Used Defective for sale (984)

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, For sale is a Cognex camera system for difficult OCR assembly verification and defect detection applications. The system never went into use and is being sold with all accessories as a set as shown in the pictures. Hedpfx Abomx Sl Tsksk The model number is IS7802-373-50-LAB // 821-10035-2R and is welcome to be researched on the internet. Digital Machine Vision Camera (2Mpixel) with PatMax RedLine + Gigabit Ethernet (GigE) - Demonstrator - COGNEX (In-Sight 7000 Gen2 Series) - 7802 - 1600x1200pixels UXGA resolution (1/1.8" CMOS monochrome scanning with global shutter) - 53fps - C-mount type / S-mount type - 7. 2GB (program; non-volatile flash memory) + 512MB (SDRAM) + 8GB (SD card) - 1 x digital input (15-28Vdc / optocoupler; isolated trigger input) + 3 x digital inputs (15-28Vdc / optocoupler; isolated discrete inputs) + 4 x digital outputs (26. 4Vdc 50mA / sink/source discrete outputs) - 8-pin M12 connector (Ethernet) + 5-pin M12 connector (supply) + 12-pin M12 connector (breakout) + Micro SD card slot - supply voltage 24Vdc - with RS-232C + Ethernet + PROFINET + CC-Link + Modbus TCP communication capability - IP67 - aluminum (die-cast) housing - compatible with Patmax redline

Condition: like new (used), Year of construction: 2015, operating hours: 9,925 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 55 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, table width: 900 mm, table length: 1,150 mm, table load: 2,000 kg, overall weight: 22,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 9,925 h, coolant supply: 80 bar, tool length: 500 mm, tool diameter: 160 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale: Top-maintained 5-axis simultaneous universal machining center Hermle C52U with a new spindle (replaced in 03/2025) and only 400 hours of operation since replacement! Year of manufacture: 2015 Control unit: Heidenhain TNC 640 Travel paths: X: 1000 mm Y: 1100 mm Z: 750 mm A: +100°/-130° C: 360° Table load: 2000 kg Clamping surface: 1150 mm x 900 mm Equipment: - Heidenhain TNC 640 control - AVD active vibration damping - ACC active chatter suppression - AFC adaptive feed control - Heavy-duty machining (HDM) - Spindle speed: 18,000 rpm Hodpfx Asygx Hnobksk - Spindle interface: HSK-A63 - 60 tool positions - 9-way rotary union - Scraper belt conveyor - A3 Blum tool breakage/tool measurement - 3D touch probe Heidenhain - Electronic thermal compensation - ICS 80 bar with paper band filter - External air blast - Internal air blast - Electronic hand wheel - Hardware kinematic option - Manual cabin door - Automatic cabin roof - Chip rinsing gun ...and much more. The machine is available immediately! The machine is in excellent condition with no defects! All services performed by Hermle! Spindle replacement also carried out by Hermle! Invoice and test protocol available!

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: E61SI18012641491, This offer is for an SCC 61 WE combi-steamer in electric version, manufactured by the premium brand Rational, year of manufacture 2018. The combi-steamer is a model from the latest SCC series, featuring triple glazing and LED lighting. The unit has undergone inspection in our in-house workshop and is fully functional. The stand shown in the pictures is not included in the offer but is available as an optional extra. RRP is €9,400 net. You will receive an invoice with VAT shown. Service: We are happy to assist you in arranging certified Rational customer service. Looking for a specific Rational device type? Contact us — we have access to a wide range of pre-owned and new equipment. We are happy to advise you on all device types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, or Pro. Our used equipment service for you: - 6-month warranty on all electrical parts, limited to the replacement of defective parts (no labor costs for removal and installation) - High-quality branded equipment at fair prices - Professional refurbishment/inspection & expert cleaning - Tested & fully functional - Shipping or self-collection, flexibly selectable - Expert advice – before and after purchase - Provision of operating manuals, wiring diagrams & spare parts - Inspection according to DGUV V3 This combi-steamer accommodates 5x 400x600 mm trays. In automatic mode, the unit independently determines the ideal cooking path, load size, the amount of food, and specific requirements for 7 applications (meat, fish, poultry, side dishes, egg dishes, baked goods, and finishing). Technical specifications: - Dimensions (W x D x H): approx. 847 x 776 x 782 mm - Minimum door opening dimensions for transport (W x H): 860 x 860 mm - Power connection: 400 V / 11 kW / 50/60 Hz - Capacity: 6 x 1/1 GN - Weight: approx. 110 kg - Serial number: E61SI18012641491 - Year of manufacture: 2018 Condition: used, inspected, fully functional Additional features: - 3 operating modes in combi-steamer mode: steam (30°C to 130°C), convection (30°C to 300°C), and combination (30°C to 300°C) - Care Control - automatic self-cleaning - Core temperature probe - Hand shower with automatic retraction - 8.5" color display and touchscreen - 5 programmable fan speeds - Integrated, maintenance-free grease separation system - Automatic start time preselection - 7 cleaning stages for unattended cleaning — including overnight - 3-level steam setting adjustable from 30°C to 260°C - 5 programmable proving stages - USB interface - Seamless, pan-shaped hygienic cooking chamber with rounded corners - Halogen chamber lighting Shipping: - Delivery or self-collection by arrangement - Worldwide shipping on request - Shipping to islands or mountain stations only by arrangement Subject to change and errors. If you have any questions, require advice, or would like to view the unit in person, you can reach us by phone during our business hours: Hsdpfxsyu S N Se Abkek Monday-Friday 09:00–13:00 and 14:00–17:00. Sales are subject exclusively to our general terms and conditions (GTC).

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 1 Belt sanding machine with combination unit with electronic segmented pressure beam for sanding soft and hard veneers Calibrating and fine sanding of solid wood Calibrating workpiece carrier boards Sanding defective veneers and lacquers Intermediate sanding of PU, hydro, UV, nitro, and polyester coatings Sanding barrier films with graphical control terminal NC-controlled thickness adjustment from 3 to 150 mm Calibrating roller can be activated via terminal with patented CSD segmented pressure beam for compensation of workpiece tolerances up to 2 mm Sanding width: 1100 mm Abrasive belt length: 2150 mm Abrasive belt speed, frequency-controlled: approx. 2–18 m/sec Sanding unit drive: 15 kW Feed speed: 5/10 m/min Compressed air: 6 bar Compressed air requirement: 15 NL/min Belt blasting: 490 l/min Extraction connection: 180 mm Air requirement for sanding unit: 1800 m³/h Required air velocity: 20 m/sec Total power connection: approx. 17 kW Weight: approx. 2000 kg Hedpfsyulfmjx Abksk Dimensions (W x D x H): 1840 x 1670 x 2200 mm Availability: short-term Location: Röllbach

Year of construction: 2021, condition: new, functionality: fully functional, machine/vehicle number: CCW-RV-214W-1S/05-SS, Automatic FARMALINE packaging line with exceptionally precise dosing systems for liquids or dry products, interconnected by a shared module for labeling and packaging. The entire process line is integrated via a single transport system, enabling alternate modes of operation. Pharmaceutical-grade finish – all components in contact with the product are manufactured from materials approved for the pharmaceutical industry (e.g., AISI 316L, PTFE), ensuring easy cleaning. 100% in-process control using a detection and reject system at every production stage to remove defective items. Integrated production management system (3 access levels, production orders, operating parameters, process reporting). Operating speed in both modes: 25 packages/minute. Key features: Liquid dosing: ✓ Working range and accuracy: 2–20 ml ±1% ✓ Automatic container (bottle) feeding using cobot system ✓ Clean compressed air bottle rinsing system before filling ✓ Weight measurement of the container (bottle) before and after liquid dosing ✓ Dosing using 4 piston pumps ✓ Drip elimination system after dosing process ✓ Rejection of incorrectly dosed products ✓ Automatic bottle capping with torque and pipette presence control (if required) Powder product dosing: ✓ Working range and accuracy: 1–100 g ±1% ✓ Automatic container (jar) feeding via conveyor with separator ✓ Combination weigher with high-precision dosing system (accuracy: 0.025 g/weigh cell) depending on target dose ✓ Checkweigher with reject system for out-of-spec products ✓ Automatic jar closing with torque control ✓ Container sealing using induction liner sealing inside jar lids ✓ Weighing mode and bypass mode for liquid dosing operation Shared module – labeling: ✓ Container feeding on conveyor with separator ✓ Label printing with OCR print verification ✓ Label application on containers (bottles and jars) with presence control ✓ Reject line for products without labels or with incorrect imprint ✓ Accumulation table for packaging operations, dimensions: 220 cm x 100 cm The packaging line may be supplied with or without the combination weigher. Automatic combination weigher for dry product dosing. Top loading and subsequent portioning via 14 weighing cells, in which the system selects the cell combination that best matches the target product weight per cycle. Exceptional accuracy due to precise weighing cells (single cell error: ±0.025 g). Key features: Hjdpfx Absywk Dnekok ✓ Working range and accuracy: 1–100 g ±1% ✓ Operating speed: 25 cycles/minute ✓ High-precision feeding system, accuracy: ±0.025 g/weigh cell ✓ Maximum single portion error: ±0.1 g (by combining up to 4 weigh cells to achieve the target portion) ✓ HMI touchscreen control panel, 3 access levels ✓ Ability to create product programs with preset operating parameters ✓ Production reports for each batch ✓ Integration capability with upstream machinery or conveyor via control signal exchange ✓ All parts in direct contact with the product are easily removable

Condition: used, functionality: fully functional, machine/vehicle number: H2X396J00939, Year of construction: 2018, operating hours: 14,083 h, load capacity: 8,000 kg, lifting height: 3,670 mm, fuel type: diesel, mast type: simplex, construction height: 3,180 mm, power: 84 kW (114.21 HP), fork carriage width: 2,180 mm, empty load weight: 13,845 kg, total length: 3,350 mm, drive type: Diesel, construction width: 2,180 mm, Diesel forklift Chassis number: H2X396J00939 Load center: 900 ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Standard Transmission: Linde Hydrostat Condition: Limited operability Hsdpfoyvauxjx Abksk Technical condition: Normal Front tires type: Super elastic Front tires size: 8.25-15 Front tires condition: 0 - 20% Rear tires type: Super elastic Rear tires size: 300-15 Rear tires condition: 0 - 20% Description: The unit is sold as-is. The mast shows some play. Common defects and signs of wear are present (hydraulic hoses, bearings, pins, etc.). We offer the forklift in functional condition, but without a UVV (accident prevention regulation) inspection. 3rd valve, half cabin, safety light, rotating beacon.

Condition: new, functionality: fully functional, empty load weight: 12,000 kg, maximum load weight: 80,000 kg, overall weight: 92,000 kg, tire size: 245/70 R 17.5, Year of construction: 2026, chassis model: Lider Heavy-Duty Chassis, Equipment: ABS, Heavy-Duty New Lowbed Semi- Trailer. Lider Trailer for Heavy-Duty Trailers High-Quality and Durability Manufacturing EU Standards. EBS or Double Line Brake Systems. One-year Warranty for Manufacturing Defects. Customer Requested Colour. 2026 Production Hsdporcif Hefx Abkek

Condition: new, functionality: fully functional, empty load weight: 10,000 kg, tire size: 235/70 r 17.5, Year of construction: 2026, operation weight: 50,000 kg, chassis model: Lider Heavy-Duty Chassis, Equipment: ABS, Heavy-Duty New Lowbed Semi- Trailer. Lider Trailer for Heavy-Duty Trailers. Hjdpfx Abjrdd Hheksk High-Quality and Durability Manufacturing. EU Standards. Double Line Brake Systems. One-year Warranty for Manufacturing Defects. 2026 Production Customer Requested Colour.

Condition: used, maximum load weight: 13,400 kg, overall weight: 16,000 kg, first registration: 01/2007, loading space length: 7,260 mm, loading space width: 2,460 mm, loading space height: 2,730 mm, loading space volume: 48 m³, total width: 2,550 mm, total height: 2,980 mm, Year of construction: 2007, Vehicle No. G0123253_1 – Manufacturer: Spier. * Double corner fittings * Forklift accessible * Fixed support legs Hjdpfx Aoyu Ny Iobkjk * Rail loading equipment * Lashing points Delivery time: IMMEDIATE. Technically ready-to-use condition with no further repairs required. Chassis galvanized. Swap body in defective condition (see pictures). Dimensions are approximate. Offer is non-binding, subject to prior sale, prices are net ex location D-59302 Oelde. Further details upon request by phone or email:

Condition: used, maximum load weight: 13,580 kg, overall weight: 16,000 kg, first registration: 01/2013, loading space length: 7,280 mm, loading space width: 2,480 mm, total width: 2,550 mm, Year of construction: 2013, Wagon No. G0113391_1 – Manufacturer: Krone. * Simple corner fittings * Fixed support legs * Lashing recesses * Lashing options Availability: IMMEDIATELY. Technically operational condition without further repairs required. Subframe shows signs of wear and partial rust formation. Isolated paint flaking on parts of the swap body. Occasional rust on swap body components. Deformations/impacts on certain components—see pictures. Swap container is in defective condition (see pictures). Hsdeyu Nynopfx Abksk Dimensions are approximate. Offer is subject to prior sale; prices are net ex-works D-59302 Oelde. Further details available upon request by phone or email.

Condition: used, Year of construction: 1976, pressing area: 2500mm x 1250mm opening: 360mm heating plate top: elektric heating plate bottom: defective plate surface: ALU - anodized pressure: 90t Hsdpjx Edl Eofx Abkjk number of cylinder: 4 electricity: ca. 33A machine length: 3000 mm machine width: 1500mm weight: 4000kg

Condition: repair required (used), Year of construction: 2009, functionality: not functional, number of ink cartridges: 8, color channels: 8, number of print heads: 16, Our well-maintained Vutek 5330 EC has been continuously serviced by our in-house technician and upgraded with several features. We are the original owner! For example, the machine comes with an additional take-up unit and several extra rollers. There are also loading aids included, making it possible to load the printer with just one person. The rollers are in excellent condition, and the machine is perfectly level. Belts and hoses have been replaced regularly. Unfortunately, at least one mainboard is defective (possibly two), and the machine does not boot up properly. We still have one replacement board as well as spare parts from the original package. The printheads have been removed and thoroughly cleaned. Of course, the cleaning device is included as well. With a little attention and minor investment, it can be reliably restored to operation. We are restructuring our business and will no longer be using a 5-meter printer. Hjdpfx Absxdcrzsksk

Condition: ready for operation (used), Year of construction: 2007, controller manufacturer: SIEMENS, controller model: n/a, This KALTENBACH SKL 450 NA Circular Metal Saw was manufactured in 2007. It features a vertical saw principle with a rotating table for mitre and longitudinal cuts up to 180 degrees. The saw unit is mounted beneath the table, ensuring optimal cutting range utilization. It includes a hydro-pneumatic saw blade feed and a large viewing window for enhanced work area visibility. Ideal for sawing aluminum and non-ferrous metals. Contact us for more information about this machine. Machine Benefits Qualitative Machine Benefits • No defects; the system was refurbished in 2024 and is in like-new condition. / scope of delivery: machine without extraction system, including technical documentation (2 copies in binders) Technical Machine Benefits • Sawing of solid material made of aluminum and aluminum alloys / sawing of profiles, tubes, and flat material / right-angled and mitre cuts up to ±45 degrees / in combination with a length stop, up to ±90 degrees / slot cutting • Rotating table for mitre and longitudinal cuts, with a rotation range of 180 degrees / rotary table adjustment: manually continuously adjustable ±90 degrees • Comes with 450 mm carbide-tipped saw blade, standard tooling, and coolant system / saw blade diameter (standard): 450 mm / kerf width (max. ): 4 mm / saw blade types: carbide-tipped saw blade (hm) / high-speed steel saw blade (hss) / saw blade mounting: mounting hole according to din 8576 • Cutting speed (with 400 mm blade diameter): two-step with v-belt: 1950 / 3900 m/min / feed speed: continuously adjustable: 0–3500 mm/min /rapid return speed: 4500 mm/min • Electrical connection power (two-step with v-belt): 3. 7 / 4. 7 kw (optional: 4. 7 / 6. 3 kw) / compressed air supply: 6–8 bar Hjdpfx Abeyuum Tokjk • Weight: 1480 kg / dimensions (l × w × h): 2700 × 1450 × 1900 mm • Electrically adjustable stroke limit for the saw feed / hydro-pneumatic saw blade feed, infinitely adjustable / rapid return stroke for short cycle times / large cabinet-style door for easy saw blade change, electrically interlocked / protective machine hood with large viewing windows, electrically secured / automatic minimum quantity lubrication (mql system)

Condition: used, CNC / Milling Clamping Devices – Comprehensive Lot approx. 150 kg Description For sale is a comprehensive package of clamping devices suitable for CNC milling machines as well as conventional machining. This package comes from our workshop inventory and includes a wide variety of clamping and fixturing components that can be used universally in manufacturing, tooling, or maintenance applications. Due to the quantity and diversity, the lot is ideal as a basic set or to supplement existing clamping equipment. — Scope of Delivery (mixed package) • Clamping claws in various sizes • Fixture blocks and clamping pieces • Round holders / clamping plates • T-slot nuts and fastening elements • Screws and accessories • Various fixtures and single components Total weight: approx. 150 kg Sale is preferably as a complete package. — Condition • Used • Fully functional • Mixed assortment • Partially with signs of use — Hedpsyx Hguefx Abkek Commercial Notice The total value of comparable individual components is significantly higher than the asking price. This package offers a cost-effective opportunity to acquire a comprehensive set of clamping equipment. — Location & Collection Location: Eisenach Collection preferred (due to weight), but shipping by freight forwarder is possible upon request: €90 Loading by arrangement possible The sale is made with the exclusion of any warranty and liability for material defects. The clamping devices are purchased as seen.

Condition: used, mileage: 1,24,928 km, power: 62 kW (84.30 HP), first registration: 06/2011, fuel type: diesel, empty load weight: 1,762 kg, maximum load weight: 1,038 kg, overall weight: 2,800 kg, axle configuration: 4x2, wheelbase: 3,000 mm, next inspection (TÜV): 06/2025, fuel: diesel, CO₂ emissions: 190 g/km, fuel consumption (urban): 9.4 l/100km, fuel consumption (extra-urban): 6 l/100km, fuel consumption (combined): 7.2 l/100km, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, number of seats: 3, total length: 4,892 mm, loading space length: 2,501 mm, Year of construction: 2011, construction height: 1,970 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, traction control, Engine damage. The Volkswagen T5 Transporter 2.0 TDI with Euro 5 emissions standard is a used panel van suitable for commercial operations. This vehicle is equipped with a 4-cylinder diesel engine with a displacement of 1,968 cc, delivering 62 kW (84 hp). The transporter features a manual 5-speed transmission and has a truck registration, making it ideal for a wide range of transport applications. First registered in June 2011 and with a mileage of 124,928 km, the van has an average fuel consumption of 7.2 l/100 km and CO2 emissions of 190 g/km. Twin sliding doors facilitate loading and unloading, while the green emissions sticker allows access to city areas with low-emission zones. The vehicle seats up to three people and is finished in the distinctive shade of Ginstergelb (broom yellow). There is an engine defect, which may affect the price. Viewings are possible during listed opening hours without prior appointment. Sale exclusively to business customers (agriculture, freelancers, small and large businesses) or for export. Subject to error and prior sale. Hjdpsyntkdjfx Abkok

Condition: used, Year of construction: 2026, Special Price - Showroom Machine Garbsen Our Machine Concept WL 6 The Weima High-Performance - Shredders with their flexible application possibilities can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer scraps, etc.) into fuel chips, achieving enormous volume reduction of material for bulky items. Functionality: The machine is equipped with a large feed hopper and can be fed with a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees continuous and cost-effective material feeding without the need for manual assistance. The hydraulically controlled pusher supplies the wood waste to be shredded to the cutting area of the rotor and is automatically and load-dependently controlled. The internal pusher guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are suspended in a cardanic way to avoid lateral forces on the piston seals. The patented and profiled V-rotor made of solid steel has a diameter of 252 mm and operates with a rotor speed of 80 - 120 rpm. The concavely ground, aggressive, and 4-times reversible knives / cutting crowns are located in milled knife pockets on special knife holders; this patented system guarantees high throughput performance, low energy consumption, and optimum discharge of shredded material by reducing the cutting gap between counter knife and rotor for the first time. The screen located under the rotor determines chip size (10 - 100 mm ). A hydraulically opening screen basket is available upon request. Power transmission from the electric motors is via V-belts to a heavy-duty gearbox mounted on one end of the rotor shaft. Precise cut at high throughput with profiled V-rotor The specially developed by WEIMA V-rotor can be used universally and is made from solid material. Its aggressive material intake with up to two rows of knives guarantees high throughput with low power requirements. It can be equipped with hardened steel cutting knives with edge lengths of 30 mm and 40 mm. These can be turned several times in case of wear, which drastically reduces maintenance costs. Intuitive operation via Siemens PLC control with touch display To ensure that the electronics are optimally matched to the machine, we design, build, and wire our control cabinets ourselves. We use only high-quality components – for example from Siemens or Rittal. Intuitively operated touch surfaces guarantee quick adjustments. Functions such as setting the pusher stroke or stop ensure high throughput. The built-in overload protection also prevents defects on the machine. Technical Specification WL 6Feed opening 800 x 1,250 mmHopper capacity 0.9 m³Rotor length 800 mmRotor diameter 256 mmDrive power 22 kWRotor speed 90 rpmMax. number of knives 42 piecesKnife type and size concave / 40 x 40 mm, cutting crownsScreen perforation 10-60 mmPaint finish WEIMA Standard RAL 2022 / 7016Connection value 400 V +/- 5% / 50 HzWeight approx. 1,600 kgIncluding: - Control cabinet* (Rittal) incl. electrical control (Moeller/Siemens) and S Hodpfx Ajytrkgobksk

Condition: used, Year of construction: 2016, operating hours: 16,912 h, 2016 | Caterpillar 966M | Used Wheel Loader | 16912 hours 📍Location: Germany Hjdpfsytnixex Abkok 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 63500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 51 inspection points 42 approved ✅ 8 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: It s a 16k hours wheel loader. The engine went on high rpm for a while, it could be due to weak batteries, after it went back to normal. Pump doesn’t make weird noises. No major defects 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40332 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, operating hours: 22,327 h, Fiat-Hitachi Fh 220 | Used Tracked Excavator | 22327 hours 📍Location: Germany, Meppen 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 15000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Hedex N Havspfx Abkok 👷‍♂️ Inspected by an independent expert 63 inspection points 37 approved ✅ 19 imperfect ℹ️ 7 issues ⚠️ 📌 Inspector's Comment: Heavily used machine. Air conditioning not available. Windshield wiper is defective. Ventilation of the hydraulic oil is defective. Operating hour meter is defective; no reliable information available. Track shoes can be cut at an additional cost to reduce transport width. The year of construction is unknown and cannot be verified. The operation manual states 1980 or 1990, but this cannot be confirmed. The operating hour meter is from another machine, the displayed hours are incorrect. The machine has possibly between 20,000 and 30,000 hours. The cabin has been replaced and is not original. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39638 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: Zeile 270, used inline automatic 3D X inspection system (AOI) for assembled PCBs. Defect types: misalignment, bent pins, etc. Multiple units are available, manufactured between 2013 and 2016. ----- Hodpfxowzv Itj Abkok Please indicate your offer price. Sale only within Europe (EU), including Turkey, United Kingdom, and Switzerland. ----- Technical specifications can be found in the handout. Without packaging; all warranty rights are excluded. If you intend to dismantle the equipment yourself, please mention this in your offer. We make no guarantees regarding the accuracy of technical data, completeness of accessories and tooling, or compliance with all safety and environmental protection requirements as outlined in accident prevention regulations.

Condition: used, functionality: fully functional, Year of construction: 2023, Doming System / Epoxy Resin Doming Machine for Magnet, Sticker & Label Production – Print Finishing & Promotional Item Manufacturing – Accessory Package Optional For sale is a manual doming system for the professional production and finishing of magnets, stickers, labels, signs, emblems, and other promotional items using 3D epoxy resin (liquid doming). Ideal for print shops, promotional item manufacturers, label producers, or small craft businesses looking to refine their print products with a premium finish and expand their product portfolio. The machine enables the creation of durable, scratch-resistant, and visually appealing 3D surfaces – perfect for magnet products, stickers, nameplates, logos, emblems, and custom-made items. The machine is currently in operation and will be available from March 2026. Original purchase price in October 2024: EUR 10,000. Invoice is available. Hsdjyi Ukujpfx Abkjk Optional accessories (can be included upon request): - Victoria platen die cutter – motor defective, ideal for technically skilled hobbyists or for repair – free of charge - Laminating machine – price negotiable - 2 drying racks – price negotiable - Approx. 50 steel plates for production – price negotiable Of particular note: For questions or during ongoing operation, Neumann Company provides very reliable support via WhatsApp chat, voice, or video. I have always received prompt assistance. The support is quick, straightforward, and solution-oriented. If you have questions about the machine or accessories, I am also happy to help at any time. Viewing by appointment is possible.

Condition: used, Year of construction: 2019, operating hours: 5,900 h, Equipment: all wheel drive, soot filter, For sale: Caterpillar D6 LGP Dozer with 3D GPS I am offering a reliable and robust Caterpillar D6 LGP dozer for sale. The machine is in very good technical and visual condition and is ready for immediate use. Technical Data: * Model: Caterpillar D6 LGP * Operating hours: approx. 5,900 * Undercarriage: well maintained, operational * Power: powerful and efficient * Weight: approx. 20 tons (depending on configuration) Equipment: * Wide LGP undercarriage for low ground pressure * Comfort cabin with heating and air conditioning * Joystick control for precise operation * Fully functional hydraulic system * Regularly serviced Condition: The machine runs perfectly and has always been well maintained. No known technical defects. Hsdpfx Ajyx R H Ejbksk Ideally suited for earthmoving, dyke construction, grading, and many other applications. Inspection & Transport: * Location: Bergkamen * Inspection by appointment possible * Transport can be arranged

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Dimter / Weinig OptiCut 450 Quantum Optimizing Cross-Cut Saw Hodpjyu Urisfx Abksk Manufacturer: Dimter / Weinig Model: OptiCut 450 Quantum Year of manufacture: 2006 Machine description: For sale: Dimter / Weinig OptiCut 450 Quantum optimizing cross-cut saw, year 2006, designed for high-speed and precise cross-cutting of timber with yield optimization. The Quantum version is one of the top models in the OptiCut 450 series and was developed for industrial use with extremely high output, precise positioning and reliable material transport. The machine is suitable for fixed-length cutting, defect cutting and production optimization. The OptiCut 450 series was designed for integration with scanners, sorting systems and automatic handling equipment. Typical Quantum features include VarioSpeed infeed, HighGrip feed rollers, an independent length measuring system and a servo-controlled intelligent waste gate. Technical data: - capacity: up to approx. 540 cuts/min - feed speed: approx. 300 – 415 m/min - maximum workpiece length: approx. 6.3 m - saw blade diameter: 450 mm - maximum cutting width: 235 mm - maximum cutting height: 100 mm - working height: 900 mm - motor: 7.5 kW - air consumption: approx. 1200 NL/min - cutting accuracy in the OptiCut 450 series: approx.± 0.8 mm Features / advantages: - extremely high cutting performance - high positioning accuracy - VarioSpeed system reducing gaps between boards - HighGrip rollers for secure material transport - servo-controlled waste gate - suitable for integration with scanners and sorting lines - proven Weinig / Dimter technology for continuous industrial production Condition: very good Note: Technical details may vary depending on the exact machine configuration, control version, handling equipment and installed options.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Dimter / Weinig OptiCut 350 Optimizing Cross-Cut Saw Manufacturer: Dimter / Weinig Model: OptiCut 350 Year of manufacture: 2004 Machine description: For sale: Dimter / Weinig OptiCut 350 optimizing cross-cut saw, year 2004, designed for fast and precise cross-cutting of timber with optimization function. The OptiCut 350 belonged to Dimter’s high-performance series and was used for fixed length cutting, defect cutting and timber yield optimization. The machine is suitable for joinery shops, sawmills, pallet production, furniture components and general industrial timber processing. Depending on configuration, the machine may include optimization software, automatic infeed, loading stations and barcode optimization. Technical data: - Machine type: optimizing cross-cut saw - Maximum cutting height: approx. 120 mm - Maximum working cross section: approx. 235 x 12 mm or 120 x 100 mm - Minimum timber width: approx. 30 mm - Maximum feed speed: up to approx. 350 m/min - Infinitely variable feed: yes - Frequency-controlled cutting speed: yes - Saw motor power: 7.5 kW - Positioning accuracy: approx. 2 mm - Optimization program: yes Features and advantages: - High cutting performance - Automatic material positioning - Possibility of yield optimization - Proven Dimter / Weinig technology - Suitable for continuous production Hedpfsyu Uq Ejx Abkek - Good solution for industrial timber processing Condition: good Note: Technical details may vary depending on the exact machine configuration, optional equipment, table length and control version.

Condition: used, maximum load weight: 2,820 kg, overall weight: 4,500 kg, axle configuration: 1 axle, first registration: 06/2010, loading space length: 8,100 mm, total width: 2,550 mm, total height: 3,850 mm, Vehicle description: For sale is a well-maintained Müller curtain side and post trailer in very good technical condition Features & details: * Manufacturer: Müller FZ-Bau Hedpfx Aexar Ahjbkok * Model: SDAH Curtain Side & Post Trailer * Year of manufacture: 2010 * Twin axle * Gross vehicle weight: 4,500 kg (upgradable to 5,500 kg) * Unladen weight: approx. 1,820 kg * Payload: approx. 2,680 kg * Tyres: 235/75 R17.5 143/141J * Inspection / TÜV: valid until * Very stable build with curtain side and posts Condition: * Well-maintained, immediately ready for use * No known defects

Condition: used, For sale or free of charge are three climate smoke chambers manufactured by AUTOTHERM, including accessories. These units are ideally suited for meat and food processing, particularly for cold smoking. Technical Data / Features: Chamber 1: approx. 8 racks (W approx. 2.10 m x D 5 m) Chamber 2: approx. 10 racks (W approx. 2.10 m x D 6 m) Chamber 3: approx. 12 racks (W approx. 2.10 m x D 7 m) Cold smoke system with 2 smoke generators (Goliat, sawdust) Temperature range up to approx. +22 °C (hot water heat exchanger) Hedpeyw Hl Ijfx Abkjk Humidity control available Cooling coil (R232, R404) Some refrigerant compressors present Construction: Air ducts, wall cladding, and control cabinet made of V2A (stainless steel) Condition: Electronics/control currently non-functional Control cabinet available Condition as shown in the pictures Additional equipment / accessories: Smoking sticks (wood) 2 kettles Cooking chamber (for 2 racks) Cleaning machine (defective) Freezer Important notes: Available free of charge Dismantling and transport to be organized by the buyer Inspection possible by appointment