Used Compressor With Air Dryer for sale (28,381)

Year of construction: 1988, condition: good (used), A complete Atlas Copco air compressor including Donaldson Ultra Filter and a Tank in good working condition Nledpfx Aljhpx U Aehjc

Condition: used, Piston Compressor KAESER Type EPC 630-250 Serial No.: 1802334 Year of manufacture: 1992 Free air delivery at 6 bar: 440 liters/min. Maximum intake capacity: 630 liters/min. Output pressure: 10 bar Tank capacity: 250 liters Motor power: 3 kW Connection: 400 Volt, 50 Hz (with 16 Amp plug) - 2-cylinder, oil-lubricated - Pressure switch set to 10 bar Nodewypqrjpfx Alhelc - Run time from 0 bar to switch-off pressure of 10 bar = 5 min Space required (L x W x H): 750 x 700 x 1750 mm Weight: approx. 150 kg In good condition

Condition: used, Screw compressor, KAESER, type BS 50 Manufacturer's serial number: 402852, year of manufacture: 1990 Volumetric flow rate: 5 m³/min. Pressure: 7.5 bar Main motor power: 30 kW Mains connection: 400 volts, 50 Hz Connection thread: 1 1/2" - Operating hours recorded: 1107.90 - Load hours recorded: 749.00 - Soundproofed Space requirements (L x W x H): 1600 x 1070 x 1350 mm Weight: 900 kg Nledpfx Aoiyu Ifolhsc Very good condition Previously used as a reserve compressor and has only a few operating hours.

Condition: used, Filter assembly, COMPAIR filter unit for compressor systems Compressed air filter Type: CF 0087B ZP Manufacturer's number: 3363006 / 05 / 005 Operating pressure: max. 16 bar Nsdpohalvdjfx Alhslc Threaded connection: G 1 1/2" Flow rate: approx. 8.5 m³/min Filter element number: CE 0087B - Filter housing made of aluminum Weight: 5 kg Dimensions L x W x H: 125 x 110 x 420 mm Good condition

Condition: used, Year of construction: 2018, functionality: fully functional, The dry air dryer from Koch is up for sale. Below are some technical details: - Designed for 135 kg/h for 7 machines Njdpfx Aoy Amr Eslholc - NEW PRICE of the system: €115,000 Model: CKT 500F, frequency-controlled version - 500 cubic meters/hour dry air - Touch panel control expansion for CKT/EKO dryers - Control system expansion integrated as a conveying system in CKT/EKO dryers, up to 16 points of demand - Containers: 1 x 200 liters; 4 x 150 liters; 2 x 60 liters, with cleaning door - Koch hopper heaters at 3 kW, 5 units - Koch hopper heater at 1.5 kW, 2 units - V2A extraction containers, 7 units - Stationary frames, 2 units - Economy system control for gentle material drying and maximum energy savings - Empty suction valves NW 40, double empty suction, 7 units - And much more...

Condition: used, New compressed air refrigeration dryer, unused compressed air dryer from stock Nedpfsyif I Uox Alhelc Compressed air dehumidifier SMC type IDFA3E-23 Compressed air dryer, compressed air dehumidifier Serial No.: PP0213S Year of manufacture: 2011 SMC compressed air dryer IDFA size 3E Flow rate per hour: 12,000 liters/h (12 m³/h) Flow rate per minute: 200 liters/min. Operating pressure max. 10 bar Operating pressure: 0.15 to 1.0 MPa (manufacturer's specification) Refrigerant: R134a Temperature range: 5°C to 50°C Power consumption: 180 watts Power supply: 230 volts, 50 Hz, 1.2 amps Connection pipe thread: 3/8" - Stainless steel heat exchanger, air-cooled condenser - Condensate separator with automatic drain - Condensate drainage via hose Space required (L x W x H): 410 x 226 x 473 mm Weight: 18 kg New, unused, in mint condition from stock

Condition: good (used), Year of construction: 2003, machine/vehicle number: 3101, Kaeser TD51 Refrigerated air dryer Nlodpfx Aoqqhkpjlhsc Serial: 3101 2003, Refrigerant R34A, 18Bar

Year of construction: 2026, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture is fed to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Nljdpomt Dcxefx Alhec Inlet/outlet pipe diameter (BSP) 1 1/2" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 7000 l/min Power 1.37 kW Power supply voltage 230 V Dimensions (L x W x H) 1000 x 550 x 920 mm Weight 95 kg Type and amount of refrigerant R410a, 900 g

Condition: new, Year of construction: 2025, Combustion chamber output: 350 kW Working output: 279 kW Flue gas outlet diameter: 200 mm Hot air distribution ducts: 1 x 600 mm Combustion chamber length: 1200 mm Combustion chamber width: 740 mm Nodpfjyffylox Alhjlc Combustion chamber height: 1040 mm Air delivery: 17,800 m³/h Hot air fan power consumption: 3 kW Flue gas fan power consumption: 600 W Designed for room volume: 5,000 m³ Area to be heated: 1,000 m² Oven height without hot air ducts: 2,500 mm Oven width: 1,100 mm Oven length without flue gas fan: 1,900 mm Weight: 850 kg

Year of construction: 2026, condition: new, functionality: fully functional, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture goes to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1 1/2" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Nsdpfx Aljmt Dcqeholc Efficiency 3800 l/min Power 0.9 kW Supply voltage 230 V Dimensions (L x W x H) 850 x 480 x 480 mm Weight 59 kg Type and amount of refrigerant R410a, 650 g

Condition: new, Year of construction: 2026, Set containing LUFT 1000 screw compressor, N10S refrigeration air dryer and compressed air tank with a capacity of 270l. The screw compressor of the Polish brand CORMAK, the LUFT series, is the most modern solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high efficiency of the device guarantee effective and trouble-free operation. Additional double filtration on the dehumidifier! KIT INCLUDES: LUFT 1000 COMPRESSOR REFRIGERATION AIR DRYER N10S 270L TANK Technical parameters LUFT 1000 COMPACT Compressor Engine power 7.5kW Dehumidifier Engine power 0.29kW Nedpfx Alsmqlprjhslc General parameters Capacity at 6 bar 750 lpm Capacity at 8 bar 700L/min Capacity at 10 bar 670 lpm Outlet G3/4" Overall dimensions 1320x650x945 mm Weight 500 kg The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Year of construction: 2026, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture is fed to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 1500 l/min Power 0.58 kW Supply voltage 230 V Dimensions (L x W x H) 380 x 600 x 625 mm Weight 31 kg Type and amount of refrigerant R134a, 400 g The price given is a NET price. The price does not include transport costs. Nljdpfemt Dbhox Alhjc For more information, please contact us by phone or email. We invite you to familiarize yourself with the offer on our website.

Year of construction: 2026, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture goes to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Nedpfx Alemt Dcfshelc Inlet/outlet pipe diameter (BSP) 1" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 2800 l/min Power 0.58 kW Supply voltage 230 V Dimensions (L x W x H) 420 x 700 x 690 mm Weight 37 kg Type and amount of refrigerant R134a, 550 g

Condition: good (used), functionality: fully functional, overall weight: 200 kg, Labotek dryer Type: DDM 60 ALB Labotek CON-EVATOR material conveyor Type: PGT 4/DDM Power: 0.5 kW Nlsdovrubnjpfx Alhec

Condition: good (used), functionality: fully functional, Labotek dryer Nledpfx Alevtxmwehsc Type: DDM 120 ALB Power: 8.9 kW Labotek CON-EVATOR material conveyor Type: PGT 4/DDM Power: 0.5 kW

Condition: good (used), Year of construction: 2001, functionality: fully functional, Manufacturer Fasti GmbH Model ERD 65 B Connected load 0.9 kW Nodpfx Alovzwrbohjlc

Condition: used, Year of construction: 2010, Operating hours: 58,730 h Technical data: Max. compressed air pressure: 14 bar Ambient temperature, max.: 50°C Nsdpfxjydlycj Alhslc Refrigerant: R410A, 0.86 kg Connection: 230 V Weight, approx.: 154 kg

Condition: new, Year of construction: 2026, Set containing LUFT 700 screw compressor, N10S refrigeration air dryer and compressed air tank with a capacity of 270l. The screw compressor of the Polish brand CORMAK, the LUFT series, is the most modern solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high efficiency of the device guarantee effective and trouble-free operation. Additional double filtration on the dehumidifier! KIT INCLUDES: LUFT 700 COMPRESSOR REFRIGERATION AIR DRYER N10S 270L TANK Technical parameters LUFT 700 COMPACT Compressor Engine power 5.5kW Dehumidifier Engine power 0.29kW General parameters Capacity at 0-6 bar 680 lpm Capacity at 6 bar 650L/min Capacity at 8 bar 650 lpm Capacity at 10 bar 620 lpm Outlet G3/4" Overall dimensions 1250 x 600 x 895 mm Nsdpfx Aemqlnuelhjlc Weight 380 kg The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Year of construction: 2014, condition: excellent (used), 1,0 St. Trockenlufttrockener mit Material- förderer, als Singlelösung, auf Rollen Nlsdpfjiq Ng Rsx Alhsc Hersteller: SOMOS / Mann + Hummel mit Fördergerät Typ: T200 MC2 Baujahr: 2014 Inhalt Trichter: 20 Liter Trichter: Edelstahl Trockenluftmenge: 200 m³/h Trockenlufttemperatur: max. 200° C

Condition: like new (used), Year of construction: 2026, operating hours: 3 h, available immediately: Kaeser ASK 40 T - 11 bar screw compressor with integrated cold dryer with Controller SIGMA CONTROL 3 Year 2026 Operating hour: 3 h Pressure: 11 bar Nominal power: 22 kW Delivery rate: 3.50 m³ / min Sound level: 69 dB (A) Nlsdpfxoyw Nuro Alhec Compressed air outlet: 1 1/4" Dimensions length x width x height: 800 x 1460 x 1530 mm Weight: 620 kg Visit our store. We always have a large selection of new and used compressors in stock!

Condition: good (used), The screw compressor is being sold because the workshop is being closed down. It has been regularly maintained and is available immediately. It is still connected to the power supply and can be inspected and tested for proper functioning. Nodpfxshgvwqe Alhelc Includes compressed air tank.

Condition: refurbished (used), Year of construction: 2016, operating hours: 2,012 h, functionality: fully functional, machine/vehicle number: 1.8174.0, overall weight: 600 kg, total length: 1,460 mm, total width: 800 mm, total height: 1,530 mm, power: 18.5 kW (25.15 HP), fuel type: electric, volume flow: 210 m³/h, operating pressure: 8 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, noise level: 67 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, The compressor is in like-new condition and fully functional. With 2012 operating hours and recently serviced, the compressor is ready for use. Kaeser filter combination FG-48, FFG-48B, and FF-48B included. See attached photos. Further details available via email or phone. Nedpfow S Im Ijx Alhslc

Condition: as good as new (ex-display), Year of construction: 2022, machine/vehicle number: TR0055_ALMRD225, NEW COMPRESSED AIR REFRIGERATION DRYER ALMIG ALM-RD225 Nedpog Ufx Eefx Alhelc Type: ALM-RD225 incl. 2 x air filters Delivery quantity: 3,50 m³ / min * Compressed air connection 1 1/2 " Dimensions L x W x H: 555 x 505 x 874 mm Weight: 78 kg * Maximum compressed air flow, 35 ° C inlet temperature, 7 bar, 25 ° C ambient temperature, pressure dew point 3 ° C Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Condition: used, Year of construction: 2021, Max. pressure: 16 bar Power: 0.81 kW Nodexz Al Njpfx Alhjlc

Condition: excellent (used), Year of construction: 2025, operating hours: 1 h, functionality: fully functional, variable screw compressor ALMIG COMBI XP 6-270D (5 to 13 bar) include Dryer with time controlled drain include 270 liter tank include controller Air Control Basic Year of construction: 2025 Operatin hours: 1 Technical specifications Type: Combi XP 6-270D Possible operating pressures of the system (continuously adjustable): 5 - 13 bar Delivery quantity at minimum / maximum speed, measured according to ISO 1217 Appendix C. at 5 bar (g): 0.19 to 0.89 m³/min at 6 bar (g): 0.19 to 0.86 m³/min at 7 bar (g) : 0.19 to 0.82 m³/min at 8 bar (g) : 0.18 to 0.78 m³/min at 9 bar (g) : 0.18 to 0.76 m³/min at 10 bar (g) : 0.18 to 0.69 m³/min at 11 bar (g) : 0.18 to 0.67 m³/min Njdpfex Uqxgsx Alhslc at 12 bar (g) : 0.17 to 0.63 m³/min at 13 bar (g) : 0.17 to 0.59 m³/min Nominal power drive motor: 5.5 kW Degree of protection / insulation class drive motor: IP 23 Operating voltage / frequency: 400 V / 73-290 Hz Compressed air connection: 3/4“ G Length: 1530 mm Width: 640 mm Height: 1520 mm Weight: 470 kg Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.