Used Defect for sale (1,005)

Year of construction: 2005, condition: ready for operation (used), Flange diameter: 160mm, clamping force: 1600kN, tie bar distance: 520mm/520mm, min. mold diameter: 350mm, min. mold installation height: 300mm, opening stroke: 650mm, platen distance: 950mm, ejector stroke: 150mm. Screw diameter: 45mm, injection pressure: 2336bar, stroke volume: 318cm³, nozzle radius: 15mm, injection volume: 134cm³, injection weight: 289g. Machine dimensions X/Y/Z: approx. 4900mm/1600mm/2200mm, weight: approx. 7400kg, operating hours: approx. 71187h. The machine has an unknown defect. Documentation available. An on-site inspection is possible. Ffodpfxouabq Tj Afpju

Condition: ready for operation (used), Longitudinal movement of the table manual drive: 750mm, longitudinal movement of the table hydraulic drive: 730mm, transverse movement of the table manual drive: 300mm, transverse movement of the table hydraulic drive: 290mm, usable surface of the table: 700x250mm, number of T-slots: 3, width of T-slots: 14mm, vertical movement of the grinding head: 400mm, division value of the grinding head manual drive: 0.01mm, distance between the inside of the grinding wheel and the column: 347.5mm, clearance under the new grinding wheel: 355mm, maximum grinding wheel diameter: 305mm, minimum grinding wheel diameter: 230mm, grinding wheel width: 25mm, grinding wheel bore: 127mm, division value of the cross table manual drive: 0.02mm, longitudinal feed of the table hydraulically: 2-25m/min, cross feed of the table stepwise, hydraulic and adjustable: 2-16mm/stroke, cross feed of the support hydraulically and continuous: 0.5-6m/min, volume of the hydraulic unit: 35l, cooling device for grinding wheel/on demand: 30l. No defects known, with documentation, an on-site inspection is possible. Fsdpfx Aow Uk Awsfpefu

Year of construction: 2001, condition: ready for operation (used), A CNC 6-axis laser precision machine for non-contact laser processing and measurement of complex geometries, particularly in the tool and mould making industry, is available. Travel X/Y/Z: 300mm/400mm/500mm, table dimensions X/Y: 300mm/400mm, axes mechanical/optical: 3/3, measurement system: non-contact SI sensor, measurement accuracy: +/-0.01mm, surface finish: Ra under 1µm, operating hours: 21045h, processing hours: 6549h. The laser (Prisma) is defective. Documentation available. An on-site inspection is possible. Ffodpfx Aow H Atyjfpou

Year of construction: 1997, condition: ready for operation (used), A complete brewhouse SSP Lichtenvoorde, purchased from the Paul Mueller Company, is available. Components: mash tun, lauter tun, whirlpool, working platform, CIP system, spent grain container, and wort pump. Brew length: 40hl, min. brew length: 25hl, min. part mash: 12hl, spent grain container volume: 2.5m³, brews: 2, pumps: 4, wort cooling pump type: E-Hygia-Bloctronic I/25b, CIP system tanks: 2, heat exchanger: Pfaduko VT20 , capacity: 26l, max. temperature: 100°C. The system is equipped with a brewhouse automation including Siemens OP37 and PROSYT control, but this is defective. If desired, the brewhouse can be purchased at an additional cost with newly installed control, automation accessories, and general overhaul. Documentation available. An on-site inspection is possible. Ffjdpfx Afoxfvh Sjpeu

Condition: ready for operation (used), A defective vertical CNC machining center DMG Mori is available. Travel X/Y/Z: 835mm/510mm/510mm, tool stations: 20, tool holder: SK40, speed: 10000rpm, table dimensions X/Y: 1000mm/560mm, T-slot spacing: 100mm, max. table load: 800kg, table height: 720mm. Control: Heidenhain TNC 530, operating hours: approx. 29836h. Either the pneumatic release cylinder or the spindle is defective. Documentation available. On-site inspection is possible. Ffsdpfx Asx Ivkzsfpsu

Condition: ready for operation (used), A defective press brake Trumpf is available. Press force: 2000kN, bending length: 4080mm, ram stroke: 365mm, table-ram distance: 632mm, max. opening height: 535mm, angular adjustment: +/-10mm, throat depth: 410mm, frame distance: 3680mm, table width: 200mm, working height: 1050mm. Machine dimensions X/Y/Z: approx. 4650mm/2250mm/2900mm, weight: approx. 18000kg. The control board is defective. The machine is equipped with intact bending aids on both sides. Documentation available. On-site inspection is possible. Ffsdpfxsx I Rq Ao Afpju

Condition: ready for operation (used), Year of construction: 2009, A wood dust extraction and filtration system Krämer for saw lines is available. 1) Wood dust extraction unit Krämer VKA-P 100/650/55, air volume flow: 27000m³/h, pressure increase: 3800Pa, motor power: 55kW, V-belt length: 3550mm. 2) Filtration unit Krämer GFS Shake 160/25/250, filtration capacity: 30000m³/h, filter material: polyester needle felt, material discharge: TFS40/10/1.1. 3) Fan Krämer VFM-R 45/250/3, air volume flow: 3000m³/h, pressure increase: 2500Pa, motor power: 3kW. 4) Fan Krämer VFM-P 42/200/4, air volume flow: 2500m³/h, pressure increase: 3000Pa, motor power: 4kW. 5) Separator tank/filter hopper Krämer. 6/7) 2x axial fans. Including pipes and peripheral equipment. The motor flange on the discharge motor is defective. Documentation available. An on-site inspection is possible. Ffedpfxsxl Elge Afpeu

Year of construction: 2002, condition: ready for operation (used), Axes: 5, travel X/Y/Z: 500mm/400mm/400mm, speed: 9000rpm, spindle power: 9kW/13kW, tool stations: 16, max. tool length: 290mm, max. tool weight: 6kg, max. table load: 200kg, feed rate: 10m/min, rapid traverse: 12m/min. Machine dimensions X/Y/Z: approx. 4500mm/4000mm/2500mm, weight: approx. 3400kg, control: Heidenhain MillPlus, operating hours: 34724h, spindle hours: 6490h. One operating button of the machine is defective, and the tool is sporadically not ejected. Documentation available. An on-site inspection is possible. This machine was used for training purposes. Ffodpfx Asx Aupiofpsu

Year of construction: 1994, condition: ready for operation (used), Pressing force: 3150kN, table dimensions X/Y: 2500mm/1600mm, stroke (fixed): 280mm, stroke rate: 20-80strokes/min, weight: approx. 68000kg. Including Dreher transfer and feed line. The control system is defective. Documentation available. An on-site inspection is possible. Ffodpsxtff Aefx Afpsu

Year of construction: 1999, condition: ready for operation (used), Working range X/Y: 1200mm/1600mm. Travel Z: 250mm. Max. table load: 80kg/m². Rapid traverse: 500mm/s. Machine dimensions X/Y/Z: approx. 2500mm/2000mm/1700mm. The machine is partially defective. On-site inspection is possible. Ffodpfowty Eaex Afpsu

Condition: ready for operation (used), Year of construction: 2020, A Panasonic laser marking machine (laser marking station) with a defective laser head is available. Travel X/Y/Z: 500mm/430mm/350mm, marking range X/Y/Z: 720mm/430mm/350mm, machine dimensions X/Y: approx. 800mm/1900mm. Documentation available. On-site inspection is possible. Ffedsv Rfqqopfx Afpsu

Year of construction: 1992, condition: ready for operation (used), Max. paper size: 720x1040mm, min. paper size straight printing: 360x520mm, straight/reverse printing: 440x520mm, paper thickness: 0.06-0.5mm, max. print size straight printing: 710x1030mm, straight/reverse printing: 700x1030mm, max. throughput straight printing/ straight/reverse printing: 7000/ 5000 sheets/h, printing plate size (recommended): 790x1045mm, print start: 48mm, print-free gripper margin: 10.5mm ±1mm. Equipment: Miller TP 104 basic machine with two printing units, perfecting device between the first and second printing unit, numbering tower with control for Zeiser and Leibinger mechanical numbering units (without numbering units), Spiess TP 104/1 sheet feeder, load: 10,000N. Remote adjustment via control console: colour control 1st and 2nd printing unit, fine adjustment of circumferential and lateral register: ±1.5mm, plate cylinder, 2x plate clamping rails at the front - single - only divided at the rear, blanket cylinder washing device - completely defective, cleaning by hand, powder sprayer without additional control, delivery extension additional area after numbering unit by approx. 1.85m, 10x application ink rollers, 8x ink transfer rollers, 1x blanket roller, 1x wash roller, 1x ink lifting roller, complete documentation. Fodpfxew Azubo Afpsfu

Condition: ready for operation (used), Three Okuma CNC horizontal lathes are available. 1) Okuma LB 15 M. 2) Okuma LB 15. 3) Okuma LB 15 W. The Okuma LB 15 W is defective. On-site inspection is possible. Individual sale possible. Fedpfswmdv Nex Afpofu

Year of construction: 1995, condition: ready for operation (used), A defective CNC spring coiling machine BB Spring (Babbio) is available. Wire thickness range: 3mm-8mm, max. outer diameter: 120mm, wire processing speed: 90m/min, power: 35kW, machine dimensions X/Y/Z: approx. 2750mm/3150mm/2700mm, weight: approx. 4000kg. Including a winch plate for winching left springs and a torsion spring device. The motor and drive of the machine are defective. Documentation available. Fedpjvripmefx Afpsfu

Year of construction: 2007, condition: ready for operation (used), A dissolver basket mill combination machine VMA Getzmann is available. Connected load: 25kVA, flour chamber volume: 4l, container volume range: 75l-750l, product volume range: 50l-400l. The ceramic insert of the flour basket is defective and must be replaced. On-site inspection is possible. Ffjdpjvtqrxsfx Afpsu

Year of construction: 2009, condition: ready for operation (used), X-axis: 320mm, Y-axis: 400mm, Z-axis: 40mm. No defects known, regularly maintained, without accessories or spare parts. The machine has already been dismantled. An on-site inspection is possible, not under power. Ffsdow U Dwnspfx Afpou

Condition: ready for operation (used), A lathe Meuser with defective return is available. Center height: 185mm, distance between centers: 700mm, swing over bed/cross slide: 370mm/200mm, bed width: 320mm, spindle bore: 47mm, speed: 1400rpm. Machine dimensions X/Y/Z: approx. 2200mm/1000mm/1400mm, weight: approx. 1500kg. An on-site inspection is possible. Ffodpoxa Ekrofx Afpeu

Condition: ready for operation (used), Year of construction: 2012, Two AmbaFlex spiral conveyors are available. 1) Height: 3100mm, infeed height: 1400mm, slat width: 400mm. 2) Height: 2650mm, inlet height range: 600mm-800mm, slat width: 400mm, defects: Torque support motor and missing foot disk. Can be repaired as required before sale. Documentation available. On-site inspection is possible. Fedpfx Aju T Rh Usfpofu

Condition: ready for operation (used), A Zinser plasma torch cutting system is available. Table dimensions X/Y: 2000mm/6000mm, plasma attachment: Hypertherm HPR260, extraction system: Donaldson, draw channel length: 10m. Including various spare parts for the burner head. The automatic gas console is defective. Documentation available. On-site inspection is possible. Ffsdpfx Afsvamq Dspju

Year of construction: 2021, condition: ready for operation (used), Robot travel path: 5000mm, arm length: 2500mm, lift: 1000mm, spin radius: 2200mm, L-manipulator load capacity: 2000kg, lift velocity: 0,85m/min, swing speed: 1,7/min, turn speed: 6/min. Roboter type: IGM RTE 497-S in hanging position, control: full digital PC-Robotcontrol, Type RCE, software: WIN 10 & Linux based System + igm Robotsoftware K6, welding process: 135 (GMAW), single-wire, Ø1,2mm, welding power source: digital Invert Welding Power Source TPS 500i (500A at 40% duty cycle), robot periphery: rotating boom for floor installation with 2,5m boom length, number of working stations: 1, working station: 3-axis L-Manipulator with lifting device with 2t nominal load capacity, security Technology: Pistol-Security-Shut-down in wrist axis, emergency Stop on Handtablet, on Manipulators and Control Panel, three-coloured warning light for the operating Status partition, security Door. machine is complete, no defects known, documentation complete, was maintained regularly. An on-site inspection is possible. Ffjdswc A Rdspfx Afpsu

Condition: ready for operation (used), A total of 18 welding machines are available. 1-9) Welding machine ESS MIG-MAG 311, functional: 3, defective: 2, unclear: 4. Including wire feeder DVK-13 and partly hose package. 10) Welding machine Migatronic MTE 320. Including wire feeder CTU 3000. The hose package is defective. 11) Welding machine Merkle W420 AC/DC TIG Insquare, welding process: TIG, material: aluminum. 12) Welding machine EWM MIG 450 puls. Including wire feeder. 13) Welding machine WIG L-TEC TIG 404 AC/DC. 14) Welding machine Cloos GLC 450 N. Including wire feeder and hose package. 15) Welding machine Oerlikon CPGL 454. Including wire feeder VCW 454 and hose package. 16) Welding machine Stel HI-MIG 500P. Including hose package. 17) Plasma cutting machine Plasma 125. Including hose package. 18) Welding machine Merkle MIG/MAG M 325 DW. Including wire feeder DV30. Documentation available. An on-site inspection is possible. Ffodexhntxjpfx Afpju

Year of construction: 2008, condition: ready for operation (used), Operating pressure: 13bar, volume flow: 17.07m³/min, motor power: 90kW, motor speed: 3480rpm, weight: approx. 1750kg. The frequency converter of the machine is defective. An on-site inspection is possible. Ffjdpfx Afsxmkc Tspsu

Year of construction: 2008, condition: ready for operation (used), A start-hole drilling machine Madra-EDM is available. Clamping dimensions X/Y: 600mm/400mm, max. workpiece height: 300mm, travel X/Y: 500mm/400mm, travel W: 250mm, travel Z: 0.01mm-380mm, max. electrode length: 400mm, max. workpiece weight: 500kg, drilling diameter range: 0.3mm-3mm. Machine dimensions X/Y/Z: approx. 1300mm/1300mm/2000mm, weight: approx. 1000kg. The electronics of the machine are defective, as the current for the erosion process is not provided. Dokumentation vorhanden. An on-site inspection is possible. Fsdpex Dcarsfx Afpefu

Year of construction: 1970, condition: ready for operation (used), Three old metalworking an tooling machines are available. 1) Milling machine Klopp FWU 13/6, year of manufacture: 1970, table length: 1905mm, machine dimensions with extended table: 2805mm/2000mm/1660mm, weight: approx. 2200kg. Without vice, with defective display. 2) Precision flat grinding machine Georg Müller MPS2, year of manufacture: 1971. 3) Plate shear Reinhardt RAS 52.80, year of manufacture: 1971, working width: 1540mm, power: 5.5PS, max. sheet thickness: 2mm, table height: 750mm, machine dimensions X/Y: approx. 2150mm/2020mm, weight: approx. 860kg. The mechanical lifting unit of the machine is defective. Documentation available. On-site inspection is possible. Individual sale possible. Fsdpfxou Eumho Afpjfu

Year of construction: 1999, condition: ready for operation (used), X-axis: 500mm, Y-axis: 230mm, Z-axis: 90mm. No defects known, regularly maintained, without accessories or spare parts. The machine has already been dismantled. An on-site inspection is possible, not under power. Fjdew U Dwhepfx Afpefu