manual, Mazak Machining Center 5-Axis (4 + 1 Positional) Variaxis J-500 Model Year 2013 Mazatrol Matrix Nexus 2 CNC Tedpfxszxpv Ns Af Ajc

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, CNC Horizontal Lathe Mori Seiki NL2000Y/500 Year 2012 Controller : MAPPS III Max Swing Ø923mm Max over cross slide Ø755mm Max Turn Ø356mm Bar Capacity Ø65mm Tsdewvrfkjpfx Af Aoc Travel X260mm / Z590mm Y +/-50mm Spindle Speed 5000rpm Turret 12 stations Max. milling speed 6,000rpm Chip conveyor Stock Clearance at 39.000EUR ONLY

Year of construction: 2022, condition: excellent (used), functionality: fully functional, We offer this like-new LIYU IECHO TK4s cutting plotter / CNC milling machine, manufactured in 2022. Manufacturer: LIYU IECHO Model: TK4s Year of Manufacture: 2022 Condition: Like new Machine Type: Cutting Plotter / CNC Milling Machine PLATINUM Q-CUT 3532 flatbed cutter with camera + 1.8 kW milling module Includes software, monitor, and PC. Used very little and in excellent condition. Working area of 3500 x 3200 mm Equipped with an automatic camera positioning system (CCD), regional vacuum system, AKI system for precise knife depth adjustment, and 2 motors on the X-axis for high accuracy and clean cutting results. Material thickness up to 45 mm Max. cutting speed 1500 mm/s Cutting accuracy ± 0.1 mm Formats: PLT, DXF, HPGL, PDF, EPS Vacuum pump: 7.5 kW 6-zone control system Two cutting heads, safety device, automatic tool adjustment Tools / Applications Kiss-cut, UCT, EOT, EOT3, PRT, DRT, V-CUT, CTT, 1.8 kW router, punching tool. Suitable for cardboard, DiBond, Forex, MDF, wood, acrylic, Plexiglas, vinyl, and many other materials. Cutting area: 3500 mm x 3200 mm Tools: Electric oscillating tool, tangent knife, creasing tool, kiss-cut tool, powerful rotary tool Camera System AKI System Cutting accuracy: 0.1 mm Power supply: 220 V 50 Hz / 380 V 50 Hz Automatic camera positioning system Disassembly, reassembly, and transport costs are additional. A quote for disassembly, reassembly, and training is available from the manufacturer! If the distance is considerable, an inspection can also be carried out via live video. All information is provided without guarantee. Subject to change, errors and omissions. Tedpsy Tk R Hsfx Af Aoc If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2005, Equipment: documentation/manual, We offer this used DMG MORI SPRINT 20 LINEAR CNC turning and milling center, manufactured in 2005. Tjdpfx Afsz Ehyks Aec Manufacturer: DMG MORI Model: SPRINT 20 LINEAR Year of manufacture: 2005 Condition: Used Machine type: CNC turning and milling center If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Year of construction: 2016, operating hours: 7,500 h, functionality: fully functional, turning length: 760 mm, turning diameter over cross slide: 406 mm, spindle motor power: 18 W, spindle speed (max.): 5,000 rpm, spindle bore: 76 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 830 mm, Equipment: documentation/manual, Automatic measuring arm Chip conveyor Parts collector Set of tool holders, including 2 motorized ones Presetting tools Tedpezzap Ejfx Af Aoc Chip conveyor Parts collector Set of tool holders, including 2 motorized ones

Condition: good (used), Year of construction: 2007, operating hours: 4,262 h, functionality: fully functional, machine/vehicle number: R7AV13, turning diameter: 65 mm, Can be powered up, the condition of the bar feeder is unknown, removed from production due to arrival of a new machine. On both turret heads, the use of a driven tool holder is possible in all positions. Tsdoyxxhqopfx Af Asc

Condition: used, Year of construction: 2008, operating hours: 46,815 h, functionality: fully functional, Disassembly, loading, and transport are the responsibility of the buyer. Maintenance kit for NE-type lathes, consisting of rubber-metal scrapers, plastic scrapers, filter mats, and belts. Not included in the price. Todpfozzvw Sjx Af Aoc Sale only within the EU.

Condition: used, Year of construction: 2013, operating hours: 10,322 h, functionality: fully functional, machine/vehicle number: NL254130510, We are offering this used DMG MORI NLX 2500 SY/700 CNC turning and milling center, manufactured in 2013, complete with a short bar loader magazine ILS-MKU 70/100, manufactured in 2015. Turning diameter max. 366 mm Turning length 705 mm Swinging diameter over bed 920 mm Swinging diameter over cross slide 742 mm Spindle speed range - main spindle 3,500 rpm Drive power - main spindle 18.5 / 15 kW Spindle nose JIS A-8 Spindle bearing diameter 140 mm Spindle bore 90 mm Max. usable bar diameter 80 mm Spindle speed range - counter spindle 6,000 rpm Drive power - counter spindle 11 / 7.5 kW Spindle nose JIS A2-5 Spindle bearing diameter 85 mm Spindle bore 43 mm Max. usable bar diameter (-) mm X-axis travel 260 mm Z-axis travel 795 mm Y-axis travel +/- 50 mm Rapid traverse (X / Y / Z) 30 / 10 / 30 m/min Number of tool positions 12 Tool holder BMT 60 Todpezwvv Tefx Af Aec Spindle speed range - driven tools max. 10,000 rpm Drive power - driven tools 5.5 / 3.7 kW Total power consumption 40 kVA Machine weight approx. 6.4 t Short bar loader magazine ILS-MUK 70/100 Type: MUK 10016-II Year of manufacture: 2015 Material diameter: 6-100 mm Material length: 250-1650 mm Length: 2400 mm Width: 1600 mm Outreach: 330 mm Weight: approx. 680 kg If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 1987, Universal CNC Milling Machine CNC MAHO MH 400 E Travel X: 400 mm Travel Y: 375 mm Travel Z: 250 mm Numerical Command CNC PHILIPS 432 Tjdozy Rrzopfx Af Ajc Table: 700 x 270 mm Cone: SA40 Spindle speed: from 80 to 4000 RPM Year of construction: 1987 Central lubrication Manually swivel head Supplied with doc + machine parameters Voltage: 380 V Width: 2200 mm Depth: 2000 mm Total height: 2000 mm Weight: approx 1,5 T

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 640 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 8,000 rpm, spindle motor power: 16,400 W, number of axes: 3, This 3-axis KNUTH X.mill 640 CNC was manufactured in 2009. It features a total power of 16.4 kW and operates at 400 Volt with a frequency of 50 Hz across 3 phases. The machine is equipped with a new frequency inverter and a new braking resistor. If you are looking to get high-quality machining capabilities, consider the KNUTH X.mill 640 CNC vertical machining centre we have for sale. Contact us for further details. Tsdpfx Aez Ep N Hef Asc - Voltage: 400 Volt- Frequency: 50 Hz / 3 Phases- Frequency Inverter: New- Braking Resistor: New- Manufacturer Error Description: Main spindle motor feels loose or offers resistance when turned manually (possible issue with belt, pulley, or top spindle mechanism). Main spindle motor encoder may require repair (sends positive signals only, negative signals required for proper positioning).

Condition: used, Year of construction: 1991, CNC Vertical Milling Machine RAMBAUDI type RAMMATIC 600 Travel X 1260 mm Travel Y 690 mm Travel Z 600 mm Tedezy Eg Hjpfx Af Aoc Numerical Command NUM 1060 Cone SA 50 Table size 2000 x 600 mm Year of construction 1991 Voltage 380 V Depth 2500 mm Total height 4000 mm Weight: approx 9 T

Condition: excellent (used), Year of construction: 2024, spindle bore: 44 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 300 mm, spindle motor power: 7,500 W, total height: 1,800 mm, total length: 2,500 mm, total width: 1,300 mm, quill diameter: 32 mm, overall weight: 3,500 kg, CNC Lathe with c-axis QuickTech - T6 MILL Tjdpsz H I Haofx Af Ajc MACH-ID 9822 Make: QuickTech Type: T6 MILL Control: Mitsubishi Touch YOP: 2024 Max. turning Ø: 400mm X-Axis: 200mm Z-Axis: 300mm Spindle bore: 44mm Speedrange: 5000Rpm Spindle power: 7.5kW ATC / revolver: 12 Speed live tools:4000Rpm Power live tools:5kW Pinole taper: 4Mk Stroke pinole: 70mm Quill Ø: 32mm Length: 2500mm Width: 1300mm Height: 1800mm Weight: 3500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), CNC Milling Machine, Deckel FP4NC, Used machine Manufacturer: Deckel Model: FP4NC Serial number: 31549 Travel range (per axis): X-axis: 560 mm Y-axis: 500 mm Z-axis: 450 mm Table specifications: Length: 900 mm Width: 530 mm Tsdpowrdu Aofx Af Ajc Max load capacity: 450 kg Feed rates: X-axis: 3600 mm/min Y-axis: 3600 mm/min Z-axis: 3600 mm/min Spindle specifications: Spindle taper: ISO 40 / BT / MK Spindle power: 7.5 kW Max speed: 5000 RPM

Condition: used, Year of construction: 1988, Tool CNC Milling Machine HERMLE type UWF 1000 CNC Year of construction: 1988 Travel X: 700 mm Travel Y: 550 mm Travel Z: 500 mm Numerical Command: HEIDENHAIN TNC 155 Spindle ISO 40 Tsdpfx Ajzy Rrnsf Aoc Spindle: Ø 70 mm Spindle speed: from 25 to 3150 RPM Table size: 1000 x 500 mm Vertical sleeve travel: 100 mm Swivel head Spindle motor: 6,9 kW Weight: 3,3 T Problem on CNC. Machine sold as it is. (Screen from CNC need to be changed)

Condition: good (used), CNC turning and milling center with bar loader, FMB Turbo 3000 Turning diameter over machine bed: 400 mm Turning diameter over cross slide: 225 mm Tjdpfjz Eayisx Af Aec Turning length: 640 mm Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), CNC turning and milling center with bar feeder FMB Turbo 3000 Turning diameter over the machine bed: 280 mm Turning diameter over the cross slide: 185 mm Turning length: 250 mm Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 Tjdpoz Eaxrefx Af Asc DE - 44143 Dortmund - Wambel / Germany