Used Cutting Mill for sale (22,249)

Condition: new, machine/vehicle number: Baureihe GSP, When shredding long pipes and profiles, conventional granulators face significant challenges. In most cases, pits or platforms are required to feed the long and bulky parts. This is why ZERMA developed the GSP series. Thanks to the nearly horizontal feed hopper, long pieces can be easily fed, and the risk of blockage is eliminated as the machine meters the material automatically. When the grinding chamber is overfilled, no further material is accepted until the machine can operate again without overloading the motor. Dkodpoyr Thksfx Aizjw ZERMA also offers a wide range of options such as extraction systems, conveyor belts, metal detectors, fine material separators, and more.

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Technical Data Grinding/Workpiece Diameter: up to approx. 300 mm (partially up to 350 mm) Grinding Length/Stroke: approx. 550 mm (slide travel) Djdoxtiunspfx Aizekw Module range (for hobbing cutter resharpening): min. module approx. 0.5 to max. module approx. 25 Number of flutes: typically 1–99 pieces (depending on tool set) Grinding wheel diameter: approx. 150–300 mm Grinding wheel speed: up to about 2,700 rpm Centre distance (workpiece spindle): typical range 400–800 mm Swivel/Pitch range: e.g. grinding wheel head swivel 0–15° Machine weight and space requirement: approx. 4.2–4.9 t weight; space approx. 3 × 2.6 × 2.3 m Electrical data: operating voltage e.g. 380 V three-phase, control 24 V, auxiliary voltage 220 V

Condition: used, PARPAS Type AU engraving tool grinding machine Manufacturer's No. 854/36 Year of manufacture 1971 Grinding wheel diameter 100 mm Dksdpfxjdzp T Tj Aizsw Grinding spindle speed approx. 3500 rpm Motor power approx. 0.55 kW Mains connection 380 volts, 50 Hz - Collet chuck (DECKEL system with S20x2) - Collet chuck Ø 15.0 mm - Diamond grinding wheel dresser for the face of the grinding wheel Space requirement L x W x H 700 x 350 x 450 mm Weight approx. 80 kg good condition

Year of construction: 2012, condition: good (used), Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology -Manufacturer: Rapid, Granulator Hammer Mill Cutting Mill Mobile -Type: G15035-DT -Drive motor: Siemens 2.2 kW -Funnel opening: 620 x 350 mm Dkedpfxez A S Dne Aizow -Outlet: 350 x 180 mm -Sieve: Hole size 5 mm -Dimensions: 650/630/H1240 mm -Weight: 192 kg

Condition: used, The Herbold PU 500 fine grinder is suitable for fine grinding of plastics and soft to medium-hard materials. Dkedpfxsz Hxhuo Aizew Drive power 55 kw Grinding disk diameter 500 mm Throughput capacity approx. 200-800 kg/h depending on material and fineness

Condition: used, Year of construction: 1995, SECOND-HAND END-CUT OFF BORING AND MILLING MACHINE BACCI MOD. TTF1 - CE RULES Dkodpfx Aiomxfhmszjw - Volt. 380/50 - S/N 333 - Year 1995

Condition: excellent (used), functionality: fully functional, Catalog number 7364 TECHNICAL DATA - max. workpiece height: 160mm - spindle working length: 250mm - spindle diameter: 40mm - max. tool diameter: 220mm - worktable dimensions (length/width): 410x1000mm - motor power: 11kW - 2 pneumatic workpiece clamps - dust extraction port diameter: 160mm - dimensions (length/width/height): 1070x1260x1400mm - weight: 650kg ADVANTAGES – Made in Germany – Additional set of milling cutters + copy Dedpoztaq Tjfx Aizjkw – Unpainted – Used milling machine, very good condition Net price: 33900 PLN Net price: 7884 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to exchange rate fluctuations)

Year of construction: 2012, condition: used, Technical details: Number of working hours: ca. 700 h number: Rotormesserhalter: 5 number: Stattormesserhalter: 4 Rotor-Ø: 440 mm Dkodpfx Aiou Nw Ebszew material: PET control voltage: 24 VDC kW Cutting mill (shredder) The plastic granulator is intended for industrial use. Application: Size reduction of all kinds of plastics, such as ABS, POM, PA6, PE, PP, PG and PET Plant consists of a granulator with belts and a bottle bunker. Material is fed into the bunker via feeding belt Hopper 20M2 V2A complete with gear motor 7,5 kW, The screw conveyor is activated by the control system of the granulator. Bucket volume approx. 20 m³, HxWxD: 4400x3300x3300mm, weight approx. 27,0 to, Bunker with discharge unit CentriCut 44SR granulator 55 kW, granulator 55 kW (50Hz, 400Volt) and feed screw 55 kW (50Hz, 400Volt) Grinding chamber: rotor knife length 272mm, weight approx. 2.0 to Conveyor belt NT9, belt length 3500mm, useful belt width 416mm, (guide profile height 60mm, driving bar height 60mm, driving bar distance approx. 500mm) total length 3550mm, total width 780mm, total height 2350mm, weight 250kg Sound insulation LxWxH: 2700x2300x2500mm, weight 1,3 to Tunnel detector 600 is integrated into the CentriCut cutting mill on the control side, scanning side 600mm, passage width 840mm, passage height 400mm, weight approx. 150kg The plant is ready for transport and for sale. i.D. *

Condition: used, machine/vehicle number: G11762, Rotor diameter: 200mm Rotor width: 100mm Rotor blades: 32 rows Stator blades: 1 row Inlet cross-section: approx. 90 x 10mm Drive motor: 4.0 kW Djdpfxoz N Ix Ne Aizskw Mechanical feed device for extruder strands

Condition: used, machine/vehicle number: K11739, Rotor diameter: 150 mm Rotor width: 200 mm Rotor blades: 3 rows Stator blades: 2 rows Inlet cross-section: approx. 300 x 200 mm Drive motor: 2.2 kW Dkodpfxsz N Iyas Aizsw

Condition: used, machine/vehicle number: K12805, Rotor diameter: 260 mm Rotor width: 410 mm Rotor blades: 5 rows Stator blades: 2 rows Infeed cross-section: approx. 2 pieces, 10 x 120 mm Dkodpfxoz N Iyme Aizjw Drive motor: 11 kW Mechanical infeed device for film edge strips

Condition: used, machine/vehicle number: K12804, Rotor diameter: 260 mm Dedpsz N Iygefx Aizekw Rotor width: 410 mm Rotor blades: 3 rows Stator blades: 2 rows Inlet cross-section: approx. 260 x 410 mm Drive motor: 11 kW Wear-resistant design of the grinding unit.

Condition: used, machine/vehicle number: K12936, Rotor diameter: 340mm Rotor width: 520mm Rotor blades: 5 rows Dkodsz N Iyyspfx Aizew Stator blades: 2 rows Inlet cross-section: approx. 340 x 520mm Drive motor: 22kW

Condition: used, machine/vehicle number: K12895, Rotor diameter: 260mm Rotor width: 410mm Dkjdjz N Iytepfx Aizow Rotor blades: 5 rows Stator blades: 2 rows Infeed cross-section: approx. 2 pieces of 140 x 40mm Drive motor: 7.5kW Vacuum system for drawing in film edge strips

Condition: used, Universal milling head, milling adapter, milling extension, angle milling head Dksdpfx Aiob Iwriezjw -Spare part: from a Stankoimport milling machine -Milling head: with quill -Recording: Exit -Recording: Entrance -completely swiveling -impact head -Equipment -Pitch circle -Dimensions: 1200/800/H300 mm -Weight: 200 kg -Sale only in full

Condition: used, machine/vehicle number: 8802, Infeed cross-section approx. 650×1000 mm 3-knife rotor (knives arranged offset) 2 stator knife rows Rotor diameter 500 mm Dkodpfxoyr Tius Aizow Rotor width 1000 mm

Year of construction: 2005, condition: excellent (used), functionality: fully functional, machine/vehicle number: 14764, Key operating data Motor power (standard): 5.5 kW Cutting diameter of the rotor: 300 mm Rotor width / cutting length: 125 mm Rotor speed: 230 rpm (slow-speed system for noise and dust reduction) Dedpfxoztplgo Aizskw Average output (throughput): 80 kg/h (depending on the type of plastic and the mesh size of the screen) Power supply: 3 x 400 V + N, 50 Hz Cutting system and working chamber Opening of the shredding chamber: 450 x 335 mm Opening of the feed hopper: 490 x 420 mm Number of rotating knives (on the rotor): 10 Number of fixed knives (on the stator): 2 Cutting geometry: Shear cutting with a slanted rotor, which facilitates the handling of three-dimensional parts Standard screen: Mesh size 6 mm (round, interchangeable) Particle size of the recovered regranulate: Standard 4–8 mm (depending on the installed screen) External dimensions and weight Machine length: 1100 mm Machine width: 900 mm Machine height: 2100 mm (for the version with a high stand frame for dust extraction) Total weight: 500 kg Additionally: new replacement knives, three screens with 5, 6 and 8 mm Cross magnet in the feed hopper!

Year of construction: 2003, condition: good (used), Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology -Manufacturer: Rapid, Granulator Hammer Mill Cutting Mill Mobile -Type: 1528 -Drive motor: 2.2 kW Dksdpszn Iqkjfx Aizjw -Funnel opening: 280 x 180 mm -Outlet: 280 x 180 mm -Sieve: Hole size 6 mm -Quantity: 1 cutting mill available -Dimensions: 600/550/H1140 mm -Weight: 183 kg

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: TH GST 4060 2411 001, overall weight: 1,650 kg, rotor diameter: 400 mm, number of blades: 6, rotor width: 600 mm, power: 22 kW (29.91 HP), The compact inline granulators of the GST series are designed for use in injection molding and blow molding operations. They are suitable for recycling, for example, bulky parts such as bottles, canisters, crates, sprues, and injection-molded parts. Thanks to their low feed height, the machines can be easily loaded by hand or with a small conveyor belt. Low noise emissions and minimal space requirements make the GST series the perfect solution for inline size reduction. All GST series machines feature a compact, sound-insulated machine housing and a noise-dampened feed hopper. The feed hopper can be opened and closed via a gas pressure damper. The compact granulators are available with two rotor diameters (250 mm, 400 mm) and rotor widths from 300 up to 1000 mm. Smaller machines come with an open F-rotor, while the larger models are equipped with the heavier S-rotor. The curved rear wall of the cutting chamber ensures aggressive material intake and prevents blockages. Thanks to the modular construction of the granulator, it can be easily upgraded with additional options such as replaceable wear plates. As with all ZERMA granulators, rotor and stator knives can be adjusted outside of the machine, significantly reducing downtime during maintenance. An adjustment gauge is included in the standard delivery. The control cabinet is mounted externally on the noise protection enclosure, and all wiring is routed internally within the unit. Technical Data: Djdpfjy Dgpmjx Aizokw Rotor diameter (mm): 400 Rotor width (mm): 600 Drive (kW): 22 Rotor knives (rows): 3 x 2 Stator knives (rows): 2 Screen perforation (mm): > 8 Cutting chamber (mm x mm): 400 x 600 Weight (approx. kg): 2000

Year of construction: 1997, condition: used, machine/vehicle number: 540897, pipe diameter max. 1,500 mm tool diameter max. 200 mm feed rate 40 mm / min sawing of pipes in steel and greycast  iron with wall thickness of up to 22 mm milling of pipes in steel and grey cast iron with wall Dksdpfx Aisd Srdxszow thickness of up to 15 mm cutting speed 35 m / min compressed air requirement 6 bar - 2m³ / min weight approx. 90 kg  

Condition: excellent (used), Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology, -Condition: Mill is equipped with a new set of blades, but without a control unit or sieve. -Manufacturer: RAPID, Side-mounted mill cutting mill -Type: 650-M -Drive motor: 37 kW -Number of cutting blades: 10 pieces -Number of counter blades: 2 pieces -Funnel opening: 600 x 300 mm -Rotor width: 610 mm -Rotor diameter: 300 mm -Quantity: 1 cutting mill available -Price: per piece Dkodewg Axvepfx Aizsw -Dimensions: 1385/1200/H2170 mm -Weight: 1208 kg

Condition: used, Lista drawer cabinet with milling tools Lista drawer cabinet Number of drawers: 13 Dksdjq Aa I Tepfx Aizew Type of extension: Full extension Very high load-bearing capacity due to precise and stable construction made of high-quality, welded sheet steel Color of cabinet: Reseda green, RAL 6011 Load capacity per drawer: 200 kg External dimensions W x D x H: 720 x 710 x 1000 mm Contents: Metal circular saw blades Disc milling cutters, cross-toothed and coupled Disc milling cutters, cross-toothed Angle, semi-circular milling cutters Dovetail milling cutters Semi-circular milling cutters Thread milling cutters More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: excellent (used), For sale: a professional milling cutter and drill sharpener, model PP U3. In very good condition, the device is complete and ready for use. The set includes: • a set of grinding wheels • an adjustable angle vise • a workshop lamp on a flexible arm • wrenches and fastening elements Parameters: • for sharpening cylindrical and spiral shank milling cutters • for sharpening stepped and cylindrical drills • linear speed of the wheel up to 35 meters per second • maximum noise level of 66 decibels • device weight: 41 kg A robust and stable design, ideal for precise tool machining. A reliable solution for toolrooms, CNC workshops, and machine shops. Dedpfx Aoz Slf Tsizskw

Condition: used, Year of construction: 1973, Indexing milling cutter with 3-roller feed spindle, 30 mm diameter. Location: Nattheim. Dodpfxszd Tg Ao Aizjkw

Condition: used, Wilhelm Stehle 2/24 milling cutter sharpener Dkodpfx Aiozhuddjzew