Used Defect for sale (1,003)

Condition: ready for operation (used), Indramat CPUB 02-01-FW 261366 Serial Interface, key switch defective see photo, serial no. according to photo, used, normal traces of use, 100% functional, scope of delivery according to photos Lhsdji Ebb Ropfx Aanjr

Condition: good (used), Ride-on Scrubber Dryer Hakomatic B 750 R – used - : Price ex location: only €1,250 (net)! The battery is deeply discharged, possibly defective! Manufacturer: Hako Model: Hakomatic B 750 R Year of manufacture: unknown Serial number: 7090205065514 Operating hours: 850 h Battery is deeply discharged Condition: good Available: immediately Location: Warehouse Frankenberg / Saxony Lsdpfxsx El S Ao Aanshr

Condition: used, machine/vehicle number: YV2J1F1C9BA70xxxx, mileage: 1,39,917 km, Year of construction: 2011, Please contact ATS Norway for more information Please provide reference number upon request: 22065 Specifications: 2011 model 139,917 km Manual transmission Euro 5 Ledpfx Ajx Ip Sfoanshr 6x2 419 hp Tank volume:10,000 liters Remote control Approximately 6600 pump hours Errors and omissions may occur. Error codes in the display (see pictures) Supersucker Disabled building Hydraulic opening when emptying Tires (see pictures) Front suspension: steel Rear spring: air Air conditioning/ac Radio Light Ready for delivery   Description: We have a 2011 Volvo FM 6x2 super suction w/ Disab p build for sale. The car has error codes on the display. There are errors on, among other things, the engine cooling valve. But the engine starts and runs. The structure functions as it should, but is worn after many years of operation. Errors and defects may occur and some cost is calculated. All services have been taken care of by the owner in his own workshop. Ready for delivery. Km: 139917 HK: 418 Technical approved: Yes EU-approved until: 18.08.2026 Own weight: 20900 Euro: 5 Model: FM Gearbox: Manual

Condition: used, Year of construction: 2007, machine/vehicle number: IntNr231209, Item Description: Used LNS Express 220 Bar Feeder Year of Manufacture: 2007 Type: Bar Feeder Technical Details: Diameter Range: 2 mm to 20 mm Channel Diameter: 22 mm Maximum Bar Length: 3,000 mm Installation Dimensions (L × W × H): 3,970 × 480 × 1,250 mm Weight: approx. 850 kg Condition: Age-related wear and tear in line with the year of manufacture. Plexiglass cover is damaged; no other known faults. Special Features: Stability and Precision: Structurally identical to the Express 220 and 320, built on the same base as the Express 332. Provides optimal stability and vibration-free operation, ensuring high surface quality and dimensional accuracy at maximum productivity levels. Loading Capacity: Integrated loading ramp with a capacity of 240 mm allows for long periods of autonomous operation. Fast Diameter Changeover: Quick retooling of the channel guide in less than 2 minutes. Complete change of the guide elements possible in under 8 minutes. Guidance for 2–20 mm Bar Stock: Special channel guide system prevents bars from kicking out. Automatic opening of the channel guide during material feed-through. Lsdox Hia Tepfx Aanjhr Summary: The LNS Express 220 stands out with its robust construction, ease of use, and high reliability. This used model, despite age-related wear and minor defects, remains a solid basis for precise and efficient production processes. The machine can be inspected under power by appointment. Modifications and errors in technical data and specifications as well as prior sale reserved.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, feed length X-axis: 13,000 mm, feed length Y-axis: 240 mm, feed length Z-axis: 100 mm, feed rate X-axis: 25 m/min, pressing force: 40 t, input voltage: 400 V, total height: 1,120 mm, working height: 1,120 mm, milling spindle length: 330 mm, control voltage: 400 V, workpiece height (max.): 100 mm, tool diameter: 240 mm, rotational speed (max.): 6,000 rpm, air pressure: 7 bar, total length of planing tables: 13,000 mm, We offer a fully automated production line for the manufacture of KVH structural timber. The line is fully certified with CE marking and by the Wood Technology Institute in Poznań. Compliant with ENPN 14.081 and 14.081 standards 1. Angled discharge conveyor 2. Infeed table for visual wood grading 3. Buffer before defect cutting saw Lhodpfx Ajxfzyyeanjr 4. Automatic defect cutting saw with camera for fluorescent chalk 5. Buffer before finger jointing machine 6. Finger jointing machine with glue applicator and cross-cut saw for lengths up to 13 m 7. Chain conveyor storage from finger jointing machine to four-side planer 8. Automatic infeed for four-side planer 9. Four-side planer Winter 6-33 10. Outfeed roller conveyor from four-side planer 11. Automatic packaging machine for planed timber 12. Chain conveyor 13. Strength tester for laminated timber

Condition: used, functionality: fully functional, Foundry factory for sale, Property includes 15 buildings, 6 hectares of land. Lsdpfx Aaouxmt Tenjhr Located at the Karhula industrial site next to the city of Kotka in southeastern Finland, Karhulan Valimo was founded in the 1880’s. In 1902, the foundry was merged with a wood grindery, glass factory, brick factory and engineering works to form the Karhula Oy. In 1915 the Karhula Factories were sold to Ahlström Corporation. The current Foundry was built in 1960 and in 2000 Ahlström sold the foundry to Sulzer Pumps Finland. In 2016 Sulzer Pumps decided to close the foundry and it was sold to Karhulan Foundry Oy, which was unfortunately declared bankrupt in March 2021. Throughout its history, the foundry has been known of been able to produce highly demanding castings particularly in high alloyed steels. In 2022 Karhu Assets Oy bought the facilities and machinery of the foundry. Most of the equipment in the fettling shop has already been sold, while most of the machinery in the moulding department and meltshop are intact and available. All heat treatment furnaces, a total of 10 units, are in place and available for sale. Welcome to visit on the site! The equipment is located in Kotka, 48600, Finland, and is sold EXW Kotka in its current condition. The flight time from most European cities to Helsinki, Finland, is approximately 2 hours, and the drive from Helsinki to Kotka via the motorway is about 120 km (1 hour). You are welcome to visit us in person to inspect the foundry machinery! Second-Hand Condition: All machines, equipment, and articles are sold in a used condition. No Warranty, Exchange, or Guarantee: The seller does not offer any warranties or guarantees on the items sold. There is no option for exchange or refund, so the buyer accepts any risks associated with the purchase. As Inspected On Site: The buyer must inspect the goods on-site before making the purchase, as the sale is final once inspected. The seller will not be held responsible for any defects found after the purchase.

Condition: ready for operation (used), Heidenhain UVR 130D Converter ID: 377 639-01 SN: 23867698G, professionally fully overhauled and tested, with 3 months warranty, 100% functional, scope of delivery as shown in the photos. Important notice: In the exchange procedure, your defective exchange part must not show any mechanical damage, such as breakage, as these are beyond repair. In such cases, an additional charge of €600 including VAT will apply. Attention: You are bidding for a Heidenhain UVR 130D inverter (part number 377 639-01, SN23867698G) on an exchange basis (exchange service), professionally overhauled and tested, supplied with a 3-month warranty, 100% functional. Delivery contents as per the photos. Please note: Both in repair and exchange processes, your returned defective part must not have any mechanical damage such as cracks or breaks, as these cannot be repaired. In this event, a supplementary invoice of €600 including VAT will be issued. Lhedpfox Ht Etjx Aanor

Year of construction: 2015, condition: refurbished (used), functionality: fully functional, machine/vehicle number: E21MH15062462795, This combi-steamer by the premium manufacturer Rational is a CombiMaster® Plus featuring 20 x 1/1 GN shelves, built in 2015 with an electric configuration. The unit has been fully overhauled in our in-house workshop and is in excellent working condition. The original net list price for this combi-steamer is €18,920. Please note: The images shown are for illustration purposes only. Actual photos will follow soon. The unit is available from the end of week 51. You will receive an invoice with shown VAT. Service: We are happy to assist you in arranging a certified Rational customer service provider. Looking for a specific Rational appliance model? Ask us—we have access to a wide selection of used and new equipment. We provide expert advice on all models, including SCC, CM, CMP, VCC, iVario, iCombi Classic, and Pro. This unit is the ideal choice if you are looking for a classic combi-steamer with manual operation. Our used equipment service includes: - 6 months warranty on electrical parts, limited to replacement of defective components only (excludes installation/removal costs) - High-quality branded equipment at fair prices - Professional refurbishment, inspection & expert cleaning - Fully tested & operational—or your money back - Flexible choice between shipping or self-collection - Competent advice—before and after purchase - Provision of operating instructions, wiring diagrams & spare parts - DGUV V3 safety inspection The CombiMaster® Plus by RATIONAL is robust and impresses with features that ensure the highest food quality. It supports the chef's individual craftsmanship with precisely controlled cooking chamber climate, as well as accurate settings for temperature, humidity, air flow, and cooking time. Technical data: - Dimensions (W x D x H): approx. 870 x 800 x 1800 mm - Minimum door opening for transport (W x H): 925 x 1900 mm - Power supply: 400 V / 37 kW / 50-60 Hz - Weight: approx. 225 kg - Serial No.: E21MH15062462795 Lodpfxjx Hfk Uj Aanshr - Year of manufacture: 2015 Condition: used, fully refurbished, in full working order Further specifications & features: - Steam mode: 30° C to 130° C - Hot air mode: 30° C to 300° C - Combination mode: 30° C to 300° C - Finishing®: brings pre-cooked and chilled dishes to serving temperature at the optimum climate - Automatic grease extraction for clean cooking chamber air - Manual cleaning program - 5 fan speeds: from delicate to robust—CombiMaster® Plus has the correct airflow for every type of food - Double-glazed (ventilated and hinged for easy cleaning) - LED cooking chamber lighting - Core temperature measurement with probe - Cool-down function - High-performance fresh steam generator (automatic rinsing and draining) - Hand shower with automatic retraction - Dynamic air circulation Shipping: - Delivery or self-collection by arrangement - Worldwide shipping on request - Shipping to islands or mountain stations only by arrangement Do you have questions, need advice, or want to view the equipment on-site? You can reach us by phone during our business hours: Monday–Friday, 09:00–13:00 and 14:00–17:00. Sales are subject solely to our general terms and conditions (GTC).

Condition: used, Year of construction: 2012, operating hours: 8,651 h, Serial number: k5xxxx Please contact ATS Norway for more information Ljdpexhcdrofx Aanjhr Please provide reference number upon request: 21455 Specifications; 2012 model 8651 hours (I want to know a little) 22260 kg 116 kW Additional hydraulics Central lubrication Track guides Poor chassis Services provided by owner Crack in front window (see pictures) Light Air conditioning/ac Radio Ready for delivery   Description: We have a 2012 Komatsu pc210lc-8 Excavator for sale. The machine has poor undercarriage and should be replaced. Some cosmetic damage can also be found. All services have been carried out by the owner. Errors and defects exist and some cost must be taken into account. Ready for delivery Hours: 8651 Own weight: 22260 Kw: 116 Model: pc210lc-8 Gravemaskin

Condition: used, Year of construction: 2022, Optimization cross-cut saw Weinig type OptiCut 260 for automatically cutting wood according to defects (fluorescent chalk) and lengths. The separate measuring station records the lengths and marked defects. Technical specifications: tba saw blade ø: 500 mm input length: 400 - 6300 mm Ledex Ditfjpfx Aanshr input thickness: 12 – 80 mm feed: max. 250 m/min cutting height: 260 mm bars: about 1 second saw motor: 7,5 kW marking station: 5.000 mm exit belt: 7,5 m Control: OptiCom Pro Construction year: 2022

Condition: used, Year of construction: 1976, pressing area: 2500mm x 1250mm opening: 360mm heating plate top: elektric heating plate bottom: defective Lsdpfxsx Edl Ee Aanehr plate surface: ALU - anodized pressure: 90t number of cylinder: 4 electricity: ca. 33A machine length: 3000 mm machine width: 1500mm weight: 4000kg

Condition: new, We offer trapezoidal sheets in II steel grade. Lhsdpeq Ht E Uefx Aansr Possibility of forming trapezoidal sheets: T-14, T-18, T-35, T-55 Sheet lengths according to customer guidelines. Possibility of applying anti-condensate. The grade II sheets we offer are produced from old coils or coils with non-standard widths. The sheets have no surface defects. We have huge access to coils in different colours and thicknesses from which we can form different trapezoids. The following offer is given as an example: Trapezoidal sheet metal T-18, colour: white, thickness: 0.45 mm, quantity: 2500 m2, price: 4.35 EUR/m2

Condition: ready for operation (used), Heidenhain UP 110 braking resistor ID: 341 516-01 SN: 39716984F, professionally fully overhauled and tested with 3 months warranty, 100% functional, scope of delivery as per photos. Note: In the exchange process, your defective exchange part must not show any mechanical damage, such as breakage, as these cannot be repaired. In such cases, a subsequent charge of €1,000 incl. VAT will apply. Attention: You are bidding on a Heidenhain UP 110 Inverter ID: 341 516-01 SN: 39716984F as part of an exchange service, professionally fully overhauled and tested with 3 months warranty, 100% functional, scope of delivery as per photos. For both repair and exchange procedures, your defective exchange part must not exhibit any mechanical damage such as breakages, as these are irreparable. In this case, a subsequent invoice of €1,000 incl. VAT will be issued. Lodpfxjx Ht Ege Aanjhr

Condition: used, Hardness testing device, hardness measuring machine, hardness tester, hardness tester -Hardness tester: according to Brinell and Rockwell Accessories are missing and therefore it is sold as defective. -Handover in its current condition as inspected -Dimensions: 600/220/H660 mm -Weight: 92 kg Ljdpfx Aaeb A Rkvonshr

Condition: used, machine/vehicle number: WDB9702781K82xxxx, mileage: 2,80,000 km, Year of construction: 2003, Please contact ATS Norway for more information Please provide reference number upon request: 20869 Specifications: - 2003 model Lodpfswv I H Rex Aanjhr - Approx. 280,000 km - Not EU approved - Repair item - Manual transmission - Tires (see pictures) - 4x2 - Euro 3 engine - 231 HP - Starts and runs - Front suspension: steel - Rear suspension: air - Air conditioning - Radio - Lights - Ready for delivery Description: We have a 2003 Mercedes-Benz 1523 4x2 box truck w/ full side opening and lift Repair item for sale. The car is in unknown condition and faults and defects occur. It is not EU approved and is being sold as a repair item. Some additional costs must be expected. Ready for delivery Km: 280000 HK: 231 Technical approved: no EU-approved until: 30.06.2020 Own weight: 8000 Total Weight: 15500 Payload: 7425 Width: 255 Length: 975 Euro: 3 Model: 1523 4x2 skapbil m/ full sideåpning og lift ekt Gearbox: Manual

Condition: used, Year of construction: 2004, Automatic optimization cross-cut saw (push-type saw) Dimter type OptiCut 700 for cross-cutting wide timbers according to defects (fluorescent chalk) and lengths. Without vacuum lifter. cutting height: Max. 120 mm Lodpsx Eblvsfx Aanshr cutting width: max. 700 mm input length: max. 5,300 mm

Year of construction: 2005, condition: ready for operation (used), This 3-axis Sodick AQ327l wire EDM machine was manufactured in 2005. Despite a permanent short circuit due to a defective circuit board, it includes replacement belts and has had its axis drives and controls replaced. Operated via a PC monitor, it comes with a repaired computer and SolidWorks software. Consider the opportunity to buy this Sodick AQ327l wire EDM machine. Contact us for more information about this machine. Lsdex D Ewtepfx Aanehr Application Types EDM

Condition: ready for operation (used), Year of construction: 1981, spindle bore: 128 mm, Centre height 550 mm, distance between centres 6,000 mm, drive power 30 kW, Heidenhain digital display, 3-jaw chuck 500 mm, tailstock, steady rest, faceplate 900 mm, leadscrew nut defective Lhsdpfx Aaowz Eluenjr

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: E11SI19062756324, This is a Rational SCC 101 combi-steamer from the premium manufacturer Rational, electric version. This combi-steamer is equipped with a hanging rack with 10 slots. The unit is in well-maintained used condition, has undergone a thorough inspection in our in-house workshop, is fully functional, and comes with a 6-month warranty on all electrical components. The base stand pictured is not included in the offer but can be purchased as an optional extra. You will receive an invoice with VAT shown. Available from week 51! Lsdpfx Aaox El Auenehr Service: We are happy to assist you in finding a certified Rational customer service partner. Looking for a specific type of Rational equipment? Contact us—we have access to a wide range of new and used models. We are glad to advise you on all equipment types, including SCC, CM, CMP, VCC, iVario, iCombi Classic, and Pro. Our used equipment service for you: - 6-month warranty on electrical parts, limited to replacement of defective parts (without removal/installation costs) - High-quality branded equipment at fair prices - Professional refurbishing/inspection & expert cleaning - Tested & fully functional – or your money back - Flexible shipping or pickup options - Competent advice — before and after your purchase - Provision of user manuals, wiring diagrams & spare parts - DGUV V3 electrical safety testing This combi-steamer accommodates 10 x 1/1 GN containers. In automatic mode, the unit detects the optimal cooking path, item size, load quantity, and product-specific requirements for 7 applications (meat, fish, poultry, side dishes, egg dishes, bakery products, and finishing). Technical data: W x D x H: approx. 847 x 776 x 1042 mm Power connection: V: 400 / kW: 18.6 / Hz: 50/60 Weight: approx. 135 kg Capacity: 10 x 1/1 GN Serial number: E11SI19062756324 Year of manufacture: 2019 Condition: used, fully functional Additional information: - With care Control – self-cleaning - In combi-steamer mode, three operating modes are available: steam (30°C to 130°C), convection (30°C to 300°C), and combination (30°C to 300°C) - Core temperature probe - Hand shower with automatic retraction - 8.5-inch color display and touchscreen - 5 programmable fan speeds - Integrated, maintenance-free grease separation system - Automatic start time preselection - 7 cleaning programs for unattended cleaning, incl. overnight mode - 3-stage humidity adjustment – from 30°C to 260°C - 5 programmable proofing stages - USB interface - Seamless, hygienic cooking chamber with rounded corners - Halogen chamber lighting Shipping: Delivery or collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1315/451, Completely overhauled: Mechanics, geometry, hydraulics, and electrical parts (checked and/or replaced) Wheelhead: Disassembled, parts cleaned, worn or defective components replaced, motor overhauled, bearings replaced, belts replaced, spindle disassembled, seals and O-rings replaced, adjustments made. Newly painted. Workhead: Disassembled, parts cleaned, worn or defective components replaced, motor overhauled, belts replaced. New spindle bearings. Newly painted. Tailstock: Disassembled, inspected, overhauled. Hydraulics: Disassembled, motor checked, hoses replaced, defective and worn parts replaced. Hydraulic block checked. X-axis: Disassembled, all worn parts such as O-rings, seals, segments, etc. replaced, hydraulic piston overhauled, table ground. Z-axis: Disassembled, table ground, worn or defective parts replaced, hydraulic piston overhauled, newly painted. Electrical cabinet: Completely checked, various relays replaced. Paintwork: Colors: White RAL 9003 and Grey RAL 7011 Lhodpfx Aajw U Ry Njner Geometry according to manufacturer's protocol. Various accessories checked and cleaned. Origin: CH Voltage: 380 / 50 / 3 Net weight: approx. 2,200 kg Customs tariff number: 8460.2920 TECHNICAL SPECIFICATIONS Nominal distance between centers: 600 mm Max. distance between centers (with extended headstock): 750 mm Center height, standard: 125 mm Center height with interchangeable pads for heads: 175–250 mm Max. workpiece diameter (125 mm center height): 250 mm Max. workpiece diameter with interchangeable pads: 350–500 mm Swiveling range of table in each direction: 10° Max. grinding length for flat surfaces (max. width = 200 mm): 900 mm Continuously variable hydraulic table speed: up to approx. 6 m/min Table reversal delay: 0–5 sec Grinding wheel for external grinding, diameter - width - bore: 400x50x127 mm Grinding wheel for flat surface grinding: 250x13x76 mm Wheelhead spindle speed: 1,500/1,700/2,200/3,600 rpm Wheelhead swiveling range: 270°, with indexing every 90° Vertical travel of wheelhead, center height: 125–350 mm Transverse travel of wheelhead: 285 mm Hydraulic rapid traverse stroke: 40 mm Intermittent infeed of wheel by table reversal: 0.001–0.03 mm/dia Continuous infeed for plunge grinding: 0–0.9 mm/dia Micrometric infeed stop, by division: 0.001 mm/dia Workhead swiveling range: 360° Workhead spindle speed, stepless: normal/special: 20–400 / 10–400 rpm Internal taper of workhead/tailstock: Morse 5/3 Wheelhead motor: approx. 4 HP All technical specifications are given without obligation and subject to errors or omissions.

Condition: used, Year of construction: 2007, operating hours: 12,600 h, Field of application: Construction Drive: Track Serial number: CAT00D6RJDMK0xxxx Please contact ATS Norway for more information Please provide reference number upon request: 22024 Specifications: Model year: 2007 Hours: approx. 12,600 Weight: approx. 18,847 kg 149 kW Undercarriage (see photos) Ripper with new teeth Straight blade Good cutting edge steel GPS ready Radio/CD Climate control/AC Description:CAT D6R dozer from 2007.The machine was serviced when the owner bought it in 2021, including replacement of the ripper teeth.It is GPS-ready. The dozer has no known faults or defects.Can be delivered at short notice. Hours: 12600 Own weight: 18847 Lodpfxex Hdkto Aanjhr Kw: 149 Model: D6R Dozer m/ ripper

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: E11SI19062756323, This listing is for a Rational SCC 101 combi-steamer from the premium manufacturer Rational, in electric configuration. This combi-steamer comes equipped with a hanging rack featuring 10 slots. The unit is in well-maintained used condition, has undergone a thorough inspection in our in-house workshop, is fully functional, and is offered with a 6-month warranty on all electrical parts. The stand shown in the pictures is not included in the offer but can be purchased as an option. Please note: The images are sample images. Original photos will follow shortly. You will receive an invoice with VAT shown separately. Available from calendar week 51! Service: We are happy to connect you with a certified Rational service partner throughout Germany. Are you looking for a specific Rational equipment type? Ask us – we have access to a comprehensive range of used and new products. We are happy to advise you on all device types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, or Pro. Lhsdpfxjx Elzdj Aaner Our used equipment service for you: 6 months warranty on electrical parts, limited to replacement of defective parts, without installation or removal costs High-quality branded equipment at fair prices Professional refurbishment / inspection & expert cleaning Tested & fully functional – or your money back Shipping or local pickup selectable Competent advice - before and after purchase Provision of operating instructions, wiring diagrams & spare parts DGUV V3 safety inspection This combi-steamer accommodates 10 x 1/1 GN containers. In automatic mode, the unit independently recognizes the ideal cooking process for 7 applications (meat, fish, poultry, side dishes, egg dishes, baked goods, and finishing), the size of the food, the load volume, and the product-specific requirements. Technical data: W x D x H: approx. 847 x 776 x 1042 mm Power supply: V: 400 / kW: 18.6 / Hz: 50/60 Weight: approx. 135 kg Capacity: 10 x 1/1 GN Serial number: E11SI19062756323 Year of manufacture: 2019 Condition: used, fully functional Additional features: With care control – self-cleaning 3 operating modes in combi-steam mode: Steam (30°C to 130 °C), Hot Air (30°C to 300°C), Combination (30°C to 300°C) Core temperature probe Hand shower with automatic retraction 8.5 inch color display and touchscreen 5 programmable fan speeds Integrated, maintenance-free grease separation system Automatic start time pre-selection 7 cleaning levels for unattended cleaning – including overnight Steam injection adjustable in 3 levels – from 30°C to 260°C 5 programmable proofing stages USB interface Seamless, tray-shaped hygienic cooking chamber with rounded corners Halogen cooking chamber lighting Shipping: Delivery or local pickup by arrangement Worldwide shipping on request Shipping to islands or mountain stations by arrangement only

Condition: used, machine/vehicle number: WJMA1VPH60C31xxxx, mileage: 7,30,000 km, Year of construction: 2014, Please contact ATS Norway for more information Please provide reference number upon request: 22008 Specifications: EU-approved until 30.01.2026 Model year: 2014 Mileage: approx. 730,000 km Automatic Full air suspension Tires (see photos) Euro 6 Length: 697 cm Width: 255 cm Wheelbase: 340 cm Curb weight: 9,050 kg 6x2 510 hp Damage at the lower front (visible in photos) Additional lights Bed Radio/CD Climate control / AC Description:2014 Mercedes Actros tractor unit sold as a repair object.The gearbox is defective and must be replaced.Ready for delivery. Km: 730000 HK: 360 Technical approved: no EU-approved until: 04.10.2025 Lhedpsx E Nnnjfx Aansr Own weight: 9290 Total Weight: 27000 Payload: 17950 Width: 255 Length: 697 Euro: 6 Model: Actros 2551 6x2 Trekkvogn. Rep objekt. Gearbox: Automatic

Condition: used, mileage: 1,92,304 km, Year of construction: 2013, Serial number: VF644AGE00001xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20848 Specifications: - 2013 model - 192,304 km - Eu-approved until: 02.06.25 - Euro 5 engine - Automatic - 4x2 - 219 hp - Front suspension: steel - Rear suspension: air - Internal width: 2,462 m - Internal height: 2,408 m - Internal length: 6,522 m - Tires (see pictures) - Defective lift (due to hydraulic leak) - Zepro lift - Air conditioning/ac - Lights - Heated mirrors Lhodpfswvywhex Aanjr - Error codes - Ready for delivery Description: We have a 2013 4x2 Renault Midlum Box truck with a defective lift for sale. There is a defective lift on the car as it has a hydraulic leak. There is also a bad battery on the car. This may need to be replaced. There are also some error codes on the display (see pictures)  besides this, the car starts and works according to the owner. Errors and deficiencies exist and some additional costs must be expected. Ready for delivery. Km: 192304 HK: 219 Technical approved: no EU-approved until: 02.06.2025 Own weight: 5730 Total Weight: 7500 Payload: 1695 Width: 255 Length: 848 Euro: 5 Model: midlum

Condition: used, Year of construction: 1985, Serial number: 5xxxx Please contact ATS Norway for more information Please provide reference number upon request: 22043 Specifications: 1985 model Number of hours unknown Weight: 15,400 kg 6x6 Tires (see photos) Tipping function works Lhedpfx Aajx Hnxzonor Engine and gearbox are in good working order Some lights are defective, according to owner Service and maintenance performed by owner Ready for delivery Description: 1985 Volvo 861 dumper.According to the owner, the dumper is operational, but has some defective lights, etc.Ready for delivery.     Own weight: 15400 Model: 1985 Volvo 861 6x6 Dumper