Used Compressed Air Dryer for sale (27,566)

Condition: new, Year of construction: 2026, Firebox output: 175 kW Operating output: 140 kW Flue diameter: 200 mm Hedpfxei Hplrj Aahsu Warm air duct: 1 x 500 mm Firebox length: 950 mm Firebox width: 600 mm Firebox height: 860 mm Air flow rate: 8900 m³/h Power consumption: 3500 W Designed for room volume: 3000 m³ Area to be heated: 500/600 m² Oven height without warm air ducts: 2200 mm Oven width: 930 mm Oven length without flue gas fan: 1700 mm Weight: 615 kg

Condition: new, Year of construction: 2025, operating hours: 1 h, Screw compressor ALMIG BELT XP 8 - 10 bar (air cooled) include dryer include time drain include 2 filters include 270 liter tank galvanized Year 2025 / IMMEDIATELY AVAILABLE! Technical specifications Type: BELT XP 8 270 RD Operating pressure: 10 bar (ue) Delivery quantity, according to ISO 1217 Annex C: 1.00 m³ / min Degree of protection / insulation class drive motor: IP 55 / ISO F Rated power drive motor: 7,5 kW Hedpfx Ajx Rb D Seaheu Operating voltage / frequency: 400/50 V / Hz Sound pressure level (DIN 45635 T.13): 63 dB (A) Length: 1320 mm Width: 695 mm Height: 1898 mm Weight: 447 kg Compressed air connection: G 3/4 "

Condition: good (used), Year of construction: 2000, Tempering unit Overall dimensions: 600 x 700 x 1600 mm Weight: 157 kg Power 6kW Hedpfogvddpox Aahju Voltage: 230 V Refrigerant type: R134.6

Condition: good (used), Motor output 1 kW Hjdpfx Aaovwgn Rshsu Max. pressure 16 bar

Condition: used, Year of construction: 1994, Technical details: Hsdsu Nz Tijpfx Aahou tank capacity: 150 l operating pressure: 11 bar dimensions L x W x H: Ø 550 mm x H: 1,2m weight: ca. 60 kg For sale as shown and described, as an unpressurised tank for a sale at low price. Condensation drain valve at the bottom with hand lever 2 connection pieces 1/2 inch 2 connection pieces on the ceiling side 2 inch with blind plugs Boiler/tank Ø 450 x 1000mm upright on tripod stand Temperature max. +50°C / min. 10°C pressure gauge *

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, 1,0 St. Trockenlufttrockener Hersteller: LABOTEK Hedpfx Aasztz Imjhju Typ: DH380/HEAT Baujahr: 2006 Trockenbehälter: 300 Liter das entspricht 204 kg/Material Trockenlufttemperatur: max. 200° C

Year of construction: 2020, condition: as good as new (ex-display), Demo tool: SDT 200 ASD (ATEX) Ultrasonic Multifunction Detector Set. Hjdpepyg Saefx Aaheu Composed of: 1 x SDT 200 (ATEX) receiver with digital display (numeric) for static peak value detection incl. battery block Monitoring indicators for reliable diagnostics in wear monitoring: RMS. PEAK and Crest factor, integrated data logger for 4000 measurements at 500 locations (grouped by sensor, date and time) 1 x Charger 1 x Peltor Headphones 130 dB 1 x Shoulder Strap 1 x Directional Probe (Screw Tip & Rubber Tip) 1 x plastic case with insert 1 x Instruction manual on USB stick 1 x USB cable for data transfer 1 x calibration certificate (as of 02/2020) 1 x Flexible sensor Atex 550 mm with replaceable sensor head 1 x Spiral Cable 1 x Funnel Directional Probe for SDT200 1 x leakage trailer 1000 pieces (to mark compressed air leaks) Other leakage meters on request. Visit our store. We always have a wide range of new and used compressors in stock!

Year of construction: 1998, condition: used, dryer dry-air KOCH CKT 1000 1000 m³/h year: 1998 Hjdpfsity Adex Aaheu price: 10.900 € contact: Mr. Rainer Eckerle

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 575531, OKS Air receiver tank Hedsqqhtujpfx Aaheu Serial: 575531 2012, 500L tank, 11Bar

Condition: good (used), Year of construction: 1980, Compressed air tank, pressure vessel, pressure tank, compressed air reservoir, pressure vessel, compressor tank, air receiver for oil-air separation system, condensate separator, oil and water separation apparatus, oil separator, oil/water separator, air compressor oil-water separator, air receiver Hodpozt I I Tefx Aahsu -Manufacturer: Atlas Copco, Air tank standing from compressor type GA 408 Pack -Type: 19650295-49 -Contents: 46 l -Operating pressure: 11 bar -Accessories: incl. attachments, see photos -Dimensions: 520/300/H1010 mm -Weight: 62 kg

Condition: new, Year of construction: 2026, The CORMAK 200-litre pressure vessel with a working pressure of 11 bar is a reliable solution designed for storing compressed air in industrial plants, workshops, and pneumatic systems. Its robust steel construction, compliance with European Union directives, and UDT certification make this tank an essential component of any compressed air system. Thanks to its optimized design and high pressure resistance, the tank can serve both as a storage buffer and as an element for stabilizing compressor operating parameters. Key Advantages of the 200 L Pressure Vessel Hjdpfszwlpcjx Aahju Professional pressure-rated construction – made of high-quality 4 mm thick steel, resistant to pressure and corrosion. UDT certification and CE marking – compliance with European safety and quality standards. 11 bar working pressure – suitable for most pneumatic systems, including those with higher operating requirements. High capacity – 200 litres – provides stable pneumatic system supply and reduces the frequency of compressor start-up cycles. Multiple connection ports – as many as 5 connection ports with diameters of 1", 2", and 1/2" allow flexible connection to various installations. High-quality workmanship – durable external paint coating. Space-saving vertical design – allows for efficient use of available space in the workplace. Construction and Technology – Robust Design for Demanding Applications This compressed air tank has been designed for intensive use in industrial environments. The body is made of structural steel with a 4 mm wall thickness, ensuring resistance to pressures of up to 11 bar and providing long-term durability. All welds undergo rigorous quality control, while the tank surface is protected with a coating resistant to chemical and atmospheric factors. The tank is equipped with a nameplate bearing the CE symbol and the UDT notified body number, confirming its approval for use on the Polish and European markets. The set includes complete technical documentation, a pressure vessel passport, and material certificates. Precision and Operating Efficiency – Stable Pressure and Optimized Compressor Performance With a large 200-litre capacity, the tank acts as an air buffer, stabilizing pressure throughout the pneumatic system. This enables the smooth operation of compressed-air-powered equipment and significantly extends compressor service life by reducing the number of start/stop cycles. The vertical design allows for compact installation, which is particularly important in facilities with limited space. A properly selected compressor tank minimizes pressure drops and prevents pneumatic system overload, resulting in greater efficiency and safety throughout the installation. Standard Equipment Connection ports: 5 pcs. – diameters 1", 2", and 1/2" Nameplate with CE marking UDT notified body number Complete technical documentation and pressure vessel passport External anti-corrosion coating

Year of construction: 2018, condition: used, Motan dryairtank LBA 400 – H-O-O-Z year: 2018 price: 3.450 € contact: Mr. Rainer Eckerle Hedpjtphhcjfx Aaheu

Condition: new, Year of construction: 2026, 270 L COMPRESSED AIR TANK – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS Key Features of the 270 L Pressure Vessel Professional Pressure Design – made of high-grade 4 mm thick steel, resistant to pressure and corrosion. UDT Certification and CE Marking – compliance with European safety and quality standards. Working Pressure of 11 bar – suitable for most pneumatic systems, including those with higher demands. Hodpfxsxbzalj Aahju Large Capacity – 270 Litres – ensures stable air supply and reduces compressor start-stop frequency. Multi-connection System – 5 connection ports with diameters of 1", 2", and 1/2" allow flexible integration with various installations. High-Quality Finish – durable anti-corrosion coating inside and outside the tank. Universal Mounting Position – vertical design saves space in industrial environments. Construction and Technology – Robust Design for Demanding Applications This compressed air tank is engineered for heavy-duty use in industrial settings. The body is made from 4 mm thick structural steel, ensuring resistance to pressures up to 11 bar and enabling long-term operation. All welds undergo strict quality control, and the tank surfaces are protected with a corrosion-resistant coating that withstands chemical and atmospheric factors. The tank includes a nameplate with the CE mark and the notified body number of UDT, confirming its approval for use in the Polish and European markets. The set comes with complete technical documentation, a pressure vessel passport, and material certificates. Standard Equipment Connection Ports: 5 pcs – diameters: 1", 2", 1/2" Nameplate with CE Mark UDT Notified Body Number Complete Technical Documentation and Pressure Vessel Passport Internal and External Anti-Corrosion Coating

Condition: used, Pneumohydraulic cylinder TOX Pressotechnik Hydro-pneumatic press, power pack Type: S 04.00.050.12 D No.: 208696.460 Year of manufacture approx. 2000 Pressure capacity: 4.0 tons at 10 bar Pressure capacity: 3.0 tons at 8 bar Pressure capacity: 2.6 tons at 7 bar Pressure capacity: 2.4 tons at 6 bar Pressure capacity: 2.0 ton. at 5 bar Pressure capacity: 1.6 ton. at 4 bar Pressure capacity: 1.2 tons at 3 bar Total stroke: 50 mm Power stroke: 12 mm Hjdpeu D Tz Usfx Aaheu Piston rod: Ø 30 mm Thread for piston rod: M22 x 2 mm Compressed air requirement: 3 to 10 bar - Electronic oil pressure switch with TOX digital display for force measurement, type 167282 - Height only power pack with piston rod = 610 mm - Height of power pack hydropneumatic cylinder only = 560 mm - Additional base plate 160 x 160 x 20 mm - Plunger plate: Ø 68 mm Space requirement L x W x H: 160 x 160 x 660 mm Weight: 21 kg Very good condition 3 pieces available, price per piece

Condition: used, 2 oil-free screw compressors for the production of sterile compressed air. Of these: - Compressor 1 (year of manufacture 2006): frequency-controlled with built-in dryer - Compressor 2 (year of manufacture 1992): with downstream adsorption dryer (Atlas Copco, 2003) Additional title: Compressed air generation with screw compressors; manufactured between 1992-2006 Hsdpfx Aajzkfw Tohsu Capacity compressor 1: 5.952 m³/min, with a final pressure of 8.4 bar Capacity compressor 2: 4,982 m³/min, with a final pressure of 8.0 bar Features: 2 screw compressor (one of which has a built-in dryer and variable-speed drive, and one with a separate dryer)

Condition: good (used), Year of construction: 1986, Kaeser compressed air tank, manufactured in 1986 Tank size: 500 liters Maximum permissible operating pressure: 16 bar Year of manufacture: 1986 Hodpjzrhttefx Aahsu Location: available from our warehouse in 54634 Bitburg - Immediately available -

Condition: used, Screw compressor, KAESER, type BS 50 Manufacturer's serial number: 402852, year of manufacture: 1990 Volumetric flow rate: 5 m³/min. Pressure: 7.5 bar Main motor power: 30 kW Mains connection: 400 volts, 50 Hz Connection thread: 1 1/2" - Operating hours recorded: 1107.90 Hodpfsiyu Ifjx Aahsu - Load hours recorded: 749.00 - Soundproofed Space requirements (L x W x H): 1600 x 1070 x 1350 mm Weight: 900 kg Very good condition Previously used as a reserve compressor and has only a few operating hours.

Condition: used, Year of construction: 2014, Refrigeration dryer Donaldson DV 1800 AP max. pressure 16bar Motor 3,1 KW Year of construction 2014 Hodpfeq Sp A Eex Aahou The offer is aimed exclusively at traders within the meaning of §14 BGB No sale to private individuals!

Year of construction: 2007, condition: used, Screw compressor with refrigeration dryer - Manufacturer: Boge - Model: C9 - Year of manufacture: 2007 - Max. pressure: 8 bar - Max. air flow: 1,180 m³/min. - Motor power: 7.5 kW - Width x depth x height: 480 x 987 x 1,234 mm - Volts/Hz: 400/50 - Weight: 210 kg Refrigerated dryer - Boge Ultratroc - Type. SD 0050 AP - max. 16bar Hedpfx Aoz Hm Rkoaheu - Location: Warehouse, D-32825 Blomberg

Year of construction: 1994, condition: used, dryer dry-air KOCH CKT 300, 300 m³/h, year: 1994, price: 4.900 €, contact: Mr. Rainer Eckerle Hodpfxeb Hu S Ts Aahsu

Condition: new, Year of construction: 2026, Combustion chamber output: 350 kW Hjdpfeyffylox Aaheu Working output: 279 kW Flue gas outlet diameter: 200 mm Hot air distribution ducts: 1 x 600 mm Combustion chamber length: 1200 mm Combustion chamber width: 740 mm Combustion chamber height: 1040 mm Air delivery: 17,800 m³/h Hot air fan power consumption: 3 kW Flue gas fan power consumption: 600 W Designed for room volume: 5,000 m³ Area to be heated: 1,000 m² Oven height without hot air ducts: 2,500 mm Oven width: 1,100 mm Oven length without flue gas fan: 1,900 mm Weight: 850 kg

Condition: new, Year of construction: 2026, The CORMAK 150-litre pressure vessel with a working pressure of 11 bar is a reliable solution designed for storing compressed air in industrial plants, workshops, and pneumatic systems. Its robust steel construction, compliance with European Union directives, and UDT certification make this tank an essential component of any compressed air system. Thanks to its optimized design and high pressure resistance, the tank can serve both as a storage buffer and as an element for stabilizing compressor operating parameters. Key Advantages of the 150 L Pressure Vessel Professional pressure-rated construction – made of high-quality 4 mm thick steel, resistant to pressure and corrosion. UDT certification and CE marking – compliance with European safety and quality standards. 11 bar working pressure – suitable for most pneumatic systems, including those with higher operating requirements. High capacity – 200 litres – provides stable pneumatic system supply and reduces the frequency of compressor start-up cycles. Multiple connection ports – as many as 5 connection ports with diameters of 1", 2", and 1/2" allow flexible connection to various installations. High-quality workmanship – durable external paint coating. Space-saving vertical design – allows for efficient use of available space in the workplace. Construction and Technology – Robust Design for Demanding Applications This compressed air tank has been designed for intensive use in industrial environments. The body is made of structural steel with a 4 mm wall thickness, ensuring resistance to pressures of up to 11 bar and providing long-term durability. All welds undergo rigorous quality control, while the tank surface is protected with a coating resistant to chemical and atmospheric factors. The tank is equipped with a nameplate bearing the CE symbol and the UDT notified body number, confirming its approval for use on the Polish and European markets. The set includes complete technical documentation, a pressure vessel passport, and material certificates. Precision and Operating Efficiency – Stable Pressure and Optimized Compressor Performance With a large 150-litre capacity, the tank acts as an air buffer, stabilizing pressure throughout the pneumatic system. This enables the smooth operation of compressed-air-powered equipment and significantly extends compressor service life by reducing the number of start/stop cycles. The vertical design allows for compact installation, which is particularly important in facilities with limited space. A properly selected compressor tank minimizes pressure drops and prevents pneumatic system overload, resulting in greater efficiency and safety throughout the installation. Standard Equipment Connection ports: 5 pcs. – diameters 1", 2", and 1/2" Nameplate with CE marking UDT notified body number Complete technical documentation and pressure vessel passport External anti-corrosion coating Hodpfxjzwlm Uo Aahju

Year of construction: 2023, condition: new, machine/vehicle number: TR0042_ALM_RD56, COMPRESSED AIR DRYER ALMIG ALM-RD 56 Type: ALM-RD 56 including pre- and post-filter Delivery quantity: 0.88 m³ / min * Compressed air connection 1/2 " Dimensions L x W x H: 372 x 369 x 707 mm Hodpegy Hbusfx Aahju Weight: 32 kg * Maximum compressed air flow, 35 ° C inlet temperature, 7 bar, 25 ° C ambient temperature, pressure dew point 5 ° C Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Screw Compressor by Boge Boge screw compressor, model S220. This compact, high-performance unit provides a reliable supply of continuous compressed air for industrial applications. It is excellently suited for production lines, assembly operations, pneumatics and control systems, as well as for larger machine fleets requiring stable air pressure. The design is characterized by durability, ease of maintenance, and efficient power delivery, contributing to reduced operating costs. Technical specifications: Type: S220 Operating hours: 54,947 h Pressure: 8 bar Free air delivery: 27.9 m3/min Motor speed: 1,500 rpm Power: 160 kW Next maintenance: in 1,000 h. Hodjw Rd Avepfx Aahou

Condition: like new (used), Year of construction: 2023, Like-new screw compressor with a 3.5 kW motor, manufactured in 2022. Hsdpfx Ajzdcdrjaheu Includes an air dryer made by Airtec, model Pro 1100, also like new, manufactured in 2023. 0.38 kW, with a 220 V plug.