Used Die Bending Machine for sale (98,741)

Condition: ready for operation (used), Year of construction: 2001, Max.Tube Ø: 42mm Min. Tube Ø: 6mm Max. Wall thickness:2,5 mm Max. Bending radius:270mm Min. Bending radius:25mm Max. bending length:3.000mm 3e Dimension bending:360,000 mm/min. Power: 5.5kW Length: 4.700 mm Itjdpfx Ajt R T Itsabjn Iajbmet R T Itja U Db Isu Width: 1.300 mm Height: 1.600 mm Weight: 3.750 kg

Condition: used, Year of construction: 1981, Technical details: work height max.: 1100 mm voltage: 380 / 50 V total power requirement: ca. 15,1 kW Ijdewh Rq Nopfx Aabstn weight of the machine ca.: 4,5 t dimensions electric cabinet LxWxH: 1,2 x 0,64 x 1,4 m dimension machine xH: 1,5 x 1,6 x 1,3 m The profile round bending machine can be used for bending thick-walled steel profiles, steel beams and steel rails. The machine works on two gears: 0-4 rpm and 0-6,5 rpm. - 1x driven bending roller can be adjusted vertically by 140mm and - 2x drive rollers with centre distance 360mm - Right and left rotation of the rollers possible Equipment: - Hydraulic power unit, manufacturer TOS - control panel accessories: - various bending rollers without profile *

Condition: new, Year of construction: 2025, - Capacity 1070 x 5 - Electrically adjustable rear roller - Digital display for the movement of the rear roller - Hardened rollers - Conical rolling - Rotating top roller - Brake motor - Foot control - Emergency stop - documentation Itjdsirwlaspfx Aaben - 400V

Condition: good (used), functionality: fully functional, Type: gosmeta 3-roll plate bending machine Maximum rolling length: 2100 mm Estimated rolling thickness (S235) over the entire length: between 8 and 10 mm Exact value not known, as the nameplate is unreadable Top roll diameter: 190 mm Lower roll diameter: 170 mm Itjdoxmvhzjpfx Aabjn Rolling speed: 5.3 m/min Lower rolls: powered Drive: electric Side: fold-away for removing edge-bent products Shafts for profile rolls: 3 × Ø 90 mm Foldable side for removing closed cylinders. Equipped with emergency stop wire around the machine. Profile rolls or special segment rolls can be mounted on the 3 × Ø 90 mm shafts. Machine dimensions: length 360 cm x width 120 cm x height 140 cm Weight approx. 2800 kg

Year of construction: 2000, condition: ready for operation (used), General Data Measurements width 1900 mm Measurements depth 2350 mm Measurements height 1680 mm Machine weight 2500 kg Main Drive Number of axis 3 Movement X-Axis Movement 350 mm Y-Axis Movement 250 mm Z-Axis Movement 300 mm Workpiece Workpiece weight 500 kg Table Iedpexcztnofx Aabjtn Number of tslots 3 This 3-axis CHARMILLES Roboform 35 die-sinking EDM machine was manufactured in 2000. It features a stabilized cast iron machine bed, a C-axis with 360° rotation, and a maximum electrode weight of 50 kg. The machine offers X, Y, Z travel paths of 350 mm, 250 mm, and 300 mm respectively. Ideal for precision mold making with its robust construction and reliable performance. Contact us for more information about this machine. Application Types EDM

Condition: new, functionality: fully functional, Year of construction: 2025, overall weight: 10,000 kg, input voltage: 380 V, input frequency: 50 Hz, feed length X-axis: 120 mm, feed length Y-axis: 200 mm, feed length Z-axis: 170 mm, GB-A1500 Iodev Ikvgopfx Aabjtn Fully automatic high-speed bending center Bending length (mm): 1500 Bending height (mm): 4side160 4side170/2side350 4side350 Minimum molding size: (Fold 4 sides) (mm) 4 sides 160: 350*250 4 sides 170/2 sides 350: 350*250 4 sides 350: 350*250 Maximum bending size (mm) 1500*1500 X-axis travel: 120 Y axis travel: 4 sides 160: 200 4 sides 170/2 sides 350 305 4 sides 350: 305 Z-axis travel: 4 sides 160: 170 4 sides 170/2 sides 350: 357 4 sides 350: 357 Pressing knife height: 4 sides 160: 177 4 sides 170/2 sides 350: 177 4 sides 350: 357 Number of axes: suction cup: 11 Pressure arm: 14 Machine power (KW) suction cup: 34.7 Pressure arm: 36.35 Maximum bending thickness of aluminum plate (mm): 3 Maximum bending thickness of iron plate (mm): 2 Maximum bending thickness of stainless steel (mm): 1.5 Maximum bending speed (s/knife) : 0.2 Overall dimensions (mm) long (front) 4 sides 160: 1890 2-4 sides 350 suction cups: 1890 2-4 sides 350 pressure arm: 1890 Width (side) 4 sides 160： 3300 2-4 sides 350 suction cups：3536 2-4 sides 350 pressure arm: 4127 4 sides 160: 2666 2-4 sides 350 suction cups: 2946 2-4 sides 350 pressure arm: 2946 Weight (approx. kg) 4 sides: 160 2-4 sides 350 suction cups: 10000 2-4 sides 350 pressure arm: 10000 1) Machine frame is heaviest welded con struction,stess released by annealing process,this has minimized deflection of the frame. 2) Y Axis full closed loop control 3) Proportional hydraulic compensation system to prevent deformation 4) German HEIDENHAIN linear encoder 5) Taiwan HIWIN ball screw and linear guide rail ,high performance AC Japanese Yaskawa AC servo motors and drives 6) Rich functions CYBELEC/DELEM professional control system 7) Electro-hydraulic servo synchronization module and Greman BOSCH pressure module 8) +/-0.01mm repeat accuracies 9) +/-0.01mm parallelism accuracies

Year of construction: 2000, condition: used, Punching machine Noble HM 35/350 Iedpfjg Dgyxox Aabstn BKE 200/5 Maximum pressure 35 T 5 mm sheet thickness at 40 kp/mm²

Condition: excellent (used), For sale is a system with 2 OPS Ingersoll Gentry Eagle 500 machines and an Erowa automation for tool and workpiece change. The system is in very good condition and fully functional. Both machines are loaded via the Erowa automation, one machine has its own tool changer. Technical data sheets available for download below in the advertisement Technical data for the EDM machines: Isdpfoq Su Hnex Aabotn Container dimensions: WxDxH: 770 x 670 x 440 mm Dielectric height: max 395 mm max top load: 100 kg min. Distance: 135 mm max. distance: 585 mm speed: 1-20 1/min Measuring resolution: 0.001 ° Work table (W x D): 750 x 650 mm load capacity: 1000 kg travel X/Y/Z: 525x400x450 mm Filter system: Cartridge filter: Filter area: 16 m² Total volume: 400 l Dimensions (WxHxD): 1356x2653x2284 mm Weight: approx. 4400 kg Technical data Erowa Automation: X-axis: 1200 mm Z-axis: 1050 mm C-axis: 350 ° A-axis: +/-180 ° B-axis: +/- 90 ° Y-axis: 1.1-18.74 m (METER!) Transfer weight: max. 130 kg The system is also equipped with 2 magazines Dismantling, loading and shipping can be organized throughout Europe for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: refurbished (used), functionality: fully functional, Year of construction: 2006, control type: PLC-controlled, degree of automation: semi-automatic, pipe diameter (max.): 60 mm, mandrel length: 6,000 mm, year of last overhaul: 2025, Equipment: CE marking, emergency stop, Mandrel Bending Machine S6006 ----- For producing dimensionally accurate tube geometries with bending radii of up to 1.5xD → Maximum bending capacity tube 60.3 x 4 mm (400 N/mm²) → Maximum bending capacity tube 60.3 x 2.6 mm (stainless steel) → Total connected load 5 kW → Tube feed length 6 m Robust and durable steel construction with a force-locked design—no torsion-prone structure such as a separated construction of the bending head and mandrel carrier. Maintenance-free electromechanical drive for the bending axis. The control system's touch display enables easy and intuitive programming and operation of the machine. After the tube is loaded, it is fixed by a chuck on the carriage. This ensures precise positioning of the tube, allowing the creation of dimensionally accurate geometries. Standard equipment also includes geometry verification before the bending process: If the bending process is started from the wrong position, the machine will not allow it. This prevents incorrect operation. Optional additional features offer more convenience and increase output and thus the efficiency of the system. Data transfer from the optional TBS-3D tube calculation software (PC version) is done via USB stick or via FTP access from the computer to the machine control. USB or LAN connector (RJ45) are standard. Existing tube geometries can be easily and quickly converted, e.g., via the STEP format. Standard equipment: → Electromechanical drive for bending axis 2.2 kW → Rotation speed 2.9 rpm (=17°/s) → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending shaft diameter 50 mm → Electronic length measurement ±0.1 mm → Electronic torsion measurement ±0.1° → Manual stop system (length overtravel stops) → Manual indexing system (15° increments for torsion) → Three-jaw chuck to clamp the tube in the carriage → External control panel PLC Control: → 10.1" touchscreen → ETH 10/100, X2X Link, USB → Foot switch operation → Data transmission via (W)LAN or USB → Material database Unique graphical programming: Simple geometries can be calculated directly at the machine. The control system calculates the feed and bending angle directly after entering length and angle values. Hydraulics: → Hydraulic power 3 kW → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction Options (available as additional equipment): → Variable bending speed via frequency inverter or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + torsion) → Mobile version (with castors) → Radius extension Iedpfx Aow Sr Uceabetn Sample image shows a similar machine

Condition: new, Year of construction: 2025, HEAD BENDING MACHINE Model; MAGRAF KV-10 Isdpfx Asdif Izjabstn

Condition: used, functionality: fully functional, Bariola press brake 3050 x 100 ton CNC ESA Iedpfsxlr Uhjx Aabetn Model PBI 100/30NCS Distance between uprights: 2600 mm Stroke: 150 mm Weight: 7000 kg With compensation table Used machine Internal code: SVR 360

Condition: good (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: AR200, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: MG, controller model: EVO, number of rollers: 3, shaft diameter: 200 mm, rotational speed (min.): 5 rpm, rotational speed (max.): 5 rpm, power: 29.42 kW (40.00 HP), input voltage: 400 V, type of input current: three-phase, operating pressure: 240 bar, Equipment: CE marking, documentation/manual, emergency stop, hardened rollers, Profile bending machine model AR200 brand MG srl year 2016 Machine in perfect condition, very little use Capacity chart of the machine in enclosed. Model AR200 Iodpfx Asxb Ecweabetn Configuration -pyramid dual pinch side rolls independent hydraulic -3 rolls driven hydraulic with gear unit each shaft side arms hydraulic move in 3 direction for keeping guided the profile being formed. NR. 2 set of rollers with the machine for pipe bending SIZE 159MM - SIZE 139,7 MM -Control panel console CNC programmable with automatic rolling, touch screen 15” , display the 9 axis of the machine with readout for manual use and fully programmable automatic forming -Electric power supply 3phase 400/50 Vac -40HP -Service manuals and operation books original. Additional set of rollers and tooling for specific application can be provided upon request Bending for HEB - IPE -UNP - ANGLE – T -SECTION- TUBULAR- IRON BAR ON EDGE -ETC..

Year of construction: 2019, condition: ready for operation (used), General Data Measurements width 700 mm Measurements depth 4000 mm Measurements height 1300 mm Iodpfew Uaiasx Aabetn Machine weight 1500 kg This TFM GM-SB-38CNC-2A1S was manufactured in 2019. It features a max bending capacity of 38 × 2 mm, bending speeds up to 65 °/sec, and motor power of 4 kW. Ideal for precise bending with a max bending angle of 180° and effective length over mandrel of 3200 mm. Consider the opportunity to buy this TFM GM-SB-38CNC-2A1S profile bending machine. Contact us for more information. Application Types Rolling

Condition: used, functionality: fully functional, We currently have a Roundo bending machine available for sale. This machine is capable of bending large-size wide-flange beams — even when cold — into radii or cambered shapes. It is a robust and versatile unit, ideal for companies looking to enhance or expand their steel-forming capabilities. Itodsxn I Rwspfx Aabon

Condition: used, Year of construction: 2017, pipe diameter (max.): 80 mm, mandrel length: 4,500 mm, Mandrel bending machine S8004 ----- For the production of dimensionally accurate pipe geometries with bending radii of up to 1.5XD → maximum bending performance pipe 76 x 4 mm (400 N/mm²) → maximum bending performance pipe 60 x 60 x 3 mm (400 N/mm²) → maximum bending performance pipe 76 x 2.9 mm (stainless steel) → total connected load 7 kW → pipe length 4.5 mtr Robust and durable steel construction in a force-locking connection - no construction susceptible to torsion due to, for example, the split construction of the bending head and mandrel carrier. Maintenance-free electromechanical drive of the bending axis. The touch display of the control enables simple and intuitive programming and use of the system. After the pipe has been pushed on, it is fixed in the carriage by the chuck. This enables the pipe to be positioned precisely and thus the creation of dimensionally accurate geometries. The standard also includes checking the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine does not give permission for this. This prevents incorrect operation. Optional additional features provide more convenience and increase the output and thus the efficiency of the system. Data is exchanged from the optional pipe calculation program TBS-3D (PC version) via USB stick or via FTP access from the computer to the machine control system. USB or LAN connectors (RJ45) are available as standard. Existing pipe geometries can be converted quickly and easily, for example, using the STEP format. Standard equipment: → Electromechanical drive of the bending axis 4 kW → Speed 2.9 rpm (=17°/sec.) → Bending direction left → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending shaft diameter 50 mm → Electronic length measurement ±0.1mm → Electronic twist measurement ±0.1° → Manual stop system (overtravel stops in length) → Manual locking system (15° in twist) → Three-jaw chuck for locking the pipe in the carriage → External control panel PLC control: → Touchscreen 10.1" → ETH 10/100, X2X Link, USB → Foot switch operation → Data transfer via network (W)LAN or USB → Material database Unique graphic programming: Simple geometries can be calculated directly on the machine. The control calculates the feed values directly after entering the length and angle and the bending angles. Hydraulics: → Hydraulic power 3 kW → Hydraulic pipe clamping with adjustable clamping pressure → Programmable early mandrel retraction Options (can be ordered as additional equipment): → Variable bending speed using frequency converters or servo motors Iedpfxettah Rj Aabotn → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + twist) → Mobile version (rollers) → Radius extension Pictures show new machine

Condition: excellent (used), functionality: fully functional, Year of construction: 1996, working width: 6,000 mm, sheet thickness steel (max.): 3 mm, sheet thickness aluminum (max.): 4 mm, Equipment: documentation/manual, The face design of the segmental machine structure and the swing-mounted bending beam on the kinematic mechanism enable the bending of various complex shapes from steel and aluminum sheet with a maximum bending angle of 145 degrees and a maximum upper beam stroke of 200 mm. The machine is controlled by a three-axis programmable controller, allowing operation in three modes: Manual, single – includes one program consisting of a single bending stage and one backgauge setting, which can be repeated any number of times. The program comprises 60 programmable blocks, each containing 10 bends and backgauge positions. The machine can bend steel sheet up to 3 mm thick and aluminum up to 4 mm. The hydraulic oil has been replaced and the entire control system has been renewed. Iodpsxflfmjfx Aabstn

Condition: used, Automatic Multi-purpose Iron Twister GLASER Type GDM 3 motor-driven rod twisting machine equipped with ring bending attachment, profile bending machine Year of manufacture: 1977 Twisting length: 1200 mm Twisting speed (Level 1): approx. 10 rpm Twisting speed (Level 2): approx. 20 rpm - Spindle drive via large geared motor - Arch and ring bending machine, not complete - with HAWE hydraulic unit up to 600 bar for auxiliary functions - 4-square tool holder for twisting tools Motor power: 3.3 kW Power supply: 380 Volt, 50 Hz Space required (L x W x H): 2120 x 720 x 1100 mm Iodjw Dgi Tepfx Aabotn Weight: approx. 600 kg Good condition

Condition: as good as new (ex-display), OMEC HP110 HYDRAULIC PROFILE BENDING MACHINE with PLANETARY MOVEMENT and DOUBLE ROLLER FEED – 3 DRIVE ROLLERS - TECHNICAL SPECIFICATIONS: - Hardened UPPER SHAFT diameter: 120 mm - Hardened LOWER SHAFTS diameter: 100 mm - Hardened UPPER ROLLER diameter: 320 mm - Hardened LOWER ROLLERS diameter: 300 mm - Working table height in horizontal position: 900 mm - Working table height in vertical position: 1600 mm - Installed power: 5.5 kW - Total weight: 3,800 kg - Overall dimensions (W x D x H) in horizontal position: 1400 x 1920 x 1370 mm Reference material: Yield strength 250 N/mm², Tensile strength 460 N/mm² PERFORMANCE: (material: Commercial grade steel) - Solid square section 60x60 mm – min. bending diameter 770 mm - Upright flat bar 100x30 mm – min. bending diameter 1,500 mm - Flat bar 150x35 mm – min. bending diameter 1,000 mm - Solid round bar 70 mm – min. bending diameter 900 mm - Angle profile external leg 100x100x10 mm – min. bending diameter 1,000 mm - Angle profile internal leg 90x90x10 mm – min. bending diameter 1,000 mm Iodpfow Ax Avox Aabetn - Tube 4" thickness 4.5, Ø114 mm, thickness 4.5 mm – min. bending diameter 1,400 mm - IPE flat flange 160 mm – min. bending diameter 1,200 mm - IPE upright flange 100 mm – min. bending diameter 1,750 mm - HEA flat flange 120 mm – min. bending diameter 1,500 mm - Square tube 80x80x4 mm – min. bending diameter 1,200 mm - UPPER SHAFT: Ø120 mm - Set of hardened rollers - Hydraulic 3-axis guide rollers for profile containment during bending, operated from the control console. These supports securely hold and guide the profiles both internally and externally, moving on three axes controlled by the operator. Manual profile guidance during bending phases is no longer required, as it is operated directly from the control console. - 2 digital position indicators for the bending rollers - Two rotation speeds (Slow/Fast) - Mobile control console - Dual Hydraulic drive (powered upper roller and 2 lower rollers) - Work axis configurable for both horizontal and vertical positions - Operating and maintenance manual - CE mark - Service keys

Condition: as good as new (ex-display), Flat, upright / Ø: 60 x 10 mm / 500 mm Solid, square / Ø: 35 x 35 mm / 900 mm Tube, round / Ø: 70 x 2 mm / 1000 mm Shaft diameter: 50 mm Ijdpfx Aspxmauoabotn Roll diameter: 138 mm bending speed: 4,5 / 9 m/min voltage: 400 V motor power: 0,6 / 0,9 kW dimensions WxDxH, approx.: 780 x 1040 x 1470 mm Weight, approx.: 360 kg Equipment: - Machine in stable welded steel construction - Roll drive via gearbox - Hardened rolls (standard roll set included) - Shafts hardened and ground - All switching and operating elements on mobile control panel with foot pedal for right/left rotation - Manuel adjustable straightening rolls - Can be used horizontally and vertically Options on request: - Hydraulic top roller infeed - Two-stage motor - Digital display - Brake motor for the production of precision sheets - Roll sets

Condition: excellent (used), Year of construction: 2013, Carton blank die-cutting machine, low operating hours. The machine is still connected and can be demonstrated. Immediately available. Itjdpfxoxluuks Aabon

Condition: like new (used), Year of construction: 2023, Mandrel Bending Machine S4501 ---- For the production of pipe geometries with bending radii from 1.5xD → Maximum bending capacity: pipe 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity: pipe 30 x 30 x 3 mm → Maximum bending capacity: pipe 42.4 x 2 mm (stainless steel max. Rp0.2 260 N/mm²) → Total connected load 3 kW → Pipe insertion length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and twisting axes. The control system's touchscreen display enables simple and intuitive programming and operation of the system. After the pipe is inserted, it is secured in the carriage by the chuck. This enables precise positioning of the pipe and thus the creation of dimensionally accurate geometries. The standard also includes a check of the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine will not issue a release. This eliminates the risk of incorrect operation. Optional additional features provide greater convenience and increase output, thus increasing the efficiency of the system. Data exchange from the optional TBS-3D pipe calculation program (PC version) takes place via USB stick or network. Existing pipe geometries can be imported using the software. Standard equipment: → 1.5 kW servo drive for the bending axis → Adjustable speed → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 120 mm → Bending shaft diameter 50 mm → Feed servo drive → Rotation servo drive → Three-jaw chuck for locking the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC control: → 10" color touchscreen → ETH 10/100, X2X Link, 2xUSB → Foot switch operation → Data transfer via LAN or USB network → Material database Unique graphical programming: Simple geometries can be calculated directly on the machine. The control system calculates the feed values and bending angles directly after entering the length and angle. Itjdpfx Ajtr U Hloabon Power consumption: 400V 16A Dimensions: L: 2.3 m x W: 1m x H: 1.4m Weight: approx. 1200 kg

Condition: good (used), functionality: fully functional, total length: 2,500 mm, Three-roll plate bending machine Motor-driven Max. sheet width: 2500 mm Max. sheet thickness: 4 mm Length of bending rolls: 2550 mm Iedpfx Aoxln Ahjabotn Upper roll diameter: 134 mm Lower roll diameter (each): 125 mm Sturdy design, good condition Ready for immediate use

Condition: new, Year of construction: 2025, Technical Specifications WS1,5x2050 1,5 meters Technical data Itodpsfwxnaefx Aaben Working length: 2050mm mm. Sheet thickness range: 1.5 mm Max. Angle: 135 Length: 2510mm Width: 960mm Height: 1580mm Weight: 600 kg

Condition: new, Special offer price for stock items. Only while stocks last. Price ex stock, plus VAT. Round bending machine HRM 610, Bernardo roll length: 610 mm Max. sheet thickness (400 N / mm2): 2,0 mm Roll diameter: 60 mm length: 1200 mm Depth: 550 mm Height: 1030 mm Weight approx.: 166 kg Features: - Top roller with horizontal insertion groove for producing tight radii. - Convenient pre-bending due to asymmetric roller arrangement - Easy removal of the finished workpiece due to swing-out upper roll - Lower and rear roller equipped with wire insertion groove as standard - Optimal price-performance ratio, standard with base frame - Roller drive by means of a solid gear transmission Itedpfx Aashmbpqsben - Inclinable rear roller for conical rounding - Bending rolls made of high quality steel - For the production of cones, tubes, cylinders,.... Scope of delivery. - Conical bending device - Bottom and back rolls with wire insertion grooves - Underframe

Condition: new, Hydraulic pipe S235JR: 54 x 4 mm Iodpscvvc Hefx Aabetn Aluminum tube: 54 x 5 mm Steel pipe: 54 x 2 mm Stainless steel pipe AISI 304/316: 42 x 3 mm Copper or brass tube: 54 x 4 mm Gas pipe for pipelines: 1 1/2" Max bending angle: 180° Max bending radius: 150 mm Engine power: 1.1 kW Voltage: 400 V Machine dimensions (W x D x H)*: 700 x 230 x 520 mm Weight approx.: 107 kg *without base. Base not included in delivery. It is of course available at an extra cost.