Used Defect for sale (1,075)

Condition: used, Year of construction: 2002, Cloos – Robotic welding system with 2 robots and a swivel positioner for MIG welding with a TEKA smoke extraction system. Robot type: ROMAT 310 Number of axes: 6 Payload: 10 kg Repeatability: ± 0.1 mm Working range (spherical): approx. Ø 4100 mm Control system: ROTROL II (one programming handheld device is defective) Mechanical torch cleaning: CMR Welding power source: GLC 353 Quinto Profi Wire feed unit: CK 78 A/R Wire feed system: DUO – DRIVE Connecting hose package: 3.5 m Welding torch: MRW 3802 Welding torch holder: with integrated collision protection Two-station workpiece positioner: HWR-3KDP 5.000 Load on the rotary table, one-sided: 5000 N Load on the rotary table, two-sided: 3000 N Torque for station change: 2900 Nm Torque for rotary table: 800 Nm Diameter of rotary table: 400 mm Clamping length: 4000 mm Tjdpfx Aijzrux Asred Max. speed of rotary table: 60° / sec Smoke extraction system: TEKA cartridge filter system / Type TK-ZPF-4-40-DP with extraction hood 2300 x 4800 mm Year of manufacture of the system: 2002 Certificates of conformity are available.

Condition: good (used), Approx. 400 units, Utz, Euro containers with hinged lids and lid cushioning (approx. 40x30x12cm) - used: Price for complete purchase, picked up at the location: €1,500.00 (net)! Manufacturer: UTZ Type: Year of manufacture: unknown Dimensions (L x W x H): approx. 40cm x 30cm x 12cm Tsdjzqzp Sjpfx Airsd with lid cushioning Condition: good; the hinge is defective on approx. 25% of the containers, but the containers can still be opened and closed without any problems. Available: immediately Location: Leipzig

Condition: new, Year of construction: 2023, functionality: fully functional, feed rate X-axis: 6 m/min, working width: 1,300 mm, total length: 4,885 mm, total height: 2,400 mm, total width: 3,780 mm, type of input current: three-phase, working height: 900 mm, input voltage: 380 V, input frequency: 50 Hz, energy consumption: 17 kWh, warranty duration: 12 months, DIMENSIONS OF PAINTED COMPONENTS The line will ensure good qualitative results under all operating conditions, provided that components with incorrect parameters are eliminated at the beginning, such as: • Bent, warped components; • Components with defects that would render them unsuitable for use even after painting. • Maximum length 2500 mm • Minimum length 350 mm • Maximum width 1300 mm • Minimum width 50 mm • Maximum thickness 60 mm • Minimum thickness 5 mm • Maximum deflection 10 mm • Average temperature 15-35 °C • Minimum temperature -5 °C • Relative humidity % • Operating speed 2 [2-3] m/min • Operating height 900 mm MATERIAL • Wood and wood-based materials END PRODUCT • Furniture • Outdoor furniture SHAPE • Shaped components TYPES OF PAINTS • Solvent-based paints • Water-based paints FINISH • Transparent • Matte (< 25) • Pigmented • Semi-matte (30-40) MITO B2: MITO B2 SPRAYING AUTOMAT Spraying automat with 2 arms, dry air filtration system, and conveyor belt. Machine designed for continuous coating of various types of profiled panels. Spraying in continuous mode on any type of panel. No paint mist on the underside of the panels thanks to the 1650 mm conveyor belt. Robust machine construction. Excellent access to the interior through glazed areas, access doors, and retractable parts. Components are transported by a CFB belt transport system with a sealed edge, driven by a motor with a frequency inverter. The outer side of the belt is located outside the cabin to allow vapor containment. The axis is driven by a brushless motor and a toothed belt, ball bearings. Guarantees the best feed, acceleration and deceleration parameters, allowing for maximum coating quality. New and patented PLENUM (patented air diffusion system). Thanks to flow studies, better paint management (savings), better machine cleaning, and better coating quality are achieved. Unique management of component transport with precise speed control prevents soiling of the lower part of the components during acceleration/deceleration. Tjdpjzq Axzsfx Airsd Control electrical cabinet, located at the machine entrance on the service side, with electrical installation and connection channel to the machine. Wide, robust and efficient double-zone with a filter section. Flow regulated by a frequency inverter. Tanks with supports for Columbus filters Fire-resistant ATEX cat. 2G exhaust fan HCD type belt cleaning and paint recovery system. Perfect belt cleaning, maximum paint recovery ensured by the patented system from Cefla and the CFB belt with sealed edges. Cleaning system motor with inverter 1.50 kW. Easy access system, components removable from the front, ergonomic layout. Color and product change in seconds (including a spare set). 2 opposite arms with fixed holders for 4 guns, manual height adjustment. Spraying equipment (pumps, guns) and adaptations are not included in the offer. 2 paint feed circuits with element recirculation and paint filters. Stainless steel fittings.

Condition: used, mileage: 1,73,916 km, power: 100 kW (135.96 HP), first registration: 07/2020, fuel type: diesel, overall weight: 3,500 kg, tire size: 205/75R16C, axle configuration: 4x2, wheelbase: 4,490 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 6, loading space width: 1,780 mm, loading space height: 1,940 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, sliding door, soot filter, - VW Crafter 35 Maxi - Vehicle with numerous damages and defects; not for sale to private individuals. - For inquiries in English, please contact: - Errors and prior sale excepted. Tedpfszrfi Esx Aired ... Air conditioning, climate control, VAT can be shown separately, ESP, ABS, parking assistance system, radio, telephone with hands-free function, on-board computer, cruise control, electric front windows, electric door locks, central locking with remote control, driver's airbag, power steering, tinted windows, electrically adjustable mirrors, 3rd brake light, cab: short, electric windows, previous owners: 2, emission class: Euro 6, diesel, front-wheel drive, HSN 0603, sliding door, partition wall, particulate filter, emissions badge: 4 - Green, front parking sensor, rear parking sensor, hands-free system.

Condition: ready for operation (used), functionality: fully functional, For sale is a wood chipping line (chipper canter line) with the following components: - Log infeed - Step conveyor for logs, manufacturer Saenger + Massierer - Singulator - Log conveyor - Centering infeed with log turner, manufacturer Kockums, type 447-6 C, serial number 70984 Todszrfkvspfx Airod - Chipper centering device, manufacturer Kockums, type 240-12 D - Outfeed conveyor with lateral discharge option - Control cabinet and control system (Siemens Simatic Panel) for the entire line - Max. log diameter: 50 cm The line is sold excluding any warranty and liability for defects.

Year of construction: 2020, operating hours: 942 h, condition: used, functionality: fully functional, This is a combination steamer CMP 201 in an electric version, from the premium manufacturer Rational, model year 2020, with only 942 operating hours. The unit features a fully automatic self-cleaning program!! The combination steamer is located in our in-house workshop and will undergo a thorough inspection and is sold with a 6-month warranty. You will receive an invoice with VAT shown. Service: We will be happy to assist you in arranging a certified Rational customer service technician throughout Germany. Are you looking for a specific Rational equipment type? Ask us, we have access to a wide range of used and new equipment. We will be happy to advise you on all equipment types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Tsdszqtrrspfx Airjd Our used equipment service for you: 6 months warranty on electrical parts, limited to the replacement of defective parts, without installation and removal costs. High-quality brand-name equipment at fair prices. Professional overhaul / inspection & expert cleaning Checked & fully functional Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 The CombiMaster® Plus from RATIONAL is robust and impresses with its functions, which enable the highest food quality. It supports the individual craftsmanship of the chef through precisely controlled cooking chamber climate, as well as precise adjustment of temperature, humidity, airflow and cooking time. Technical data: W x D x H: approx. 879 x 791 x 1782 mm Power connection: 400 V / kW: 37.0 / 50-60 Hz Weight: approx. 254 kg Serial number: E21MI20022814160 Year of manufacture: 2020 Condition: Used, inspected and fully functional. Further details: Possible applications: Steam mode: from 30° C to 130° C Hot air mode: from 30° C to 300° C Combination mode: from 30° C to 300° C Finishing®: Brings pre-prepared and cooled dishes to serving temperature in the optimal climate. Automatic separation of fat for clean cooking chamber air Fully automatic cleaning program 5 air speeds: Whether gentle or robust, the CombiMaster® Plus has the right air speed for every food. Ventilated 2-pane glass (swiveling for easier cleaning) Cooking chamber lighting Core temperature measurement using a sensor Cool-down function High-performance fresh steam generator (automatic flushing and draining) Handheld spray nozzle with automatic retraction Dynamic air circulation Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would you like advice or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: good (used), functionality: fully functional, For sale is a used miter saw/undercut miter saw from the manufacturer Irion & Denz Maschinenbau, Lörrach. The machine is equipped with pneumatic saw blade travel, two-hand operation, and spacious roller tables and is suitable for efficient cutting and mitering of wooden workpieces. Technical data/equipment: Manufacturer: Irion & Denz Maschinenbau Place of manufacture: Lörrach Machine type: Miter saw / Undercut miter saw Max. saw blade diameter: 500 mm Max. cutting height: 100 mm Max. cutting width: 330 mm Saw blade travel, pneumatically controlled, continuously adjustable Cutting activation via two-hand operation Pneumatic workpiece clamping Adjustable workpiece stops Extension tables with free-rolling or powered rollers Spacious roller conveyors for longer workpieces Robust industrial design Additional equipment: Stop with electronic positioning Length measurement input via keyboard or length optimization Electronic positioning/length optimization currently defective The machine is in used condition. Equipment and condition as shown in the photos. Transport is possible for an additional charge! Tjdpfx Aszymwmoired The machine is currently still at the customer's site, but would be available shortly. The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: used, mileage: 1,35,000 km, power: 78 kW (106.05 HP), first registration: 11/2013, fuel type: diesel, empty load weight: 2,500 kg, maximum load weight: 1,000 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 3,750 mm, fuel: diesel, fuel consumption (urban): 9 l/100km, fuel consumption (extra-urban): 7.3 l/100km, fuel consumption (combined): 7.9 l/100km, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 6,840 mm, loading space length: 4,300 mm, loading space width: 2,000 mm, loading space height: 2,100 mm, Year of construction: 2013, construction height: 2,850 mm, Equipment: ABS, central locking, immobilizer system, onboard computer, soot filter, Engine and transmission defective. The Iveco Daily 35 is an impressive, versatile, and practical commercial vehicle ideal for trades, service, and assembly work. With a displacement of 2,287 cm³, 135,000 km on the odometer, and first registration in November 2013, it provides a solid foundation for daily use. The automatic transmission ensures comfortable driving, while the practical shelving system keeps tools and materials neatly organized and easily accessible. The reversing camera further simplifies maneuvering. This is an immediately operational work vehicle that convincingly combines functionality, comfort, and proven Iveco technology. For sale only to businesses (agriculture, freelancers, small and large businesses) or for export. Subject to errors and prior sale. COC (Certificate of Conformity) available. Tjdpfx Aijzyv Rvsred

Condition: repair required (used), Year of construction: 2018, machine/vehicle number: 1713613, temperature: 650 °C, overall weight: 1,900 kg, EXW – Dismantling and loading must be arranged by the buyer! MACHINE DETAILS Voltage supply: 3/N/PE 400/230 V AC, 50 Hz Rated current: 125 A Rated heating current: 104 A Heating power: max. 72 kW Motor power: 3 kW Total power: 75 kW Dimensions & Weight External dimensions [mm]: 2,200 × 3,300 × 1,800 / 3,150 with lifting unit External dimensions with lifting unit: 3,150 mm Internal dimensions: 2,000 × 1,000 × 1,000 mm Weight: 1,900 kg Maximum temperature: 650 °C Protection class: IP40 Todpfjzx S Emsx Airod EQUIPMENT Operating manual CE/conformity documents Note: One burner row is defective. Electrical repair is required.

Condition: refurbished (used), Dear customers, we currently offer idler rollers and drive rollers for profile belt grinding machines made by F. Zimmermann. The rollers have been newly coated with a more robust material for improved durability, then ground to a convex shape, and fitted with new bearings. You will therefore receive fully refurbished rollers in exchange for your defective rollers! The rollers are suitable for the following machine types: Todpjd S Eb Aefx Airsd Zimmermann PS0, regardless of year of manufacture Zimmermann PS1, regardless of year of manufacture Zimmermann PS1/2, regardless of year of manufacture Zimmermann PS S, regardless of year of manufacture When placing an order, please always specify the machine type and indicate which rollers you need and in what quantity. We have everything in stock and can deliver quickly. If you have any further questions, please do not hesitate to contact me!

Condition: new, Year of construction: 2026, This is a state-of-the-art CNC machine dedicated to the industrial sector, used for cutting sheets and profiles, using a plasma torch. The machine is characterised, among other things, by a robust structure made of the highest quality steel and aluminium, a large cutting range, the possibility of cutting workpieces of any shape and low process costs. The high-end solutions used in production ensure reliable and safe operation. The cutting of the material is carried out in a short time, while maintaining the precision of the workpiece. In order to obtain the desired shape, it is only necessary to import the file into the software, so operation of this cutting machine is easy and intuitive. Our plasma cutting machines are primarily designed to process materials such as: - Black steel, - Stainless steel, CONSTRUCTION The frame of the plasma cutting machine is designed and manufactured from scratch in our factory. The high quality steel used for the machines is cut, then welded and machined. The entire frame, gantry and gantry arms have additional ribbing to achieve high rigidity and eliminate vibration and deformation. DRIVES Servo AC motors with high resolution and power have been used to drive our cutters, ensuring adequate acceleration and speed in each direction. These are highly dynamic and precise motors with feedback, guaranteeing zero defect by continuously controlling the operating parameters. The X and Y axes use classic and well-proven helical bars, which ensure long life and precision. FUEL Our plasma machines use components from the leading manufacturer PGCNC. The technologies used in the torch significantly increase productivity and cutting speed. HD technology provides better hole quality, increased piercing capacity and bevelling capabilities. This ensures high quality, repeatable cuts and maximises productivity with minimal running costs and reliability. KNIFE TABLE The knife table is made with technology that is resistant to working at elevated temperatures. This allows us to work continuously without worrying about the occurrence of burn-outs that prevent the material from being evenly positioned on the work table. The positioning of the scissors can be easily changed according to the size of the workpieces to be burnt. The knife table is an excellent solution for cutting thicker materials. Tjdeiqn Uuepfx Airjd SOFTWARE The machine is equipped with Starfire 2D CAD/CAM software. Various functions are available to the user, including the ability to import finished designs in vector formats: .dxf, .plt, .ai, .eps. The programme ensures fast and precise development of cutting paths. PLASMA SOURCE The basic plasma equipment includes the 120A cutting system, which is characterized by high productivity and cutting quality and speed. AUTOMATIC LUBRICATION SYSTEM Plasma cutting machine equipment also includes an automatic lubrication system that minimizes machine maintenance. The central lubrication system is a simple and functional device used to supply grease to the places where machine and equipment components come into contact. - POWER 400V 50Hz - MAX SPEED 45 m/min - DOOR SHAPE 200-600 mm - TYPE OF WORKING TABLE Knife table - WORKING TABLE WEIGHT 500 kg/m2

Condition: used, Year of construction: 2020, Overview This lauter tank was manufactured by the company INOXDUBRA in Spain in the year 2020. This fully functional lauter is in good condition and free from defects (such as scratches, dents). With a capacity of 10,000 liters, it is ideally suited for filtering 5,000 - 8,000 liters of wort. It is currently located at the owner's factory and is being sold because they are investing in another production line. Components: Filtering bottom Cutting blades Motor, gearbox with its speed variator Automated Guillotine valve for spent grain discharge Upper door Leg extensions CE certification and tank blueprints Tedpfxotq Dzpj Airjd

Condition: ready for operation (used), Indramat 2AD180D-B350A1-BS03-D2N1 Asynchronous main drive motor SN: 512 / terminal board defective, used, good condition, 100% functional, scope of delivery as per photos ATTENTION: Pleasequire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Tjdpjudghljfx Airsd

Condition: used, Permanent magnet motor, permanent magnet motor, gear motor, electric motor, servo motor -Power: 22 Nm -Speeds: 300 rpm -Protection class: IP 54 -Voltage: 24 V -Diameter: Ø 15 mm -Price: per piece -Number: 7x available -defective foot: 1 -Dimensions: 380/110/H160 mm Tsdjc Uz Hropfx Aired -Weight: 9.1 kg

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW 1. Bale Size: 500mm x 500mm x... 2. Container Dimensions (Width x Length x Height): 2.000mm x 2.500mm x 1.100mm 3. Capacity: 15-20 tons/hour (steel) 4. Cycle Time: 90 seconds ( Idle ) Tsdpfx Aijgwa T Rorsd 5. Top Cover Cylinder Thrust: 90 tons 6. Preliminary Compression Cylinder Thrust: 150 tons 7. Main Compression Ram Thrust: 300 tons 8. Maximum Working Pressure: 300 bars 9. Electric Motor: 2 x 75 kW = 150 kW 10. Machine Dimensions (Width x Length x Height): 10.000 mm x 10.000 mm x 4.000 mm 11. Machine Weight: 55.000 kg 12. There will be an ejection door. 13. Repairable and four-edge-usable blades. 14. Container walls will be covered with HARDOX 450 - 500 material. 15. There will be an automatic SKF liquid lubrication system integrated into the compression chamber. 16. There will be an automatic SKF greasing system that will grease the bushings. 17. Piston shafts will be induction-hardened and chrome-plated. 18. Pumps and valves used in the hydraulic system will be by PARKER or EATON VICKERS & KAWASAKI brand. 19. Bypass filter will be added to the hydraulic system. 20. There will be an AKG Hydraulic Oil Cooling System. 21. All electrical parts will be SIEMENS or SCHNEIDER Brand. 22. The machine will be fully automatic with PLC control, PLC brand and model will be SIEMENS. There will be a touch screen SIEMENS HMI Simatic Panel with emergency buttons placed on some important points. 23. There will be blades from 2767 material (hardness 55HRC) at the borders of the top cover and the sides of the scrap chamber. 24. Machine will be under AYMAS Makina San. Ve Tic. A. S. Guarantee for 1 year or 2.500 working hours whichever comes first against manufacturing defects.

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW 1. Briquette Diameter: Ø 80mm 2. Capacity: 700-900 kg/hour ( Copper ) 3. Preliminary Compression Ram Thrust: 12.5 tons 4. Main Compression Cylinder Thrust: 250 tons ( 5 tonne / cm2 ) 5. Maximum Working Pressure: 300 bars 6. Cycle Time: 12 - 14 seconds 7. Electric Motor Power: 30 kW 8. Machine Dimensions (Width x Length x Height): 2.200 mm x 2.600 mm x 2.800 mm 9. Machine Weight: 6.000 kg 10. Screw drive feeders will fill the compression chamber automatically and a built-in vibrating hopper will provide safety to the chamber by preventing the oversize material from entering the chamber. 11. Cylinder Rods are induction-hardened and chrome plated. 12. A Hydraulic Oil cooling system is implemented. 13. Pumps and valves of hydraulic systems are from worldwide reputable brands such as PARKER. Todegwa Uropfx Airjd 14. The machine is fully automatic by PLC control. 15. All electrical and electronic parts are by SCHNEIDER or SIEMENS Brand. 16. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. 17. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours.

Condition: new, functionality: fully functional, empty load weight: 10,000 kg, maximum load weight: 50,000 kg, overall weight: 60,000 kg, tire size: 235/70 r 17.5, Year of construction: 2026, chassis model: Lider Heavy-Duty Chassis, Equipment: ABS, Heavy-Duty Lowbed Semi- Trailer Lider Trailer for Heavy-Duty Trailers High-Quality and Durability Manufacturing EU Standards. Double Line Brake Systems. Tjdpfjrcig Iex Airod One-year Warranty for Manufacturing Defects. Customer Requested Colour. 2026 Production

Condition: new, functionality: fully functional, empty load weight: 11,500 kg, maximum load weight: 80,000 kg, overall weight: 91,500 kg, tire size: 295 60 R 22,5, Year of construction: 2026, chassis model: Lider Heavy-Duty Chassis, Equipment: ABS, Heavy-Duty New Lowbed Semi- Trailer Lider Trailer for Heavy-Duty Trailers Tsdpfx Aijrcig Serjd High Quality and Durability Manufacturing EU Standards. Double Line Brake Systems. One-year warranty for manufacturing defects. Customer Requested color. 2026 Production

Condition: new, Stromab Matrix F Automatic Fully Programmable Cross Cutting & Notching Machine A heavy duty optimising upstroke crosscut and notching machine, designed for programmable and repetitive cutting and notching from standard and / or random lengths of timber. The saw unit has a pneumatic upstroke action with variable speed control, The notching unit is independent of the saw and therefore allows for programming of the saw or notching either as separate program's or as one single job. The pusher / feed is fitted with a heavy duty rack and pinion drive feeding system for fast positioning giving a high level of repeat cutting accuracy. The saw unit and clamping area is totally enclosed by a clear hinged electrically interlocked hood that while giving the operator a clear view of the cutting area still gives complete protection. The infeed and outfeed tables are of all steel construction meaning even heavy sections or packs of timber can be processed. For additional operator safety the rear of the pusher system is guarded, while there is a full length safety pull cord on the front infeed table. Programming and entering of cutting lists is very simple through a colour touch screen controller with graphic representation of the cut pieces. The machine offers full optimisation and also has the added optional facilities of defect cutting and remote programming from PC or laptop with transfer vis USB key or network. Additional options also include - extended outfeed table and label printing. To date we have supplied over 250 Matrix saws in to the UK, with a number of customers installing several machines. Saw unit Self braking saw motor 10hp Saw blade diameter 500mm Max cutting width 360mm ( refer to chart ) Max cutting height 135mm ( refer to chart ) Dust extraction 4 x 100mm diameter Milling Unit Self braking milling motor 5.5hp Pneumatic milling stroke with adjustable speed Max milling stroke 400mm Max milling width 100mm Max milling depth 60mm Dust extraction 2 x 125mm and 2 x 100mm Push feed system 3000 to 13000mm Precision rack and pinion drive to pusher with magnetic reading tape giving a high level of repeat cutting accuracy. Pneumatic rising of the pusher at the end of cutting cycle Piece length reading photocell Positioning speed 100m/min Positioning accuracy + /- 0.4mm Touch screen control unit Tedpfjdy Hrdsx Airsd Remote programming of cutting list via colour graphic touch screen controller - connection via USB key. - 6 optimising criteria - longest size, minimum waste, sequence, priority size, by volume or by value. - 1000 cutting lists - 10,000 lines per list. - Cutting list entered via controller key pad or via remote PC using PC or cable - Graphic description of the workpiece.

Condition: new, Year of construction: 2025, SELF-CENTERING PLANER OSI proudly presents the European version of its self-centering planer (SCP-450). Todpeww I Iqsfx Airod For over 20 years, OSI Machinery has supplied this technology to the North American wood industry (Canada, United States). The OSI Machinerie Self-Centering Planer (SCP) optimally utilizes every single board, regardless of defects (bowed, twisted, warped, cracked), significantly increasing yield. The SCP-450 ensures 100% thickness accuracy for all processed elements. It planes the same thickness on both sides of the material. Independent suspension guarantees optimal calibration, enabling precise planing at all times. This patented solution eliminates jams and downtime. The SCP-450 is applicable in a wide range of production environments: • Hardwood lumber • Furniture • Doors and windows • Components • Cabinets • Calibration FEATURES: High yield (maximum material utilization) Opposing horizontal cutterheads Self-centering segmented feed and pressure rollers Minimized snipe and missed planing spots Attainment of maximum possible surface area Thickness accuracy guaranteed to +/- 0.076 mm Elimination of burn marks and depressions Digital thickness readouts Spiral planing heads with replaceable knives Hydro-lock collars on each 76 mm column (4) Maximum feed speed: 50 m/min Board width: 450 mm Board thickness: 4 mm to 130 mm Material removal up to 6 mm (per side) Minimum board length: 600 mm Power to planer heads: 2 x 45 kW Spiral heads: 10 spirals (5+5) Planer head diameter: 150 mm with replaceable 4-sided knives, 15 mm x 15 mm x 2.5 mm Segmented fingers: 32 mm carbide segment fingers function as pressure and anti-kickback devices Segmented roller drive power: 4 x 2.25 kW Infeed segmented rollers: 2 x top Outfeed segmented rollers: 2 x bottom Hydro-lock clamping system Voltage: 380 V

Condition: used, B&R Provit Controller 5C5001- removed from Ferromatik MV 200-970 3F - removed from running machine Tedpjw Ah Nrjfx Airsd - fully functionalmanufacturer: B&R manufacturer no.: 5C5001.11 spare part no.: 10131261If the spare part is traded in as an exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the manufacturer.

Condition: repair required (used), Verbufa Portioner 3 Hamburger Molds Rectangular Adana Sticks Tedpfx Aewg H H Roired Oval Kofte A frequency converter is defective

Condition: ready for operation (used), Year of construction: 2014, A Cimbria optical color sorting machine for bulk materials is available. Nominal throughput capacity: approx. 7t/h, chutes: 7, sorting width: approx. 1200mm, max. number of defect parameters: 16, discharge precision: +/-0.5mm, accuracy: over 99%, inlet height: approx. 2500mm. Machine dimensions X/Y/Z: approx. 3500mm/1800mm/2200mm, weight: approx. 1200kg. Documentation available. On-site viewing is possible. Tedpfxoxxl Nle Airjd

Condition: used, mileage: 41,450 km, power: 100 kW (135.96 HP), first registration: 11/2005, fuel type: diesel, empty load weight: 8,500 kg, maximum load weight: 9,500 kg, overall weight: 18,000 kg, fuel: diesel, color: white, driver cabin: other, gearing type: other, emission class: euro2, suspension: other, number of seats: 2, total length: 9,300 mm, Year of construction: 2005, operating hours: 41,450 h, construction height: 2,900 mm, Hydraulic unit defective! Todpfx Aiex U Ezcjrjd The vehicle has 253088 km. For sale is a Mercedes-Benz KAMAG WBH 25, originally registered in 11/2005 – a powerful and reliable special-purpose vehicle specifically designed for heavy-duty transport and demanding operations. Powered by a robust 4.249-liter diesel engine, it delivers impressive performance combined with high efficiency and safety. With only 41,450 km on the odometer, the vehicle is in well-maintained, almost as-new condition and is ready for immediate use. The integrated air conditioning ensures comfortable working conditions even during extended operations, while the fifth wheel coupling offers maximum flexibility for a wide variety of transport tasks. Despite its age, the KAMAG WBH 25 impresses with its solid construction and durability, making it a dependable asset for any professional operation. For those who value power, precision, and functionality, this vehicle is a true workhorse that is ready for immediate deployment and meets the highest standards. Sale to trade only (agriculture, freelance professionals, small and large businesses) or for export. Subject to prior sale and errors excepted.

Year of construction: 2003, condition: ready for operation (used), A fully automatic metal band saw Kasto with roller conveyors is available. Mitre min./max.: -45°/60°, max. cutting diameter: 260mm, max. cutting dimensions X/Y: 300mm/260mm, saw band dimensions X/Y/Z: approx. 2910mm/27mm/0.9mm, machine dimensions X/Y/Z: approx. 1500mm/1850mm/1500mm, weight: approx. 900kg, control: Kasto BasicControl. Certain parts of the machine are defective. An on-site inspection is possible. Tjdoycwrhspfx Airod