Used Defect for sale (1,003)

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1845/455, Completely refurbished: Mechanics, geometry, hydraulics, and electrical components Wheelhead Disassembly, cleaning of parts, replacement of worn and defective components, motor overhaul, replacement of bearings, replacement of belts, spindle disassembly, replacement of seals and O-rings, plus adjustment. New paintwork. Workhead Disassembly, cleaning of parts, replacement of worn and defective components, motor replacement, replacement of belts. New spindle bearings. New paintwork. Tailstock Disassembly, cleaning of parts, replacement of worn and defective components, motor replacement, replacement of belts. New spindle bearings. New paintwork. Internal grinding attachment Disassembly, cleaning of parts, replacement of worn and defective components, installation of the support and geometry alignment. New paintwork. Hydraulics Disassembly, motor replacement, hose replacement, defective and worn parts replaced. Hydraulic block checked. X-Axis Disassembly, replacement of worn items such as O-rings, seals, rings, etc., overhaul of hydraulic piston, regrinding of tables. Z-Axis Disassembly, regrinding of tables, replacement of worn and defective parts, overhaul of hydraulic piston, scraping of V and flat guides. New paintwork. Measuring system Digital 2-axis display included. Lhedpext Ilfsfx Aaner Electrical cabinet Replacement of motor contactors and relay controls. New wiring. New variable speed drive (frequency inverter) for the workhead. TECHNICAL SPECIFICATIONS Distance between centers: 1500 mm Distance between centers (workhead to tailstock overhang): 1650 mm Center height, standard: 125 mm Center height with riser blocks: 225/250 mm Maximum grinding diameter: Ø 250 mm Maximum grinding diameter with riser blocks: 450/500 mm Table Usable surface: 2060 x 140 mm Max. length and width for surface grinding: 1750 x 200 mm Longitudinal travel, manual or hydraulic: 1750 mm Manual table movement, 1 handwheel revolution – coarse: 20.006 mm Manual table movement, 1 handwheel revolution – fine: 2.457 mm Table speed, continuously via hydraulics: up to 6 m/min Table swivelling: 6° Stop and return: 0–5 sec. Workspindle Workpiece speeds, continuously variable (electric): 20–400 rpm Swivelling: 360° Workspindle taper (internal): MT5 Tailstock Internal taper, tailstock spindle: MT3 Spindle retraction, manual or hydraulic: 30 mm Diamond dresser taper (internal): MT0 Universal grinding head Cross slide travel for wheel: 285 mm Rapid traverse for wheel slide, front and rear: 40 mm Grinding spindle speeds: 1500 – 1700 – 2200 – 3600 rpm Vertical grinding spindle movement, center heights: 125–330 mm Max. wheel for cylindrical grinding: 400 x 50 x 127 mm Max. wheel for surface grinding: 250 x 20 x 76 mm Head swivelling with locking at every 90°: 270° Wheel feed 1 division of the micrometer drum: 0.005 mm/Ø Automatic wheel feed, max.: 0.9 mm/Ø Motors Grinding spindle motor: 2,900 rpm / 4.0 hp Workspindle motor: 3,000 rpm / 2.0 hp Coolant pump motor: 2,850 rpm / 0.12 hp Internal grinding attachment Bore: 70 mm Internal grinding spindle speed Ø70 mm: 14,000 rpm Internal grinding spindle speed Ø50 mm: 21,000 rpm Subject to error or omission, the technical information is provided without obligation.

Condition: used, Year of construction: 2011, CNC LATHE MORI SEIKI NL 2000 SY Year: 2011 Machine Condition: EXCELLENT Control: Mori Seiki MSX-850 Spindle Bar Capacity: Ø 65 mm Max Turning Diameter: 360 mm X-Axis Travel: 260 mm Z-Axis Travel: 590 mm Y-Axis Travel: ± 50 mm B-Axis + C-Axis Rapid Traverse Rate (X, Z, B, Y): 30-30-30-10 m/min Main Spindle Nose: A2-6 Main Spindle Speed: 5,000 rpm Main Spindle Power: 15 kW Sub-Spindle Nose: A2-5 Number of Driven Tool Stations: 12 Sub-Spindle Speed: 6,000 rpm Lhjdpfx Aajx Nivasnsr Sub-Spindle Power: 11 kW Machine Dimensions (LxWxH): approx. 2,700 x 1,900 x 2,100 mm INCLUDED ACCESSORY: - Chip conveyor USED MACHINE IN EXCELLENT WORKING CONDITION, FREE OF DEFECTS OR UNDISCLOSED DAMAGE, CE COMPLIANT. AVAILABILITY: IMMEDIATE, SUBJECT TO PRIOR SALE. Second-hand machine in excellent condition, CE marked, free from defects or hidden damages. Delivery: Ready for dispatch, subject to prior sale. Exclusions: VAT, services, warranty, transport, loading/unloading from truck, packaging, insurance.

Condition: used, Year of construction: 2014, Make: HANDTMANN, Model: HBZ Trunnion 80, Year of manufacture: 2014, Serial No. 200793, Control unit by Heidenhain, Type TNC640, Travel distances X/Y/Z: 850 x 850 x 700 mm, A-axis max. -30/+120°, C-axis 360°, Tool holder: HSK 63A, Max. workpiece size: Ø 850 x 630 mm, Max. workpiece weight: 1,200 kg, 40-position tool changer, NC rotary/swivel table, Table diameter: 800 mm, Maximum spindle speed: 30,000 rpm, Chip conveyor by Knoll, Model 600K-3, Band filter system by Knoll, Electrical cabinet by Knoll, Control defective, Travel paths: 850 x 850 x 700 mm Ledpfxjx A U Uls Aanjhr This machine is part of an online auction. Images will be provided later.

Condition: used, Year of construction: 2018, operating hours: 9,661 h, Drive: Wheel Serial number: FB800xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21731 Specifications: 2018 model Hours: 9661 Machine width: 254 cm Cut 4x4 6 cylinder engine Tires (see pictures) Klepp mek dental tray S70 attachment Oilquick Trailer hitch Trailer setup Auxiliary hydraulics Lodpjxu A Rlefx Aanohr Suspension oscillation Reading of commuting Articulated boom Central lubrication Air conditioning/ac Radio Light Ready for delivery   Description: We have a 2018 Cat M318F Wheeled Machine w/ oilquick and tine bucket for sale. GPS is not included. Everything works as it should according to the owner. The machine has had a service agreement with Pon for 5 years. After the agreement ended, the owner has continued to service it himself. The machine has been well cared for by the owner. Errors and defects may be found. Ready for delivery Hours: 9661 Own weight: 19300 Width: 254 Model: M318F Hjulmaskin m/ oilquick og tannskuffe

Condition: ready for operation (used), You are bidding on a Heidenhain inverter UV 105, part number 344 980-13, serial number: 1334360, offered on an exchange basis (Exchange service). The unit has been professionally overhauled and fully tested, comes with a 3-month warranty, and is 100% functional. Scope of delivery as shown in the photos. Lodpfx Aaox Etkyenohr Please note: Under the exchange procedure, your defective return unit must not have any mechanical damage such as fractures or breaks, as these cannot be repaired. In such cases, an additional charge of €400 incl. VAT will apply.

Condition: used, mileage: 1,17,898 km, Year of construction: 1978, Serial number: 100xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21424 Specifications: 1978 model 117,898 km Rep. Object 205 hp 6x2 Manual transmission Tires (see pictures) Rust of the rear housing (see pictures) Frame sand blue and varnished a few years ago Battery needs to be replaced. Tipping box Foldable aluminum limbs Internal length in plan: 6,115 m Internal width in plan: 2,475 m Light Heater Ready for delivery   Crane specifications: 1979 model 10 t/m crane 2 Hydraulic outriggers Lodsxgcrgepfx Aanehr 2 Hydraulic extensions 1 Hydraulic extension on main boom 1 Manual Manually controlled Ready for delivery   Description: We have a 1978 Scania LB 81 6x2 Crane truck w/ 10t/m crane and tipper ekt for sale. The car is being sold as a repair item as it is no longer EU approved and there are errors and defects. There is a bad battery on the car, these should be replaced. Starter is starting to get bad. Errors and deficiencies exist and some cost must be taken into account to get it back in good condition. Ready for delivery Km: 117898 HK: 205 Technical approved: no EU-approved until: 28.02.2019 Own weight: 10100 Model: LB 81 6x2 Kranbil m/ 10t/m kran og tipp ekt Gearbox: Manual

Condition: ready for operation (used), You are bidding on a Heidenhain UV 105 Inverter, part no. 344 980-13, serial number 13442060, offered in exchange (exchange service). The unit has been professionally overhauled, fully tested, and comes with a 3-month warranty. It is 100% functional. Scope of delivery as shown in the photos. Attention: Ljdpex Etk Hefx Aanehr In the exchange process, your returned defective part must not have any mechanical damage, such as breakage, as these are beyond repair. In such cases, an additional charge of €400 incl. VAT will apply.

Condition: used, machine/vehicle number: YV2JSW0C08A67xxxx, mileage: 4,48,556 km, Year of construction: 2008, Please contact ATS Norway for more information Please provide reference number upon request: 21171 Specifications – Car: 2008 model EU-approved until: 31.01.2027 Odometer reading: 448,556 km I-Shift automatic transmission Power: 480 hp / 353 kW Drivetrain: 6x2 Euro 4 engine Front suspension: steel Rear suspension: air Tires (see pictures) Total length of the platform with full extension: 7.442 m Hydraulic extension: 1.5 m Foldable side doors Nox sensor recently replaced Central lubrication Air conditioning / AC Radio Extra lights   Specifications – Crane: 2008 model 370.11/8S Certified until: 05/2026 All bearings in the crane joints have been recently replaced 8 hydraulic extensions 1 manual extension Winch is disconnected (defective) 4 support leg Remote control Ready for delivery   Description: Volvo FM480 crane truck with 37 tm Effer crane (both 2008 model) for sale. The crane has had its bearings replaced in all joints and is ready for use. The winch is disconnected due to a fault. The car otherwise functions as it should according to the owner. Faults and defects may occur, and some additional costs must be expected. The crane truck is ready for delivery. Km: 448556 HK: 480 Technical approved: Yes EU-approved until: 31.01.2027 Own weight: 18000 Total Weight: 28000 Payload: 9925 Width: 255 Length: 1040 Euro: 4 Lhsdpfsw Sc Rujx Aanjr Model: FM480 kranbil m/2008, 370.11/8S Effer kran SE VIDEO Gearbox: Automatic

Condition: ready for operation (used), Heidenhain UV 105, 344 980-13, serial number: 12004785, provided in exchange (exchange service). Professionally fully overhauled and tested, comes with 3 months warranty, 100% operational, delivered as shown in the photos. Lodpfx Aaex Etldjnohr Attention: In the exchange process, your defective return part must not have any mechanical damage, such as fractures or breakages, as these cannot be repaired. In such cases, an additional charge of 400 EUR (including VAT) will apply.

Condition: ready for operation (used), You are bidding on a Heidenhain inverter UV 140, type 335 009-01, SN: 8657728B, offered under an exchange service. The unit is professionally overhauled and fully tested, supplied with a 6-month warranty and guaranteed 100% functional. Scope of delivery as shown in the photos. Please note: In the exchange process, your defective return unit must not have any mechanical damage such as breakage, as these cannot be repaired. In such cases, an additional charge of €500 incl. VAT applies. Ledpfxjx Etmze Aanshr Attention: You are bidding on a Heidenhain Inverter UV 140, 335 009-01, SN: 8657728B in exchange (Exchange service), professionally fully overhauled and tested, with a 6-month warranty, 100% functional. Scope of delivery as per photos. Please note: In both the repair and exchange procedures, your defective exchange part must not exhibit any mechanical damage such as fractures, as these are irreparable. In such a case, an additional invoice for €500 incl. VAT will be issued.

Condition: ready for operation (used), Heidenhain UVR 140D ID: 390 281-01 SN26241696T - Supplied with test protocol, professionally and fully overhauled and tested, 6 months warranty, 100% functional, scope of delivery as shown in the photos. Please note: In the exchange process, your defective exchange part must not exhibit any mechanical damage such as breakage, as these are irreparable. In such cases, a subsequent charge of €1,000 incl. VAT will apply. You are bidding on an inverter from Heidenhain (model UVR 140D 390 281-01 SN26241696T) within the exchange service. The unit is professionally overhauled and tested, with 6 months warranty and guaranteed 100% functionality. Delivery as per photos. In both repair and exchange procedures, defective exchange parts showing mechanical damage (e.g. fracture) are not accepted; these will incur a follow-up charge of €1,000 incl. VAT. Lhedpox Etr Defx Aanjr

Condition: ready for operation (used), Heidenhain UVR 150D ID: 390 421-01 Power Supply Unit SN: 26825548P, professionally completely overhauled and tested with 6 months warranty, 100% functional, scope of delivery as per photos. Note: In the exchange procedure, your defective exchange unit must not have any mechanical damage such as fractures, as these are not repairable. In such cases, a follow-up charge of €1,000 incl. VAT will be applied. Attention: You are bidding on a Heidenhain UVR 150D 390 421-01 SN26825548P inverter in exchange (exchange service), professionally completely overhauled and tested with 6 months warranty, 100% functional, scope of delivery as shown in the photos. In both the repair and exchange process, your defective unit must not display any mechanical damage such as breakage, as these cannot be repaired. If this occurs, a subsequent invoice of €1,000 including VAT will be issued. Lhodpfx Aex Etufjanjr

Condition: ready for operation (used), Heidenhain UVR 120D Id. 390 188-01 SN: 17729980D for exchange (Exchange service), professionally fully overhauled and tested with 3 months' warranty, 100% functional, scope of delivery as per photos. Please note: For the exchange process, your defective return part must not show any mechanical damage such as fractures, as these can no longer be repaired. In such cases, there will be an additional charge of €500 incl. VAT. You are bidding on an inverter from Heidenhain UVR 120D .390 188-01 SN: 17729980D in exchange (Exchange service), professionally fully overhauled and tested with 3 months' warranty, 100% functional, scope of delivery as per the photos. For both repair and exchange procedures, your defective exchange part must not exhibit any mechanical damage such as breakage, as these can no longer be repaired. In such cases, an additional invoice of €500 incl. VAT will apply. Lhedpfjx Etp Aox Aansr

Condition: ready for operation (used), You are bidding on a Heidenhain UVR 140D Inverter, ID: 1084190-01, Power Supply Unit, SN: 59161711F, available on an exchange basis (exchange service). The unit has been professionally overhauled and fully tested, comes with a 3-month warranty, and is 100% functional. The delivery scope is as shown in the photos. Please note: Under the exchange procedure, your defective unit must not have any mechanical damage such as cracks or breakages, as these cannot be repaired. In such a case, an additional charge of €400 including VAT will be invoiced. Lhjdpfxox Etths Aanjr

Condition: ready for operation (used), You are bidding on a Heidenhain UM 116D Inverter, model 667 945-01, SN: 59397457B, offered through an exchange service. The unit is professionally and completely overhauled, thoroughly tested, and comes with a 3-month warranty. It is 100% functional, with the scope of delivery as shown in the photos. Important: In the exchange procedure, your defective return unit must not have any mechanical damage such as cracks or breaks, as these cannot be repaired. In the event of such damage, an additional charge of €1,000 incl. VAT will apply. Lsdpex Etfwjfx Aanohr

Condition: ready for operation (used), Heidenhain UM 121 ID: 325 003-02 Inverter - Power Supply Unit SN: 131285638C9 in exchange (Exchange service), professionally completely overhauled and tested with 3 months warranty, 100% functional, scope of delivery as per photos. Please note: In the exchange process, your defective exchange part must not have any mechanical damage, such as breakage, as these cannot be repaired. In such cases, an additional charge of €400 incl. VAT will apply. Lsdpfx Aox Etf Rsanjhr Attention: You are bidding on a Heidenhain UM 121 inverter (325 003-02, SN: 131285638C9) in exchange (Exchange service), professionally overhauled and tested with 3 months warranty, 100% functional, delivery scope as shown in the photos. In both the repair and exchange procedures, your defective exchange part must not exhibit any mechanical damage such as breakage, as these are no longer repairable. In this case, a subsequent invoice of €400 incl. VAT will be issued.

Condition: ready for operation (used), Heidenhain UM 113 Id.325 002-03 SN: 13307325 – with test protocol, professionally overhauled and fully tested, comes with a 6-month warranty, 100% functional, scope of delivery as shown in the photos. Please note: In the exchange process, your defective part must not have any mechanical damage such as fractures, as these can no longer be repaired. In such cases, an additional invoice of €1,000 including VAT will apply. Attention: You are bidding on an inverter from Heidenhain (UM 113 ID 325 002-03 SN13307325) as an exchange (Exchange service), professionally overhauled and fully tested, with a 6-month warranty, 100% functional, and scope of delivery as shown in the photos. In both repair and exchange procedures, your defective exchange part must not show any mechanical damage like breakage, as these cannot be repaired. In such a case, a follow-up invoice of €1,000 including VAT will be issued. Lhsdpfx Aox Etanjaner

Condition: ready for operation (used), Heidenhain UM 113 ID 325 002-03 SN: 15213487 – complete with test protocol, professionally overhauled and fully tested, delivered with a 6-month warranty, 100% functional, scope of delivery as shown in the photos. Note: In the exchange process, your defective core must not show any mechanical damage such as cracks or breakage, as these are no longer repairable. In such cases, an additional charge of €1,000 incl. VAT will be invoiced. Attention: You are bidding on a Heidenhain UM 113 inverter (ID 325 002-03, SN: 15213487) on an exchange basis (Exchange Service), professionally fully overhauled and tested, with a 6-month warranty, 100% functional, scope of delivery as per photos. In both repair and exchange procedures, your defective exchange part must not exhibit any mechanical damage such as breakage, as these cannot be repaired. In this case an additional invoice of €1,000 incl. VAT will apply. Lodpfxsx Etaus Aanohr

Condition: ready for operation (used), You are bidding on a Heidenhain inverter UM 113 . 325 002-03 SN 13547884D1 offered in exchange (exchange service), professionally and completely overhauled and tested, with a 3-month warranty. The unit is 100% functional and the scope of delivery is as shown in the photos. Please note: In exchange transactions, your defective core unit must not exhibit any mechanical damages such as fractures, as these cannot be repaired. In such cases, an additional charge of €500 incl. VAT will apply. Lhjdpfx Aaox Etb Eoner

Condition: ready for operation (used), You are bidding on a Heidenhain inverter UM 113 . 325 002-02 SN:12156319 on an exchange basis (exchange service). The unit has been professionally and completely overhauled and tested, comes with a 3-month warranty, and is 100% functional. Delivery contents as shown in the photos. Important: In the exchange procedure, your defective core unit must not show any mechanical damage such as fractures, since these are not repairable. In such cases, an additional charge of €500 including VAT will be invoiced. Lhedpfx Ajx Etcisanjr

Condition: ready for operation (used), Heidenhain UV 140 ID 335 009-02 SN10106578 in exchange (Exchange service), professionally fully overhauled and tested with 6 months warranty, 100% functional, scope of delivery as shown in the photos. Please note: In the exchange process, your defective exchange unit must be free from mechanical damage such as breaks, as these can no longer be repaired. In such cases, an additional fee of €1,000 incl. VAT will be charged. Attention: You are bidding on an inverter from Heidenhain UV 140 ID 335 009-02 SN10106578 in exchange (Exchange service), professionally fully overhauled and tested, six months warranty, fully functional, scope of delivery as per photos. Both in repair and exchange procedures, your defective unit must not show any mechanical damage like fractures, as these are irreparable. In this case, a subsequent invoice of €1,000 incl. VAT will be issued. Lhodpfx Aaex Etm Ionsr

Condition: ready for operation (used), You are bidding on a Heidenhain inverter UM 121 . 325 003-02 SN:11159926B as part of an exchange service. The unit is professionally refurbished and thoroughly tested, comes with a 3-month warranty, and is 100% functional. Scope of delivery as shown in the photos. Please note: Under the exchange program, your defective return unit must not have any mechanical damage such as breakages, as these cannot be repaired. If such damage is present, an additional charge of €500 including VAT will apply. Lhsdpfx Aaox Etgbonjr

Condition: ready for operation (used), You are bidding on a Heidenhain inverter UV 130 Id. 324 998-03, serial number: 11752893A, offered as an exchange service. The unit has been professionally and completely overhauled and tested, and comes with a 3-month warranty. It is 100% functional, and the scope of delivery is as shown in the photos. Please note: For the exchange process, your defective return part must not have any mechanical damage, such as breakage, as such damage makes repair impossible. In such cases, an additional charge of €500 incl. VAT will be invoiced. Lhjdpfxex Etl Re Aanjr

Condition: ready for operation (used), You are bidding on a Heidenhain inverter UE 211D, part no. 558 303-01, serial no. 30631346D, offered on an exchange basis (exchange service). The unit has been professionally and completely overhauled and tested and comes with a 3-month warranty. It is 100% functional. Scope of delivery as shown in the photos. Important: As part of the exchange process, your defective exchange part must not have any mechanical damage such as fractures or breaks, as these cannot be repaired. In such cases, a subsequent charge of €500 incl. VAT will apply. Lhodpfox Er Udox Aaner

Condition: ready for operation (used), Heidenhain UV 130 ID: 324 998-03 SN: 12920983B – in exchange (Exchange service), professionally and completely overhauled and tested, with a 3-month warranty, 100% functional, scope of delivery as per photos. Please note: In the exchange process, your defective return unit must not exhibit any mechanical damage, such as fractures or breaks, as these are no longer repairable. In such cases, an additional charge of €550 incl. VAT will apply. Attention: You are bidding on an inverter from Heidenhain UV 130, 324 998-03 SN: 12920983B, in exchange (Exchange service), professionally fully overhauled and tested with 3 months warranty, 100% functional, delivery contents as per photos. In both repair and exchange procedures, your defective exchange part must not show mechanical damages such as breakage, since these are irreparable. In such a case, a follow-up invoice for €550 including VAT will be issued. Lhodpfx Aex Etl Dsanjr