Used Cross Cut Optimization for sale (24,083)

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, Dimter OPTICUT 204R OPTICOM ASSIST control – programming in CZ/DE/EN Programming – by classes, quality, marking cut, length cut – full optimization Codexgdwdjpfx Addsaa Very simple programming Full documentation – operating manual, parts catalogue, pneumatic and electric schematics Maximum cutting length 4000 mm (extendable up to 6700 mm) Maximum cutting height 100 mm Maximum cutting width 260 mm Saw blade diameter 500 mm Feed speed 180 m/min Number of sorters – 4 (expandable up to 10) Saw lift – pneumatic Cutting accuracy +/- 0.5 mm The machine is powered and available for testing The machine is like new, 100% complete and fully operational! We can arrange transport within the EU.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, The machine is currently in use. We offer live demonstration, dismantling loading, installation and training on your site Caedpfx Adev Uab Esdja

Condition: repair required (used), Year of construction: 2005, functionality: limited functionality, feed length X-axis: 18,500 mm, feed rate X-axis: 200 m/min, saw blade diameter: 550 mm, cutting height (max.): 120 mm, cutting depth: 5 mm, positioning accuracy: 0.1 mm, cutting width (max.): 4,250 mm, saw drive: 4 W, path measurement accuracy: 1 mm, total length: 19,000 mm, type of input current: three-phase, extraction connection diameter: 120 mm, Equipment: CE marking, Optimizing saw for cutting and removing defects marked by the operator. Belt speed 200 m/min. Infeed length 425 cm. Was in operation until the end. Has been out of use for 24 months. Requires maintenance. Year 2005, no. 1785. Factory manual available. Casdpfexzydiex Addea

Condition: excellent (used), Rema AP-500 Optimizing Saw Infeed material length: 500–6250 mm Blade diameter: 500 mm Motor power: 6 kW Pusher speed: 60 m/min Caodpfx Adext Ezkodsa Defect cutting: fluorescent chalk reader Margin trimming CE certificate DTR technical documentation Year of manufacture: 2018

Condition: ready for operation (used), Maximum saw blade diameter: 550 mm Motor power: 5.5 kW Maximum cutting length: 5 m Discharge table with four ejectors Control via touchscreen panel with inPush software Loading table with chains Codpfx Adjxx Scfsdeaa Length: 7800 mm Depth: 1600 mm Weight: 1500 kg Saw blade speed: 2800 rpm Year of manufacture: 2014 CE marking

Condition: used, Year of construction: 1993, functionality: fully functional, TRVE 450 + HM 500-30-120 + without CE marking as it was not in force in the year of purchase Cjdpfsxyxuwjx Addeaa

Condition: reconditioned (used), Year of construction: 2005, functionality: fully functional, feed length X-axis: 3,000 mm, saw blade diameter: 550 mm, cutting height (max.): 150 mm, positioning accuracy: 0.1 mm, cutting width (max.): 300 mm, power: 4 kW (5.44 HP), Automatic optimizing cross-cut saw – BOTTENE PUSH 180 F1 year of manufacture 2005 machine built to CE standards maximum cutting length 3000 mm automatic chain infeed system electronic pusher with gripper clamp for precise length and perpendicular cuts Cedpfxexwda He Addeaa maximum blade diameter 550 mm saw motor 4 kW (5.5 hp) maximum cutting section 150×300 mm motorized outfeed conveyor with bypassable ejector user manual + CE certificate + electrical diagram function tested (video available on request via Whatsapp) dimensions for transport 6700x1600x1800h mm weight 1500 kg

Condition: used, DIMENSIONS: HEIGHT 100 mm Cedpfx Ajw E Eudeddsaa WIDTH 270 mm ELECTRONIC PUSHER LENGTH 6100 mm SAW BLADE MOTOR 4 kW

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1832.14, feed rate X-axis: 60 m/min, cutting height (max.): 160 mm, cutting width (max.): 360 mm, total length: 1,300 mm, total width: 1,300 mm, TECHNICAL DETAILS Max. cutting height: 160 mm Max. cutting width: 360 mm Max. feed speed: 60 m/min MACHINE DETAILS Machine dimensions (L x W x H): 1,300 x 1,300 x 1,700 mm Infeed table dimensions (L x W x H): 7,600 x 2,000 x 1,100 mm Outfeed table dimensions (L x W x H): 6,300 x 2,100 x 1,050 mm EQUIPMENT Under-table cross-cut saw Automatic feed Csdpjx Ahc Ajfx Addoaa

Condition: excellent (used), Pertici 402-IP Double Miter Saw Maximum cutting length: 3500 mm Maximum cutting width: 200 mm Double miter angle adjustment: 45/-45° Motor power: 2×2.2 kW Saw blade speed: 3200 rpm Blade diameter: 400 mm Pneumatic material clamping Technical documentation CE certificate Year of manufacture: 2021 Caodpex Aibtefx Addoa Machine available on order

Condition: excellent (used), Catalogue number 7837 TECHNICAL DATA - Max. blade diameter: 450mm - Spindle diameter: 30mm - Top pneumatic hold-down - Blade guard - Blade guard also functions as a hold-down - Pneumatic blade stroke - Cutting height: 125x125mm, 100x250mm - Cutting capacity (thickness x width): 50x530mm, 100x480mm, 150x380mm, 200x200mm - Main motor: 5.6kW - Extraction port diameter: 100mm - Table dimensions (L/W): 660x480mm - Table height from base - 2 roller tables - Infeed roller table with guide: 1500mm - Outfeed roller table with guide and latch: 1500mm - Roller width: 300mm Csdpfx Adsx Arhcedsaa - Working pressure: 8bar - Overall machine dimensions (without roller tables) L/W/H: 940x780x1150mm - Weight approx. 450kg ADVANTAGES – German manufacture – DTR documentation – 2 roller tables – Pneumatic blade stroke – Saw used, in perfect condition Net price: 14,900 PLN Net price: 3,550 EUR (based on exchange rate 4.2 EUR) (Prices may change in case of significant exchange rate fluctuations)

Year of construction: 2008, condition: ready for operation (used), Main Drive Spindle speed range 2410 Number of axis 2 Additional Equipment Casdpfxexya Edo Addea Integral protective hood around cutting area Mobile head roller table (3 m) This SCHÜCO PDG e-Cut 600 was manufactured in 2008. It features tungsten carbide sawblades Ø600 mm, three-phase motors 4 kW at 2800 rpm, and blade rotation speed of 2410 rpm. The machine includes electronic control for head tilting, mobile head with automatic positioning, and is set up for chips and fumes extraction. Consider the opportunity to buy this SCHÜCO PDG e-Cut 600 Optimizing Cross-Cut Saw. Contact us for further details regarding this machine. Application Types Sawing (Wood)

Condition: good (used), Code: 0252 Brand: MA BREVETTI Model: JUNIOR 275 Pneumatic double mitre saw for 45° + 45° cuts at both ends, in frames and mouldings of any shape and kind Technical data: Blade diameter mm 275 F30 Casdpfx Aex Au A Njddea Max cutting capacity: Width 70 mm - Height 90 mm Production rate approx. 700/800 cuts Motors n° 2 - 2 Hp each - rpm 2800 Power supply V.380/50 Operating pressure 6 bar Suction port diameter 100 mm Overall dimensions mm 850 x 700 x 1400 mm Weight kg 265

Condition: used, Year of construction: 2001, Wood dimensions to be processed: Input lengths min/max 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max 40 - 300 mm Input thicknesses min/max 15 - 120 mm Wood cross-sections max. 300 x 40 mm max. 200 x 120 mm Fixed lengths after sawing min. 510 - 2800 mm Special application: Cutting blocks, length min/max. 100 - 200 mm (Caution: Multiple block lengths at the sorting line; blocks are transported to the end of the sorting line and fall into the customer's grid box). Cutting/cutting tolerance +/- 0.8 - 1.5 mm (for wood types with minimal resin content and an even surface. Tolerance up to 1 m fixed length, max. tolerance for longer pieces up to 2.5 m). Thickness tolerance +/- 3 mm. Curvature of the wood in all directions: max. 10 mm per meter in length. Wood types: soft or hardwood. System performance: Feed speed, continuously adjustable up to max. 230 m/cutting cycle 0.6 - 1. To obtain the practical output per day, an effectiveness factor dependent on the customer's production conditions must be calculated. Infeed and saw height: 900 mm (placed on customer's platform, saw requires concrete base). Sorting working height. 2000 mm Connection values: Total electrical connection value approx. 18 kW Operating voltage 380 Volt / 50 Hz Voltage fluctuations max. 5% Air consumption approx. 1200 NL/operating pressure approx. 8 bar Extraction speed approx. 30 m/nd Color pebble gray RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Item 1 Infeed and marking station with 1 side support table, adjustable 1 table as stop edge Item 2 Support roller without drive, front side in front of sheet metal table for easier feeding Item 3 Length measuring station with built-in fluorescence camera for detecting error markings Item 4 Automatic width measurement, contactless Item 5 OptiCut 304 optimizing cross-cut saw - right-hand version with built-in waste chute including equipment package for large wood cross-sections Graphic input terminal (16 x 40 characters, Numeric keypad) with software package for optimization and system control. Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Item 6: Outfeed conveyor as sorting station with drive unit, length 7500 m Item 7: 2 ejectors mounted on the outfeed conveyor Caedpsw Sy T Hjfx Addea Storage location: Nattheim

Condition: excellent (used), Max cutting width: 560 mm Max cutting height: 100 mm Csdpfxjxz Up Hs Addoaa Motor: 7.5 kW Year of manufacture: 2007 Blade diameter: 700 mm (max 750 mm) Two-hand control Pneumatic clamp

Condition: new, Year of construction: 2025, Crosscut and Mitre Circular Saws Type ZS 200NF Crosscut and mitre circular saw with a maximum cutting height of 200 mm Robust grey cast iron construction Precise ball bushing guidance of the tool carriage on hardened and ground steel shafts Manual saw feed Quick mitre adjustment up to 65° horizontally and 60° vertically Adjustable fixed stops Lower saw blade guard connectable to extraction system Machine mounted on mobile machine base with 1.5 m long roller conveyors on both sides (left and right) Left side equipped with scale and stop slider Technical Data Motor 400 V / 5.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Mitre range horizontal 45°- 90°- 25° Mitre range vertical 60°- 90°- 30° Saw blade Ø 520 mm (not included as standard) Extraction port 100 mm Weight 490 kg Location: In stock at 54634 Bitburg - Immediately available - Caodpfx Adew Hl Aqjdea On request, we are happy to offer the saw blade as well.

Condition: excellent (used), Year of construction: 2013, Maximum saw blade : 400 mm Digital angle display in degrees ( +/- 46 degree ) 2 x pneumatic clamps Hydraulic blade feed Engine size : 1,8 Kw Digital display with touch screen Hand held barcode scanner 4000 mm infeed with digital pusher 4000 mm manual outfeed with rollers Casdpfxexx Hwwj Addoa

Year of construction: 2003, condition: ready for operation (used), This DIMTER S50 Opticut was manufactured in 2003. A robust optimizing cross-cut saw, it features a processing length of 5 m and a saw blade diameter of 500 mm. A new Movidrive converter was installed in 2018, enhancing its performance. If you are looking to get high-quality cutting capabilities, consider the DIMTER S50 Opticut machine we have for sale. Contact us for more information about this machine. Codpfoxyazxjx Addeaa Application Types Sawing (Wood)

Condition: good (used), Code: 0246 Cjdpexztydefx Addoaa Brand: OMGA Model: TR 2B - NC - CE Standard Automatic double mitre saw with numerically controlled positioner for cutting frames, wood profiles, furniture, wooden window frames, doors, plastic materials, and various - CE standard Technical data: Numerically controlled positioner: allows cutting lists to be stored and the moving head to be positioned automatically Cutting length 3500 mm Blade diameter 350 F 30 mm Motors each 2,2 Kw Rpm 3000 Cutting width 170 mm Cutting height at 90° 102 mm N° 2 vertical pneumatic pressers Suction mouth diameter 80 mm Compressed air 6-7 bar Overall dimensions mm 4400 x 1000 x 1500 h Weight kg 600

Condition: new, Year of construction: 2025, Depth of cut at 90°: 200 mm Depth of cut at 45°: 140 mm Cutting width at 90°: 420 mm Cutting width at 45°: 295 mm Miter range horizontal: 45° -90° -25° Cedpfx Adeiy Ry Asdjaa Miter range vertically: 60° -90° -30° Sawblade diameter: 520 mm rpm: 2800 U/min Motor: 5 kW motor brake: yes suction plant diameter: 100 mm weight: 490 kg

Condition: used, Year of construction: 1999, cutting width 150 mm machine weight ab. 300 kg Cjdpfx Adjva Nqgedsaa 27468

Condition: excellent (used), Double miter saw Pertici Haffner DGS180 Cutting length: 3300 mm Cutting width: 140 mm Two adjustable cutting angles Maximum saw blade diameter: 330 mm Codpfxexg Hans Addsaa Pneumatic material clamps 3 operating modes

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 260105, saw blade diameter: 800 mm, overall weight: 2,960 kg, table length: 700 mm, Equipment: CE marking, TECHNICAL DETAILS Codpfx Ajxq Au Aeddsaa Min. saw blade diameter: 790 mm Max. saw blade diameter: 800 mm Spindle saw blade diameter: 40 mm Infeed table length: 700 mm Outfeed table length: 700 mm MACHINE DETAILS Main motor power: 15.0 kW Dimensions & Weight Dimensions (L x W x H): 3,600 x 2,550 x 2,100 mm Weight: 2,960 kg EQUIPMENT CE marking

Condition: not inspected (used), Year of construction: 2024, functionality: limited functionality, feed length X-axis: 4,000 mm, feed length Y-axis: 5,200 mm, feed rate X-axis: 35 m/min, working width: 400 mm, saw blade diameter: 450 mm, input voltage: 400 V, EXPORT automatic crosscut saw feeding length 4,000 mm saw blade Ø450 mm cutting width 400 mm cutting height 120 mm 9.5 kW saw motor 1.5 kW feed servo motor infeed table 5,200 mm outfeed 3,000 mm Cajdpfx Adsw Adndedja For more information, please contact us, preferably by phone.

Condition: good (used), Code: 0236 Brand: FOM INDUSTRIE Model: BLITZ ALVA 450 - CE Standard Double-head electropneumatic sawing machine for cutting and machining aluminium profiles, plastic, light alloys, pvc - CE Standard Useful cutting length mm 4000 Vidia blade diameter mm 450 F32 Three-phase motors Hp 3 - Revolutions/min 2800 Head inclination: 90 degrees - 45 degrees external - 22,5 degrees external - Intermediate graduation with mechanical stop and reading on graduated vernier scale First head fixed Caedpfx Aoxv Dfaeddja Second head mobile: automatic positioning with manual option - Automatic head positioning speed 12 mt/min Movable head positioning accuracy: +/- 0,1 mm Minimum cutting capacity between the two heads: 300 mm Maximum cutting capacity between the two heads: 4000 mm Hydropneumatic blade feed (adjustable output speed - rapid retraction) Vertical and horizontal pneumatic clamps Spray lubrication of the cut Mobile head roller conveyor 3 mt Operating pressure 7 bar Suction mouth diameter mm 100 Overall dimensions mm 5760 x 1600 x 1950 h Weight kg 1550