Used Defect for sale (1,074)

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Bljdpfx Aozizkysktjp Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: defective spare-parts repository (used), machine/vehicle number: IC1379, Year of construction: 2021, operating hours: 269 h, load capacity: 2,500 kg, lifting height: 4,520 mm, fuel type: gas, mast type: triplex, Equipment: 3rd hydraulic function, 4th hydraulic function, Fuel injection problem, wires are not on their place Bedpezp Uanofx Aktjlp Serial Number: B1601BY00044 Fuel injection problem, wires are not on their place

Condition: used, Year of construction: 2001, functionality: limited functionality, overall weight: 250 kg, Eisele VMS350-PV: The safety switch for the protective cover on the machine is defective; the rest of the machine functions perfectly. Blodpfxe Ahhkrs Aktjp Coolant is supplied via a pump for additional minimum-quantity lubrication. Additionally, there are 3 roller conveyors. For sale due to business closure. No guarantee. Excluding liability for material defects.

Condition: used, power: 13 kW (17.68 HP), first registration: 01/1997, fuel type: diesel, empty load weight: 2,600 kg, color: grey, gearing type: mechanical, suspension: other, number of seats: 1, Year of construction: 1997, operating hours: 4,728 h, Equipment: cabin, rubber tracks, Quick-change system, wagon number 3452, Yanmar B22-2A mini excavator, year of manufacture: 1997, operating hours: 4,728, fully enclosed cab with fan, 1x 300mm digging bucket, 1,400 mm dozer blade, 300mm rubber tracks, hydraulic connections for attachments, mechanical quick coupler, ROTARY MOTOR DEFECTIVE!! For inquiries, please contact or . Errors and prior sale are subject to change. Bljdpe Agggcofx Aktep

Condition: used, mileage: 5,38,734 km, power: 265 kW (360.30 HP), first registration: 07/2007, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 6x4, wheelbase: 4,900 mm, fuel: diesel, gearing type: automatic, emission class: euro4, suspension: steel, total length: 9,270 mm, total width: 2,500 mm, Equipment: ABS, AdBlue, = Additional options and accessories = - 6x4 - Aluminum fuel tank = Further information = Front axle: Tire size: 385/65R22.5; Steerable; Tire tread depth left: 25%; Tire tread depth right: 25%; Suspension: Leaf spring suspension Rear axle 1: Tire size: 315/80R22.5; Dual tires; Tire tread depth left inside: 25%; Tire tread depth left outside: 25%; Tire tread depth right inside: 25%; Tire tread depth right outside: 25% Rear axle 2: Tire size: 315/80R22.5; Dual tires; Tire tread depth left inside: 25%; Tire tread depth left outside: 25%; Tire tread depth right inside: 25%; Tire tread depth right outside: 25% Blods Ahn Rcspfx Aktsp Unladen weight: 9,206 kg Payload: 16,794 kg GVWR: 26,000 kg Damage: none

Condition: repair required (used), Year of construction: 2025, functionality: limited functionality, machine/vehicle number: 24163 / 24191, Bakery Machines For sale as: used and partially damaged/contaminated – no warranty, no guarantees, sold as is, “as is, where is” Depositor + accessories & topping applicator + cleaning cart Manufacturer: bmTEC Machine specifications: see downloadable PDF Condition: used/damaged, in operation from early 2025 to early 2026 Damage to the “Depositor”: Only the “Depositor” is mechanically damaged. During loading, the “Depositor” tipped over to the side and fell to the floor. The frame of the “Depositor” is bent. The gap dimensions vary considerably. Inside, residues from rodents and dirt are visible due to storage. In the area of the product inlet, a compression of the frame can be seen. One of the conveyor belts shows no tension. Inside one of the installed control cabinets, a plastic cover and a screw are lying loose. The “Topping Applicator”, which is controlled via the “Depositor” and the control cabinet installed there, shows no visible defects other than the usual signs of wear. However, soiling is also visible here. No visible irregularities can be seen on the sheets belonging to the machine and on the cleaning cart. Sales basis: loaded onto a truck at the location 83562 Rechtmehring Blodpfx As Afmqhoktop

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Good morning, I am offering for sale a Felder F900Z Z vertical spindle milling machine. The machine is in VERY GOOD CONDITION – it has been used sparingly. It is robust and ideal for precise wood processing. Its condition can be seen in the photos; it is ready for use and has no hidden defects. Bodjz R R Ttopfx Aktslp Please contact me.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, operating hours: 50 h, Fimal thickness planer, manufactured in 2022, in like-new condition. The machine has been used for a maximum of 50 hours. Therefore, it is in very good condition! Working width: 63 cm Electric table adjustment Includes new Tersa replacement blades. Optionally, a matching Fimal PF530N jointer, manufactured in 2022, can also be purchased. See the last pictures. - Thickness planer Fimal S63A (individual price: €7,500) - Jointer Fimal PF530N (individual price: €6,500) Total price for both machines together: €12,500 Optionally, a suitable dust extraction system can also be purchased. The machine can, of course, be inspected and thoroughly tested while powered on. The sale is to commercial businesses with exclusion of liability for defects. No guarantee, warranty or right of return. Bljdez S Ulzspfx Aktjp

Condition: used, Vickers Type: HVS 1000 The digital micro-Vickers hardness tester HVS 1000 features a unique and precise design in the areas of mechanics, optics, and light source, and is capable of producing a clearer image of the indentation, resulting in more accurate measurements. Main purpose and scope of application: 1. Iron and steel, non-ferrous metals, metal foils, hard alloys, sheet metal, microstructures 2. Carburized, nitrided, and decarburized layers, surface hardening layers, plating, coatings 3. Glass, wafers, ceramic materials Specifications: Model HVS1000 Type Digital micro-hardness tester Test forces (N) 0.098 / 0.246 / 0.49 / 0.98 / 1.96 / 2.94 / 4.90 / 9.80 Test forces (Kgf) 10 / 25 / 50 / 100 / 200 / 300 / 500 / 1000 Load control Automatic loading and release Objective-indenter turret Manual Dwell time (s) 0~60 Microscope magnification x 400x for measurement, objective 40x, eyepiece 10x 100x for observation, objective 10x, eyepiece 10x Micrometer resolution (μm) 0.01 Test range 5 HV~3000 HV Dimensions of the XY test table 100X100 mm Travel range of the XY test table 25X25 mm Max. specimen height 120mm Blodpfx Aozgbr Sektsp Max. specimen width 110mm Hardness conversion HK, HRA, HRB, HRC, HRD, HR15N, HR30N, HR45N, R15T, HR30T, HR45T, HV, HBW Output Built-in printer, RS232 interface Power 220V, 60/50Hz Dimensions (mm) 441 x 270 x 480 Net weight (/ kg) 35 Condition: used / defective, for spare parts Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Oxford Instruments   Oxford Instruments X-Strata 960 X-ray Fluorescence Analyzer – for spare parts / defective   Item Description:   For sale is a used X-ray Fluorescence Analyzer, type Oxford Instruments X-Strata 960. The unit comes from a laboratory decommissioning and is offered exclusively as a source of spare parts or for repair purposes. No functional testing has been performed – therefore, the unit is considered defective for the purposes of this sale.   Technical Data – Oxford Instruments X-Strata 960 (non-binding)   Feature Description Model X-Strata 960 Manufacturer Oxford Instruments Analysis Method X-ray Fluorescence Analysis (XRF) Application Areas Coating thickness measurement, material analysis, precious metal testing Measurement Geometry Top- or bottom-irradiating, depending on configuration Radiation Source X-ray tube (e.g., rhodium anode), 50–100 W power Detector Proportional counter or silicon drift detector (SDD), depending on version Measurement Range Coating thickness approx. 0.005 – 50 µm (material dependent) Blodpjzdzifofx Aktep Spot Size approx. 15 μm – 1 mm (depending on collimator) Z-Axis Motorized, adjustable up to approx. 230 mm measurement height Sample Chamber (W × D × H) approx. 580 × 510 × 230 mm Sample Table Manual or motorized (200 × 200 mm or larger, depending on equipment) Focusing System Optical / laser focus, partially automatic Operating System Integrated industrial PC with Windows-based evaluation software Voltage Supply 220–240 V / 50–60 Hz / approx. 500–800 W Unit Weight approx. 150–200 kg (depending on version)   Condition: used / defective / for spare parts   Scope of Delivery: as shown in the images – without accessories or software   Important Notes:   Sold expressly as a defective unit without any warranty of functionality. The item is offered as a source of spare parts or for hobbyists. No warranty on function, completeness or technical parameters.   Commercial sale with exclusion of any liability for defects, in accordance with § 447 BGB (distance selling contract).   Scope of Delivery:   Oxford Instruments X-Strata 960 All components visible in the images Other parts, accessories or documentation are not included, unless explicitly stated.   Shipping & Pickup:   Pickup possible and preferred in Borken Shipping possible upon agreement.   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: repair required (used), Year of construction: 1996, operating hours: 444 h, Atlas Copco GA 7 Rotary Screw Compressor – 7.5 kW – Year of Manufacture: 1996 Sale on behalf of a customer! For sale is a used rotary screw compressor from the renowned manufacturer Atlas Copco, model GA 7, built in 1996. Bledpe Adu H Usfx Aktop The compressor has been in storage for a very long time. For this reason, it is being sold as defective / for parts. Technical Specifications: • Manufacturer: Atlas Copco • Model: GA 7 • Year of manufacture: 1996 • Motor power: 7.5 kW • Max. pressure: 7.5 bar • Delivery rate: 1,140 l/min • Control system: Elektronikon II • Displayed operating hours: 444 h • Condition: Used Important note regarding operating hours: The original controller was replaced with a different unit. Therefore, the currently displayed 444 operating hours cannot be verified as the actual total runtime of the compressor. The actual total operating hours are unknown.

Year of construction: 2003, condition: defective spare-parts repository (used), functionality: not functional, Cieffe hardening oven The heating is partially broken and needs to be repaired. The oven is half disassembled. You are welcome to come by for a viewing by appointment. Bedpfxev Dlkkj Aktslp

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 08120055, workpiece weight (max.): 227 kg, travel distance X-axis: 440 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 410 mm, TECHNICAL DETAILS Travel range X-axis: 440 mm Travel range Y-axis: 500 mm Travel range Z-axis: 410 mm Max. workpiece weight: 227 kg Table height: 930 mm MACHINE DETAILS Last overhaul: 2025 Last calibration and maintenance: 09/09/2025 Calibration and measurement protocols: available Operating manual: available on CD Dimensions & Weight Dimensions (L x W x H): 1,030 x 1,160 x 2,320 mm Total weight: 293 kg Input voltage: 220 V Input current type: Alternating current (AC) EQUIPMENT PC-DMIS Pro for Windows Version 4.2 MR4 Release Software, legally transferable Renishaw MH20i measuring head with TP-ES probe system EM1 extension module, length: 70 mm TP20 SF probe module with standard probing force TP20 EF probe module with high probing force Functional HP computer Additional Renishaw Brown & Sharpe TP-ES measuring head, functional Bodps Afhtqsfx Aktslp Several probe extensions Various probe tips The scope of delivery also includes a TESA Star-i measuring head and a Renishaw MIP measuring head. The TESA Star-i measuring head is defective. The Renishaw MIP measuring head is likely defective. However, the machine itself is equipped with the fully functional and even higher-quality Renishaw MH20i with TP-ES probe system and is therefore immediately ready for use.

Condition: good (used), Year of construction: 2003, machine/vehicle number: 694/0-302 (2003), functionality: fully functional, operating hours: 2,580 h, power: 12 kW (16.32 HP), workpiece height (max.): 48 mm, workpiece width (max.): 60 mm, edge thickness (max.): 15 mm, height adjustment type: electric, feed rate X-axis: 11 m/min, overall weight: 2,000 kg, Equipment: documentation/manual, Holzher Sprint 1417, manufactured in 2003 - Can also be operated separately without Ligmatech - - Ideal for high-quality furniture production; HPL and matte decors are no problem - Machine completely controlled by PLC, almost everything can be adjusted at the control panel; no defects; well-maintained machine used with expertise. Leuco Z3 edge trimming cutter installed; a second set of cutters is available, along with various insert blades. Panel thickness max. approx. 48 mm; edge banding from 0.3-15 mm possible. Chain conveyor renewed approximately 10 years ago. Spray system for separating and cleaning agents, controlled according to application. - Jointing fence, motor-driven, program-controlled. - Edge trimming spindles 1961, 2 x 2.0 kW. - Glue system, cartridge 1906, with sensing nozzle (important), cartridge magazine for 4 cartridges, color change easily possible, PU also possible. - Pressing unit 1903 MOT, pressure of 1st and other rollers adjustable separately. - Miter saws 1918, bevel cuts adjustable. - Flush trimming 1823. - Radius trimming 1942 MOT (one axis motor-adjustable for 1 and 2 mm edges, selectable at the control panel). - Profile trimming blade 2 mm 1929, pneumatically timed. - Corner copying unit 1983, carbide, with adjustment at the control panel, functional, but needs fine adjustment. - Straight trimming blade 1964. - Oscillating unit, controlled according to application. Includes all operating manuals, documentation of process points digitally and in printed form by Holzher technicians. One set of DIA edge trimming cutters is included, as well as various insert blades for the trimming units. Chip transport system ZHR 15 Boomerang, manufactured in 1995 Mounted on the machine with connection to the pressing bridge, easily adjustable from the front panel, with rotating device for parts. Adjusted to the feed rate; sensors still available from HOMAG. Blodoz Dxh Nepfx Aktjp - Information without guarantee; the parties agree that the sale of the used machine takes place with complete exclusion of any warranty, guarantee, and liability for defects. The buyer has inspected and tested the machine before purchase. - Sale only to commercial businesses; machine is currently powered and in operation. Price is negotiable. Machine available after clarification in December/January 2027. Crane or forklift loading also possible from an external warehouse.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, rotary table diameter: 450 mm, position of the milling head: Schwenkbar (45°), table diameter: 450 mm, total length: 5,600 mm, gear diameter: 500 mm, total height: 3,100 mm, total width: 3,600 mm, input frequency: 50 Hz, type of input current: three-phase, spindle speed (max.): 340 rpm, table bore: 125 mm, spindle speed (min.): 80 rpm, travel distance X-axis: 325 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, overall weight: 14,800 kg, distance table to spindle center: 350 mm, tool diameter: 200 mm, controller manufacturer: Siemens Sinumerik 840D sl, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, A Pfauter PE 500 for the economical production of straight and helical spur gears up to module 12 and 500 mm in diameter – completely overhauled by SerWeMa with Siemens Sinumerik 840D sl, equipped with a gripper unit and a 32-position workpiece storage for unmanned operation. The machine is ready for operation in our hall in Chemnitz: you can inspect it under power, and if desired, we will mill your own sample part and you can take delivery of the machine here. No delivery time, no risk. Sold by Serwema Retrofit Solutions, the company that carried out the overhaul and knows the machine inside out. The general overhaul included complete geometric overhaul by grinding and scraping, new roller bearings in the main drive and in the milling head, measuring and reconditioning the worm gear, overhauled or new ball screw drives, overhaul of hydraulics, lubrication and coolant system, and new electrical equipment with Sinumerik 840D sl, Sinamics S120 and new axis motors. An electronic generating gear controls all generating and single-part machining processes, and an NC-controlled crash recovery protects the tool and workpiece in the event of a power or phase failure. New paint in RAL 7035/5015 with oil and coolant resistant two-component paint, acceptance of geometry according to SerWeMa protocol based on DIN ISO 6545. The machine controls six CNC axes: X radial, Y tangential, Z axial, A milling head swivel, B milling cutter drive and C table drive. The SerWeMa gear cutting software guides you through workpiece and tool data via masks, without the need for programming: up to three position-oriented gearings per workpiece, each with its own tool, up to three cuts per gearing with simultaneous or counter-rotating movement, form corrections for convex, conical and convex-conical profiles, lead-in and lead-out phase correction, chamfer milling, dimension correction via tooth width, two-roll or two-ball gauge, measuring stop, shift strategy with defect management per generating cutter and cutting force monitoring with automatic retraction. Technologies: generating milling, single-part milling and worm gear milling both radially and tangentially. A hand-held device with a handwheel allows setup directly in the working area. Technical data: max. workpiece Ø 500 mm, max. module 12, max. milling cutter Ø 200 mm, max. milling cutter length 240 mm, shift travel 200 mm, milling cutter speed 100–450 rpm, swivel angle +25°/−45°, travel radial 325 mm (axis distance 25–350 mm), travel axial 400 mm (310–710 mm), table diameter 450 mm, table bore 125 mm, connection power approx. 60 kVA. Installation dimensions incl. automation approx. 7.2 × 4.5 × 3.3 m, weight approx. 16.8 t. Bedpfx Akjz Et E Eetslp Equipment: machine enclosure, chip conveyor, gripper unit with two grippers, workpiece storage with 32 positions, preparation for emission extraction (150 mm nozzle, Harting connector on the machine roof). Documentation complete in German: operating manual, electrical diagrams with parts lists, hydraulic and lubrication diagrams. Serwema optionally offers: trial part milling in our factory, additional milling arbors, assembly and commissioning at your location, operator training and a control system upgrade to Sinumerik ONE. Spare parts and service come from a single source, worldwide, even after the purchase.

Condition: used, mileage: 5,50,000 km, power: 190 kW (258.33 HP), first registration: 02/2012, fuel type: diesel, axle configuration: 4x2, wheelbase: 6,200 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, emission class: euro5, total length: 10,050 mm, Equipment: ABS, EBS, air conditioning, central locking, cruise control, electric window regulation, spoiler, traction control, = Additional Options and Accessories = Blode Ad Ihrspfx Aktsp - Leaf spring suspension - Brake booster - Roof spoiler - Remote central locking - Speed limiter - Radio/CD player - Radio/cassette player - Side door - Sun visor - Stability control = Additional Information = Year of manufacture: 2012 Front axle: Steerable Engine displacement: 7,146 cc Unladen weight: 5,826 kg Payload: 12,164 kg GVW: 17,990 kg

Condition: excellent (used), Very well-maintained Cursal 6000/250 mm cross-cut saw operates either with marking chalk as a defect cross-cut saw or as an optimizing cross-cut saw without length limitation. Bledpfx Aksynlnzjtjp

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 26050/2, Year of construction: 2009, operating hours: 10,207 h, load capacity: 3,000 kg, load center: 600 mm, fuel type: electric, mast type: triplex, empty load weight: 5,750 kg, Equipment: 3rd hydraulic function, 4th hydraulic function, UVV, clamp, lighting, sideshift, Equipment: Triplex mast with full free lift, load capacity: 3000 kg at LSP: 600 mm, overall height: 2250 mm, lifting height: 4705 mm, fork positioner with side shifter, opening max.: 1700 mm, min.: 310 mm, fork length: 1600 mm, semi-cabin, work lights at the front, battery 80V/775Ah, charger 80V/100A, SE tires (non-marking), operating manual included. Technical condition at the time of sale: Forklift truck has been technically overhauled! Major service newly performed! UVV inspection passed without any defects! Delivery: In perfect condition! 20 years of professional experience! INSPECTION AND TEST DRIVE: Available at any time during opening hours after prior arrangement: Monday to Friday. From 8:00 a.m. to 6:00 p.m. Saturday from 8:00 a.m. to 1:00 p.m. TRANSPORT: Low-loader or covered truck available at a reasonable price. Bljdpo Ahkv Njfx Aktjp

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 25030/3, Year of construction: 2008, operating hours: 5,181 h, load capacity: 2,500 kg, lifting height: 4,500 mm, load center: 500 mm, fuel type: diesel, mast type: mono, motor manufacturer: Perkins, gearing type: hydrostat, front tire type: pneumatic tires (air-filled), rear tire type: pneumatic tires (air-filled), empty load weight: 4,290 kg, Equipment: 3rd hydraulic function, cabin, lighting, sideshift, Equipment: Standard mast, overall height: 3000 mm, lifting height: 4500 mm, load capacity: 2500 kg at a load center of 500 mm, side shift, fork length: 1200 mm, road lighting according to STVZO (German Road Traffic Regulations), fully enclosed cabin with heating, turbo diesel engine, manual single-pedal transmission, 4 pneumatic tires. Blodps Af Aglofx Aktep Technical condition at the time of sale: Forklift truck has been technically overhauled! Major service recently performed! UVV inspection (German accident prevention regulation) passed without any defects! Delivery: In perfect condition! 20 years of professional experience! INSPECTION AND TEST DRIVE: Available any time during opening hours by prior arrangement: Monday to Friday. From 8:00 AM to 6:00 PM. Saturday from 8:00 AM to 1:00 PM. TRANSPORT: Low-bed trailer or covered truck available at a reasonable price.

Condition: defective spare-parts repository (used), Year of construction: 2021, operating hours: 981 h, machine/vehicle number: 101780.0, Defective Kaeser Aircenter SX 6 – 11 bar rotary screw compressor with integrated refrigeration dryer with 200-liter air receiver with Sigma Control 2 controller with Kaeser F6KE filter incl. ECO-DRAIN with Kaeser F6KA activated carbon filter The compressor is functional, but the screw airend makes loud noises. Therefore, the system is sold as defective / for parts. Year of construction: 11/2021 Operating hours: 981 h Max. pressure: 11 bar Rated power: 4.0 kW Free air delivery (FAD) at 10 bar: 0.49 m³/min Sound level: 61 dB(A) Air outlet: 3/4" Air receiver: 200-liter capacity Pressure dew point (refrigeration dryer): + 3°C Condensate drain: level-controlled ECO-DRAIN Dimensions (L x W x H): 590 x 1090 x 1560 mm Bedpfx Aez Sz Tfsktolp Weight: 290 kg Convenient leasing options available for new machines via our house bank. Visit our retail store. We always stock a large selection of new and used compressors!

Year of construction: 2020, condition: excellent (used), functionality: fully functional, For sale: A Robopac Master Robot pallet wrapper in excellent condition. This mobile wrapper is ideal for efficiently and safely wrapping pallets of various sizes. The machine features a user-friendly control panel and operates on batteries, providing flexibility in use. Perfect for warehouses and production environments looking for a reliable and robust solution for pallet stabilization. The machine is well-maintained and ready for immediate use thanks to the new batteries. The charger is built-in. The wrapper was manufactured in 07-2020. Comes with an invoice. Bljds Agwxzopfx Aktop We can also supply wrapping film. For more information or a video of the wrapper, please feel free to contact us. Trade-in possible: Trade-in of a (defective) pallet wrapper is negotiable. Also, check out my other listings or contact me to see which wrappers we have in stock. Keywords: pallet wrapper, film wrapper, wrapping machine, pallet wrapping machine, wrap machine, robot wrapper, wrapping robot, robot wrapper, wrapper, film wrapper.

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 05/2016, total width: 2,470 mm, total height: 1,420 mm, suspension: air, tire size: 385/55-R22.5, wheelbase: 8,820 mm, Equipment: ABS, = Additional Options and Accessories = - BPW axles - EBS - Lift axle - Air suspension - Drum brakes = Notes = 2016 D-TEC PORTMASTER 45FT HC chassis with ABS/EBS, BPW axles with drum brakes, 1st axle = lift axle, extendable at the front and rear, 45 ft/40 ft/30 ft/20 ft/2x20 ft, unladen weight: 4,904 kg, permissible total weight: 43,000 kg, tires 385/55-R22.5 (L: 7/8/6 mm; R: 7/7/6 mm), Dutch registration WARNING: ABS module defective! = Further Information = General Information Year of construction: 2016 Registration number: OP-14-GV Axle Configuration Tire size: 385/55-R22.5 Axle brand: BPW Drum Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tire tread left: 45%; Tire tread right: 45% Rear axle 2: Max. axle load: 9000 kg; Tire tread left: 50%; Tire tread right: 45% Rear axle 3: Max. axle load: 9000 kg; Tire tread left: 40%; Tire tread right: 40% Weights Unladen weight: 4,904 kg Payload: 38,096 kg Bljdpo Ad Nngsfx Aktop GVW: 43,000 kg Functional Body brand: D-TEC PORTMASTER Extendable body: Yes Condition Technical condition: average Optical condition: very good Damage: none Further Information Please contact Arne Honingh for more information.

Year of construction: 2018, condition: used, functionality: fully functional, This is an SCC 61 WE combination steamer in an electric version, from the premium manufacturer Rational, manufactured in 2018. The combination steamer is a unit from the latest SCC series, featuring triple-glazed glass and LED lighting. The unit has undergone a thorough inspection in our in-house workshop and the combination steamer is fully functional. The base frame shown in the picture is not included in the offer, but can be purchased as an optional extra. These are example images. Original images will follow shortly. The unit is available from approximately week 46. The recommended retail price is €9,400 net. You will receive an invoice with VAT shown. Service: We will gladly assist you in arranging a certified Rational customer service technician. Are you looking for a specific Rational model? Ask us, we have access to a wide range of used and new equipment. We will be happy to advise you on all model types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: • 6 months warranty on all electrical parts, limited to the replacement of defective parts, without installation and removal costs • High-quality branded equipment at fair prices • Professional overhaul / inspection & expert cleaning • tested & fully functional - or money back • Flexible choice of shipping or self-collection • Competent advice - before and after the purchase • Provision of operating instructions, connection diagrams & spare parts • Inspection according to DGUV V3 Technical data: • W x D x H: approx. 847 x 776 x 782 mm • Minimum door opening dimensions for transport W x H: 845x850mm • Power connection: V: 400 / kW: 11 / Hz: 50/60 • Capacity: 6x 1/1GN • Weight: approx. 110 kg • Serial number: E61SI18012643040 • Year of manufacture: 2018 Condition: used, inspected, fully functional Additional information: • In combination steamer mode, 3 operating modes are available: steam (30°C to 130 °C), hot air (30°C to 300°C) and combination (30°C to 300°C) • Care Control - self-cleaning • Core temperature probe • Handheld spray with automatic retraction • 8.5 inch color display and touchscreen • 5 fan speeds programmable • Integrated, maintenance-free grease separation system • Automatic start time preselection • 7 cleaning levels for unattended cleaning - also overnight • Moistening adjustable in 3 stages - from 30°C to 260 °C • 5 programmable proofing levels • USB interface • Seamless, tub-shaped hygiene cooking chamber, rounded corners • Halogen cooking chamber lighting Bedo Agt Dxspfx Aktslp Shipping: • Delivery or self-collection by arrangement • Worldwide shipping on request • Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would you like advice or would you like to see something on site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: used, Double-miter saw RAPID, type DGL 5000 / 500 Bljdpfoyxy S Dex Aktep Requires repair – control system is not functioning Year of manufacture: 1993 Cutting length: 5000 mm Shortest section length: 350 mm Saw blade diameter: 500 mm - Control system is not functioning - Exposed metal parts partially show surface rust Space required (L x W x H): 7200 x 1700 x 1850 mm Weight: 1250 kg We are clearing space Affordable machine – ideal for export

Condition: excellent (used), mileage: 3,89,325 km, power: 54 kW (73.42 HP), first registration: 01/2013, fuel type: diesel, axle configuration: 4x2, wheelbase: 2,680 mm, fuel: diesel, color: grey, gearing type: mechanical, emission class: euro5, number of seats: 2, total length: 4,410 mm, total width: 1,790 mm, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, = Additional options and accessories = - Alloy wheels - Radio/CD player - Rear doors - Remote central locking - Side door = More information = General information Number of doors: 3 Year of construction: 2013 Registration number: VB-552-K Technical information Number of cylinders: 4 Engine capacity: 1.598 cc Front axle: Steering Rear axle: Double wheels Weights Empty weight: 1.491 kg Carrying capacity: 768 kg GVW: 2.159 kg Max. towing weight: 3.550 kg Condition Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Blodpfx Asz Sdumoktjp Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A