Used Compounding Extruder for sale (544)

Condition: new, Year of construction: 2025, functionality: fully functional, Der Getreideextruder EGK-60 wurde entwickelt, um die Qualität des Futters zu verbessern, hochwertiges Futter zu erhalten, um das Wachstum der Tiere deutlich zu verbessern und die Menge der produzierten Milch zu erhöhen.

Der Extruder verwandelt Getreide in eine schaumige Masse in Form von kleinen Stäbchen oder Flocken. Die Antinährstoffe in den Hülsenfrüchten werden deaktiviert. Unter dem Einfluss hoher Temperaturen findet eine Desinfektion des Futters statt, die schädliche Mikroflora, Pilze und krankheitserregende Bakterien abtötet, für die junge Tiere und Küken besonders empfindlich sind.

Außerdem werden unter Druck und Hitze die für den Verdauungstrakt schwer verdaulichen Stärkebestandteile in leichtere und einfache Kohlenhydrate und Zucker aufgespalten. Vitamine und alle anderen Nährstoffe bleiben erhalten, da die Wirkung der Temperatur nur von kurzer Dauer ist und im Bruchteil einer Sekunde eintritt. Dadurch verlieren die Tiere nicht ihre Kraft bei der Verdauung des Futters, sondern setzen ihre gesamte Energie und Kraft für die Steigerung ihres Körpergewichts und der Milchproduktion ein. Die Verdaulichkeit des Futters durch die tierischen Organismen liegt bei 90 %.

Das fertige Produkt eignet sich hervorragend für den Transport und die Lagerung, da es sich nicht auflöst oder bröckelt.

Länge: 750.0(mm) Breite: 800.0(mm) Höhe: 500.0(mm) Gewicht: 80.0(kg) Warenart: Futtermittelextruder / Extruder Anwendung: Zur Futtermittelextrusion Antriebsart: Elektrisch Leistung: bis zu 60.0(kg/h) Motorleistung:
7,5 kW Spannung:
400 V Drehzahl: 1500 (U/min) Tankinhalt:
3L Rohmaterial für die Verarbeitung:
Getreide (ölfreies Getreide | Feuchtigkeitsgehalt 15-25 %) Gewonnenes Erzeugnis: Stangen mit einem Durchmesser von 10 mm und einer Länge von 10 mm Kdodpfxswk Ipne Aayjk

Year of construction: 2020, condition: new, functionality: fully functional, Single Screw Extruder Screw diameter: 25mm / 25 LD Motor 2,2 kW Die Head available Kjdpfsfw Rigsx Aayjdk Feeding system available waterbath and pelletizer available Visit and Trial possible.

Condition: new, functionality: fully functional, Unused single-screw extruder / recycling extruder - Screw diameter: 140mm - Drive: Siemens motor 95 kW - Volumetric K-Tron dosing - Degassing zone - K-SWE 180 double piston screen changer / filter - strand nozzle - Control system Optionally with strand pelletizer, water bath etc. Inspection possible by arrangement Kdjdpfxeqy E Evj Aayek

Year of construction: 2003, condition: good (used), functionality: fully functional, screw diameter: 27 mm, TECHNICAL DETAILS Capacity: 10 – 40 kg/h Screw and Barrel Technology Design: Synchronous Screw center distance: 23 mm Screw diameter: 2 × Ø27.0 mm Kneading disc and kneading block diameter: 27.0 mm Screw material: 1.2379 Cylinder diameter: 27.2 H8 Cylinder material: 1.8550 nitrided, nitriding layer 0.5–0.6 mm Screw length: 40 D Screw torque: 2 × 100 Nm Screw speed: max. 500 rpm Drive Drive type: DC shunt motor Drive power: 10.5 kW Motor speed: max. 2,690 rpm Gear ratio: i = 5.38 Power transmission: Clutch Ksdpfxjv U Da So Aaysdk Heating and cooling system Number of heating zones: 11 Heating capacity: 9.85 kW Number of cooling zones: 9 Cooling type: ZIK (Intensive Cylinder Cooling) Filling zone cooling: Water Filling zone cooling water consumption: 30 l/h Process parameters Melt pressure: max. 300 bar Melt temperature: max. 350 °C Injection height: 1,050 mm Dimensions and weight Weight: approx. 950 kg Length: 2,630 mm EQUIPMENT - Segmented screws and barrels - Synchronized technology - Degassing

Year of construction: 2013, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 20910-01, Unused Hosokawa Bepex model BX 150 stainless steel (AISI 316) basket extruder for low pressure extrusion. Products with loose structure, large surface and good forming properties are produced with this machine. The product consists of a paste of low flow characteristics and low moisture content. The product to be processed is transported by the inlet into the machine. In the product area are two rotors which works in oposite directions to each other. - The upper 2-arm rotor with angle rotor and additional stirrers mixes and conveys the material down. Rotor is driven through gearbox by 0.55 kW, 60 Hz electrical motor, adjustable speed from approx. 14 - 139 rpm. Kdjdpfx Aast Tvx Toyek - The lower 3-arms rotor is equipped with curved arms and rotor knives. Through the lower 3-arm rotor the product is compressed and forced through a cylindrical screen basket. The diameter of the granules results from the perforation diameter in the screen basket. Rotor is driven through gearbox by 3.0 kW, 60 Hz electrical motor, adjustable speed from approx. 15 - 144 rpm. Includes (2) extrusion screens 2 mm dia x 1.2 mm thick, switchboard with integrated control panel. Mounted on stainless steel frame with (4) wheels.

Year of construction: 1989, condition: good (used), Extruder ZSK 58/32 D Year: 1989 Stainless steel cooling tank Sheer dryer Sheer granulator Kdsdpfoxzfdbex Aayok

Year of construction: 1993, operating hours: 2,466 h, condition: good (used), machine/vehicle number: 330,2135,01, Brand: Leistritz AG Model: Micro 27/40 D Kdsdpsu Aqdkjfx Aayok Type screw: Double screw Year of construction: 1993 Screw Ø: 27 mm L/D Ratio: 40 Working hours: 2.466

Year of construction: 2021, operating hours: 220 h, condition: like new (used), functionality: fully functional, machine/vehicle number: B144, HIGH MOISTURE EXTRUSION (HME) Extruder HME is able to create structured, palatable and nutritious products. Possible industries: - Plant-based Food (Clean label products with great texture) - Pet Food Industry (Wet Pet Food Production, Functional treats and chews, Alternative Protein incorporation) - Aquaculture Feed Industry (Structured aquafeeds, Nutrient Enhancement) - Nutritional supplement and medical foods (High-Protein Supplements) - Snack and convenience foods (High-Protein snacks, Meat-Free Meal Kits) - Sustainable and Alternative Protein Products (Insect and Algae Protein Texturization, Upcycled Food Products) The package includes: • High-quality Clextral HME Extruder • Additional equipment enabling faster start of production Kodpfx Aox Ac Uteayedk Reason for sale: We tried with the project in Plant-based industry in Slovenia and stopped the project in Jan. 2025. Machine was bought at the end of 2021, started operating in H1 of 2022 and worked for only 220 hours. Attached you can find a document with key information about the machine and additional equipment. The machine is in excellent condition ("like new"), used for only 220 hours and meticulously maintained – guaranteeing flawless operation and immediate usability after installation. A catalogue of plant-based products we have manufactured is also included. If you are interested in HME extrusion, we invite you to explore the technical documentation, photos, and VIDEO content available upon request.

Year of construction: 1997, operating hours: 58,668 h, condition: good (used), This WEBER extruder is in machine storage at Plastima Used Machinery. The machine is from 1997 and is in great condition. Make: Hans Weber GmbH Model: NE 7 042 Screw type: single screw Year of construction: 1997 Kdodpfetpg Dnjx Aayek Propeller Ø: 75mm Working hours: 58,668

Year of construction: 1997, operating hours: 76,200 h, condition: good (used), This WEBER extruder is in machine storage at Plastima Used Machinery. The machine is from 1997 and is in great condition. Make: Hans Weber GmbH Model: NE 7 048 Screw type: single screw Kodjtpg D Ujpfx Aaysdk Year of construction: 1997 Propeller Ø: 75mm Working hours: 76,200

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 133846, LDPE extruder, head diameter 150 and 200 mm, screw diameter 55 mm, width up to 1200 mm, 30-180 micron, single winding Kjdjxdknqspfx Aayedk

Year of construction: 2006, condition: good (used), Designed for COEX- castfoil production with additional coating unit. The extrusion part of the line has 2 extruders; the coating unit has 1 extruder. Processing of thermo plastics in a temperature range of 90-300°C. Different combinations of production are possible: - main unit (CoEx) with coating 
 - main extruder (CoEx) without coating 
 - coating processing over winding unit on an existing base film 
 Kdsdpfjpaiaiox Aayok For production in the different described combinations you can lock the not necessary equipment parts. 
 POSSIBLE LAYER STRUCTURES: Main extruder: - Mono film if necessary with tensilized film 
 - 3- layer film (A-B-A) if necessary with tensilized film 
Coating unit: 
 - mono film on excisting base film if necessary with second tensilized film Unwind diameter: max. 1.000 mm Allowed roll/bobbin weight: max1.500kg

Condition: like new (used), Stainless 8Kg hopper with agitator and stainless screw, variable speed, variety of extrusion plates for different style pastas, mobile Ksdpfxjd R D Tle Aayodk

Year of construction: 1993, operating hours: 281 h, condition: used, functionality: unexamined, Extrudex single-screw extruder ED-N45-25D, year 1993, condition used (completely overhauled in 2014) Type: ED-N-45-25D Rated voltage: 3x400V 50Hz Control voltage: 230V 50Hz / 24VDC max. main fuse 200A Drive motor Year: 2004 Type: EFG EF132 M Kdodjxw Tumepfx Aayjk Optionally included: - Belt haul-off - Calibration table For further information, please inquire. Price on request.

Year of construction: 2006, operating hours: 15,000 h, condition: good (used), For sale is an Erema 1007T. Year of manufacture: 2006 Operating hours: 15,420 Throughput: 250-350 kg/h Ksdpfjumubyjx Aaysdk Currently, the system is used to process HDPE, but it is also suitable for other plastics such as LDPE. The system can be viewed during operation. A new extruder screw was installed in February.

Year of construction: 1999, condition: used, Seocnd hand Entex Extruder PL- WE 100 complete with electrical cabinet. Wa in operation for Powder Coatings. Kdodpfsbqt Arjx Aayjk For sell is also a Entex Extruder PL WE 70 ( Laboratory ). Photos on request.

Condition: used, Used Buss extruder PLK 100 for sale. The extruder was used in the powder coatings sector. The extruder is fully functional Kdsdpfx Aasvfd Uqjyek

Year of construction: 2000, condition: ready for operation (used), SINGLE SCREW EXTRUDER GRAEWE-FANGLI 60X33 Application: PE PIPES or PP PIPES Typ: 60 X 33 Screw diameter:60 Drive: 75 KW Output capacity PE: approx. 200 - 250 kg/h Condition: Good, ready to use The extruder is my property Sachal Extrusionmachines Bahnhofstrasse 6 Kdjdpfx Aaeifgwhoyok D-26345 Bockhorn/Grabstede Germany

Year of construction: 2011, condition: excellent (used), SINGLE SCREW EXTRUDER GRAEWE-FANGLI 90X33 Typ: SJ90X33 A6 Application: PE PIPES or PP PIPES Screw diameter: 90 Drive: 160 KW Output capacity PE: approx. 400 - 450 kg/h Kdjdpfx Aajifgwljyek Condition: Good, ready to use The extruder is my property Sachal Extrusionmachines Bahnhofstrasse 6 D-26345 Bockhorn/Grabstede Germany

Year of construction: 1999, condition: ready for operation (used), AMUT EA90/24 SINGLE SCREW EXTRUDER Type: RALDI Screw for PVC oil cooled Application: PVC, PE or PP Working hours 48.000 DC Drive 36,3 KW Year of construction: 1999 11 digital heating controllers Melt pressure and melt temperature display SIEMENS SIMATIC DISPLAY Operating hours: 48,119 h Trigger control via the extruder possible Condition: Good operational Kdedpfx Ask Nn Dzjayek The extruder is my property Sachal extrusion machines D-26345 Bockhorn-Grabstede Bahnhofstrasse 6 Germany

Condition: like new (used), Extruder pants pieces for Weber DS 10.22 Ksdpfohlvm Nsx Aayedk

Year of construction: 2001, operating hours: 64,499 h, condition: good (used), Conical screws, approx. 110 kg/h. A.C. motor 30.0 kW. New motor, 64,499 operating hours. Kdjdpew Hy Uujfx Aaysk

Condition: good (used), Year of construction: 2001, - Manufacturer: IDE - Type: 45/4 - Year of manufacture: 2001 - Monovis Ø45mm 25LD - Right-hand analog control - Screw profile: PVC - 4 heating zones on cylinder - 4 tool heating zones Kedpfsuhpiysx Aaysdk - Motor power: 8.5kW - Up to 60kg/h Good overall condition, very clean machine

Year of construction: 2005, condition: refurbished (used), functionality: fully functional, Twin parallel screw extruder Kdjdpouziyhefx Aayjk - Manufacturer: WEBER - Type: DS 8.5 - Year: 2005 - Double parallel screws ø85mm 17D - 5 heating zones on the cylinder + 2 cooling zones - 5 tool heating zones - Engine power: 56kW - Up to 150kg/h profile - 230kg/h tubes Very good condition

Condition: new, DANFOSS Pack Controller AKPC781A 080Z0191 2204180 Function: Pack with heat recovery Communication: EA expansion Weight: 0.645 kg Analog inputs (AI): 11 Digital outputs (DO): 8 Maximum number of expansion modules: 11 Maximum number of fans: 8 Maximum number of compressor safety signals: 6 Maximum number of compressors: 10 Protection class: IP10 Display options: MMIGRS2, EKA 163B, EKA 164B, EKA 166 Kodpfx Aowm Dq Hoayedk Frequency: 50/60 Hz Division: 25 Supply voltage: 24 V Power consumption: 8 VA