Used Defective for sale (984)

Condition: used, mileage: 17,068 km, power: 346 kW (470.43 HP), first registration: 07/2023, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 08/2026, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Standard warranty, extended liability for material defects 48 months max. 200,000km WITHOUT TRAILER SURCHARGE!!! Construction site package, trailer package, EBS, full brake assistant, steering brake, roll-away lock, 2 rotating beacons on FH, LED lighting, front rear view camera, ASR, emergency brake assistant, lane departure warning system, PTO gearbox-dependent, MAN Mediasystem Advanced Navi 7'', Navi map Europe+Russia, RIO BOX, smartphone integration, Rockinger SK5 towing hitch, broom and shovel holder, side deflector plates on skip side wall, longitudinal deflector plates on skip side wall. Longitudinal deflector plates on body side wall, protective roof screwed over the entire width of the body, PVC roll-up tarpaulin, 3x tarpaulin fastening with tensioning strap and ratchet on the side, Hedot Hn Awspfx Abkjk

Condition: repair required (used), Year of construction: 2016, Manufacturer: EWAG AG Hjdpfxoytrp Ns Abkek Model: Laser Line Ultra Machine Type: 5-axis Laser Machining Centre Serial Number: 7195-0022 Release: 5 Year of Manufacture: 2016 Laser Source: Coherent Hyper-Rapid 50 Laserhead Laser Manufacturer: Coherent Kaiserslautern GmbH Laser Manufacturing Date: 28.01.2016 Laser Classification Machine: Laser System Class 1 according to DIN EN 60825-1:2008-05 Axes: X, Y, Z, B, C CNC Control: Fanuc 31i-5 Control Operating Voltage: 3 × 400 VAC / N / PE Frequency: 50 Hz Control Voltage: 24 V DC Rated Current: 17.3 A Connected Load: 12 kVA Max. Fuse Protection: 25 A (slow-blow) Wiring Diagram Number: 100211907 Extraction System: ULT LAS 200 Extraction System Documentation: complete Operating Hours: 35,788.02 h Note: Laser unit is defective and must be replaced Robot currently removed and being overhauled, optionally available Inspection under power possible

Year of construction: 1999, condition: ready for operation (used), Grinding dimensions X/Y: 600mm/305mm, max. workpiece height: 350mm, feed rate X: 24m/min, feed rate Y/Z: 2m/min, machine dimensions X/Y/Z: approx. 3000mm/2700mm/2500mm, weight: approx. 3200kg, control: Siemens Sinumerik. The control has a circuit board defect. Documentation vorhanden. An inspection on site is possible. Hsdpfxoywy Rqe Abkjk

Condition: like new (used), mileage: 5,000 km, power: 200.06 kW (272.01 HP), Year of construction: 2024, operating hours: 250 h, Dear Sir or Madam, We are offering a Unimog U 427 for sale. The vehicle is in like-new condition. Vehicle data: Mileage: approx. 3,000 km Operating hours: approx. 250 Engine: 200 kW / 272 hp, Diesel, EURO 6 Color: orange Vehicle equipment: - Trailer brake, dual-circuit - Front mounting plate, size 3 - Air conditioning - Air-suspended driver's seat with seat heating - Air-suspended passenger seat - Reversing camera - Heated windscreen - Central locking system - Split-range transmission with working group - Automatic Shift (automatic transmission) - Tipping cylinder - Second hydraulic circuit - Snowplow relief - Tachograph - High Performance Engine Brake - Front PTO shaft and much more. !!! Spreader is not included !!! Sale as is, only to commercial buyers!!! Our business hours: Mon-Thu: 07:00 - 15:30 Fri: 07:00 - 15:00 The offer is subject to our general terms and conditions! Sale only to businesses! Used vehicles/equipment are sold without any warranty for material defects as per our terms and conditions! If you have any further questions, I am happy to assist you. For viewings and/or test drives, please arrange an appointment in advance! Vehicles/equipment are not always available on site. Hsdpfx Abjwbtwljkek

Condition: used, mileage: 1,37,500 km, power: 132 kW (179.47 HP), first registration: 09/2013, fuel type: diesel, empty load weight: 2,029 kg, maximum load weight: 971 kg, overall weight: 3,000 kg, axle configuration: 4x2, wheelbase: 3,400 mm, fuel: diesel, CO₂ emissions: 224 g/km, fuel consumption (urban): 10.8 l/100km, fuel consumption (extra-urban): 7.2 l/100km, fuel consumption (combined): 8.5 l/100km, color: grey, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 3, total length: 5,292 mm, loading space volume: 6.7 m³, loading space length: 2,970 mm, loading space width: 1,692 mm, loading space height: 1,410 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, sliding door, soot filter, traction control, trailer coupling, CAR PARADISE in Berlin Frank-Zappa-Str. 9A Mon-Fri 9:00-17:00 Sat 10:00-13:00 Tel: Hedew I Ew Aepfx Abkjk VEHICLE FINANCING & TRADE-IN POSSIBLE VW T5 Transporter 2.0 BiTDI 132kW DSG 1st hand, * Air conditioning, * Cruise control, * ABS, ESP, * Central locking with remote control 2x keys, * NAVIGATION SYSTEM * RVC * Electric outside mirrors, * Electric windows, * Truck registration 3 seats (all with 3-point belt), * Trailer hitch up to 2,500kg, * Driving lock, * 18" alloy wheels * Used van in very good condition! * Full service history Please arrange a test drive by phone, Subject to prior sale and errors Call us !! We speak English. Financing, trade-in, other offers can be found on our homepage The information provided in advertisements, on the Internet, price tags and pictures are non-binding descriptions and do not serve as guaranteed properties. The seller also assumes no liability for typing, spelling and data transmission errors. Listed equipment may need to be checked separately. Due to the high mileage and/or the age of the vehicle, the sale is made with the exclusion of liability for material defects exclusively to traders, dealers or the export industry.

Condition: used, mileage: 1,94,000 km, power: 132 kW (179.47 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x4, overall weight: 2,820 kg, empty load weight: 1,975 kg, first registration: 12/2013, loading space length: 1,555 mm, loading space width: 1,620 mm, loading space height: 508 mm, fuel consumption (urban): 9.8 l/100km, fuel consumption (extra-urban): 7 l/100km, fuel consumption (combined): 8 l/100km, CO₂ emissions: 211 g/km, emission class: euro5, color: orange, driver cabin: other, suspension: other, number of seats: 2, total length: 5,254 mm, fuel: diesel, Equipment: ABS, air conditioning, airbag, all wheel drive, central locking, cruise control, differential lock, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, soot filter, traction control, trailer coupling, AUTOPARADIES in Berlin, Frank-Zappa-Str. 9a Mon-Fri 9:00 am – 5:00 pm Sat 10:00 am – 1:00 pm Website: --- Tel: VEHICLE FINANCING & TRADE-IN POSSIBLE VW Amarok Canyon 2.0 TDI 132kW DoubleCab 4Motion EURO 5 * DSG automatic transmission * Cruise control * Trailer coupling 3200 KG * Front & rear parking sensors * Air conditioning * On-board computer with multifunction display * Tire pressure monitoring * 4x electric windows Hjdpfx Abex U Awhjksk * Electrically adjustable, heated exterior mirrors * Central locking with remote control (1x) * Bluetooth mobile phone preparation * Radio/CD player (MP3 compatible) * AUX-IN, USB multimedia port for external audio devices * Airbags incl. curtain airbags * Passenger airbag deactivatable * Washer fluid level indicator * Electronic Stability Program (ESP) * Traction control (ASR) * Anti-lock braking system (ABS) * Fog lights * ISOFIX child seat attachment * Lumbar support for driver and passenger * Height-adjustable front seats * Height-adjustable steering column * Outside temperature display * Tinted rear and side windows * Heat-insulating glazing Please call to schedule a test drive. Subject to prior sale and errors. Call us! We speak English. Financing, Trade-in, Further offers available on our homepage. The information provided in advertisements, on the internet, price tags, and images are non-binding descriptions and do not constitute agreed specifications. The seller also assumes no liability for any errors arising from typographical or data transmission mistakes. Listed equipment should be verified separately if necessary. Due to the high mileage and/or vehicle age, this vehicle is sold to commercial customers, dealers, or for export only, under exclusion of liability for material defects.

Condition: used, mileage: 1,37,500 km, power: 132 kW (179.47 HP), first registration: 09/2013, fuel type: diesel, empty load weight: 2,029 kg, maximum load weight: 971 kg, overall weight: 3,000 kg, axle configuration: 4x2, wheelbase: 3,400 mm, fuel: diesel, CO₂ emissions: 224 g/km, fuel consumption (urban): 10.8 l/100km, fuel consumption (extra-urban): 7.2 l/100km, fuel consumption (combined): 8.5 l/100km, color: grey, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 3, total length: 5,292 mm, loading space volume: 6.7 m³, loading space length: 2,970 mm, loading space width: 1,692 mm, loading space height: 1,410 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, sliding door, soot filter, traction control, trailer coupling, CAR PARADISE in Berlin Frank-Zappa-Str. 9A Mon-Fri 9:00-17:00 Sat 10:00-13:00 Tel: VEHICLE FINANCING & TRADE-IN POSSIBLE VW T5 Transporter 2.0 BiTDI 132kW DSG 1st hand, * Air conditioning, * Cruise control, * ABS, ESP, * Central locking with remote control 2x keys, * NAVIGATION SYSTEM * RVC * Electric outside mirrors, * Electric windows, * Truck registration 3 seats (all with 3-point belt), * Trailer hitch up to 2,500kg, * Driving lock, * 18" alloy wheels Hodpfx Abew I Ew Nokok * Used van in very good condition! * Full service history Please arrange a test drive by phone, Subject to prior sale and errors Call us !! We speak English. Financing, trade-in, other offers can be found on our homepage The information provided in advertisements, on the Internet, price tags and pictures are non-binding descriptions and do not serve as guaranteed properties. The seller also assumes no liability for typing, spelling and data transmission errors. Listed equipment may need to be checked separately. Due to the high mileage and/or the age of the vehicle, the sale is made with the exclusion of liability for material defects exclusively to traders, dealers or the export industry.

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 302.11.009.17, functionality: fully functional, operating hours: 2,322 h, power: 12 kW (16.32 HP), travel distance X-axis: 3,005 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 250 mm, number of axes: 5, number of slots in tool magazine: 18, actuation type: electric, total height: 2,400 mm, total length: 8,000 mm, total width: 2,500 mm, overall weight: 5,000 kg, We are offering this used Format-4 profit H350 through-feed machining center, year of manufacture 2017. CNC 5-Axis Machining Center Hodpfoyw Nciox Abkek • Manufacturer: FORMAT 4 • Model: H350 16.30 • Year: 2017 • Machine with premium configuration • Cardanic 5-axis electrospindle: 12 kW • Machine software: WOODFLASH • 18-position disc tool changer, traversing in X (H350L) • Pickup station for sawblade, traversing in X for a 350 mm blade • 9-position linear tool changer incl. tool length measuring unit • 5-color optical status indicator • Blue LED light strip, short • Safety system with foot mats, incl. pendulum mode • Automatic central lubrication • Portal drive on both sides • Large drilling head DH 24 6H 1S • Controlled central extraction connection • 6 workpiece supports with front and rear stop rows • Position display of workpiece supports and vacuum cups via laser • One vacuum connection for template milling work • Vacuum system 90 m³/h • Left-side safety fence on the machine • Enclosed cable drag chains on X and Y axes • Controlled compressed air connection for frame clamps • Vacuum and compressed air release for 6 workpiece supports • Right-side safety fence on the machine • Mobile operator terminal (instead of fixed terminal) • Lamello Clamex P Macro AB WD FLASH • F4 notching macro • 5-axis interpolation enabled • Cabinet generator design software (drawing software) • Console release with control voltage included • Includes 8 vacuum cups • Travel paths: - X: 3005 mm - Y: 1550 mm - Z: 250 mm • Machine in absolutely top condition with very low operating hours • Available immediately from March 2026 • Overall dimensions: approx. 8000 x 2500 x 2400 mm • Total weight: approx. 5000 kg - Handle for console broken and glued, see photo! - Emergency stop switch on hand control defective! Can be replaced with a spare part for approx. €100!! Frame clamps for this machine, see photo. Additional price: €2,000!! Frame clamps are installed for this machine and set up with a work station, so machining can be performed on both sides. Sale is with VAT duly shown on invoice! Machine available immediately! Machine can be inspected on site. Machine will be dismantled in 2 weeks!! Loading can be organized at extra cost. If you have any questions or need further information, please feel free to send us a message or call us.

Condition: used, mileage: 2,56,159 km, power: 62 kW (84.30 HP), first registration: 04/2008, fuel type: diesel, overall weight: 2,800 kg, color: grey, gearing type: mechanical, number of seats: 2, Equipment: ABS, central locking, electronic stability program (ESP), Special equipment: Flooring in the load/passenger compartment: wood, tailgate with glazing, high partition wall with sliding window in the load compartment, spare wheel with regular tires, sliding door on the left side of the load/passenger compartment, cab seats: double passenger seat, lashing rings in the load compartment Additional features: Driver airbag, traction control (ASR), aspherical exterior mirror, left, convex exterior mirror, right, flooring in the cab: rubber, body/bodywork: box van, body variant: standard roof, front load compartment without window, headlight range adjustment, engine 1.9 L - 62 kW TDI CAT (BRR), non-smoker package, wheelbase 3000 mm, H4 headlights, sliding door on the right side of the load/passenger compartment, seat covering/upholstery: fabric, permitted gross weight 2.80 t * VIN: WV1ZZZ7HZ8H113724 * Alternator defective Hsdpfx Ajwu Rr Hjbkjk * VAT margin scheme Tel./WhatsApp:

Condition: ready for operation (used), Year of construction: 2004, operating hours: 64,300 h, clamping force: 3,200 kN, screw diameter: 60 mm, injection weight: 723 g, total height: 2,400 mm, overall weight: 17,700 kg, This hydraulic injection moulding machine was manufactured in 2004. It features a screw diameter of 60mm and can handle a maximum injection weight of 723g. The machine supports a clamping force of 3200kn with a maximum opening stroke of 700mm. It is equipped with special features like 2xAS core pull and 6xDS hot runner control points. Ideal for robust performance in a production setting, the Arburg Allrounder Selecta 720 S 3200-2100 machine we have for sale. Contact us for more information. Additional equipment • The Wittmann robot is not included • Conveyor belt is included, protective housing only for the electrical components • No other peripherals are included. Machine Benefits Qualitative Machine Benefits • Condition: used, pump overhauled Technical Machine Benefits • Known defects: water computer and water batteries should be overhauled (no influence on function) • Machine without handling system and peripherals Extra Information Machine still under power Dimensions Hedjx D N Sbspfx Abkok Machine Depth 7200 mm

Condition: ready for operation (used), Year of construction: 2005, operating hours: 18,700 h, controller manufacturer: SIEMENS, controller model: Sinumerik, table load: 3,100 kg, overall weight: 24,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 35,000 W, tool weight: 6,000 g, number of axes: 3, This 3-axis DECKEL MAHO DMF 250 linear was manufactured in 2005. It features a robust vertical machining center with a high-speed main drive up to 40 kW and rapid traverse rates of 100 m/min on the X-axis and 60 m/min on Y- and Z-axes. The work table measures 3,100 × 900 mm with a load capacity of 3,100 kg. If you are looking to get high-quality milling capabilities consider the DECKEL MAHO DMF 250 linear machine we have for sale. Contact us for more information. Additional equipment • Safety Equipment: Monitored and locked work area door; Key switch for normal and set-up mode; Limited functions when the door is open Machine Benefits Technical Machine Benefits Hsdsx Nr Tuepfx Abkek • Feed speed: up to 20000 mm/min • Clamping surface: 3100 × 900 mm • T-slots: 9 pieces, 100 mm apart • Tool magazine capacity: 30 places • Resolution of measuring system: 0. 001 mm • Electrical connections: mains connection 3n/pe~400/230 v, 50/60 hz; power consumption 82 kva • Pneumatics: compressed air 5. 5-8 bar; air volume 25 m³/h (without cooling), +20 m³/h with cooling • Weight (kg): with accessories: up to 29280 kg Extra Information Room Temperature: +15°C to +35°C Humidity: 20-75% Tool magazine size 120 -Magazine cabinet -Tool change is performed via a shuttle -Tool holder only on request and subject to availability (extra) -Machine is a 3-axis machine (rotary table not available) A further configuration or the AB is no longer available. Z-axis brake defective, roller shutter in machine room defective, screen cable defective

Condition: ready for operation (used), Year of construction: 2007, spindle motor power: 35,000 W, controller manufacturer: SIEMENS, controller model: 840D, This 4-axis SPINNER TC 110 was manufactured in 2007. A horizontal turning machine, it offers robust performance for precision tasks. Ideal for those seeking reliable turning capabilities. Contact us for more information. The TC110 has a Profi Bus error caused by a defective itional equipment • Number of Driven Tools: 12 Hodpfx Ajx D H Akjbkek Machine Benefits Technical Machine Benefits • Maximum turning length: 1000 mm • Max turning diameter: 300 mm

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 600 mm, controller manufacturer: OKUMA, spindle speed (max.): 8,000 rpm, number of axes: 4, This 4-axis Okuma MA-400HA horizontal machining center was manufactured in 2008. It offers robust construction and precision for demanding machining tasks. If you are looking to get high-quality milling capabilities, consider the Okuma MA-400HA machine we have for sale. Contact us for more information. Additional equipment • Tool change gearbox has a defect Hodpfxox U Trvj Abkek Machine Benefits Technical Machine Benefits • Pallet size: 400x400 mm / 2 pallets • B-axis rotary table (indexable)The following repairs were made: 12/2022 – replacement of the control unit (U2319 – Replacement of the ATC gearbox 05/2022 – Replacement of the X-axis telescopic cover (H1090-0025-98-2) Replacement of small parts took place regularly (hoses, sensors, bulbs, etc.). The condition of the spindle is fine, without major damage. Until the last moment, the machine produced accurately and within tolerance. Regarding the non-functional tool change gearbox – there is increased clearance in the gearbox, so when changing the tool, when entering the spindle, it is not in the optimal spindle axis. The bearing/cam/ is probably damaged in the gearbox. Service work is performed by an authorized service for OKUMA machines.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 99 h, This Yaskawa GP25-12 was manufactured in 2021. It's a robust robot arm with a maximum payload of 500 kg and a rated torque of 2040 Nm. Weighing 260 kg, it's designed for heavy-duty tasks. If you are looking to get high-quality robotic handling capabilities, consider the Yaskawa GP25-12 machine we have for sale. Contact us for more information. • Maximum payload: 500 kg Hedpfxox D Dw Ej Abkok • Rated torque: 2040 Nm • Payload: 12 kg • Mass: 260 kgYaskawa GP25-12 robot system (less than 100 operating hours)Fully functional. No defects.1x Manipulator 6VXH25-12 YRC1000 FloorApplication: other handling1x Cable set S Robot 6m ger YRC10001x Control 6VXH12/6VXH25 YRC1000 CE MA1x Initialisation YR-1-06VXH25-A101x Teachbox JZRCR-APP01-1 YRC10001x Language German Teachbox YRC10001x Language English Teachbox YRC1000Controller consisting of:1x Foil TB General AKS-000E YRC10004x Terminal I/O NX/DX/YRC10004x Connection cable FCN 40-pin, 0.8 m, round1x Base cabinet w/ DK H=250 YRC10001x Single Variant B1x F-Pkt YRC1000 Standard setting1x F-Pkt YRC1000 Application General1x -Pkt YRC1000 General Advanced1x Initialisation YRC1000 – General1x Fkt YRC1000 Functional Safety (FSU)1x Software MotoVRC SI Edition1x Mounting kit 2 external axes YRC10002x Servopack CSRA-SDB71HA1x Cable set Crossbox Motor Int. H=2501x Cable set Crossbox Encoder int. H=2501x Crossbox cable Encoder 9m #3 #51x Crossbox cable Motor 9m #3 #5Robot accessories consisting of:1x Media connector ZSB 6VX12/25Positioner consisting of:1x Positioner ZSB, DK-500 (DX)1x E-material EKPO_1Documentation consisting of:1x Documentation Robot DE 1xPrint, 1xUSB1x 1xPaper, 1xCD in German

Condition: ready for operation (used), Year of construction: 2001, operating hours: 14,336 h, controller manufacturer: HAAS, controller model: n/a, total height: 1,473 mm, table load: 1,350 kg, number of axes: 3, This 3-axis HAAS VCE 550 was manufactured in 2001. It features a work spindle with a maximum speed of 7500 rpm, expandable to 10,000 rpm with an optional dual drive. The working area includes dimensions of 508 x 406 x 508 mm, and the table can support up to 1350 kg. Consider the opportunity to buy this HAAS VCE 550 vertical machining centre. Contact us for more information about this machine. • Clamping surface: 660 x 356 mm • T-slot width: 14 mm • T-slot spacing: 125 mm • Tool change operations: 321250 timesMachine still under power Additional equipment • Note: 4th axis is available but defective; power unit for AC servo motor for HRT160 must be replaced. Hjdpfx Absx D Eg Ujkjk Dimensions Machine Depth 2357 mm Technical Specification Through-spindle Coolant Yes

Year of construction: 2006, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SINUMERIK 840D with SIMODRIVE 611D, overall weight: 6,200 kg, number of axes: 2, Cylindrical grinding machine manufactured in 2006. This GEIBEL & HOTZ RS 1000 CU features a center distance of 1000 mm and a maximum swing diameter of 355 mm. It is equipped with an electromechanical X-axis and Z-axis, offering feed rates of up to 12,000 mm/min. If you are looking to get high-quality grinding capabilities, consider the GEIBEL & HOTZ RS 1000 CU machine we have for sale. Contact us for further details. • Current defects: • Measuring probe is defective Hsdpfxsymn Iho Abkek • Switch in the coolant reservoir for controlling the pump is defective • Axis configuration: 2-axis (X, Z) • Center distance: 1000 mm • Center height: 180 mm • Max. swing diameter: 355 mm • Max. workpiece weight: 150 kg between centers; 60 kg in chuck (including clamping device) • X-axis: • Drive: electromechanical with ball screw • Feed rate: 0.01–8,000 mm/min • Measuring system: glass scale, 0.0005 mm resolution • Z-axis: • Drive: electromechanical with ball screw • Feed rate: 0.01–12,000 mm/min • Measuring system: rotary encoder, 0.001 mm resolution • Workpiece spindle: • Motor power: 2.0 kW • Speed: 0–1000 rpm • Taper: MK5 and KK5 (DIN 55026) • Grinding spindle: • Motor power: 9 kW • Speed: 1400 rpm • Grinding wheel size (standard): 500 × 80 × 203.2 mm • Bearings: precision rolling bearings • Lubrication: lifetime lubrication • Required space: approx. 3900 × 2450 × 1800 mm • Power supply: 400 V, 50 Hz, 3-phase • Control voltage: 230/24 V • Installed power: approx. 23 kW

Condition: ready for operation (used), Year of construction: 2002, operating hours: 24,186 h, controller manufacturer: HEIDENHAIN, number of axes: 5, This 5-axis DMG DMU 100 T was manufactured in 2002. It features a Heidenhain control system and a SK40 taper. Note that the pneumatic cylinder of one of the two tool changers is defective and needs replacement. Consider the opportunity to buy this DMG DMU 100 T vertical machining centre. Contact us for more information about this machine. Hjdpfx Asx Sz Dusbkek • Spindle hours: 24,186 • Condition note: Pneumatic cylinder of one of the two tool changers is defective and needs replacement Technical Specification Taper Size SK 40

Year of construction: 2010, operating hours: 51,200 h, condition: ready for operation (used), screw diameter: 80 mm, This Krauss Maffei CX 650-3000 was manufactured in 2010. A robust hydraulic injection moulding machine, it features a screw diameter of 80 mm, 6 core pulls, and 6 pneumatic needle actuators. It includes an LRX 250 handling system with 4 vacuum and gripper circuits. Known defects include leaks and a non-regulating low-pressure pump. Contact us for more information about this machine. Hodpfxeyffcaj Abkok • Core pulls: 6 • Pneumatic needle actuators: 6 • Internal mold heaters: 12 • Cooling water circuits: 6 + 6 • Operating hours: approx. 51,200 h • Pump hours: approx. 61,500 h • Known defects: • Leaks at the upper operator-side frame • Leak at the injection unit • Low-pressure pump no longer regulates accurately Additional equipment • LRX 250 handling system • 4 vacuum circuits • 4 gripper circuits

Condition: ready for operation (used), Year of construction: 2011, operating hours: 2,265 h, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 810D Powerline, total height: 2,650 mm, table load: 600 kg, overall weight: 5,500 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis DMG DECKEL MAHO DMC 635V eco was manufactured in 2011. It features a Siemens Sinumerik 810D Powerline control system, a tool holder SK 40, and a tool magazine with 20 positions. The machine offers a spindle speed of up to 10,000 rpm and a rapid traverse speed of 25 to 30 m/min in X/Y/Z axes. Consider the opportunity to buy this DMG DECKEL MAHO DMC 635V eco vertical machining centre. Contact us for more information about this machine. • Tool magazine: 20 positions • Table size: approx. 790 × 560 mm • Notes/condition: Screen may be defective • Error message during tool change (see images) & contours/drilling patterns can no longer be programmed Additional equipment • 3D probe • Chip conveyor & coolant & miscellaneous: No chip conveyor & no internal cooling, only normal external coolant supply Hedpfxjx D D Hte Abksk Dimensions Machine Depth 2050 mm

Condition: ready for operation (used), Year of construction: 2021, operating hours: 489 h, spindle speed (max.): 3,250 rpm, spindle motor power: 33,000 W, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 2, Horizontal turning machine manufactured in 2021. This DMG MORI CLX 550 features a maximum turning diameter of 480 mm and a turning length of 1,240 mm. It is equipped with a 12-position turret and a maximum spindle speed of 3,250 rpm. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 550 machine we have for sale. Contact us for further details regarding this machine. • Main spindle • Spindle type: A2-8", AC motor • Max. torque: 630 Nm (40% duty cycle) • Bar capacity: Ø 80 mm • Working range and capacity • Max. turning diameter: 480 mm • Max. turning length: 1,240 mm • Rapid traverse (X/Z): 30 m/min • Axes: Linear guideways in all axes (size 45 mm) • Bed: Improved bed construction for stability • Tooling and turret • Turret type: VDI 40 • Stations: 12-position turret (one position defect) + 6 BT stations • Measuring system: Direct measuring system for the X-axis Hjdpeympiaofx Abkjk • Control and software • Control panel: DMG MORI SLIMline Multi-Touch • CNC: 19" SIEMENS 840D • Software: ShopTurn, 3D control technology

Condition: ready for operation (used), Year of construction: 1996, operating hours: 12,800 h, number of axes: 5, This 5-axis DECKEL MAHO DMU 50V was manufactured in 1996. It features a Millplus control system with software version DV400, an external hydraulic unit for clamping devices, and a Hainbuch hydraulic vise for BZI32 collet. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMU 50V machine we have for sale. Contact us for more information about this machine. Additional equipment • Hainbuch Hydraulic Vise for BZI32 Collet Machine Benefits Technical Machine Benefits • Machine is operated with a motor encoder due to c-axis encoder currently defective. • Internal cooling: 40 bar • External hydraulic unit for clamping devices • Counterholder on the rotary table • Rotary union on the table Hsdpfx Abex U Tineksk • Tool positions: 24 tool positions – 2 partially available (space is broken) • Measuring probe: renishaw – prepared Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2000, number of axes: 3, This 3-axis Mazak VTC-200B was manufactured in 2000 and features a rapid traverse of 36 m/min and both internal and external cooling systems. In 2019, it received a new spindle motor and spindle, along with recirculating ball screws in the X and Y axes. Consider the opportunity to buy this Mazak VTV-200B vertical machining centre. Contact us for more information. Additional equipment • chip conveyor is included Machine Benefits Qualitative Machine Benefits • 2019: new spindle motor and spindle, recirculating ball screws in x and y axes • 2024: new recirculating ball screw in x axis due to a material defect. Technical Machine Benefits • Rapid traverse: 36 m/min • Workpiece: 24-axis changer • Tools: coolant pump: 5-bar Hedpfxjyaaw Us Abksk • Tools: internal and external cooling Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2013, operating hours: 16,981 h, travel distance X-axis: 1,600 mm, travel distance Y-axis: 810 mm, travel distance Z-axis: 700 mm, overall weight: 8,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 24, number of axes: 3, This 3-axis SPINNER MVC 1600 was manufactured in 2013. It features an impressive X-axis travel of 1600 mm, Y-axis travel of 810 mm, and Z-axis travel of 700 mm. The machine includes a robust table size of 1800 x 810 mm and a maximum workpiece weight of 2000 kg. If you are looking to get high-quality machining capabilities, consider the SPINNER MVC 1600 vertical machining centre we have for sale. Contact us for further details. • Rapid traverse (X/Y/Z): 18 / 18 / 15 m/min • Table size: 1800 × 810 mm • Maximum workpiece weight: 2000 kg • Spindle torque: 109–1052 Nm • Tool magazine capacity: 24 tools • Tool changer condition: defective • Supply voltage: 400 V • Power supply: 3 / PE • Frequency: 50 / 60 Hz • Rated current (IB): 58 A Hodpeypcfmjfx Abksk • Nominal current (IN): 63 A • Hours: 16,981 h Additional equipment • Optional 4th axis for 10.000€ Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2007, operating hours: 40,522 h, controller manufacturer: MAZATROL, controller model: Matrix, total height: 3,400 mm, overall weight: 17,000 kg, This 5 axis Mazak Variaxis 630-5X was manufactured in 2007. A universal machining centre featuring a 2-pallet changer, 80-tool magazine, and a Renishaw probe. It supports a 70 bar internal cooling system, enhancing operational efficiency. Ideal for those looking to enhance their machining capabilities. Contact us for more information about this machine. • Loading method: Forklift/Crane • Known defects: Normal signs of use and wear • 80-tool magazine • Renishaw probe • 70 bar internal cooling Additional equipment • 2-pallet changer Dimensions Hjdpfx Ajx D Ewajbkjk Machine Depth 5800 mm

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, type of input current: three-phase, We are offering this ready-to-use Okuma LB15 CNC lathe, year of manufacture 1989. Noted defects: The seal on the Plexiglas door should be replaced over time. The machine is still in operation and can therefore be inspected and tested on site. Manufacturer: Okuma Model: LB15 Year of manufacture: 1989 Mains voltage: 380 V Number of phases: 3 Rated power: 21 kVA Frequency: 50 Hz Total rated current: 36 A Maximum motor current: 28 A Hsdpfxeyw Hnio Abkjk Breaking capacity: 7.5 kA Circuit diagram no.: W5000-118-068 Serial number: 5813 If you have any questions or need further information, please feel free to send us a message or call us.