Used Desk Plates for sale (10,827)

Condition: good (used), NC plate boring mill with point-to-point and linear HEIDENHAIN TNC 124 control Year of manufacture: 1975 / retrofitted with CNC control in 1997 Spindle diameter: 130 mm Nsdpfxjyxp Dps Akfowf Spindle taper: ISO 50 T-slot clamping surface: 6000 x 3000 mm Travel distances: X-axis, table (cross): 6000 mm Y-axis, spindle head (vertical): 3000 mm W-axis, quill travel: 1100 mm Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, used, robust marking-out and spotting plate Nodpfx Akoy Ahwpjfjwf Table surface: 750 x 1000 mm Working height: 800 mm

Condition: good (used), Year of construction: 1963, cutting length 2500 mm plate thickness 3 mm distance between columns 2050 mm blade length 2650 mm total power requirement 3 kW weight of the machine ca. 2,5 t - The scissors are equipped with an adjustable stop on the back. stop. Each Nsdpfeul Eixox Akfowf side is equipped with a millimetre counter, so that the guarantee that the cuts are true to size. - Spring-loaded automatic hold-downs prevent the material from shifting during the cutting process. material during the cutting process.

Condition: good (used), sheet width 2000 mm plate thickness 2,25 mm Nwjdpfeul Ei Esx Akfsf distance between columns 2040 mm total power requirement 7,5 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 2,2x1,7x1,1 m SN-No. 380/6

Year of construction: 2026, condition: new, NEW - - Ideal for removing plates from your standing plate storage. - For in-plant transport of the plates to the standing or lying Nwedpfx Aod Tyaajkfjf panel dividing saw. - The steplessly height-adjustable support surface can be exactly to the height of your panel saw. height of your panel saw. - Panels weighing up to max. 250 kg can be transported or transported or swiveled by one operator alone. Technical data: Support height - standing: approx. 120 - 340 mm - lying: approx. 890 - 1200 mm max. plate size: 5200 × 2100 mm load capacity: 250 kg Location: ex stock 54634 Bitburg - immediately available- Will be shipped for 90,- Euro net within Germany

Condition: like new (used), Year of construction: 2013, cutting length 1060 mm cutting angle 2 ° no. of strokes 50 Hub/min engine output 4,0 kW weight of the machine ca. 0,67 t Motorised guillotine shears type 165.03 Technical data: Working width (cutting length): 1060 mm Nedpfx Aksua Iulefowf Max. sheet thickness to be cut: 2.5 mm at 400 N/mm² Machine stroke rate approx.: 50/min Cutting angle: 2° Opening width hold-down device: 5 mm Factory setting cutting gap 0.1 mm - Digital display for backgauge - Front table support - Operating instructions available

Condition: good (used), Year of construction: 1987, functionality: fully functional, total width: 1,500 mm, total length: 1,000 mm, overall weight: 855 kg, WAG 894- Offered here is a Novalith hard stone surface plate. Surface plate dimensions: 1500 mm x 1000 mm x 190 mm. Year of manufacture: 1987. Weight: approx. 855 kg. Flatness (specified): 20 μm. Flatness (actual): 50 μm. Nwsdpfxsy Auuhe Akfsf

Condition: good (used), Plastic sheets, plastic laminate, spring plates, leveling plates Nwodegrvdqopfx Akfjf -Manufacturer: Lista, plastic spring plates, 210 pieces -Plate: 280 x 60 x 8 mm, 40 pieces -Plate: 40 x 60 x 1 mm 170 pieces -Sale: only complete set -Total weight: 11 kg

Condition: good (used), 1x electromagnet with coolant connection, 500 x 200 x height 125 mm, and 1x electromagnet without coolant connection. Items are sold individually. Nedpfxey Agm Ae Akfjwf

Condition: used, functionality: fully functional, Year of construction: 2008, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 1,100 mm, side roll diameter: 980 mm, roller diameter: 1,430 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 4,160 mm, sheet thickness (max.): 200 mm, sheet thickness steel (max.): 200 mm, overall weight: 2,25,000 kg, total length: 9,000 mm, total width: 5,580 mm, total height: 6,100 mm, power: 220 kW (299.12 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, Hydraulic Plate Bending machine planetary pinch pyramid with prebend. model MG3200 3 roll capacity 3100x200 mm year of make 2008 Capacity : Plate width mm. 3000 Rolling thickness mm. 200 Pre-bend thickness mm. 160 -3 rolls driven hydraulic motorized with axial gear unit on each roll independent -Planetary design with pre-pinch fully hydraulic Rolls surface length mm. 3100 Top roll mm. 1100 Side rolls mm. 980 Electric power on hydraulic unit Hp 220 + Hp 180 Voltage 400 Vac / 50 Hz Configuration & accessories installed with the machine -Hardened surface of the 3 rolls -Conical plate bending attachment , rolls tilt with contrast roller type. Nwjdpfjyvgausx Akfsf -Centralized operator panel with directional joysticks electric. -Digital position readout of the bending rolls. -Oil cooler automatic unit heat exchanger. -Emergency and safety installations, certified CE -User manuals and instruction books in English -Dimension 9000 x 5580 x H 6100 mm -Weight approx. 225 Ton.

Condition: good (used), functionality: fully functional, Year of construction: 2005, machine/vehicle number: MC0 35100, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, roller diameter: 1,000 mm, sheet thickness (max.): 130 mm, sheet thickness steel (max.): 130 mm, total length: 3,500 mm, power: 240 kW (326.31 HP), Technical details Max. bending width: 3,500 mm Max. sheet thickness: 200 mm Total power requirement: 160 kW Smallest roll-in diameter: 770 mm Maximum cylinder pressure: 2 x 2 t Top roll Ø1000 mm Bottom rolls Ø900 mm Nwsdpeyn Agbsfx Akfjf

Year of construction: 2000, condition: used, machine/vehicle number: 1681/04, Panel Vertical Buffer Stacking Robot The system consists of a vertical buffer (vertical storage location/rack for sandwich panels) and a storage and retrieval unit (transport robot). Vertical buffer structure: 3x27 storage compartments with a pitch of approx. 75 mm Length: 6,000 mm Width: 2,200 mm Height: 2,800 mm Nsdoyzt Hmepfx Akfswf Transport robot (storage and retrieval unit) structure: 2 x 90° pivoting roller conveyors Chassis for longitudinal travel approx. 9,000 mm Including 4 individually controllable clamping grippers for pushing out the sandwich panels Including roller conveyor with 90° pivoting function for positioning wall elements

Condition: good (used), Year of construction: 2018, Desk, work table, assembly bench, assembly table, workbench, multi-purpose table -Manufacturer: Ceha, Multi-purpose table type PM-120-60 -Width: 1200 mm -Depth: 600 mm -Height: 720-750 mm -Load capacity: 100 kg -Table: easily disassembled / storable -Number: 11 tables available -Price: per piece -Transport dimensions: 1200/600/H72 mm Nedpfx Akeywuvzjfjwf -Weight: 16 kg/pc.

Condition: good (used), Desk, height adjustable desk -Manufacturer: Palmberg, height-adjustable desk -Tool-free: height adjustable by means of removable adjusting elements -Width: 2000mm -Depth: 800 mm -Height: 680-760mm -Number: 6x desk available -Price per piece -Dimensions: W/D/H 2000/800/H720 mm -Weight: 43 kg/piece Nodpettim Hofx Akfewf

Condition: used, Year of construction: 1980, sheet width 2540 mm plate thickness 2 mm thickness at "Niro-steel" 1,25 mm no. of strokes 63 Hub/min cutting angle 1,13 ° table height 750 mm table width 320 mm back stop - adjustable 5,0-550 mm total power requirement 3 kW weight of the machine ca. 1600 kg Equipment: - manual backgauge, with analog display * Adjustable from the front * stepless adjustment over the entire travel range Nodpfxjyv N I Ao Akfswf - 1x long side stop - 3x support arms - Free-moving foot switch - Sheet holding device for thin sheet blanks

Condition: used, Year of construction: 1977, sheet width 3050 mm plate thickness 6 mm weight 7.000 kg range L-W-H 3450x2200x1750 mm Equipment/accessories: - adjustable support table - Sheet support - angle stop Nedpfx Aksyv Nzcsfewf - Sheet support arms - foot switch

Condition: used, Year of construction: 1990, sheet width 2500 mm plate thickness 4 mm cutting angle 1,49 ° 40-80 column arm 200 mm Number of hold downs 13 Stück back stop - adjustable 5-1000 mm table height 750 mm oil volume 85 l air pressure - required 5 bar range L-W-H 3100x1900x1500 mm Njdpfx Akjyv Nx Iefswf weight of the machine ca. 3.600 kg Accessories: -Control RAS Multicut 2000 -Sheet metal holding device -Foot switch -Angle stop -Sheet metal support arms -Side protective grilles

Condition: new, sheet width 1350 mm 3 mm sheet thickness for stainless steel 1,5 mm Njdpfx Aeyv Nt Sjkfewf rear stop 600 mm total power requirement 3 kW weight of the machine ca. 1150 kg dimensions 2030 x 1940 x 1220 mm Standard equipment: - All-steel welded construction with static and dynamic frame rigidity frame rigidity - Direct drive with brake motor - Specially alloyed cutting blades - 750 mm motorized, digitally adjusted backgauge with ball screws recirculating ball screws - Manual blade gap adjustment system - Mechanical sheet clamping system with plastic base - Work table with insert plates - foot switch for single and repeat cutting cycles - 1 x squaring arm 1000 mm long with metric scale - 2 x 800 mm front material support arms - Front stop - Finger protection - front and rear covers - Rear light guards - CE declaration of conformity

Condition: used, Year of construction: 1986, sheet width 2540 mm plate thickness 2 mm thickness at "Niro-steel" 1,25 mm no. of strokes 63 Hub/min cutting angle 1,13 ° table height 750 mm table width 320 mm back stop - adjustable 5,0-550 mm total power requirement 3 kW weight of the machine ca. 1300 kg Equipment: - manual backgauge, with analog display * Adjustable from the front * stepless adjustment over the entire travel range - 1x long side stop - 3x support arms - Free-moving foot switch Nsdpfjyv Nn Ajx Akfowf - Sheet holding device for thin sheet blanks

Year of construction: 1991, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1991 Specifications Metric US Standard Rolling width 3000 mm Rolling thickness 3x toproll Ø 120 mm Rolling thickness 5x toproll Ø 150 mm Rolling thickness prebending 100 mm Top Roll Ø 910 + 820 + 740 mm Bottom Roll Ø 940 mm Side roll Ø 780 mm Number of rolls 4 Rolling speed 2 + 4 Adjustiment lower roll 200 mm/min. Adjustment side rolls 500 mm/min. Number of driven rolls 2 Power 300 kW Dimensions (Estimate) Length 8000 mm Width 5400 mm Height 5400 mm Weight 290000 kg Nedpfx Askwcc Nekfjwf Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Share on

Year of construction: 1980, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1980 Specifications Metric US Standard Rolling width 3000 mm Rolling thickness 3x toproll Ø 130 mm Rolling thickness 5x toproll Ø 140 mm Rolling thickness prebending 120 mm Top Roll Ø 950 mm Bottom Roll Ø 850 mm Side roll Ø 180 mm Number of rolls 4 Rolling speed Nodpfxokvm Szs Akfewf 2 + 4 Adjustiment lower roll 0 - 400 mm/min. Adjustment side rolls 0 - 400 mm/min. Number of driven rolls 2 Power 132 + 37 kW Dimensions (Estimate) Length 12000 mm Width 5440 mm Height 5650 mm Weight 286000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1978, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1978 Specifications Metric US Standard Nedpfx Aekvm S Nskfjwf Rolling width 3050 mm Rolling thickness 3x toproll Ø 60 mm Rolling thickness 5x toproll Ø 70 mm Rolling thickness prebending 50 mm Top Roll Ø 630 mm Bottom Roll Ø 600 mm Side roll Ø 500 mm Number of rolls 4 Rolling speed 0 - 5 Adjustiment lower roll 200 mm/min. Adjustment side rolls 200 mm/min. Number of driven rolls 2 Power 120 kW Dimensions (Estimate) Length 5790 mm Width 4200 mm Height 4200 mm Weight 85000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 380 mm, roller (top) diameter: 430 mm, side roll diameter: 300 mm, roller diameter: 480 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 1,420 mm, sheet thickness (max.): 35 mm, sheet thickness steel (max.): 35 mm, overall weight: 20,000 kg, total length: 5,500 mm, total width: 2,000 mm, total height: 2,100 mm, power: 20 kW (27.19 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 3, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, model capacity 3000x35 mm Digital readout Hydraulic 4 roll plate bending machine, used year 2017 plate thickness rolling 35 mm pre-bend 30 mm minimum rolling diameter ID 480 mm plate max width on the rollers 3100 mm top roll size 430 mm Power on hydraulic unit 20kW Vac 400/50 -480/60 Installed configuration Hardened rolls high surface strength Conical plate rolling, cone bending Electric console remoted Digital position readout Hydraulic rotation central rolls driven parallelism lifetime with torsion bar Pre-pinch load adjustable for pre-bending Drop-end top roll front open for unloading Re-rolling system for welded shells calibration. Safety and emergency stop Manuals and schematics – CE declaration of quality machine dimension 5500x2000x2100 mm weight 20ton --- Additional accessories installed with the machine Nwedpfx Asyu Nr Dekfsf See layout drawing in enclosed nr.1 central support hydraulic 4 ton capacity to support large shell dia up to 4,5 meters id nr.1 side support hydraulic left side 4 ton doble arm nr. 1 side support hydraulic right side 4 ton double arm

Condition: new, Year of construction: 2026, 3050 mm 13,0 mm 0,5-2,5 ° 1000 mm Nwsdpfx Aowp Tduskfef work height max. 900 mm

Condition: good (used), Panel size: 1500 x 4000 mm panel height: 370 mm Thickness of the top plate: 50 mm Working height when assembled: 870 mm Weight: 6,8 t Nsdpfjdzln Uox Akfswf