Used Defective for sale (1,079)

Condition: used, Year of construction: 2008, Overview This electronic empty bottle inspector (EBI) for returnable glass bottles was manufactured in 2008 by Germany HEUFT. The machine is designed for inspection of returnable glass bottles in beverage production lines. It is currently still installed and can be visited on request. Technical data - Capacity: up to 60,000 bottles/hour (machine) / up to 54,000 bottles/hour (filler) - Formats: 20 cl returnable glass bottles (Coca-Cola, multiproduct, Sprite formats) - Application: Empty bottle inspection (returnable glass bottles) - Configuration: Single-lane installation between bottle washer and filler - Inspection technology: HEUFT reflexx inspection system - Inspection systems: - Base inspection (foreign body detection) - Finish inspection (mouth / finish defects) - Double sidewall inspection with 90° rotation - Residual liquid detection (Dual High Frequency + Infrared) - Detection & rejection: - Detection of fallen, tilted, higher or lower bottles - DELTA reject system - Vision system: Pedpfx Aisy Ucy Nerorc - CCD matrix cameras - 32-bit image processors - Stroboscopic lighting with microprocessor control - Control system: HEUFT SPECTRUM multiprocessor control - Operator interface: HEUFT PILOT LCD terminal with membrane keyboard and LED counter display - Construction: Stainless steel and synthetic material housing - Additional features: - Encoder for conveyor speed monitoring - Automatic air-blow cleaning system - Pre-programmed bottle formats with additional programs

Condition: used, mileage: 1,53,000 km, power: 70 kW (95.17 HP), first registration: 12/1992, overall weight: 3,200 kg, fuel type: diesel, color: red, next inspection (TÜV): 12/2025, gearing type: mechanical, Year of construction: 1992, total length: 5,345 mm, total width: 1,975 mm, total height: 2,680 mm, number of seats: 9, Equipment: had accident, parking heater, Original German vehicle. In service with a small municipality until 2026, initially with the fire department and then with the municipal depot. This vehicle has a civilian truck registration as a "closed-body truck" and the papers indicate a total of 9 seats. The vehicle was initially used as a multipurpose vehicle (MZF), and later the municipality's lawnmower was transported in it. Only one bench seat is permanently installed. Two of the three bench seats were not needed in recent years and are included as loose items. The seatbelts and mounting screws are also included in their original condition. A folding table with a radio headset is still mounted on the left side, and an original large fire department first-aid kit is integrated into the interior. Engine: OM 602, 5-cylinder naturally aspirated diesel with 2874 cc. The engine always starts perfectly and initially runs smoothly, but after approximately 20 seconds of idling, the idling performance deteriorates significantly, and smoke starts to appear. When the engine reaches operating temperature, the smoke decreases, and the engine runs smoothly again, almost normally. The engine is either severely worn or has an engine malfunction. No precise diagnosis has been made yet. The vehicle starts immediately and functions well, and the usual engine power was fully available during a short test drive, but we do not guarantee its drivability. A repair is certainly necessary in the short term! For driving short distances or loading onto a RORO ship in the port heading to Africa, this 310 D appears to function without any problems. 5-speed manual transmission. 127 km/h. Ball-type trailer hitch with a 2000 kg braked or 750 kg unbraked towing capacity. Power steering. Original Mercedes/Eberspächer auxiliary heater (operational). Body with individual rust spots; overall, it is still relatively well-preserved due to being stored in a garage for many years. The window of the passenger door is damaged and covered with a film. The paintwork has been repaired in black around the lower part of the vehicle. Apparently, the car was always very well maintained at the fire department, but unfortunately not afterwards! The running board on the sliding door – which is still visible in the photos – has been removed for use on another vehicle and is no longer present. Pjdpfx Aeyx N Hqsirerc Unladen weight: 2370 kg. Permissible total weight: 3200 kg. Overall vehicle dimensions: Length 5345 mm / Width 1975 mm / Height 2680 mm. The tires (205R14C) are from 2013 and are not porous, with approximately 50-60% tread depth. The vehicle is primarily intended for export or for genuine fans of the Bremen transporter who are looking for a completely unaltered base for restoration. The TÜV (technical inspection) expired in 12/2025 and will not be renewed. We have deliberately kept the purchase price attractive, as comparable vehicles in good condition are now usually sold for twice the price or even higher. A personal inspection is highly recommended due to the defects and can be arranged by appointment. This offer is only valid for commercial businesses, freelancers, and emergency services of all kinds. Unfortunately, sales to private end consumers are generally excluded. Subject to prior sale and errors. The purchase price is gross = net, with no VAT (according to §25a UStG / differential taxation).

Condition: used, Year of construction: 1998, Working width 1350 mm Number of sanding units x st. Used Machine Year of manufacture: 1998 Condition: Overhauled by a Heesemann factory technician, including a new feed belt Features and Technical Specifications: - 1 automatic belt sander with combination unit - with electronic articulated pressure beam - for sanding soft and hard veneers - calibrating and fine sanding solid wood - Calibration of workpiece carrier panels - Removal of defective veneers and coatings - Intermediate sanding of PU, hydro, UV, nitro, and polyester coatings - Sanding of barrier films - With graphical operator terminal - NC-controlled thickness adjustment from 3 to 150 mm - Activation of the calibration roller via the terminal - With patented CSD articulated pressure beam for compensating workpiece tolerances up to 2 mm - Sanding width: 1,350 mm - Sanding belt length: 2,150 mm - Frequency-controlled sanding belt speed: approx. 2–18 m/sec - Sanding shoe width: 100 mm - Sanding unit drive: 15 kW - Feed speed: 5/10 m/min - Compressed air: 6 bar - Compressed air consumption: 15 NL/min - With belt dust extraction: 490 l/min - Exhaust ports: 1 x 180 mm, 2 x 100 mm - Air requirement for grinding unit: 1,800 m³/h - Required air velocity: 20 m/sec - Total power connection: approx. 17 kW Pedpfx Aiszk Nxzorerc - Dimensions: 2090 x 1670 x 2020 mm - Weight: approx. 2500 kg

Condition: used, mileage: 8,78,193 km, power: 220 kW (299.12 HP), first registration: 09/2010, fuel type: diesel, number of seats: 33, gearing type: automatic, emission class: euro5, color: white, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, In accordance with our “General Terms and Conditions,” without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis until the conclusion of the sale, subject to errors, typos, and prior sale: Mercedes Benz Citaro NF O530 bus, 33+57+1 (Vehicle 315) First registered: 20.09.2010 878,193 km Engine: 11,967 ccm 220 kW / 352 hp Euro 5 EEV Permissible gross vehicle weight (GVW): 18,000 / 20,900 kg Pjdpfx Aiozztrmorsrc Unladen weight: 11,789 kg Payload: 6,211 kg Axle load front: 7,245 kg, axle load rear: 11,500 kg Overall length: 11,950 mm, overall width: 2,550 mm, overall height: 3,400 mm 33+57+1 seats (sitting / standing / wheelchair / stroller) Ramp at the second double door for strollers and wheelchairs Air conditioning, heating, auxiliary heating Double doors front and rear Microwave Fully automatic transmission LAWO Without cash register Radio/CD Electric windows Emergency exit Electric mirrors + mirror heating Engine slightly oily, malfunction indicator for brake control, currently being investigated, either the sensor on the brake caliper is defective or the cable is defective Various signs of wear, consistent with the age Not a new vehicle, the vehicle was in regular service until it was taken out of operation Full air suspension Fully automated Tires 275/70R22.5, approximately 90% remaining in the front, approximately 30% remaining in the rear Price: €5,500.00 (net) All information is provided without any guarantee or warranty. Our “General Terms and Conditions” apply. The place of jurisdiction for both parties for disputes up to €10,000 is the local court of Ludwigslust; for disputes exceeding this amount, it is the regional court of Schwerin. Subject to errors, typos, and prior sale.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: AB0704, travel distance X-axis: 810 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Siemens Sinumerik 810D, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range X-axis: 810 mm Travel range Y-axis: 610 mm Travel range Z-axis: 610 mm Workpiece weight: max. 1,000 kg Table load: 1,000 kg Spindle speed: max. 8,000 RPM Number of tool positions in the tool magazine: 32 MACHINE DETAILS Control model: Siemens Sinumerik 810D Total weight: 5,000 kg Input voltage: 400 V Type of input current: Three-phase EQUIPMENT CE marking Chip conveyor Prsdezzx Hcjpfx Airjc Spindle speed continuously adjustable 20 bar spindle cooling Paper filter Shopmill Note: The machine has been regularly maintained. One slot in the tool changer is defective.

Condition: ready for operation (used), Heidenhain UM 112 inverter, ID: 325 001-02, serial number: 10775502A – complete with test report, professionally overhauled and tested, with a 3-month warranty, 100% functional. Scope of delivery as shown in the photos. Please note: In the exchange process, your defective unit must not have any mechanical damage, such as breakage, as these cannot be repaired. In such cases, an additional charge of €1000 (including VAT) will be applied. Prodpezv Hrcofx Airjc Attention: You are bidding on a Heidenhain UM 112 inverter, ID 325 001-02, serial number 10775502A, as part of an exchange service. It has been professionally completely overhauled and tested and comes with a 3-month warranty. It is 100% functional. The scope of delivery is as shown in the photos. In both the repair and exchange procedures, your defective unit must not exhibit any mechanical damage, such as breakage, as these are no longer repairable. In this case, a subsequent invoice of €1000 (including VAT) will be issued.

Year of construction: 2020, condition: used, functionality: fully functional, Flow rack with picking aid Rack information: - 131 product compartments + 4 return compartments: - 5 units from left to right (1st unit: 26 compartments / 1 return. 2nd unit: 28 compartments. 3rd unit: 26 compartments / 1 return. 4th unit: 26 compartments / 1 return. 5th unit: 25 compartments / 1 return (originally 26 compartments / 1 return)) - 5th unit - 25 compartments, accessible with Strödter lifting aid - The supermarket can also be modularly assembled in other widths and with different compartment layouts. - At the beginning of 2025, 4 compartments were converted to reinforced rollers and an extended insertion area. - Manufacturer: AQS Logistic Systems GmbH; Siemensstraße 5; 57290 Neunkirchen - Year of manufacture: 2020 - Dimensions: Depth: 12m / Width: 5 units, each 7.5m --> Total width: 38m - Shelves: Dimensions: 800x400x20 L/W/H, 294 pieces, new and original packaging available. - Spare parts available - Attention! Rollers are partially defective. Lifting aid information: - The picking aid from Strödter Handling Technology GmbH was manufactured in 2023. Its gripper can be pivoted from top to bottom (90°C) and was designed for removing toilet bowls from the rack. The toilet bowls were removed from the flow rack using the lifting aid, tilted by 90°, and placed on a tray on a pallet. - Thanks to a new gripper, the lifting aid can also be used for any products. The maximum load capacity is 45 kg. Additional information: The flow rack and the lifting aid can also be purchased separately. Prodpezz Ruxjfx Airjc

Condition: excellent (used), functionality: fully functional, Special offer! Podpfszzcf Nox Airjrc From the inventory of the city of Meschede, we can offer you this top-condition, complete "G 7882 CD" system from the world-renowned brand Miele. This unit is a fully automatic system for cleaning, disinfecting, and reprocessing medical devices and containers. The included basket features special holders for laboratory glassware and other containers – see images. The G 7882 has an internal, automatic dosing system for cleaning and additive agents, which are stored in a separate housing. The unit has never been used commercially and has seen very little use; the installed filters have only a few operating hours. All components are in perfect optical and technical condition; there are no significant damages – see images. Equipment: - Cleaning and disinfection unit - Washing basket - Data cable - Operating manual - Operating hours of the fine filter: 111 hours - Operating hours of the coarse filter: 27 hours Technical data: Weight (net): 120 kg Height with device cover: 85 cm Height without device cover: 82 cm Width: 90 cm Depth: 70 cm Depth with door open: 126.5 cm The sale is exclusively for commercial businesses; you will, of course, receive an invoice – but without VAT, as the item comes from a public entity. Private buyers have the option to purchase the unit "on behalf of a customer"; a direct commercial sale to private individuals will not take place. The goods are sold with the exclusion of any warranty or liability for defects. The exclusion does not apply to claims for damages resulting from gross negligence or intentional breach of the seller's obligations, as well as for any injury to life, body, and health. The total weight of the system, including accessories and pallet, is approximately 140 kg! The unit can be collected from our premises by appointment during regular opening hours. Insured shipping via a freight forwarder is possible for an additional charge. Delivery will be made within three business days after payment receipt via a freight forwarder – you also have the option to collect the unit from our premises during regular business hours by appointment. If you have any questions, please contact us directly using the contact details provided.

Condition: repair required (used), Year of construction: 2008, machine/vehicle number: 10719G, functionality: limited functionality, The HEUFT K0 400 has already been professionally dismantled by HEUFT. All operating and hazardous materials have been completely pumped out, and the system has been prepared accordingly for further handling. The cost for the professional dismantling alone amounted to approximately €2,500. Furthermore, the system was regularly maintained up until the dismantling. The burner included in the sale has been serviced and is in good condition. Model: WG40N/1-A ZM-LN. Serial No.: 583489708. Podpfxszz Inis Airerc The boiler itself has also been regularly maintained. The significant defect that we are aware of is the burnt-through boiler base. In addition, the control cabinet and boiler pump will not be included in the sale. The boiler is ready for immediate collection.

Condition: used, Year of construction: 1972, turning diameter over bed 1650 mm turning diameter over slide rest 1350 mm turning length 10000 mm turning speeds 1,4 - 280 U/min greates pass round over bed 1580 mm center height over square guideway 825 mm bed length 13.350 mm bed width 1.120 mm spindle diameter in front bearing 260 mm spindle bore 82 mm upper head travel 500mm tailstock quill diameter 200 mm max. workpiece weight between centres 10.000 kg weight of the machine ca. 25,5 t Power 45 KW The machine is a first-hand purchase, is free from defects and is in very good condition. In 2023, the headstock was overhauled; this included replacing the main spindle bearings, chrome plating and reworking the main spindle and bottom wheel (bearing seat). The guideways are also in very good condition, considering their age. Podpfxsy S Duvj Airjrc Accessories - Feed guard Equipment - 3-axis digital display - 1 x faceplate - 1 x roller stand - Chip conveyor (Kabel Schlepp 300/100)

Condition: used, functionality: fully functional, machine/vehicle number: H2X396J00939, Year of construction: 2018, operating hours: 14,083 h, load capacity: 8,000 kg, lifting height: 3,670 mm, fuel type: diesel, mast type: simplex, construction height: 3,180 mm, power: 84 kW (114.21 HP), fork carriage width: 2,180 mm, empty load weight: 13,845 kg, total length: 3,350 mm, drive type: Diesel, construction width: 2,180 mm, Diesel forklift Chassis number: H2X396J00939 Load center: 900 ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Standard Transmission: Linde Hydrostat Condition: Limited operability Technical condition: Normal Front tires type: Super elastic Front tires size: 8.25-15 Front tires condition: 0 - 20% Rear tires type: Super elastic Rear tires size: 300-15 Prjdpfoyvauxsx Airoc Rear tires condition: 0 - 20% Description: The unit is sold as-is. The mast shows some play. Common defects and signs of wear are present (hydraulic hoses, bearings, pins, etc.). We offer the forklift in functional condition, but without a UVV (accident prevention regulation) inspection. 3rd valve, half cabin, safety light, rotating beacon.

Condition: used, machine/vehicle number: 425130268, Year of construction: 2016, operating hours: 813 h, load capacity: 1,000 kg, fork length: 1,150 mm, empty load weight: 500 kg, No minimum price – guaranteed sale to the highest bidder! Auction of two Jungheinrich EPL 110 (manufactured in 2016 & 2015) The 2015 unit is defective and will be sold as a source of spare parts! TECHNICAL DETAILS Lifting capacity: 1,000 kg Fork length: 1,150 mm MACHINE DETAILS Battery voltage: 24 V Battery capacity: 85 Ah Dimensions & Weight Dimensions (L x W x H): 1,600 x 800 x 1,940 mm Self-weight: 500 kg Serial number, unit 1: 425130268 Operating hours, unit 1: 813 h UVV certificate, unit 1: 04/2026 EQUIPMENT Integrated battery charger Predpfjzwpctox Airjc The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. The information on the technical data comes from the original offer. No liability is assumed for typographical or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the auction ends.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1315/451, Completely overhauled: Mechanics, geometry, hydraulics, and electrical parts (checked and/or replaced) Wheelhead: Disassembled, parts cleaned, worn or defective components replaced, motor overhauled, bearings replaced, belts replaced, spindle disassembled, seals and O-rings replaced, adjustments made. Newly painted. Workhead: Disassembled, parts cleaned, worn or defective components replaced, motor overhauled, belts replaced. New spindle bearings. Newly painted. Tailstock: Disassembled, inspected, overhauled. Hydraulics: Disassembled, motor checked, hoses replaced, defective and worn parts replaced. Hydraulic block checked. X-axis: Disassembled, all worn parts such as O-rings, seals, segments, etc. replaced, hydraulic piston overhauled, table ground. Z-axis: Disassembled, table ground, worn or defective parts replaced, hydraulic piston overhauled, newly painted. Electrical cabinet: Completely checked, various relays replaced. Paintwork: Colors: White RAL 9003 and Grey RAL 7011 Geometry according to manufacturer's protocol. Various accessories checked and cleaned. Origin: CH Voltage: 380 / 50 / 3 Net weight: approx. 2,200 kg Customs tariff number: 8460.2920 TECHNICAL SPECIFICATIONS Prsdpfxsw U Ry No Airsc Nominal distance between centers: 600 mm Max. distance between centers (with extended headstock): 750 mm Center height, standard: 125 mm Center height with interchangeable pads for heads: 175–250 mm Max. workpiece diameter (125 mm center height): 250 mm Max. workpiece diameter with interchangeable pads: 350–500 mm Swiveling range of table in each direction: 10° Max. grinding length for flat surfaces (max. width = 200 mm): 900 mm Continuously variable hydraulic table speed: up to approx. 6 m/min Table reversal delay: 0–5 sec Grinding wheel for external grinding, diameter - width - bore: 400x50x127 mm Grinding wheel for flat surface grinding: 250x13x76 mm Wheelhead spindle speed: 1,500/1,700/2,200/3,600 rpm Wheelhead swiveling range: 270°, with indexing every 90° Vertical travel of wheelhead, center height: 125–350 mm Transverse travel of wheelhead: 285 mm Hydraulic rapid traverse stroke: 40 mm Intermittent infeed of wheel by table reversal: 0.001–0.03 mm/dia Continuous infeed for plunge grinding: 0–0.9 mm/dia Micrometric infeed stop, by division: 0.001 mm/dia Workhead swiveling range: 360° Workhead spindle speed, stepless: normal/special: 20–400 / 10–400 rpm Internal taper of workhead/tailstock: Morse 5/3 Wheelhead motor: approx. 4 HP All technical specifications are given without obligation and subject to errors or omissions.

Condition: like new (used), Year of construction: 2018, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 568746, overall weight: 1,068 kg, load capacity: 210 kg, arm reach: 2,700 mm, controller manufacturer: KUKA, controller model: KRC4, teach pendant manufacturer: KUKA, input voltage: 400 V, type of input current: AC, Details about the robot: Year of manufacture: 2018 Operating hours: Only 0.6 hours Condition: As new, flawless Model: Kuka KR 210-2700 Extra Inspection & Test: The robot can be inspected and tested on site at any time. This robot is ideal for applications demanding the highest precision and reliability. It has been carefully stored and is in impeccable technical condition. Predpfx Aowtx Imjirsc Note: Sale as a used consumable machine with exclusion of any liability for material defects.

Condition: used, Year of construction: 2021, functionality: fully functional, year of last overhaul: 2025, Equipment: documentation/manual, For sale is a complete, industrially-used filling, capping, labeling, and banding line for the automated processing of cylindrical cans, including compressed air supply. The line components are technically synchronized, were in use in real production, and are suitable for immediate production startup. Application Range: - Cylindrical PET cans, reference format 75 ml – 400 ml. - Suitable for tobacco, shisha tobacco, food products, cosmetics, and other non-food products. - Multi-format capable (format-dependent adjustments possible) Predpfsx Hzzpjx Airsc Line Configuration / Main Components: Feeding: - 2× format-adjustable rotary tables - Rotary table 1 for feeding empty cans - Rotary table 2 for feeding lids Dosing & Filling: - REX vacuum filler RVF 327, year 2017 - Precise product dosing - Fillpack filling and capping machine R01-TI, year 2022 - Filling cans - Placement of sealing foil - Sealing foil welded on for tamper-evidence - Placing and screwing on lids Labeling: - CDA NINON labeling machine, year 2021 - Lid labeling - Wrap-around/side labeling - Transfer via conveyor belt Checkweigher: - Garvens S2 conveyor checkweigher, year 2002 - Inline weight control - Automatic rejection of out-of-spec products Banding / Tax Stamp: - ECOMA can banderoler, year 2022 - Application of tax or security bands - CE compliant - Output up to approx. 35 cans/min (format-dependent) Compressed Air Supply (included): - COMPRAG screw compressor ARD-1510, year 2022 - 15 kW, max. 10 bar, 1.9 m³/min - COMPRAG air receiver RH-500, 500 L - Including refrigerant dryer - System acquired new in 2022, optimally matched to the line Auxiliary Unit: - Tumbler / mixer - Vacuum function defective - Mechanical mixing function operative - Offered as an auxiliary unit without warranty Technical Summary: - Degree of automation: high / fully-automatic - Tamper-evident seal: welded sealing foil - Quality assurance: inline checkweigher - CE marking: available - Manufacturing years overall: 2002–2022 Condition: - Used, functional, from ongoing production Scope of Delivery: - Complete production line as described - Conveyor systems between modules - Format parts for 75 ml cans - Controls and switch cabinets - Compressed air system Inspection: Inspection by appointment expressly possible.

Condition: ready for operation (used), Year of manufacture: 2009 No power take-off (PTO) Air conditioning Front linkage, tipping body at the front and rear, hydraulics, all-wheel drive, hydrostatic drive, ready for use. Prjdpfx Aiewvf Avjrsc Optical defects, see pictures. Preferably sold to dealers or for export. Errors and omissions excepted. Pictures/description may vary.

Condition: used, functionality: fully functional, machine/vehicle number: 906xxxxx, Year of construction: 2020, operating hours: 1,336 h, load capacity: 1,600 kg, lifting height: 4,590 mm, free lift: 1,498 mm, fuel type: electric, mast type: triplex, construction height: 2,030 mm, fork length: 1,150 mm, empty load weight: 1,237 kg, total length: 2,020 mm, drive type: Elektro, construction width: 800 mm, High-lift pallet truck Podpoxfm Dqefx Airjrc Chassis number: 906xxxxx Load centre: 600 mm Mast type: Triplex Transmission: AC pulse control Condition: Refurbished without warranty Technical condition: Very good Front tyre type: Polyurethane Front tyre size: Load rollers, polyurethane, single Rear tyre type: Polyurethane Rear tyre size: Drive wheel, polyurethane Battery voltage: 24V Battery capacity: 375Ah Battery manufacturer: Jungheinrich Battery type: PzS Description: Fully refurbished by the manufacturer, UVV safety inspection passed, sold without warranty/liability for material defects. Pulse control, full free lift, sensitive lifting and lowering on both sides, discharge monitor, hour meter, creep speed button, battery (overhauled by the manufacturer 06/2025) with Aquamatik system, external charger included, unit refurbished by the manufacturer.

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: THE MACHINE WILL BE BRAND NEW The compression chamber walls are covered with HARDOX material for long-term life-cycle and friction resistance. A hydraulic Oil Cooling system is implemented for efficiency in hot climate conditions. Cylinder Rods are induction-hardened and chrome-plated. Pumps and valves of hydraulic systems are from worldwide reputable brands such as PARKER, and BOSCH-REXROTH. The machine is fully automatic by PLC control. It is easy to use with the help of the touch screen. All electrical and electronic parts are by SCHNEIDER and SIEMENS Brands. The machine is CE-certified. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. Machine will be under Aymas Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours. SEE THE TECHNICAL DESCRIPTION BELOW Prsdpedfcqajfx Airsc Bale Size 400mm x 400mm x... Bale Weight 120-180 kg (Steel), 50-80 kg (Aluminium),150-200 kg (Copper) Press Box Dimensions (Width x Length x Height): 1.000mm x 2.700mm x 900mm Loading Bunker Dimensions (Width x Length x Height): 1.650mm x 2.300mm x 800mm Feeding Opening: 1.000mm x 1.600mm Capacity*

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW: 1. Briquette Diameter: Ø 120mm 2. Capacity: 1.800 – 2.200 kg/hour (Iron & Steel) 3. Preliminary Compression Ram Thrust: 15 tons 4. Main Compression Cylinder Thrust: 400 tons 5. Maximum Working Pressure: 300 bars 6. Cycle Time: 12 - 14 sec 7. Electric Motor Power: 75 kW Pedpjdfc Ikofx Airjrc 8. Machine Dimensions (Width x Length x Height): 3.200mm x 4.200mm x 3.500mm 9. Machine Weight: 13.000 kg 10. Screw drive feeders will fill the compression chamber automatically and a built-in vibrating hopper will provide safety to the chamber by preventing oversize material from entering the chamber. 11. Cylinder Rods are induction-hardened and chrome plated. 12. A Hydraulic Oil cooling system is implemented. 13. Pumps and valves of hydraulic systems are PARKER or BOSCH-REXROTH brand. 14. The machine is fully automatic by PLC control. 15. All electrical and electronic parts are by SCHNEIDER or SIEMENS Brand. 16. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. 17. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours.

Condition: new, Year of construction: 2024, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW * Piston shafts will be induction-hardened and chrome-plated. * The pressing box will be HARDOX plates. * Pumps and valves used in the hydraulic system will be MARZOCCI brand. * The hydraulic valve control lever unit will be SALAMI or VALVOIL brand. * There will be automatic Oil Cooling/Heating Systems. * There will be an oil temperature control screen on the electric panel and an oil level control on the hydraulic oil tank. * The machine will be manually operated. * All electric-electronic material will be from the SCHNEIDER or SIEMENS brand. * Machine will be under AYMAS Makina San. ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or 2.500 working hours whichever comes first. * The machine is CE and EAC certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. SEE THE TECHNICAL DESCRIPTION BELOW Bale Size: 600mm x 400mm x ... Pjdpfx Aisdfc Unersrc Container Dimension (Width x Length x Height ): 620mm x 1.300mm x 620mm Capacity:

Condition: used, Year of construction: 2021, Overview  The bottle unscrambler was manufactured in 2021 by the German company ALWID. It is part of a new filling line and can fill chemical products into plastic containers. The machine has ATEX certification, which allows it to handle explosive products. The machine can be purchased with warranty.  Technical data  Capacity  12.000 bph at 50 ml HDPE, oval 43 x 23 x 95 mm  14.000 bph at 250 ml HDPE, Ø60 mm x 126 mm Incl. 2 format sets for processing the above mentioned bottle sizes. Bottle sizes Fully enclosed cabin, machine frame and wall panels in stainless steel Floor frame in mild steel, painted (similar to RAL 9006 silver gray) Quick access due to large doors as well as quickly removable panels Rejection of defective bottles  Easy format changeover due to quick-change system without tools Siemens S7 control system  Bottle loading system with hopper 1000 l, in stainless steel, chassis and supports in mild steel, painted Positronic control system for optimum adaptation to downstream filler Prjdpemk I Dwefx Airjc

Condition: good (used), The scope of delivery includes: 261x stacking transport box, used Manufacturer: SSI Schäfer type: 14/6-4 design: recessed grip on both sides color: blue material: polypropylene Outer dimensions LxWxH: 210x150x123mm inner dimensions LxW: 190x123mm Useful height in stack: 110 mm Capacity: 2,50 Liter Stackable: yes Weight | Piece: 0,266 kg Weight / pallet: approx. 95,00 kg Prodpfxspl Tcbe Airsc Remark: These are used stacking transport boxes. There may be scratches, soiling and color color defects may be present. Application: The stacking transport boxes are suitable for storing tools, screw materials and other small parts. small parts. General information about the article: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Year of construction: 2016, condition: defective spare-parts repository (used), machine/vehicle number: 00050, Precision Temperature Control Unit (TCU) - BOFA THE DISPLAY CONTROLLER IS DEFECTIVE! Year of manufacture: November 2016, serial number 00050, excellent condition, the filter is in good shape, electric documentation of the TCU is present, refrigerant gas: R134a 0.75Kg in the system Precision temperature control unit designed for solder paste applications Reverse flow air technology enhances filter performance and increases life Prsdpfx Aehgr Ihoirsc Process monitoring via temperature sensors that can be strategically mounted within the printer Precision temperature control unit designed for solder paste applications. The Temperature control unit (TCU) has been designed to meet a very specific process requirement within the electronics sector. The reliable placement of surface mount devices during PCB assembly requires that during the initial printing stage the solder paste is maintained at a temperature that ensures optimum performance. With assembly now on a global basis, the variation of local climate and factory conditions means that this optimum level cannot be maintained without some form of intervention. The design of the TCU includes cooling and heating elements which ensure that the temperature within the printing environment is maintained within 1ºC of the optimum paste performance temperature regardless of whether the factory ambient is above or below this level. Reverse flow air (RFA) technology The RFA technology feature causes a fall in velocity and air direction change. Larger particulate falls out of the airstream into the filter’s drop-out chamber. With less particulate entering the filter media the filter life is significantly increased, enhancing filter capture performance and ensuring longer life. Technical specifications 1. Chiller module 2. Condensate collection container 3. Air outlet 4. Air inlet 5. Castors 6. Service door lock 7. Fail style condensate sensor 8. Four colour beacon mounting plate Technical data: Air delivery system: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 1°C Cooling capacity: 2000W Temperature sensor: Shared output from integrated printer sensor (0 – 10V input over 0 –50°C) Air in filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant gas: R134a 0.75Kg Full load current: 12.6A Start up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Noise Level: higher then 75dBA* Dimensions: 1285mm (H) + (beacon 450mm), 540mm (W), 670mm (D) Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 140Kg Documentation include: Electrical Schematic Sales price: 1.500 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW 1. Briquette Diameter: Ø 160mm 2. Capacity: 4.500 – 5.500 kg/hour (Iron & Steel) 3. Preliminary Compression Ram Thrust: 50 tons 4. Main Compression Cylinder Thrust: 600 tons Predpfegv I Ihex Airec 5. Maximum Working Pressure: 300 bars 6. Cycle Time: 12 - 14 sec 7. Electric Motor Power: 170 kW Overall 8. Machine Dimensions (Width x Length x Height): 5.200mm x 8.000mm x 3.100mm 9. Machine Weight: 42.000 kg 10. Screw drive feeders will fill the compression chamber automatically and a built-in vibrating hopper will provide safety to the chamber by preventing the oversize material from entering the chamber. 11. Cylinder Rods are induction-hardened and chrome plated. 12. A Hydraulic Oil cooling system is implemented. 13. Pumps and valves of hydraulic systems are PARKER or BOSCH-REXROTH brand. 14. The machine is fully automatic by PLC control. 15. All electrical and electronic parts are by SCHNEIDER or SIEMENS Brand. 16. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. 17. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours.

Year of construction: 2025, condition: new, functionality: fully functional, The powerful Y-series fiber lasers are ideal for industrial product marking. They are used for precise and economical direct part marking (DPM) of products and components in almost all metal and plastic processing industries: from automotive engineering to medical and security technology to electronics. All types of codes (QR codes, DMC / DataMatrix codes, barcodes), alphanumeric characters, logos and lettering are marked reliably and with high precision using the fiber lasers. The camera system, which can optionally be integrated into the marking head, ensures zero-defect quality and process reliability through automatic optical validation and verification steps. Thanks to its modular design, this fiber laser series offers maximum flexibility and enables uncomplicated adaptation to product-specific marking requirements as well as simple integration into production lines and FOBA workstations: Nine fiber lasers of different power classes and pulse widths are combined in a modular platform. Marking field calibration and parameter sets for optimizing marking quality, accuracy and speed enable optimum configuration for the respective application. Prodpst E I Epsfx Airoc Main application areas Medical technology, automotive engineering, automotive supply industry, integrators, plastics and metalworking industries, machine and tool construction, electronics industry, security technology, ID and personalization sector (card, badge and passport personalization), marking at standstill or in motion