Used Crankshaft for sale (107)

Year of construction: 1981, condition: used, machine/vehicle number: 225, Manufacturer: Schütte Type: ADH 160 Machine No.: 225 Year of manufacture: 1981 Weight: 11t General / technical data: max. turning length: 125mm max. workpiece diameter: 168mm max. drilling depth: 125mm adjustable number of pieces: from 3,4 to 450 sec. working hours: 8.200h working spindle speed: from 90 to 1120 rpm footprint (l x w x h): approx. 4730 x 1700 x 2120mm power supply: 380V / 50Hz Accessories: 7 cross slide 8 longitudinal slides Thread cutting device 4x 2-jaw chuck Ø160mm chuck type: pull chuck with clamping diameter 15 Chuck type: Röhm 0W-406 682 Clamping force 1200 da N 4x 3-jaw chuck Ø160mm Chuck type: Draw chuck with clamping diameter 15 Chuck type: Röhm 1W-406 681 Clamping force 1800 da N Insertion arm over chuck 100mm. The workpiece is fed to the insertion arm by a swivel arm and rotary gripper. Hfjdoipu U Ujpfx Afljk Remark: The machine is in very good condition and has very few operating hours. The machine is set up for crankshaft halves for small combustion engines.

Condition: used, Year of construction: 1980, turning diameter over bed 410 mm turning diameter over slide rest 220 mm turning length 1000 mm centre height 205 mm spindle bore 46 mm spindle turning speed range 40 - 2000 U/min total power requirement 22,0 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2,42 x 1,3 x 1,55 mm Lathes with: - Copying attachment - Forkardt 3-jaw chuck F250 - Multifix tool post Hjdpfjyt R Iwex Aflofk - Coolant system - Machine light - Chuck guard - Chip tray - Chip guard wall - Foot brake

Condition: used, Year of construction: 1959, turning diameter over bed 460 mm turning diameter over slide rest 280 mm turning length 1000 mm centre height 230 mm 720 mm spindle bore 53 mm spindle turning speed range 28 - 1250 U/min Hfodpfxoxpi A De Aflsk total power requirement 4,0 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2,4 x 1,4 x 1,75 mm Lathes with: - Digital display - Quick-release tool post - 3-jaw chucks (200 mm and 160 mm) - Chip tray - Centering center

Condition: used, Year of construction: 1967, turning diameter over bed 500 mm turning diameter over slide rest 320 mm turning length 2100 mm centre height 250 mm spindle bore 60 mm spindle turning speed range 11 - 2000 U/min total power requirement 7,0 kW weight of the machine ca. 2,9 t dimensions of the machine ca. 4,3 x 1,2 x 1,3 mm Lathes with: - 4-position tool post - 3-jaw chuck 315mm - Centering point Hfsdpfxsxwzdco Aflok

Condition: good (used), Year of construction: 1984, Tiede Universal U550 GW Magnetic Electric Crack Tester Manufacturer: Tiede GmbH Type: U550 GW Type: Magnetic-electric crack tester Rated operating current I 5400 A alternating current seats resp. 3800 A alternating current effective, adjustable in 8 steps Flow rate Ø: 8000 Aw full wave direct current. Adjustable in 8 steps, measured according to DIN 54 131 Mobile magnetizing coil lights Ø 800 Feedthrough Ø: 5000 Aw with alternating current adjustable in 8 steps, gemsen according to DIN 54131 Year of construction 1984 Accessories/Special equipment Electronic magnetization controls Demagnetization device Support rollers Darkening cabin Hjdpfx Afeifpg Aslofk Main machine dimensions total length mm 8.000 total width mm 2.500 Total height mm 2.500 Working area remarks Nominal diameter mm ~5.500 Field of application: testing of crankshafts. Item condition: used For further technical data please refer to the machine card. Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), Wenzel roughness and contour measuring station for crankshafts  Measuring plate made of hard stone length: 3670 mm width: 850 mm Flatness tolerance according to DIN 876/1 Nominal value 48 µm Actual value 32 µm Ident No.: 14280 JFA unwinding trestles Hfjdpfx Afjihillelek Financing through our bank is also possible. komplett-konzept.leasingo.de Further measuring plates in other sizes - new and used - can be found in our shop! International shipping costs on request!

Condition: good (used), Pierre Guerin Homogenizer Type: ALM10 Lissage - Serial number: B8180680 - Capacity: up to 3,800 L/h - Pressure: 85 bar Hodpfx Afeyy Rfdjlsfk - Plunger diameter: 50 mm - Stroke: 60 mm - Crankshaft speed: 90 / 181 rpm - Motor: 15 / 10 kW - Feed hopper included - Small manual with technical drawings included - Maintenance recently completed. Excellent condition