Used Cypress Welding Equipment for sale (44,228)

Condition: excellent (used), Year of construction: 2018, arm reach: 1,300 mm, Reach: 1300 mm Load capacity: 12.5 kg Weight: 33.5 kg Type: MSIP-REM-URK-UR10 Year of manufacture: 2018 Serial number: S300711 Lorch S5 RoboMIG XT cobot welding system Cjdpfew N N Dcsx Alfjhd 400-A welding system.

Condition: new, Year of construction: 2025, Technical Specifications of KHP60 G Automatic Spiral Fan Guard Welding Machine Codjwvbxtjpfx Alfohd Operated: Pneumatic (Up and Down Piston) Pressure: Up to 8 bar Power: 60KVA Welding Capacity: 5mm + 5mm thick 4 wires same time Maximum Force: 610 daN Input Voltage: 380V/50Hz Protection Fuse: 200A Power Level: %1-100 power adjustable by digital microcontroller Weld Time: 1-100 Cycle (20ms - 2s) adjustable by digital microcontroller Arm Length: 800mm Cooling: Water cooling (15L/min) Power Input Cable: 3m Protection Class: IP21 Dimensions (W/L/H): 1100mm x2500mm x 1750mm Weight: 740Kg

Condition: excellent (used), functionality: fully functional, nominal power at 50% duty cycle: 14 kVA, input voltage: 380 V, type of cooling: water, overall weight: 300 kg, welding power (max.): 40 kVA, arm spacing: 450 mm, total width: 450 mm, total height: 1,450 mm, total length: 1,100 mm, stroke length: 110 mm, input frequency: 50 Hz, Spot welding machine Soudometal SP14P maximum welding current at 50 ED: 14 ​​kVA max. welding power 42 kVA Electrode force: 30-200 DAN Electrode stroke = 30-110 mm Projection: 450 mm Mains connection 380V / 42A secondary current continuous current 1.85 kA; kA short-circuit current 12.5 kV; Electrode force: 30-200 DAN foot control Cooling water volume: 3 l/min Electrode arm Ø: 45 mm Electrode holder Ø: 25 mm Chjdpfx Alowkr Inofsd Machine weight: 300 kb kg Dimensions: 1250x1100x450 mm If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, Designed for high-capacity mining and quarrying operations, this stationary crushing and screening plant has a production capacity of 600–750 TPH. Equipped with a three-stage crushing system (Primary Impact Crusher + Secondary Impact Crusher + Vertical Shaft Impact Crusher) and multi-deck screening units, it delivers high efficiency while producing high-quality, cubical aggregates. According to the detailed engineering design, the plant consists of the following equipment: Main Equipment Feeding Group TB-60 Vibrating Feed Hopper 60 m³ capacity 2 × 11 kW motors 1400 × 2500 mm Wobbler Feeder 22 kW motor Automatic lubrication system 1000 × 5000 mm Wobbler Under Conveyor 5.5 kW motor Reversible operation PDK-1415 Primary Impact Crusher 355 kW main motor 3 kW auxiliary motor Designed for the primary crushing of soft and medium-hard stone TE-1848 Vibrating Screen Screen size: 1800 × 4800 mm 2-deck configuration 18.5 kW motor DMK-03 Secondary Impact Crusher Rotor size: Ø1120 × 1500 mm 315 kW main motor 3 kW auxiliary motor TE-2470 Vibrating Screen Screen size: 2400 × 7000 mm 4-deck configuration 2 × 30 kW motors VSI-1000 Vertical Shaft Impact Crusher Designed with 2 × 315 kW motors Produces high-quality cubical aggregates and premium manufactured sand TE-1650 Vibrating Screen Screen size: 1600 × 5000 mm 2-deck configuration Chsdpez Nhmyjfx Alfed 18.5 kW motor Conveyor Belt System Multiple belt conveyors throughout the plant with widths ranging from *650 mm to 1200 mm* and lengths from *5 m to 30 m* High-speed conveyors (126 dld) for efficient material flow Metal detectors and magnetic separators on selected conveyor lines for foreign material removal Belt-pulley drive systems with heavy-duty drum construction Control Cabin & Electrical System Central control cabin for complete plant operation Individual electrical panels with dedicated circuit breakers for each piece of equipment Total installed power: approximately 2,109.4 kW Why Choose This Plant? Continuous production capacity of 600–750 TPH Three-stage crushing system (PDK + DMK + VSI) for producing high-quality, cubical aggregates in the desired gradation Accurate product sizing with multi-deck vibrating screens (TE-1848, TE-2470, and TE-1650) Safe and clean production with conveyor lines equipped with metal detectors and magnetic separators Turnkey installation based on a detailed engineering design Customizable capacity and equipment configuration to meet specific customer requirements For more detailed technical information, pricing, and installation planning, please feel free to contact us.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, type of input current: AC, total height: 1,300 mm, total width: 600 mm, total length: 1,100 mm, input voltage: 230 V, overall weight: 150 kg, type of cooling: water, electrical fuse: 32 A, space requirement height: 1,300 mm, space requirement length: 1,500 mm, laser power: 200 W, input frequency: 50 Hz, laser wavelength: 1,064 nm, Equipment: documentation/manual, type plate available, Laser welding machine with 200 watts of laser power - Programmable spot diameter - Motorized focus adjustment - Includes rotary axis with three-jaw chuck - Machine (year of manufacture 2025) from our showroom with minimal operating hours - Lamp-pumped YAG laser - Spot welding machine for the finest welding tasks - For jewelry, optics, precision engineering, etc. - Welding spot from 0.1 to 3 mm - For practically all metals (steel, stainless steel, silver, gold, titanium, etc.) - Includes optical microscope (10x) - Additional CCD microscope with crosshair - Current, pulse width, repetition rate, and frequency adjustable on the control panel - Includes protective gas connection - Nd3+:YAG laser (metal cavity with xenon flash lamp) - Lamp-pumped Nd:YAG laser with 200 watts of power - External cooling - Power connection 230 volts / 32 amps Csdpfx Aloz Hwzmjfshd - German menu Machine dimensions approx.: Width: 60 cm, Height: 120 cm, Depth: 110 cm, Weight: approx. 150 kg

Condition: new, functionality: fully functional, fuel type: hybrid, overall weight: 42,000 kg, Year of construction: 2026, FTC-300 Tracked Cone Crusher is produced in the form of feeding bunker, generator, cone crusher and stock belt, respectively.FTC-300 Tracked Cone Crusher, which is moved with a remote control, successfully completes all the commands given by the user by moving on its tracks in all harsh climatic conditions and rough terrain. FTC-300 Crawler Cone Crusher, which is delicately designed and carefully manufactured for crushing stone, is the leading tracked crusher plant in the sector with its 42,000 kg weight and 150-250 T/H crushing capacity per hour. The Vibrating Feeder Bunker has been developed by our engineers in a user-oriented manner so that the crusher, on which it is positioned on FABO vibrating feeding hoppers, works with high efficiency. Vibration speed of FABO vibrating feeding bunkers can be adjusted manually with the automation system.This feature prevents the bunker from wearing out and provides the user with a longer and more efficient use. Cone Crusher Cone crushers are the crusher of the FTC-300 tracked crushing plant that can easily crush hard stones. The power transferred from the engine to the gear shaft is sent to the hub with gears. The crusher crushes the stones to pieces thanks to the core and concave inside. Standing out with its robustness and production capacity, the cone crusher ensures that the FTC-300 tracked crushing plant operates at maximum capacity thanks to its high rotor speed and robust gear structure. Stock Belts With its foldable structure, it minimizes the dimensions of the machine it is on. Optionally, the number and length of belts can be increased upon the request of the user. 10 mm EP 125 4-ply band rubbers moving on 4mm st 37 twisted sheet perfectly transport the aggregate coming out of the screen to the area desired by the user in the most efficient way.The belt tires, which are produced resistant to wear, will never let you down and offer many years of service life. Chedpsz Hbv Iefx Alfjd FTC-300 tracked crushing plant is controlled by a full automation system.Thanks to the automation system panel on the machine, the working mode of the machine can be adjusted.The operating principle of the machine can be easily adjusted according to the type of the material loaded by the user into the vibrating hopper.Many features such as crusher rotor speed, (Optional) bunker vibration speed can be adjusted with the automation system.

Condition: new, functionality: fully functional, power: 150 kW (203.94 HP), fuel type: electric, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Codpfsz Imktjx Alfehd FABO MJK Series are mobile type Jaw crushing plants that is suitable for especially hard and abrasive stones and other type of stones with hardness level is high such as basalt, granite, gabbro. This model is also suitable for concrete recycle projects or coal mining projects. TECHNICAL SPECIFICATIONS: -Bunker: 20m3 -Production Capacity: 180-320 Tons Per Hour -Crusher Type & Size: Jaw Crusher – 1100x850mm -Maximum Feeding Size: 800mm -Total Motor Power: 150 kW MJK-110 is a combination of: • Bunker(Hopper) • Vibrating Grizzly Feeder (bypass) • Primary Jaw Crusher • Folding type bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, load capacity: 1,500 kg, Equipment: documentation/manual, Used rotating device in very good condition. - Year of manufacture 2016, mobile, rotatable 360° for assembly, welding, etc. - One unit driven, the other unit rotates passively. - CE certified, with documentation. - Adjustable axle distance. - Max. component weight 1500 kg. Codoz S U Rdepfx Alfohd - Max. diameter 1600 mm. - Max. component torque 2080 Nm. - 2-hand operation. - Optional foot control. - Protection 16 A. - Own weight 670 kg. Like new. 2 units available for sale.

Condition: good (used), Year of construction: 1992, Used SAF welding manipulator Type 7HVPV Maximum capacity, flat/horizontal: 1000 kg Codpfxe Aa Abxs Alfohd Maximum capacity, angled/tilted: 650 kg (measured at a center of gravity distance of 200 mm from the plate) Dimensions of rotating table: ø 800 mm Includes 4 jaws.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 13 979, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, This Gernep Labetta 3/2/6 480 2A is a rotary cold glue labeling machine for glass bottles, manufactured by Gernep in 2007. It is currently in operation at a brewery and applies front and back labels at a rate of up to 5,000 bottles per hour. The machine was designed to handle two bottle formats: a 0.33 L custom bottle and a 0.5 L BBH beer bottle, and is supplied complete with format parts, spare parts, and glue pump units. Technical data: Cjdps Aa R S Sjfx Alfshd - Manufacturer: Gernep - Model: Labetta 3/2/6 480 2A - Year of manufacture: 2007 - Machine type: rotary cold glue (wet glue) labeling machine for glass bottles - Output: up to 5,000 bottles/hour - Labeling stations: 2 (station 1 – front label, station 2 – back label) - Bottle format: 0.33 L custom and 0.5 L BBH - Direction of operation: left to right - Control: Siemens TD 200 Available from March 2027.

Condition: excellent (used), Year of construction: 2022, operating hours: 80 h, functionality: fully functional, machine/vehicle number: 136088, Equipment: type plate available, MERKLE OptiMIG 351 KW | SET149942 | 350 A | TRANSFORMER | TOP CONDITION For sale is a high-quality, professional MIG/MAG welding system from the German manufacturer MERKLE. The system was purchased new in June 2023 and used only until February 2024. Overall, it has seen very little use, resulting in an exceptionally well-maintained condition. NO INVERTER – classic, robust transformer/rectifier technology! Ideal for professional metalworking companies, workshops, and industrial welding applications. TECHNICAL DATA • Manufacturer: Merkle Schweißtechnik, Germany • Model: OptiMIG 351 KW • Original set number: SET149942 Chsdet A I Rtspfx Alfod • Year of manufacture: 2022 • First purchase: June 2023 • Process: MIG/MAG • Welding current: 25–350 A • Duty cycle: 350 A at 60%, 300 A at 100% • Mains connection: 400 V, three-phase • Classic transformer/rectifier technology • Water-cooled welding torch • Integrated 4-roller wire feeder • Digital display • Compact, mobile industrial design SCOPE OF DELIVERY • Merkle OptiMIG 351 KW • Original Merkle welding torch SBT 504 W, 3 m, water-cooled • Integrated water cooling system • Harris gas regulator with two manometers • Welding wire spool with remaining wire • Existing connection cables and accessories as shown in the photos SPECIAL FEATURES • Quality product Made in Germany • Classic, proven transformer technology instead of an inverter • Used for only about nine months, very few operating hours • Exceptionally well-maintained condition • Powerful 350 A industrial system • Merkle OptiMIG 351 KW is now sold out in the manufacturer's shop • Original welding package with water-cooled torch • The new price of the model was last listed at Merkle at €6,019 including VAT. Commercial sale from the business assets of a machine trading company. Proper invoice with VAT shown. Collection possible by appointment. Shipping via freight forwarder on a pallet is possible for an extra charge and with the costs borne by the buyer. Inspection possible by appointment. High-quality German industrial welding technology in exceptionally well-maintained condition. Particularly interesting for buyers who are specifically looking for a robust, classic transformer welding system.

Condition: good (used), functionality: fully functional, power: 25.01 kW (34.00 HP), fuel type: diesel, fuel: diesel, gearing type: hydrostat, Year of construction: 2018, operating hours: 240 h, Equipment: all wheel drive, KÄRCHER MIC 34C Municipal utility vehicle equipped for winter maintenance, consisting of: - KÄRCHER spreading system - KÄRCHER KVS V-shaped variable snowplow with a maximum clearing width of 140 cm - Platform body A suction sweeper is also available at an additional cost! This KÄRCHER MIC 34C was manufactured in 2018, has only 240 total operating hours and 123 hydraulic hours according to the meter, and is in good overall condition with normal signs of wear and tear for this type of equipment. It is ready for immediate use and comparable to a new unit with an original price of €75,000! Chsdpfx Alo Ahq Tyofsd - Inspection/test drive is possible at any time - Shipping can be arranged nationwide, and the costs will depend on the distance! - We would be happy to have our leasing partner prepare an attractive leasing/financing offer for you!

Condition: new, fuel type: diesel, motor manufacturer: Kubota D1105-EF02, General information Year of manufacture: 2026 Field of application: Construction Weights Empty weight: 450 kg Functional Generator capacity: 15 kVA Dimensions of cargo space: 163 x 77 x 107 cm CE mark: yes Chsdo Ahvv Njpfx Alfjd Other information Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 38 l Production country: IT Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: used, Year of construction: 2026, table length 2000 mm table width 1000 mm table height 900 mm weight of the machine ca. 0,2 t dimensions of the machine ca. 2,0x 1,0 x 0,9 m Siegmund Welding Table with Steel Plate - Frame made of aluminum profiles - Working height: 900 mm - Perforated plate: high-quality S355J2+N steel, plasma-nitrided and BAR-coated - Borehole diameter: 16 mm Chede Ahzh Sspfx Alfod - Borehole grid: 50x50 mm - For clamping: manual clamping bolt 160514

Condition: refurbished (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 523570, total width: 2,000 mm, total length: 3,500 mm, total height: 800 mm, protection type (IP code): IP42, overall weight: 4,830 kg, input voltage: 151 V, STEINERT Overband Magnet DMS 4 Z 130 180/151 S – 4,830 kg – Year of Manufacture 1995 For sale is a used STEINERT overband magnet for the magnetic separation of ferrous metals from bulk materials and material flows. The overband magnet from the renowned manufacturer STEINERT is particularly suitable for use in recycling and processing plants, construction waste processing, and in the scrap and waste management industries. It offers an interesting option for supplementing existing conveying and sorting systems. - Duty cycle: 100% - Weight: approx. 4,830 kg The overband magnet is offered as a used item. Information on complete functionality cannot be conclusively confirmed at this time. An inspection is possible after prior arrangement. If you are interested or have any questions, please do not hesitate to contact us. Chjdpfx Ae Afubnslfed

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Rated power at 50% duty cycle: 25 kVA Max. welding power: 107 kVA Adjustable reach: 140–500 mm Welding specifications – Steel: 6 + 6 mm Brass: 3 + 3 mm Aluminium: 1.2 + 1.2 mm Adjustable electrode force: 17–278 daN Cooling water flow rate: 4 l/min Weight: 240 kg Welding control unit: DALEX MPS 1036 Operating instructions and electrical diagrams are available Code Ahw Upjpfx Alfshd Working stroke triggered by pneumatic foot pedal Well-maintained condition

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, total height: 4,500 mm, total width: 7,200 mm, total length: 8,500 mm, temperature: 35 °C, energy consumption: 300 kWh, Equipment: documentation/manual, For sale are three unused heat pump vacuum evaporators from Blue Water Plants, manufactured in 2020. The units were delivered for concentrate thickening at a biogas plant in southern France, were preserved at the factory, and have never been operated productively. The evaporators can be purchased individually or as a package. Scope of delivery: 1x Main evaporator, distillate output approx. 55 m³/day 2x Evaporator Type 12,000, distillate output each approx. 12 m³/day Total capacity in combination: up to approx. 79 m³/day Cjdpfx Alsyr H Ansfjhd Operating principle: The evaporators operate under vacuum at a low boiling temperature. An integrated heat pump recovers the evaporation heat, which is why the energy requirement is significantly lower than with conventional thermal evaporation. The wastewater is separated into two streams: a distillate with low residual load and a thickened concentrate with a greatly reduced volume. An integrated acid reaction binds ammonia as an ammonium sulfate solution. This solution can be used as a liquid nitrogen fertilizer. Typical applications: Biogas plants: Treatment of fermentation residue and digestate, recovery of nitrogen as ammonium sulfate fertilizer, reduction of storage and application volume Composting and waste treatment plants: Thickening of leachate from storage areas and composting processes Agriculture: Volume reduction of slurry and storage basin water, nutrient recovery Food and beverage industry: Thickening of organically contaminated process wastewater, for example from dairies, breweries or juice and vegetable processing Concentrate treatment: Further thickening of concentrates from reverse osmosis or membrane filtration with organic and nitrogenous loads Reduce disposal costs: Instead of disposing of the entire wastewater externally, only the thickened concentrate is now disposed of. The distillate can be reused or discharged after further treatment. Not suitable for: The evaporators are designed for organically and ammonium-contaminated wastewater. They are not intended for saline water such as seawater, brine, drilling fluids, reservoir water or heavily chloride-contaminated industrial wastewater. High salt and chloride loads lead to crystallization and scale formation on the heat exchanger surfaces and increase the risk of corrosion. For such applications, RIEFILT offers suitable alternatives on request. Note on distillate quality: Depending on the inflow, the distillate may contain residual levels of ammonium and COD. For discharge or reuse, RIEFILT offers suitable post-treatment via reverse osmosis. Peripherals (optional): Acid module 20 m³ (H2SO4), pH reactors, adiabatic cooling tower 47 m³/h Documentation: Process flow diagram incl. tank, pump and dosing list, technical documents and CE conformity declarations. Photos available on request. Conditions: Sale exclusively through RIEFILT GmbH. EXW South France, FCA/DAP on request. Inspection by appointment. Price on request.

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 75 bar, total height: 2,800 mm, total width: 2,500 mm, total length: 12,000 mm, temperature: 38 °C, operating pressure: 75 bar, energy consumption: 60 kWh, Equipment: documentation/manual, Containerized, two-stage high-pressure reverse osmosis system for landfill leachate, liquid waste, and saline industrial wastewater. The system is designed for a conductivity of up to 35,000 µS/cm and a COD of up to 10,000 mg/l. It is overhauled and tested with brine solution at the factory before delivery. The FAT protocol is included in the scope of supply. PERFORMANCE DATA (Design 35 mS/cm, 20 °C) - Feed: max. 8.33 m³/h or 200 m³/day - Permeate: 5.0 m³/h or 120 m³/day (60% recovery, higher with lower salt load) - Concentrate: 3.33 m³/h or 80 m³/day - Conversion to approx. 10 m³/h permeate possible (upon request) STAGE 1 (WASTEWATER STAGE) - 30 ST+-Spacer-Tube modules with open channel, fouling-tolerant - 795 m² membrane area - 2 frequency-controlled high-pressure pumps, operating pressure 60 to 70 bar, max. 75 bar Cedpfx Ae Ahpltolfshd STAGE 2 (PERMEATE STAGE) - 6 ST+-Modules, 159 m² membrane area - 1 frequency-controlled high-pressure pump, max. 75 bar - Concentrate is returned to stage 1 EQUIPMENT - Automatic double multi-layer filter with backwash - Cartridge filter with differential pressure monitoring - Acid dosing for pH adjustment, antiscalant dosing station 100 l - Dosing stations for alkaline and acidic cleaner, 250 l each - Integrated chemical cleaning (CIP) - Degassing and blower station for the permeate, permeate tank for outdoor installation - Pipelines: low-pressure PVC, high-pressure stainless steel 1.4571 - PLC with panel PC, data logging and remote access - Insulated 40-ft container with separate, segregated switchgear room - Module crane, heating, lighting, ventilation, emergency shower, hand washing basin - Components: Grundfos, GEMÜ, GF Piping Systems, CAT Pumps, EMZ - Documentation (mechanics, electrical, R&I, layout) and operating manual in English APPLICATIONS Landfill leachate, liquid waste treatment, industrial wastewater with high salt and COD load, concentrate reduction before evaporators, rental and emergency applications. OPTIONAL (not included in the scope of supply) Transport, installation, commissioning, training, raw water tank and feed pump, ion exchanger or activated carbon for post-treatment. CONDITIONS Purchase or lease-purchase over up to 36 months. Warranty 6 months from commissioning on the overhauled components. Service support (remote monitoring, membrane management, spare parts) as a separate package. Binding statements on permeate quality after submission of your water analysis.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 20245200040, arm reach: 1,300 mm, load capacity: 12 kg, type of cooling: water, This listing includes a complete package with a robot and welding equipment. No additional hardware or software is required to start automated welding immediately. The robot has been used in our company as an experimental and testing unit. To this end, the unit was mounted on a mobile cart + table + linear travel axis. As a certified dealer (Cobot Welding Partner), we can provide comprehensive support for cobot welding, tailored to your needs. This includes installation, employee training, and part programming. The price and scope of delivery of the package can be adjusted upon request. Currently, the welding power source is fully equipped and includes all arc welding processes and material characteristics offered by Lorch. The welding software installed on the robot has basic features. This means that the welding power source is fully integrated into the teach panel via its bus system. This function is called "Cobotronic" and is explained in more detail on our website. All software functions can be offered and upgraded as needed. All functions are demonstrated and explained on our website. Scope of delivery: - Universal Robots UR10e (identical to UR12e) - Lorch pulse welding machine, S5-RoboMIG XT (fully equipped) - Lorch programming software "Cobotronic" (full integration of welding parameters into the robot panel's user interface) - Mounting plate for 16" and 28" welding tables - Torch holder mast incl. balancer for hose package - MIG - water-cooled hose package 3.5 meters, torch holder and torch neck - Ground cable Chjdpfxs Ahm Hdo Alfsd The linear travel axis and welding table can be offered optionally and are not included in the current offer price.

Condition: refurbished (used), Year of construction: 2010, functionality: fully functional, working width: 2,500 mm, welding power (max.): 500 kVA, wire diameter (max.): 10 mm, type of input current: three-phase, mesh size: 2,50,02,500 mm, continuous power (apparent): 500 kVA, The VARO SARG-2500 is an automatic line designed for the production of welded wire mesh for fencing applications, equipped with medium-frequency welding technology. The machine is designed to process mesh panels up to 2,500 x 2,500 mm, using longitudinal and cross wires with diameters ranging from 3.0 to 8.0 mm. The minimum adjustable pitch is 30 mm for longitudinal wires and 10 mm for cross wires. The welding system consists of 12 welding heads with double-stage pneumatic cylinders and 2 TECNA 250 kVA welding transformers, controlled by inverters. The production speed specified in the technical documentation is 70–90 welds/min. The line includes automatic loading of the longitudinal wires, an electronically controlled pushing system for feeding the wires into the welding station, and an automatic system for loading the upper and lower cross wires. Mesh advancement is electronically controlled by a brushless motor, with adjustable mechanical grippers. After welding, an electronically controlled carriage transfers the mesh to the next processing stage. The system is equipped with two hydraulic side trimming units for cutting the protruding wire ends. The line also includes a bending station with an hydraulic press, needed for the 3D panels. After bending, the finished mesh is automatically transferred to the unloading station and deposited onto a supporting table or pallet. Machine operation is managed through a dedicated electrical control cabinet with Siemens S7 PLC, PC and operator panel for setting and controlling the production cycle parameters. Main Technical Specifications • Manufacturer: VARO • Model: SARG-2500 • Maximum mesh size: 2,500 x 2,500 mm • Longitudinal wire diameter: 3.0–8.0 mm • Cross wire diameter: 3.0–8.0 mm • Minimum longitudinal wire pitch: 25 mm, adjustable • Minimum cross wire pitch: 10 mm, adjustable • Number of welding heads: 12 Chodpfxj Ahnkds Alfjd • Welding transformers: 2 x TECNA 250 kVA three phases • Welding speed: 70–90 welds/min • Power supply: 400 V / 50 Hz • Hydraulic bending press: yes • Control system: Siemens S7 PLC + PC • Cross wire loading: Upper and lower • Side trimming: 2 hydraulic trimming units • Mesh feeding: Electronically controlled, brushless motor

Condition: used, mileage: 5,55,466 km, power: 353 kW (479.95 HP), first registration: 03/2012, fuel type: diesel, number of seats: 93, gearing type: automatic, color: other, brakes: retarder, Equipment: ABS, air conditioning, cruise control, = Additional options and equipment = - DVD player - Air conditioning - Front refrigerator - Sleeper cabin - Toilet - Webasto auxiliary heater Codoz Hbl Nepfx Alfohd = Further information = Height: 400 cm Damage: none = Company information = We are an international company based in Belgium, located in the Brussels area (+/-20 km). Belgian Bus Sales is your ideal partner for the purchase and sale of used buses, offering a spacious parking lot used as a showroom. We always have a wide selection of buses from all brands, capacities, models, and at every price level in stock. We can find the right coach, school, or city bus tailored to your needs and budget. All information provided without guarantee. Subject to error, prior sale and typographical mistakes. Viewing hours for used buses: Mon.-Fri.: 08:30 - 12:00, 12:30 - 17:00. Mowimy po Polsku (Agata). We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski and more.

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 82397, type of input current: three-phase, welding current (max.): 420 A, Equipment: type plate available, MERKLE Insquare W 421 AC/DC water-cooled TIG welding system Manufacturer: MERKLE Model: Insquare W 421 AC/DC Year of manufacture: 2012 Serial number: 82397 Description For sale is a powerful AC/DC TIG welding system from MERKLE with water cooling. This system is suitable for professional welding applications on steel, stainless steel, aluminum, and other non-ferrous metals. The AC/DC technology allows for both DC and AC welding, covering a wide range of applications. With a welding current of up to 420 A, the system is ideal for industrial use in metal, tank, plant, and pipeline construction. The water cooling ensures continuous and reliable operation, even at high welding currents. Technical data Manufacturer: MERKLE Type: Insquare W 421 AC/DC Year of manufacture: 2012 Welding current range: 5 – 420 A AC frequency: 50 – 200 Hz Open-circuit voltage: 80 V Mains connection: 400 / 415 V, 50 / 60 Hz, 3~ Duty cycle at 40 °C: 420 A at 40 % 360 A at 60 % 310 A at 100 % Protection class: IP23 Water cooling Standard: EN 60974-1 Scope of delivery Cjdpfxszamffj Alfohd MERKLE Insquare W 421 AC/DC Water cooling TIG torch Ground cable Foot pedal All information is subject to change without notice.

Year of construction: 1988, condition: used, Offered is a high-frequency welding press with film feed. Equipped with: press unit, hydraulic power unit with electric motor, control panel with switches and indicator lights, worktable with film guide, side-mounted roll holders, film unwinding unit and separate electrical cabinet. Inspection possible by appointment. Codpfxs Adt Eij Alfehd

Condition: new, mileage: 27 km, power: 566 kW (769.54 HP), first registration: 01/2027, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, electric window regulation, fog lights, fridge, navigation system, parking air conditioner, parking heater, retarder, second fuel tank, soot filter, spoiler, = Additional Options and Accessories = - Aluminum fuel tank - Roof spoiler - High beam headlights - Television - Alloy wheels - Air suspension - Particle filter - Radio/CD player - Sleeper cab - Side skirts - Sun visor - Auxiliary heater - Xenon headlights = Notes = Coming soon; Scania 770S Highline NEW - Full specification! - Leather - Full air suspension - Retarder - Navigation - Night climate control Year of manufacture: 2027 - New Mileage: 27 New truck Full specification Leather Navigation 2x tank Full spoilers Night climate control Alloy wheels Full air suspension Retarder Etc. = Further Information = General Information Year of construction: 2027 Technical Information Number of cylinders: 8 GVWR: 19,000 kg Transmission Transmission: Opti Cruise, 12 gears, automatic Axle Configuration Suspension: Air suspension Front axle: Alloy wheels; Steered; Tire tread depth left: 100%; Tire tread depth right: 100% Rear axle: Dual tires; Alloy wheels; Tire tread depth left inner: 100%; Tire tread depth left outer: 100%; Tire tread depth right inner: 100%; Tire tread depth right outer: 100% Chedpo Ah Ricjfx Alfod Functional Body manufacturer: Scania Condition Overall condition: very good Technical condition: very good Optical condition: very good

Condition: used, Binder BINDER KB 720 Cooling Incubator with P Plus Package – Battery Test Chamber, EUCAR 5, CO₂ Extinguishing System Device description: For sale is a BINDER KB 720 (E6) cooling incubator, manufactured in 2022, equipped with the extended safety and performance test package "P Plus". This device is not a standard laboratory incubator, but a high-quality safety test chamber, specifically designed for aging, performance, and safety tests of lithium-ion energy storage systems. Special added value: The device is designed to safely detect, monitor, and contain critical battery events – up to EUCAR hazard level 5 (fire/flames, no explosion). What can the device do specifically? (Point 2 – Performance & Application) Performing aging tests on lithium-ion cells Performance tests (charge/discharge cycles at varying temperatures) Temperature endurance tests and temperature change tests Tests of unpowered and cyclically powered cells Reproducible, precise temperature control throughout the usable space Safe execution of tests under realistic thermal conditions Test environment for R&D, automotive, e-mobility, and energy storage technology Suitable for: Battery & cell manufacturers Research and development laboratories Testing laboratories & safety testing Automotive / e-mobility / energy storage The P Plus package turns the KB 720 into a genuine battery safety test chamber: Integrated safety functions: Automatic & manual CO₂ fire extinguishing system Smoke detector with optical & audible alarm Mechanical double-door locking system (secure containment) Spark protection in the interior Exhaust port with reversible overpressure valve Connections for external inertization (e.g., nitrogen) Emergency stop / manual triggering of the extinguishing system Feedthrough openings for charging and measuring cables Result: Cedpezizr Rsfx Alfjhd The device is designed for tests on lithium-ion cells up to EUCAR hazard level 5, where fire or flames may occur without resulting in an explosion or uncontrolled propagation. Not an abuse or destruction test device, but a safe, standard-compliant test chamber for real operating and failure scenarios. Technical key data: Temperature range: -10 °C to +100 °C Interior volume: approx. 698 liters Inserts: 4 x stainless steel Max. load per insert: 45 kg Max. total load: 100 kg Electrical data: Mains connection: 200–240 V AC Frequency: 50 / 60 Hz Phase: 1-phase Power consumption: approx. 2.1 kW Fuse rating: 16 A Refrigerant: R134a Protection class: IP 20 Dimensions & weight: External (W × H × D): approx. 1250 × 1950 × 900 mm Internal (W × H × D): approx. 970 × 1250 × 576 mm In short – why this device is special genuine battery safety test chamber suitable for EUCAR hazard level 5 integrated CO₂ extinguishing system large chamber (≈700 l) high market & resale value Weight: approx. 285–300 kg Documents & Downloads Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.