Used Cut Line for sale (22,141)

Condition: like new (used), Range (in depending on the lighting conditions) until: 15 m Range with laser receiver: 30 m, & more 5 m: leveling accuracy +/-1 mm Self leveling range: 4° +-0,5 ° Accuracy of the horizontal line at 5 m: +-1.5 mm Rodpfx Ajd Ecncjamon Accuracy of vertical line at 3 m +-0.75 mm Number of laser lines: 2 Weight: 485 g

Condition: new, New rotary lobe pump, rotary pump with electric gear motor Hy-Line Rotary Lobe Pump, industrial pump Hygienic rotary lobe pumps with stainless steel multi-lobe rotor Manufacturer JABSCO-by-Packo HP Hy-Line Type: LH76R B012& (serial no. 44927) Year of construction 2018 Delivery rate: approx. 73 m³/h Delivery rate per revolution: 3 liters/rev Delivery rate at 407 rpm gearbox speed: 1221 liters/min. Delivery pressure: max. 5 bar Rotor speed: max. 600 rpm. Pump inlet connection diameter: 152 mm Pump outlet connection diameter: 127 mm Weight of the pump unit: 165 kg SIEMENS electric motor with gearbox Type: RX 97 DRN180M4/TF Mains connection: 400 Volt, 50/60 Hz Drive power: 18.5 kW Motor speed: 1781 rpm. (specified at 60 Hz) Gearbox speed: 489 rpm. (specification at 60Hz) Motor speed: 1480 rpm. (at 50Hz) Gearbox speed: 407 rpm. (at 50Hz) Gear ratio: 3.64 Output torque: 360 Nm very good condition - as good as new - unused from stock Application: Conveying of: Polymers paper coatings Soaps and surfactants Paints and dyes Pharmaceutical applications Food applications 2 pieces available Price per piece Rodpsitv Rlsfx Aamen

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Complete beer canning line for beer (standard 330 and 500 ml can): 10 000 cans per hour (500ml), fully optimized and calibrated. Only 4 machine operators/workers in filling process. The offer includes: Depalletization, rinser, filles, seamer, RTG level inspection, dryer, carton machine, palletization, CIP, flas pasteurization Padovan, HGB,chiller, compressor etc. Rodpjuq Sb Sefx Aamsn

Year of construction: 1970, condition: used, Cut Tape BRENTA torso 1200 Location Gorzow Wielkopolski. Conditions of delivery Cost of delivery Client cover startup type Rodpfxjcudizs Aamjn negotiated Description Comments Vertical band saw blade stylitowane carbide wheel diameter 1200 mm, adjustable mechanical feed, feed regulation smoothly on the tape and the wheels flat, cast iron, no need to anchor. Important machine has the ability to cut diameters up to 330 mm, new electrics, a complete ready to go, belt width 200 mm stylit, after pouring rubber on the wheels do not need to regenerate.

Condition: used, Year of construction: 1996, Manufacturer: Bogma Model: M75 Year of manufacture: 1996 Capacity: 2700 - 3600 kg/h Complete briquette line. - Mooving flor Rsdpjh A S Erefx Aamsn - Screw conveyor - Screw conveyor - Screw conveyor - Feeding system for Bogama 2pc - Three Bogma (briquette press) - One Bogma for spereparts - Pipes for ready briquettes - All hydraulic - All electric, control - Walking platforms etc

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: PR4-3000-07190386, sheet thickness steel (max.): 22 mm, sheet thickness aluminum (max.): 20 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Cutting area: 3000 x 1500 mm Drives: 400 W AC OMRON servo motors Plasma source Hypertherm: Powermax 105 Duty cycle: 80% 100% duty cycle: 94 Amps Maximum piercing capacities Mild steel: 22 mm Stainless steel: 20 mm Aluminium: 20 mm MACHINE DETAILS Space requirement: 5.50 x 2.80 m Machine dimensions: approx. 3.7 x 2.0 m Transport dimensions: 3780 x 2115 x 1500 mm Weight: 1.1 t Rodpfx Aovw Amceamon Box software: included Operating hours: 265 arc hours

Condition: new, functionality: unexamined, machine/vehicle number: PST400, Complete multi-stage industrial washing system with stainless steel tank structure, ultrasonic cleaning, oil separation, demineralized and ultrademi water washing, hot air drying, and integrated filtration. Equipped with digital temperature control, automated regeneration system, and safety containment basin. Ideal for precision cleaning applications in surface treatment. Rsdpjxfrg Rofx Aamsn

Condition: ready for operation (used), Year of construction: 2016, Stainless steel kneading bowl Rsdpfx Aasv Twgpemsn Manufacturer - Bago-Line/Sottoriva. Model - Twist 90/1. Year - 2016. Voltage - 3x400V. Electric power - 6.5kW. Water dosing included. 90 liter kettle. CLH.24

Condition: used, Year of construction: 2013, 3-axis CNC machining center MTRent/MTCut V110, No. 131057, built in 2013, 30-station tool changer, chip conveyor, cooling units, SIEMENS Sinumerik 828D control system, weight approx. 6,900 kg Rjdpfxowczg Rj Aamsn

Condition: good (used), Pal-Cut 800 Minkpapir Sheet dispenser Rodpfjtub T Usx Aamsn Packaging machine 3 pieces in stock

Year of construction: 2020, condition: used, Safe line metal detection belt Rsdpfexc Iybjx Aamen Metal detector opening 450mm x 100mm See our other listings VMA Wekerom

Condition: excellent (used), Year of construction: 2022, Multihead Weigher & Pouch Bag Filling / Sealing Line. Can mix three different products of different weights in the one pouch bag. Consisting of the following. 24 head weigher, sus304, 3-mix, 3 top cones, 100 degree flat chute, 2.5L dimple plate, touchscreen, photo sensor Pouch Machine Change Parts Gantry with stairs Rsdpfx Aaovw Egrjmjn 3 infeed elevators Ice Viper Printer Set of wash walls to suit 2 x Cross feed conveyors All manuals and spare parts included Can be seen running In excellent condition

Condition: good (used), Marel SC90 Salmon Slicer Salmon Slicer Model: SC90 Silk Cut 11 Redpfxov Dmz Ds Aamon D Cut slicer Single Lane With adjustable slice thickness and angle Up to 90 slices per minute Slice angle: 8-20 degree Dual frequency 50/60Hz

Condition: used, Year of construction: 2017, operating hours: 49,000 h, functionality: fully functional, machine/vehicle number: 170015, Nitrogen generator model number Nitro -Gen 250. This generator is in operation and running 24 hours 5/6 days a week, it is in excellent condition and routinely serviced. It produces nitrogen gas at 99.5 to 99.9% purity with a flow rate of 40/55 M3/hour for packing food to MAP. requirements. Flow rate varies depending on the purity of Nitrogen required. Rjdsxbta Dopfx Aamen It is estimated it will have a higher flow capacity than that quoted, but in it's present location is sufficient to supply our 4 production lines. There are also 2 buffer/storage tanks included as shown. In addition there is a 11Kw compressor that supplies the generator- if required. With the buffer tanks and compressor[if required] this is a complete working Nitrogen generation system. Operation & installation Manual available. Documents -PDF with rating of this 250 model relative to different purity level settings The machine is for sale only due to expansion of the business resulting in additional new production lines requiring higher capacity equipment.

Condition: refurbished (used), Complete cheese grating line for cheddar or Mozzarella cheese blocks. Cheese blocks are cubed and fed to the Cheese grater then up a conveyor dosed with powder and tumbled Rodpjp T Tghsfx Aamsn Arcall Cheese cutter, transfer conveyor, Urschel CC grater, incline conveyor and tumble mixing drum Can produce 1,000 Kg of grated cheese per hour. A Weigh bagging system can be added to the grated cheese line

Condition: good (used), 1 x Carrot Line and Grader system Can also be used for potatoes, onions, beet root and brussel sprouts etc. Rjdpfxev I S D Se Aamsn System will be coming out of production end of May/early June. All equipment has had a full service and checked over during the spring period for the coming year. Haith Screen Bits Remover. The Screen Bit Remover continuously removes broken fragments of crop and debris from the produce flow. Carrots are transferred onto a traveling screen with a set size aperture. As the screen is conveyed forward, two full-width agitators gently move the crop causing any bits and debris to drop on to a waste conveyor below where the produce is taken over the end. The screen and agitator speeds are variably controlled individually to suit the various crop conditions. Grader / sorter Odenberg Titan 2 automatic camera grading system – installed in 2008. Titan 2 Sorter 6002.2, 3-way carrot sorter. The first sorter removes product that is not usable, damaged etc to the waste line. The second sorter removes short carrots, twisted and misshaped which are sent directly to the value tank. All the rejects go through the positive sorting area and the grading operative throws back any product that is fit for value sale. High capacity and low maintenance sorting machine Flexible sorting machine with gentle handling assured Quality control and feedback accessible through intuitive touch screen Consistent long-life accuracy. Grading Station. The grading operatives throw out any unusable product to the waste line via the positive grading area. Two to four graders can operate here depending on the quality of the produce. Wyma Lift Roller Sizing Grader – installed in 2019 The product is divided into five grades. 500g, 0-25mm, this goes to the value tank. 1kg, 25 – 42mm max. Loose min 30 – 45mm max. Lumpers, min 45mm upwards. Oversize. The Wyma Lift Roller Sizer is a diameter grader suitable for a wide range of fruits and vegetables including carrots, potatoes, parsnips, beets, citrus, onions, bulbs, brussel sprouts, rutabaga and other round or tubular products. It is extremely versatile, offering multiple size outputs at high capacity in one machine. It can cater for a large range of product sizes and shapes through a selection of different roller options. Product size ranges, or size bands, are created by adjusting the spacing between the rollers, at defined locations, along the length of the machine. The Lift Roller Sizer is made from stainless steel and food-grade plastic materials. Five Lift Roller Conveyors. All supporting framework available. *Video available on request* Located in Wexford, Ireland. Buyer to collect – machinery will be dismantled and loaded to your vehicle. UKFM2-6653

Condition: used, Slitting line SECO 60″ x 0.375″ x 50,000Lb (A3791) is perfect solution for longitudinal coil metal cutting into strips with maximum metal thickness 0.375” and maximum coil width 60” Cold Rolled and Hot Rolled Steel 18-60” Strip Width 2 Speed Gear Box 200-500 FPM Thickness: .032″-.375” Complete Line with the Following Components: L-Type Entry Coil Car 40,000# Max Coil Weight Uncoiler: Coil ID: 23-30.50” Coil OD: 72” Maximum Coil Weight: 40,000# Maximum Sliding Base Hydraulic Expansion Peeler and Hold Down Roll 5 Roll Coil Breaker Entry Adjustable Edge Guides Entry Crop Shear Slitting Head: 10” Arbors 40 HP Motor Drive 2 Scrap Winders Recoiler: Coil OD: 72” Max Coil ID: 24” 150HP DC Motor Redjtiy Ntspfx Aamen 3 Arm Exit Turnstile 40,000# per Arm Motorized Turn Complete Line with Knives, Rubbers, and Spacers Controls, Hydraulics, and Electrics

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, operating hours: 11,000 h, controller model: Sinumerik 840D, laser power: 2,700 W, sheet thickness steel (max.): 6 mm, sheet thickness aluminum (max.): 4 mm, working length: 6,500 mm, TruLaser Tube 5000 with Special Equipment: Laser TruFlow 2700 & SeamLine Tube! TECHNICAL DETAILS Laser Power: 2,700 W Maximum Sheet Thickness (Steel): 6 mm Maximum Sheet Thickness (Aluminum): 4 mm Working Area: 6,500 mm MACHINE DETAILS Rodpoyanr Tsfx Aamsn Laser Type: TruFlow 2700 Control System: Sinumerik 840D Laser Operating Hours: 11,000 h EQUIPMENT - Documentation / Manual - Safety light curtain - Sturdy machine frame with integrated laser unit - CO2 laser TruFlow 2000, high-frequency excited, with cooling unit - Maintenance-free three-phase servo motors - NitroLine high-pressure cutting - SprintLine for rapid processing - Programmable cutting gas pressure control - Laser cutting head with 5 lenses - Quick-change device for the cutting head - Laser power control - Laser logbook function - Automatic shutdown - Workspace illumination - Multi-beam light curtains - Fully enclosed and ventilated beam guidance - Compact dust extractor - Protective enclosure - PRS 3001 discharge station with brush table - Set of clamping jaws D 20–85 mm and D 85–150 mm - 1 set of V-shaped form shells and guide rollers for round tubes - 1 set of U-shaped form shells and guide rollers for a circumscribed diameter of 120 mm - SeamLine Tube

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 22,600 h, machine/vehicle number: A0230A2187, laser power: 7,000 W, sheet thickness steel (max.): 25 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 116 mm, No minimum price – guaranteed sale to the highest bidder! TruLaser 5030 Laser Cutting Machine with Special Equipment TruFlow 7000! TECHNICAL DETAILS Laser power: 7,000 W Travel X-axis: 3,000 mm Travel Y-axis: 1,500 mm Travel Z-axis: 116 mm Max. sheet thickness (steel): 25 mm Max. sheet thickness (aluminum): 20 mm X-axis feed rate: 200 m/min Max. workpiece weight: 900 kg MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 11,100 x 4,600 x 2,600 mm Rsdpsyanplofx Aamjn Total weight: 12,000 kg Control system: SINUMERIK 840D Laser type: TruFlow 7000 Laser hours: 22,600 h EQUIPMENT • Enclosed machine frame with integrated laser unit • Motion unit for ultra-precise machining • Gantry drive combined with linear direct drives • Enclosed beam guidance • Single cutting head strategy • TFT color monitor • Longitudinal conveyor belt for small parts and scrap • Automatic pallet changer • Work area lighting • Positioning laser diode • Oil spray device • Piercline • FocusLine • NitroLine • PlasmaLine • CO2 Laser TruFlow • Maintenance-free turbo radial blower • Lens cutting head with 250 mm lens • Universal quick-change device (UTI) with bus connection • LensLine with condition monitoring • ControlLine: height control and sheet edge detection • Auto shut-off • ConturLine • FastLine • FlyLine • Microweld • USB interface • RJ-45 network connection • CE marking • Light barriers • Multi-chamber extraction system • Compact dust extraction unit • Complete operating manuals • Lens cleaning kit • Transport locks • Crosshairs/ measuring bridge

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 89N1160, cutting width (max.): 800 mm, insertion depth: 800 mm, overall weight: 900 kg, reverse speed: 70 mm/s, TECHNICAL DETAILS Cutting width: 800 mm Insertion depth: 800 mm Maximum operating height: 100 mm Pressing force: 180–2,700 daN Minimum cut without cover plate: 15 mm Minimum cut with cover plate: 50 mm Return speed: 70 mm/s MACHINE DETAILS Power consumption: 4.0 kVA Power supply: 400 V, 50 Hz, 2.6 A Control: 18.5" touchscreen Program memory: 1,998 jobs Total cuts: 24,551 Weight: 900 kg Redpfoycr Ikex Aamen Table: Stainless steel with air support EQUIPMENT 1× mounted POLAR 78 1× new POLAR 78 SKH-2, 960×110×11.7 mm Process visualization Hydraulic swinging angled cut LED cutting line indicator Air table Robust machine body Ultra-fast knife change with POLAR OptiKnife New spare knife

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 18,000 h, machine/vehicle number: A0215A0232, laser power: 2,500 W, sheet thickness (max.): 15 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, positioning accuracy: 0.1 mm, overall weight: 8,900 kg, TECHNICAL DETAILS X-axis travel: 3,000 mm Y-axis travel: 1,500 mm Rsdeyb Rzyspfx Aamsn Laser power: 2,500 W Maximum sheet thickness (mild steel): 15 mm Maximum sheet thickness (stainless steel): 6 mm Maximum sheet thickness (aluminum): 5 mm Axis speed: max. 60 m/min Positioning accuracy: ±0.1 mm MACHINE DETAILS Dimensions & Weight Dimensions (L × W × H): approx. 7,400 × 3,300 × 2,300 mm Machine weight: 8,900 kg Mains connection: 400 V / 50 Hz Connected load: 65 kVA Control voltage: 24 V Required fuse protection: 3 × 100 A Compressed air connection: 7–14 bar Nitrogen connection (N₂): 29 bar Oxygen connection (O₂): 14 bar Operating hours: approx. 18,000 h EQUIPMENT Automatic pallet changer FocusLine laser technology NitroLine laser technology Maintenance-free AC servo drives

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 724, saw blade diameter: 600 mm, table height: 850 mm, positioning accuracy: 0.4 mm, rotational speed (max.): 3,000 rpm, working length: 8,000 mm, TECHNICAL DETAILS Saw blade diameter: 600 mm Motor power: 12.5 HP Saw blade speed: 3,000 rpm Working table height: 850 mm Extraction ports: 3 units, diameter: 100 mm Max. working length: 8,000 mm Positioning accuracy: +/- 0.4 mm Rjdpfsyf Evyox Aamon Cutting capacities Width 610 mm, height: 30 mm Width 580 mm, height: 60 mm Width 530 mm, height: 100 mm Width 490 mm, height: 120 mm Width 450 mm, height: 140 mm Width 380 mm, height: 160 mm MACHINE DETAILS Drive system of saw unit: hydraulic Discharge area: 4,000 x 600 mm Compressed air requirement: 7 bar Dimensions & Weight Overall dimensions of assembled machine (L x W x H): 13,000 x 2,000 x 1,600 mm Transport dimensions (L x W x H): Machine 1,200 x 1,700 x 1,600 mm Transport dimensions (L x W x H): MATRIX pusher 8,800 x 1,500 x 1,500 mm Weight: 1,600 kg EQUIPMENT Feed system with precision rack and pinion and brushless motor Position measurement via magnetic tape Pneumatic lifting of the pusher with workpiece measuring probe Cutting cycle control via keyboard or remote PC Operator software with 99 programmable cutting cycles Operator software with 1 cutting cycle for 100 programmable dimensions Safety cover for cutting area Two-hand operation safety device Discharge flat table

Condition: ready for operation (used), functionality: fully functional, cutting length (max.): 3,550 mm, cutting width (max.): 530 mm, overall weight: 9,000 kg, stroke length: 100 mm, TECHNICAL DETAILS Usable cutting length (as double guillotine): 3,200 mm Usable cutting length (as single plate shear): 3,550 mm Press stroke: 100 mm Rjdpfx Aaoyf Eucsmon Press width: 550 mm Min. cutting width: 18 mm Max. cutting width: 530 mm Scrap setting range: 0/50 mm Operating pressure: 6/7 bar MACHINE DETAILS Installed total power: 13.9 kW Dimensions & Weight Dimensions (L x W x H): 5,200 x 1,700 x 1,800 mm Weight: 9,000 kg EQUIPMENT Robust steel construction Blade beam made of cast iron Self-lubricating prismatic guides Adjustable rear support Press for holding the veneer package during cutting Photoelectric cells Electronic programming device Perimeter safety guards

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, cutting length (max.): 4,400 mm, cutting width (max.): 4,300 mm, main saw diameter: 350 mm, controller model: G-VISION, Equipment: scorer, TECHNICAL DETAILS Cutting dimensions: 4,400 x 4,300 mm Redpfoyf Epyox Aamon Saw blade projection: 90 mm Saw carriage feed speed: 5 - 100 m/min Pusher feed speed: 125 m/min Pusher return speed: 60 m/min Return speed: 100 m/min Main saw blade diameter: 350 mm Main saw motor power: 12.5 HP Scoring saw diameter: 180 mm Scoring saw motor power: 2 HP Extraction port: 200 mm Compressed air: 6.7 bar MACHINE DETAILS Control system: G-VISION Dimensions & Weight Dimensions (L x W x H; installed): 6,400 x 7,500 x 1,800 mm Dimensions (L x W x H; for transport) Machine: 6,500 x 1,500 x 1,800 mm Dimensions (L x W x H; for transport) Pusher: 5,200 x 1,200 x 1,200 mm Total weight: 3,200 kg EQUIPMENT Automatic horizontal panel saw with clamps Frontal stack loading Three front air cushion tables Automatic pusher with lateral and top guides as well as 7 pneumatic clamps Automatic side alignment Automatic saw blade projection adjustment Electronic control of speed and position Easy access to saw carriage Pneumatic quick-change unit for tools Multitasking operating system Microsoft Windows XP/2000/NT Sequential control of cutting patterns Parametric control of feed speed Direct control of machine functions Cutting pattern adjustment

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, cutting width (max.): 3,200 mm, cutting length (max.): 3,200 mm, stack height: 1,200 mm, type of input current: three-phase, front table length: 3,200 mm, total width: 3,200 mm, Equipment: safety light barrier, ESKO - Kongsberg C64 with very low hours fully atomated - pallet to pallet board feeder - I-BF 60M board stacker - I-MS 60 M i-camera kit, underside cammera conveyer (new matt for buyer installation - currently with origynal one) almost all optional tools: Rodoxy Nznepfx Aamen Hi power milling unit (HPMU-C) Dual HDU-C package (crease wheels - small+big, perforation, V-cut) Variangle kit VibraCut-C tool Corruspeed Knife (for cardboards) Hi-Force knife - Cpackage inc.blade adapter RM knife tool - C package Multizone pannel TB - Industrial stationary Vacum cleaner sound insulating