Used Coil Tec for sale (100)

Condition: new, maximum load weight: 29,860 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,850 mm, Year of construction: 2026, Equipment: ABS, D-TEC Slurry Tanker SV 2006 BASIC Specification: * Tank volume: 30m³, Ø2200 mm, wall thickness 3 mm, temperature range 0–60°C * Extended swivel arm * Flush line 4" with 2 gravity discharge points of 2.5" each, one at the front and one in the middle of the tank * Flush line on the left side via tension cables over the hose trays * Automatic pump shut-off. Axle also equipped with anti-spray mudguard * Holder with 2 wheel chocks * Left and right (narrow and tall) hose racks, each 5m, made of galvanized steel (250 mm wide, 190 mm high) Pump: * Vogelsang pump, 6,000 L/min Axles: * 9-ton Valx axles, Ø430 mm disc brakes, ET120 * 1st axle as lift axle * 3rd axle as steering/lazy axle Brakes: * Wabco EBS braking system * TPMS – Wabco Tyre Pressure Monitoring System (compliant with R141) * No electronic air suspension Additional Options: * Third axle as self-steering axle Lift Axle: * Automatic lift function on the first axle, load-dependent activation, or by pressing the brake 3 times * Starting assistance: load transfer to the 2nd and 3rd axles up to 130% below 30 km/h Tyre Size: * 385/65 R22.5 Tyres: * Apollo Lighting: Nkedjyhi Huepfx Ah Rjw * 24-volt lighting system Lighting options: * Flashing side marker lights * Working lights left and right at the first axle * 2x LED working lights at the rear (1x left, 1x right, mounted on the hose racks) Paintwork: * Tank painted in RAL 7030 STONE GREY * Chassis painted in RAL 7016 ANTHRACITE GREY Miscellaneous: * Gravity discharge connection at the rear of the pump; connection with manual valve (6" ball valve) for tank emptying; venting tank made of stainless steel (V2A) * Docking funnel (8") on top at the rear. Pipe leads down to the bottom of the tank with a manual slide valve.

Condition: used, axle configuration: 3 axles, first registration: 11/2010, total length: 9,300 mm, total width: 2,470 mm, suspension: air, tire size: 385/65 R 22.5, wheelbase: 7,510 mm, Year of construction: 2010, Equipment: ABS, = Additional options and accessories = - Lifting axle - Air suspension = Further information = Axle configuration Tyre size: 385/65 R 22.5 Axle brand: SAF Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Tyre tread left: 20%; Tyre tread right: 20% Rear axle 2: Tyre tread left: 20%; Tyre tread right: 20% Rear axle 3: Tyre tread left: 20%; Tyre tread right: 20% Weights Unladen weight: 4,050 kg Payload: 36,950 kg Gross vehicle weight: 41,000 kg Condition Damages: none Identification Registration number: OL-56-FN Njdpfxsyu Tzpj Ah Rokw

Condition: used, Year of construction: 2017, functionality: fully functional, For sale: Fully operational and lightly used belt dryer from New eco-tec. Optionally available with air scrubber and 180m³ silo for dried goods. The plant was in operation until recently and is ready for immediate use. The system spans 2 containers and has a belt length of 24m, rated for 1.5MW thermal output. The belt dryer is entirely made of stainless steel inside the containers. Viewing by appointment. Nodpfxsyr Aiqo Ah Rokw

Year of construction: 2012, condition: excellent (used), machine/vehicle number: M 5046 Typ 101 000 432, Embossing calender for roll to roll (100m/min). sheet material can also be processed, separate insertion tables are included exchange cassette (structure fine linen) The machine is in a very good condition, few operating hours Nkedpfohr Rlysx Ah Rjw machine book / instruction manual

Condition: new, functionality: fully functional, power: 14.6 kW (19.85 HP), gearing type: automatic, fuel type: diesel, fuel consumption per hour: 2 l/h, fuel tank capacity: 20 l, color: orange, overall weight: 2,320 kg, operation weight: 2,200 kg, lifting height: 4,190 mm, drive condition: 100 %, chain condition: 100 %, number of seats: 1, shovel volume: 0.068 m³, suspension: other, Year of construction: 2025, operating hours: 5 h, Equipment: adjustable chassis, cabin, hydraulics, parking heater, rubber tracks, Are you looking for a reliable, modern, and immediately ready-for-use mini excavator in the 2.5-ton class? The LT-25P from Tec-Point GmbH impresses with powerful digging force, high-quality workmanship, and maximum comfort – perfect for construction, landscaping, agriculture, and municipal applications. With its robust steel construction, modern load-sensing hydraulics, and swing boom, this machine is ideal for tight construction sites and powerful enough for demanding earthmoving and foundation work. The fully enclosed cab with heating makes the LT-25P a true year-round professional machine! ⭐ Your advantages at a glance ✅ Professional 2.5-ton class mini excavator for daily use ✅ Swing boom – ideal for working in confined spaces ✅ Stable undercarriage 1,300 / 1,500 mm – maximum stability ✅ Load-sensing hydraulics – precise and energy-saving control ✅ Axial piston pump with high delivery rate ✅ Hydraulic piston travel and swing motors ✅ High digging and breakout forces for demanding jobs ✅ Wear-resistant rubber tracks – durable & robust ⚙️ TECHNICAL DATA Operating weight: approx. 2,200 kg Operating weight with cab: approx. 2,320 kg Engine: Yanmar 3TNV80F | 3-cylinder diesel Power: 14.6 kW / approx. 19.9 hp Max. digging depth: up to 2,410 mm Max. reach: up to 4,520 mm Travel speed: 2.0 – 3.8 km/h Gradeability: 30° ️ COMFORT & FEATURES ✔ Fully enclosed comfort cabin including heating ✔ Ergonomic joystick control Nodpfsx Hg Etjx Ah Rskw ✔ LED work lighting ✔ Comfort seat for long shifts ✔ Dozer blade ✔ Robust rubber tracks ✔ Hydraulic safety valves ✔ Reinforced steel construction for maximum durability INCLUDED IN THE PACKAGE: 3 BUCKETS The delivery includes 3 professional buckets: ✅ 25 cm trench bucket ✅ 50 cm digging bucket ✅ 100 cm grading bucket ➡️ Ready for any job site right away! ➕ OPTIONAL EXTRAS AT EXTRA COST Hydraulic quick coupler ➡️ Note: The quick coupler shown in the pictures is not included in the standard set and can be ordered as an option. Hydraulic tilt quick coupler ➡️ Note: The tilt coupler shown in the pictures is not included in the standard set and can be ordered as an option. Hydraulic auger set up to Ø 300 mm ️ SERVICE & WARRANTY Maintenance every 250 operating hours or annually 12 months Europe-wide warranty Spare parts & service directly from stock in Rheda-Wiedenbrück IMMEDIATELY AVAILABLE + DELIVERY POSSIBLE Machines available now Viewing by appointment possible at any time Europe-wide delivery organized on request PRICE €19,900 net (RRP) Location: Rheda-Wiedenbrück Special offer price possible – contact us for details! Inquire now & secure your advantage! Demand is high – secure your LT-25P today. ➡️ Contact us directly via Machineseeker or call us – we are happy to offer you personal advice!

Condition: used, Year of construction: 2022, Overview  This carbonating unit was manufactured in 2022 by German company KH TEC. The machine is designed for beer carbonation. The unit is stopped, still in production condition, and equipped with HMI and automated operation. It is available immediately and can be visited on request. The machine is being sold as it will be replaced by a new system. Technical data Capacity: 20 HL/hour Application: Beer Configuration: Automated, HMI-controlled   Nsdpfoyk Ab Dex Ah Rjkw

Condition: good (used), machine/vehicle number: XL9DTECFT12103334, axle configuration: 3 axles, first registration: 06/2012, total width: 2,470 mm, suspension: air, color: other, Year of construction: 2012, Equipment: ABS, = Additional options and accessories = - Air Suspension - Disc brakes - Lift Axle = More information = Axle configuration Make axles: Mercedes Nedpfeyud I Tjx Ah Rskw Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 5.283 kg Carrying capacity: 37.717 kg GVW: 43.000 kg Maintenance, history and condition APK (MOT): tested until 06/2026 Technical condition: very good Visual appearance: good Identification Registration number: OL-86-SB

Condition: used, first registration: 02/2016, Equipment: ABS, 3-axle swap body semi-trailer, make: DTec Flexitrailer up to 45ft, first registration: 02/2016, lift axle, central and rear extension, and much more. Price: €12,500 plus VAT (19%) Nkodpfx Ahoytltbj Rjw Errors and prior sale excepted.

Condition: used, axle configuration: 3 axles, first registration: 06/2008, total length: 9,480 mm, total width: 2,470 mm, suspension: air, tire size: 385/65 R 22.5, wheelbase: 7,330 mm, Year of construction: 2008, Equipment: ABS, = Additional options and equipment = - Air suspension = Further information = Axle configuration Nkedpfx Aoyt Exkoh Row Tyre size: 385/65 R 22.5 Axle brand: SAF Brakes: Drum brakes Suspension: Air suspension Rear axle 1: tread left: 25%; tread right: 25% Rear axle 2: tread left: 25%; tread right: 25% Rear axle 3: tread left: 25%; tread right: 25% Weights Unladen weight: 5,300 kg Payload: 37,700 kg Gross vehicle weight: 43,000 kg Condition Damages: none Identification Registration number: OK-95-KH

Condition: used, axle configuration: 3 axles, first registration: 05/2005, total length: 9,480 mm, total width: 2,470 mm, suspension: air, tire size: 385/65 R 22.5, wheelbase: 7,330 mm, Year of construction: 2005, Equipment: ABS, = Additional options and accessories = - Lift axle - Air suspension Nksdpjyt Ew Hofx Ah Rsw - Disc brakes = Further information = Axle configuration Tyre size: 385/65 R 22.5 Axle brand: ROR Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Tyre tread left: 20%; right: 20% Rear axle 2: Tyre tread left: 35%; right: 35% Rear axle 3: Tyre tread left: 40%; right: 40% Weights Unladen weight: 5,300 kg Payload: 37,700 kg Gross vehicle weight: 43,000 kg Condition Damage: none Identification Registration number: OH-88-XH

Condition: used, axle configuration: 3 axles, first registration: 05/2008, total length: 9,480 mm, total width: 2,470 mm, suspension: air, tire size: 385/65 R 22.5, wheelbase: 7,330 mm, Year of construction: 2008, Equipment: ABS, = Additional options and accessories = - Air suspension = Further information = Axle configuration Tyre size: 385/65 R 22.5 Axle brand: SAF Brakes: drum brakes Suspension: air suspension Rear axle 1: tyre tread left: 35%; tyre tread right: 35% Rear axle 2: tyre tread left: 35%; tyre tread right: 35% Rear axle 3: tyre tread left: 35%; tyre tread right: 35% Nedpfx Asyt Ewteh Rskw Weights Unladen weight: 5,300 kg Payload: 37,700 kg Gross vehicle weight: 43,000 kg Condition Damages: none Identification Registration number: OK-97-KH

Condition: used, axle configuration: 2 axles, first registration: 10/2010, loading space length: 10,300 mm, loading space width: 2,500 mm, loading space height: 2,590 mm, total length: 11,100 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 385/55R22,5, wheelbase: 6,720 mm, color: other, Year of construction: 2010, Equipment: ABS, tail-lift, = Additional Options and Accessories = - EBS - Tail lift = Notes = Number of axles: 2, Payload: 24,180 kg, Unladen weight: 8,820 kg, Gross weight: 33,000 kg, Kingpin size: 2 inch, Suspension type: Full air, ABS, EBS, Body year: 2010, Side wall material: insulated, Refrigeration unit manufacturer: Thermoking, Model: SLX Whisper, Cooling unit: Diesel/electric, Electrical unit hours: 1, Diesel unit hours: 3,893, Wall thickness: 45 mm, Type of cooling: Chilling and freezing, Axle type: BPW, Tail lift, Tail lift design: rear liftgate, Tail lift capacity: 3,000 kg, Tail lift manufacturer: Dhollandia, Tail lift material: steel, Tail lift size: 250x200, Battery for access ramp = Further Information = General Information Cab: Day cab Registration number: OL-66-DV Drivetrain Fuel type: Diesel Transmission Transmission: Manual Axle configuration Tyre size: 385/55R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Lifting axle; Tyre tread left: 4 mm; Tyre tread right: 4 mm Axle 2: Tyre tread left: 6 mm; Tyre tread right: 6 mm Weights Unladen weight: 8,820 kg Payload: 24,180 kg Gross Vehicle Weight: 33,000 kg Functional Tail lift: Dhollandia, rear liftgate, 3,000 kg Refrigeration unit: Diesel and electric (3,893 hours diesel; 1 hour electric) Wall thickness: 45 mm Environment Emission class: Euro 0 Condition General condition: average Technical condition: average Visual condition: average Damages: none = Company Information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our inventory includes all European brands, model years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, fast-changing stock • Recognizable quality • Good prices Nedpfew Da Ayex Ah Rekw • Honest business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Expert technical services • The assurance of "recognizable quality" • And much more... Please visit our website for special offers and the complete stock list: Leasing through Kleyn Trucks is available in most European countries! Quickly calculate your lease rate and send a request via our website. Ask directly about our European warranty package.

Condition: used, axle configuration: 2 axles, first registration: 10/2010, suspension: air, tire size: 385/55R22,5, wheelbase: 11,280 mm, color: other, Year of construction: 2010, Equipment: ABS, = Additional Options and Accessories = - EBS = Remarks = Number of axles: 2, Payload: 30,320 kg, Unladen weight: 11,680 kg, Gross weight: 42,000 kg, Suspension type: Full air, ABS, EBS, Year of body construction: 2010, Axle type: BPW = Further Information = General Information Cab: Day Registration number: OL-69-DV Drivetrain Fuel type: Diesel Transmission Gearbox: Manual transmission Axle Configuration Tyre size: 385/55R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Tyre tread left: 4 mm; Tyre tread right: 5 mm Axle 2: Steered; Tyre tread left: 4 mm; Tyre tread right: 4 mm Weights Unladen weight: 11,680 kg Payload: 30,320 kg Njdpfxjw Da A Hs Ah Rekw Gross vehicle weight (GVW): 42,000 kg Environment Emission class: Euro 0 Condition Overall condition: Fair Technical condition: Fair Optical condition: Fair Damage: None = Company Information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our offer includes all European makes, model years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, fast-changing inventory • Reliable, recognizable quality • Competitive prices • Trustworthy business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration plates arranged promptly • Expert technical services • The security of ‘recognizable quality’ • And more.... Please visit our website for special offers and a complete stock list. Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send us an inquiry via our website. Ask directly about our European warranty package.

Condition: new, maximum load weight: 31,330 kg, overall weight: 36,000 kg, axle configuration: 3 axles, total width: 2,470 mm, total height: 1,280 mm, Year of construction: 2026, Equipment: ABS, FT-LS-S-ECO D-TEC FLEXITRAILER FT-LS-S * 3-axle multi-container chassis, suitable for 45 ft containers, length >16.5 m (2 wheelbases) * 40 ft (2 wheelbases), 30 ft, 2x 20 ft and 20 ft flush with the rear * 9-ton Valx axles with disc brakes Ø 430 mm * Rims ET 120 * Automatic lift axle on the first axle, * Operable via a switch on the chassis, or by actuating the service brake three times * With traction support, load increase on the 2nd and 3rd axle up to 130% below 30 km/h Nkodpeyq Ufusfx Ah Row * Lifting / lowering controlled by the EBS modulator * Tyre size 385/55 R22.5 * Fifth wheel height: 1100 mm * Branded tyres as per manufacturer’s choice, with tyre pressure monitoring system * Wheel chocks * Removable hot-dip galvanized container guides at the front * Upper side of the frame spray galvanized * Paintwork: 1 coat, 2K RAL 9005, matte * 15-pin connector * Flashing side marker lamps * Multichamber rear lights

Condition: new, maximum load weight: 31,330 kg, overall weight: 36,000 kg, axle configuration: 3 axles, total width: 2,470 mm, total height: 1,280 mm, Year of construction: 2026, Equipment: ABS, FT-LS-S-ECO D-TEC FLEXITRAILER FT-LS-S * 3-axle multi-container chassis, suitable for 45 ft containers (overall length >16.5m, 2 wheelbases) * Compatible with 40 ft (2 wheelbases), 30 ft, 2 x 20 ft, and 20 ft rear-flush containers * 9-ton Valx axles with Ø 430 mm disc brakes * ET 120 offset rims * Automatic lift axle on the first axle, operable via a switch on the chassis or by pressing the service brake three times * Start assist: Axle load distribution to the 2nd and 3rd axles up to 130% below 30 km/h * Lifting/lowering controlled by EBS modulator * Tire size: 385/55 R22.5 * Fifth wheel height: 1,100 mm * Branded tires as per manufacturer's choice, with tire pressure monitoring system * Wheel chocks * Removable hot-dip galvanized front container guides * Upper frame surface hot-dip zinc sprayed * Coating: 1-coat 2K RAL 9005, matt * 15-pin connector * Flashing side marker lights * Multi-compartment tail lights Njdpfjyq Ufzex Ah Rskw

Condition: new, maximum load weight: 31,330 kg, overall weight: 36,000 kg, axle configuration: 3 axles, total width: 2,470 mm, total height: 1,280 mm, Year of construction: 2026, Equipment: ABS, FT-LS-S-ECO D-TEC FLEXITRAILER FT-LS-S * 3-axle multi-container chassis, suitable for 45 ft containers, length >16.5 m (2 wheelbases) * 40 ft (2 wheelbases), 30 ft, 2x 20 ft and 20 ft flush with rear * 9-tonne Valx axles with disc brakes Ø 430 mm * Rims offset ET 120 * Automatic lift axle on the first axle * Operable via a switch on the chassis or by pressing the service brake three times * With traction aid, load on 2nd and 3rd axle up to 130% under 30 km/h * Raise/lower via EBS modulator control * Tyre size 385/55 R22.5 * Fifth wheel height: 1100 mm * Branded tyres at manufacturer’s discretion, tyre pressure monitoring system * Wheel chocks * Removable hot-dip galvanized front container guides * Frame top edge hot-dip galvanized * Paint: 1 layer, 2K RAL 9005, matt * 15-pin connector Nsdpfx Ahoyq Ufne Rekw * Flashing side marker lights * Multi-chamber tail lights

Condition: new, functionality: fully functional, power: 4.8 kW (6.53 HP), fuel type: gasoline, overall weight: 550 kg, maximum load weight: 500 kg, lifting height: 1,020 mm, chain condition: 100 %, Year of construction: 2025, Equipment: hydraulics, rubber tracks, tilting carriage, The HT500Y-4 Mini Crawler Dumper is ideal for construction, landscaping, agriculture, and operations in confined spaces. Equipped with rubber tracks, a hydraulic tipper, and a powerful lifting function, this dumper offers excellent off-road capability, stability, and easy operation. The machine stands out for its compact design, high payload capacity, and reliable Briggs & Stratton petrol engine. ⚙️ Technical Specifications Engine & Drive: - Engine: Briggs & Stratton - Engine type: 1-cylinder, OHV, 4-stroke, air-cooled - Displacement: 203 cc - Power: 6.5 HP at 3600 rpm - Fuel: Petrol - Tank capacity: 3.6 liters Performance & Capacity: - Maximum payload: 500 kg - Unladen weight: 550 kg - Skip capacity: 200 dm³ - Tipping angle: 100° - Tipping system: Hydraulic Dimensions: - Machine dimensions (without pedal & skip): 1570 × 880 × 1450 mm - Machine dimensions (with foot pedal & skip): 2050 × 880 × 1450 mm - Skip dimensions: 1050 × 730 × 730 mm - Undercarriage width: 700 mm Lifting & Height: - Maximum lift height: 1020 mm - Maximum dumping height: 970 mm - Tipping clearance: 220 mm - Ground clearance: 110 mm Nksdpeyqxw Iefx Ah Rew Undercarriage: - Track width: 180 mm - Track ground contact length: 1000 mm - Track gauge: 520 mm - Turning radius: 1150 mm - Speed: 2.88 km/h - Gradeability: 20° - Rubber tracks for optimal ground traction ✅ Features & Benefits: ✔ Removable protective container ✔ Simple control via operating lever ✔ Folding stand-on platform for flexible use ✔ Very compact – ideal for tight job sites ✔ High stability thanks to tracked undercarriage ✔ Low-maintenance petrol engine Applications: - Construction & renovation - Landscaping - Agriculture - Stable & yard work - Material handling in challenging terrain Condition & Delivery: - New/unused, current production - Factory tested, ready for immediate use - Supplied with full standard equipment - Available from the second half of January - Europe-wide delivery by freight carrier available - Multiple units available upon request NET PRICE: €3,800 (RRP) Location: Rheda-Wiedenbrück Viewing by appointment possible Save now – better price possible! Take advantage of our attractive offers. Enquiries welcome!

Condition: new, functionality: fully functional, gearing type: automatic, fuel type: diesel, operation weight: 2,000 kg, drive condition: 100 %, chain condition: 100 %, number of seats: 1, shovel volume: 0.025 m³, Year of construction: 2025, operating hours: 5 h, Equipment: adjustable chassis, cabin, hydraulics, parking heater, rubber tracks, NOW ONLY €13,500 NET – FOR A LIMITED TIME ONLY! 💥 ATTENTION! LIMITED OFFER FOR QUICK DECISION-MAKERS 💥 Are you looking for a compact, powerful, and immediately ready-to-use mini excavator? The HT20 PRO is the perfect choice for professionals who demand performance, comfort, and reliability. ⭐ YOUR ADVANTAGES ✔ Genuine Kubota D902 engine – durable, economical, reliable ✔ Precision load-sensing hydraulics ✔ Comfortable cab with air conditioning & heating ✔ Adjustable undercarriage – ideal for tight job sites ✔ Heavy-duty steel construction – built for daily use ⚠️ PROMOTIONAL VERSION – INCLUDED FEATURES 👉 Price includes: ✅ 1 bucket (standard digging bucket) – ready for immediate use ➕ ACCESSORIES & OPTIONS (AT EXTRA CHARGE) Customize your machine: ✔ Additional buckets ✔ Hydraulic quick coupler ✔ Earth auger (up to Ø 300 mm) ✔ Other attachments on request 👉 You decide – pay only for what you actually need ⚙️ TECHNICAL SPECIFICATIONS Kubota D902 diesel engine 3-cylinder Power: 11.8 kW Operating weight: 2,000 kg Transport weight: 1,700 kg Transport length: 2,850 mm Width: 1,220 mm Height: 2,350 mm Maximum digging depth: 2,060 mm Maximum reach: 3,130 mm Maximum dumping height: 2,875 mm 🚀 IMMEDIATELY AVAILABLE ✔ Machine in stock ✔ Ready for operation upon delivery Nodpfx Aox Hvvhsh Rskw ✔ Europe-wide delivery possible ✔ Spare parts & service available locally ✔ 12-month warranty 🔥 WHY THIS OFFER? ➡️ Premium machine at an unbeatable price ➡️ Maximum flexibility in configuration ➡️ No unnecessary extras – complete cost control ⏳ ACT NOW – WHILE STOCKS LAST 💰 Special price: €13,500 net 📍 Location: Rheda-Wiedenbrück 👉 Inquire now and secure your unit – before this offer ends!

Condition: used, Year of construction: 2025, operating hours: 200 h, functionality: fully functional, MACHINE DATA Year of manufacture: 2025 Nkjdsyubklepfx Ah Rsw Operating hours:

Condition: new, functionality: fully functional, - Dimensions • Length: 3.4 metres (11’ 1’’) • Width: 2 metres (6’ 6.75’’) • Height: 2.4 metres (7’ 10.5’’) - Operating weight: 6,740 kg - Engine: Cummins B4.5 T4F/STG V, 115 kW (155 HP) - Transmission: Hydrostatic drive Nkedoyubi Ijpfx Ah Rjw - Fuel tank: 160 litres (42 gallons)

Condition: excellent (used), Continuous mixer M-tec D 10 Drive power 2,2 kW Mixer capacity approx. 20 l/min Nksdpfx Aoirfp Ijh Rjw 14 pieces available Very good ready to use condition, directly from production!!!

Condition: like new (used), Year of construction: 2019, Used belt dryer New eco tec Model Woody 500-100-1.0 SP Produced in 2019. Nsdpjvrd Uqofx Ah Rokw Like new.

Condition: new, functionality: fully functional, power: 14 kW (19.03 HP), gearing type: automatic, fuel type: diesel, color: orange, operation weight: 2,500 kg, drive condition: 100 %, chain condition: 100 %, number of seats: 1, shovel volume: 0.07 m³, Year of construction: 2025, operating hours: 5 h, Equipment: air conditioning, cabin, hydraulics, parking heater, quick-change device, steel tracks, Immediately available – Get in & start working right away! ➡️ HT25 PRO on STEEL TRACKS For professionals who make no compromises. The HT25 PRO is a no-compromise professional mini excavator on robust STEEL TRACKS, built for the toughest jobs on construction sites, in civil engineering, and for municipal work. No rubber tracks. No compromises. The standard steel tracks guarantee maximum traction, superior stability, and extreme durability – even on gravel, concrete, demolition sites, and uneven terrain. STEEL TRACKS – The key professional advantage ✔ Genuine steel tracks / steel crawlers as standard ✔ Significantly longer lifespan than rubber tracks ✔ Maximum ground grip for heavy-duty operations ✔ High stability for side work & lifting ✔ Ideal for continuous operation, demolition, civil engineering & municipal applications ➡ Built for professionals who need performance every day. ➡ On request, we also offer rubber pads / rubber track pads for the steel tracks. Perfect for protecting sensitive surfaces such as paving, asphalt, or concrete – without sacrificing the advantages of steel tracks. ⭐ PERFORMANCE THAT SUITS THE TRACKS: Kubota D1105 – Original professional engine 14 kW rated power up to 18.4 kW peak power Low-vibration & fuel-efficient Industrial-grade load-sensing hydraulics 61.6 l/min flow rate up to 25 MPa pump pressure Precise control, even with heavy attachments ⭐ STABILITY FROM THE GROUND UP: High-strength manganese steel construction STEEL TRACK undercarriage with high torsional rigidity Telescopic undercarriage Heavy-duty cast iron counterweight Safe operation even at full reach ⭐ PREMIUM CABIN FOR LONG WORKING DAYS: ✔ Enclosed comfort cabin ✔ Heating & air conditioning standard ✔ Excellent all-round visibility ✔ Ergonomic joystick controls ✔ LED work lighting ✔ Comfort seat ⭐ WORKING RANGE: Side-swing boom Digging depth up to 2,370 mm Dump height up to 3,500 mm ✔ INCLUDED ✔ 50 cm digging bucket (with removable teeth) ➕ OPTIONAL FOR AN ADDITIONAL PRICE ✔ Hydraulic quick coupler (The hydraulic quick coupler shown in the pictures is not included as standard and is available separately) Nodpfx Aox Hhu Noh Rjkw ✔ 20 cm trenching bucket ✔ 25 cm digging bucket (with removable teeth) ✔ 25 cm cable bucket ✔ 100 cm grading bucket ✔ Hydraulic auger set up to Ø 300 mm (150 / 200 / 300 mm + extensions) and many, many more attachments. SERVICE & SAFETY Maintenance every 250 h / annually 12-month Europe-wide warranty Spare parts & service from German stock CE-certified to EU standards ⭐ SPECIAL NET PRICE: €19,990 ⭐ Rheda-Wiedenbrück Europe-wide delivery available Immediately available! Attractive terms available – inquiries are worthwhile.

Condition: new, functionality: fully functional, power: 11.8 kW (16.04 HP), gearing type: automatic, fuel type: diesel, fuel consumption per hour: 1.5 l/h, fuel tank capacity: 19 l, color: orange, overall weight: 1,800 kg, operation weight: 1,800 kg, lifting height: 3,570 mm, drive condition: 100 %, chain condition: 100 %, number of seats: 1, shovel volume: 0.04 m³, digging bucket width: 485 mm, Year of construction: 2025, operating hours: 5 h, Equipment: adjustable chassis, cabin, hydraulics, parking heater, rubber tracks, Immediately available – Hop in & get started! Are you looking for a reliable, modern, and ready-to-use mini excavator in the 2.0-ton class? The LT-20 PRO from Tec-Point GmbH impresses with powerful performance, high-quality construction, and maximum comfort – perfect for construction, landscaping, and municipal tasks. Thanks to its compact design and modern load-sensing hydraulics, this machine is ideal for tight construction sites yet powerful enough for demanding earthworks and foundation projects. The enclosed, heated cabin makes the LT-20 PRO a truly professional all-year-round machine! ⭐ Your Benefits at a Glance ✅ Side-swing boom (boom swing) – ideal for working in confined spaces ✅ Telescopic undercarriage 990–1,300 mm – maximum stability ✅ Load-sensing hydraulics – precise & energy-efficient control ✅ Axial piston pump with variable flow rate ✅ Travel motors with high-/low-speed modes ✅ Double cast counterweights – increased stability ✅ Rugged 230 mm rubber tracks – durable & wear-resistant ⚙️ TECHNICAL SPECIFICATIONS Operating weight: approx. 1,800 kg Engine: Kubota D902 | 3-cylinder diesel Power: 11.8 kW / 16.1 HP Digging depth: up to 2,270 mm Digging reach: up to 3,910 mm Travel speed: 2.2 / 4.5 km/h Gradeability: 30° ️ COMFORT & FEATURES ✔ Enclosed comfort cabin including heating ✔ Ergonomic joystick control ✔ LED work lights ✔ Comfort seat for long shifts ✔ Dozer blade ✔ Hydraulic safety valves ✔ Reinforced steel construction for maximum load capacity INCLUDED IN THE SET: 3 BUCKETS The package includes 3 professional buckets: ✅ 25 cm trenching bucket ✅ 50 cm digging bucket ✅ 100 cm grading bucket ➡️ Ready for any job site immediately! Nsdex Hg D Aspfx Ah Rokw ➕ OPTIONAL AT EXTRA COST Hydraulic quick coupler ➡️ Note: The quick coupler shown in the images is not included in the standard package and can be ordered as an option. Hydraulic tilt quick coupler (tilting function) ➡️ Note: The tilt quick coupler shown in the images is not included in the standard package and can be ordered as an option. Hydraulic auger set up to Ø 300 mm ️ SERVICE & WARRANTY Maintenance every 250 operating hours or annually 12 months warranty Europe-wide Spare parts & service directly from our Rheda-Wiedenbrück warehouse IMMEDIATELY AVAILABLE + DELIVERY POSSIBLE Europe-wide delivery can be arranged on request Location: Rheda-Wiedenbrück Our machines are available and ready to work immediately. You are welcome to inspect and test all our machines on-site. PROMOTIONAL PRICE €17,800 net (RRP) Special price possible – contact us today! Request your quote & secure your advantage! Demand is high – reserve your LT-20 PRO now. ➡️ Contact us directly via Machineseeker or give us a call – we are happy to advise you personally!

Condition: new, functionality: fully functional, power: 4 kW (5.44 HP), fuel type: diesel, overall weight: 550 kg, maximum load weight: 500 kg, chain condition: 100 %, Year of construction: 2025, Equipment: hydraulics, rubber tracks, Crawler Dumper 500S The professional lift dumper for maximum efficiency on the construction site Nkedpfx Ahsyml D Hs Row The Crawler Dumper 500S delivers powerful material transport, precise dumping, and reliable technology. Its hydraulic lifting function up to 1,200 mm makes it the ideal solution for direct unloading into containers, trailers, or elevated loading areas—efficient, safe, and time-saving. Thanks to its compact dimensions, high payload, and robust construction, the Crawler Dumper 500S is perfect for confined construction sites, rough terrain, and demanding continuous use. Your Advantages: - Hydraulic lifting and tipping function (90°) for convenient unloading - Lifting height up to 1,200 mm—ideal for containers and trailers - Powerful Koop 173 diesel engine (4.0 kW, EU Stage V) - High payload of 500 kg with compact external dimensions - Optimum traction thanks to wide crawler undercarriage - Durable, low-maintenance design - Ideal for construction, landscaping, municipalities, and agriculture Technical Data: Engine: Koop 173 diesel engine Power: 4.0 kW Emission standard: EU Stage V Performance & Capacity: Net weight: 550 kg Payload: 500 kg Skip volume: 200 dm³ Skip dimensions: 1,050 × 730 × 730 mm Lifting & Tipping Function: Max. lift height: up to 1,200 mm Tip height: 1,050 mm Tip reach: 220 mm Tip angle: 90° Operation: hydraulic Chassis: Chassis type: crawler undercarriage Track width: 180 mm Ground contact length: 1,000 mm Ground clearance: 110 mm Track gauge: 520 mm Performance: Travel speed: up to 4 km/h Climbing ability: up to 20° Minimum turning radius: 1,150 mm Dimensions: Overall dimensions (L × W × H): 1,570 × 880 × 1,450 mm Undercarriage width: 700 mm The Crawler Dumper 500S excels wherever reliability, maneuverability, and lifting capacity are required: - Civil engineering and construction - Landscaping and horticulture - Municipal services - Agriculture - Material handling in confined spaces Net price: €3,800 (RRP) Location: Rheda-Wiedenbrück Viewing by appointment possible Save now—better prices available! Take advantage of our attractive offers. Enquiries worth your while!