Used Die Forging Press for sale (15,364)

Condition: used, Year of construction: 1991, Technical details: pressure: 40 t daylight dimension : table/slide up: 450 mm throat: 375 mm ram stroke: max. 300 mm Table dimensions: 900 x 500 x 85 mm passage inside table: Ø 120 mm height over floor: 900 mm total power requirement: 15,0 kW weight of the machine ca.: 5,8 t dimension machine xH: 2,3 x 1,45 x 2,40 m further technical data: -size of the ram plate W: 900 x D: 500mm Blodpfsu Nfp Isx Aktjp -pivot hole in ram Ø 40 x 75mm -Hydraulics: tank capacity approx. 500Liter; operating pressure 275 bar; pump capacity 22,9 l/min. Two-hand operation and/or control panel *

Condition: used, Technical details: Pressure: 2,3 t stroke: 280 mm throat: 155 mm max. ram stroke: Vorlauf: 0,08 m/sec daylight dimension with clamping plate Slide/ up: 355 mm distance table/ram: max. 355 mm clamping plate on table: 280 x 280 mm passage opening in table: Ø 100 mm ram speed - forward: 0,08 m/s ram speed - reverse: 0,32 m/s mortise hole in ram: Ø 20 x 45 mm height over floor: 725 mm total power requirement: 1,1 kW weight of the machine ca.: 0,5 kg Bedpfx Aksu Nfwljtelp dimension machine xH: 0,6 x 0,7 x 1,6 m Press with mechanical 2-hand operation. Pressure test up to 2,3to performed. Good condition. *

Condition: excellent (used), Year of construction: 2001, pressure 100 t table length 2000 mm table width 1580 mm voltage 400 V Bsdpfx Akeucgqwotslp max. table loading capacity 10.000 / 20.000 kg total power requirement 18 kW weight of the machine ca. 22 t dimensions of the machine ca. 5,65 x 2,95 x 5,85 m Serial no: 03.246.00 max. Distance between columns (width) 1620 mm d upper table no swiveling 10t / swiveling 6t d lower table 22t

Condition: used, Year of construction: 1980, Technical details: pressure: 400 t stroke: 40 - 140 mm Bledpfxou N A Uus Aktep strokes / minute continous: 32 throat: 400 mm dayligth: min/max: 450/590 mm ram adjustment: 125 mm table-size: 1250x750 mm height over floor: 1130 mm total power requirement: ca. 31,5 kW weight of the machine ca.: 23,0 t machine dimensions LxWxH: 3,7 x 1,7 x 3,9 m dimensions electric cabinet LxWxH: 1,0 x 0,7 x 2,1 m further details: - clamping plate : L x W x H : 1260 x 760 x 100mm - with draw cushion device force 250kN, travel approx. 83mm - control via panel i.D. *

Condition: used, Technical details: Bedpeu N Ddwsfx Aktelp pressure: 250 t stroke: Dauerlauf-Leerlauf 40 mm slide stroke: verst./adjust. 36 - 126 mm adjustability of Ram: 110 mm clamping surface ram: 630 x 500 (lxb) mm clamping surface area: 1000 x 750 x 100 mm distance table/ram: 400- 526 mm passage opening in table: 400 x 360 mm operating pressure: 0,6 MPa MPa ejector path: 63 mm throat: 400 mm total power requirement: ca. 20,0 kW dimensions electric cabinet LxWxH: 1,2x0,65x2,1 m dimension machine xH: 2,9x1,2x3,4 m - two hand control - operation panel accessory: - foot plate 2200x1500x40mm *

Condition: new, neu Bodpfxewiqn Rs Aktslp ca. 14 - 16 Wochen ab Auf Türkei 87700 € 1657.53 € 130 to 4.5 mm 650 mm 950 mm 220 mm 1 - 132 mm 50 1/min 6 95 mm 70 mm 325 mm 500 mm 11 kW 1800 mm 1725 mm 3020 mm 8000 kg Welded steel frame construction 8-fold ram guide Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Hydraulic overload protection Two-hand and foot pedal operation Manual stroke adjustment Motorized ram adjustment Variable stroke rate via frequency converter Operating modes: * Adjustment mode * Two-hand release * Foot release * 2-stroke operation via light barriers * Continuous operation Touchscreen for * Stroke counter with preselection for continuous operation * Stroke rate adjustment * Lubrication intervals and duration * Alarm messages * Motor direction of rotation * Monitoring of inputs and outputs 2 free cams for connecting peripherals Automatic central lubrication Equipment in accordance with CE regulations Symbolic photos, picture incl. optional available bolster plate OPTIONS: vibration pads € 192,00 bolster plate o.r. hydr. overload safety device o.r. etc.

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 61200 € 1156.68 € 80 to 4 mm 600 mm 900 mm 200 mm 1 - 110 mm 60 1/min 6 80 mm 50 mm 300 mm 400 mm 7.5 kW 1600 mm 1500 mm 2750 mm 5700 kg Welded steel frame construction 8-fold ram guide Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Hydraulic overload protection Two-hand and foot pedal operation Manual stroke adjustment Motorized ram adjustment Variable stroke rate via frequency converter Bledpfx Aewiq I Djktsp Operating modes: Adjustment mode Two-hand release Foot release 2-stroke operation via light barriers Continuous operation Touchscreen for Stroke counter with preselection for continuous operation Stroke rate adjustment Lubrication intervals and duration Alarm messages Motor direction of rotation Monitoring of inputs and outputs 2 free cams for connecting peripherals Automatic central lubrication Equipment in accordance with CE regulations (sample photos) OPTIONS: vibration pads € 192,00 bolster plate o.r. hydr. overload safety device o.r. etc.

Condition: used, Technical details: pressure: 40 t distance between columns: - mm stroke: 500 mm throat: 360 mm Bljdpfow Smukjx Aktop distance table/ram: max. 800 mm daylight dimension : table/slide up: 600 mm ram stroke: 500 mm ram speed - forward: 0,100 m/s ram speed - reverse: 0,450 m/s Table dimensions: 750 x 500 mm passage inside table: 200 mm surface area of ram: 360 x 450 x 72 mm mortise hole in ram: 40 x 75 mm height over floor: 700 mm total power requirement: 13 kW weight of the machine ca.: 3,2 t dimension machine xH: 1,75 x 1,15 x 2,95 m Operation via two-hand control panel. (and one-hand operation) *

Condition: used, Year of construction: 2007, operating hours: 7,40,00,000 h, MAN ROLAND 205 E0B Bsdpfeytb Egex Aktelp • 5-color • Max. format: 520 mm x 740 mm • ProfitPlus Premium package including: - Double sheet feeder - Baldwin cleaning unit - Complete carton guide - EPL (Ergonomic Plate Loading) • Kersten antistatic system • Bacher register system • Powder sprayer: Grafix 72 Digital Plus • Alcosmart • PressManager Smart Interface • Smart R 200 Online • Remote control: RCI for ink and register • ColorPilot Smart • Automatic wash-up device for: - Ink rollers, impression cylinders, blanket cylinders • Electronic sheet feeding control • Nonstop delivery • Delivery-side control panel • JobCard Reader • Carton device • In production • Location: Germany • Availability: immediately

Year of construction: 2026, condition: new, Bosporas Machinery is a manufacturer of coil processing, press feeding and metal forming systems, delivering high-performance and customized industrial solutions worldwide. Our press solutions are designed for punching, perforating, embossing and sheet metal forming applications. Depending on production requirements, we offer advanced servo punch press systems for flexible programmable production and high-speed mechanical presses for continuous mass production. These machines can be supplied as standalone units or integrated into complete coil-fed automatic production lines. ⚙️ AVAILABLE PRESS SOLUTIONS 🔹 SERVO PUNCH PRESS The Servo Punch Press is designed for precision, flexibility and intelligent production control. Key Features: 40 Ton punching capacity 6 tool stations for multi-tool operation Dual-servo controlled X-Y punching system Punching at programmable coordinates 22 kW hydraulic punching drive Up to 90 strokes per minute Automatic scrap conveyor system Advantages: High precision punching performance Programmable motion profiles Lower noise and reduced maintenance Energy efficient operation Fast setup for different part designs 🔹 PERFORATION HIGH SPEED MECHANICAL PRESS The High-Speed Mechanical Press is ideal for continuous perforation, embossing and repetitive punching operations in mass production environments. Suitable For: Sheet metal punching Perforating Embossing Tool & die applications High-volume production lines Advantages: High production speed Stable continuous operation Reliable mechanical drive system Ideal for repetitive operations Cost-effective mass production solution 🔧 ENGINEERING FEATURES Robust industrial machine construction PLC & HMI control systems Easy integration with feeders and automation lines Tooling flexibility based on product design Long service life and low maintenance structure ⚡ OPERATIONAL ADVANTAGES Two technologies for different production needs Flexible solutions from custom parts to mass production Standalone or turnkey line integration Improved efficiency and reduced downtime Short lead time compared to European manufacturers 🏭 APPLICATION AREAS Sheet metal manufacturing Perforated panel production Electrical cabinets HVAC products Bodpfx Akjy Anr Tetjlp Construction components Automotive parts White goods industry 🧩 OPTIONAL CONFIGURATIONS Coil feeding integration Decoiler & feeder systems Custom dies and tooling Conveyor systems Automation upgrades Turnkey production solutions 📸 REFERENCE PROJECTS Images and videos can be shared showing different press systems successfully operating in various industrial applications. Additional references and technical details are available upon request.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, punching force: 330 t, Machine for punching, embossing, waste removal, and blank separation - as is - System equipped with a high-performance sheet feeder designed for automatic NON-STOP operation ⦁ For fully automatic punching, creasing, and embossing with or without gripper edge ⦁ For removal of internal waste as well as lateral and rear sheet edges ⦁ For stack-like delivery of punched and waste-removed sheets with attached gripper edges or Bsdpfx Ajww E Nrektslp ⦁ For separation of gripper edges and subsequent stack-like delivery of the remaining sheets ⦁ With a patented gripper carriage registration system for highest registration accuracy ⦁ With a pile stacker machine enabling fully automatic interleaving sheet feed as well as NON-STOP stacking and does not require modification even for the smallest job sizes (exchange table with comb structure) ⦁ Interleaving sheet magazine with electronic level monitoring, refillable during production ⦁ With Centerline equipment ⦁ With automatic pallet change device at the delivery section Specification Maximum sheet size: 760 x 1060 mm Minimum sheet size: 350 x 400 mm Maximum punching force: 3.3 MN (330 t) Speed: 9,000 sheets/hour Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/m² Corrugated board up to 3 mm (max. sheet warp 4%) Equipment: Optical sheet register (Dyset) Automatic non-stop feeder Waste removal station Blank separation station Centerline Fully automatic pallet changing device at delivery Incl. platform Quick-lock frames at all tooling stations

Condition: used, Year of construction: 2003, Year of manufacture: 2003 Technical specifications: 2 colors + varnishing unit Max. sheet size: 740 × 1,040 mm 159 million impressions Rolandmatic Tresu varnishing unit CCI ink remote control IR/TL dryer Grafix Cantronic powder sprayer PPL power plate loading Automatic plate changing All washing systems Currently in production and operational Availability: available in the short term Price: upon request Location: Germany Bledpfez Hnukjx Aktep

Condition: excellent (used), Catalog number 6763 TECHNICAL DATA - 5 hydraulic cylinders - 3 top cylinders - 2 side cylinders - max. length of bonded elements: 3100 mm - max. height of bonded elements: 2100 mm - engine power: approx. 2 kW - top cylinders: hydraulic - side cylinders: hydraulic - dimensions (L/W/H): 3750/1000/2700 mm - weight: approx. 800 kg ADVANTAGES – very good condition – used press – unpainted – designed for professional use Net price: 13900 PLN Net price: 3233 EUR Net price calculated using an exchange rate of 4.30 PLN/EUR (the price may change in case of significant exchange rate fluctuations) Bedpfjzulxljx Aktelp

Condition: used, Year of construction: 2004, functionality: fully functional, Man Roland Uniset 75 578 Cut Off 3 Towers 4 Reel Stand Bljdpfjy Nkx Asx Aktep

Condition: good (used), Lechner IV B Hydraulic Bookbinding Press The machine is ready to operate. Bedpfx Aj Ad Hmgoktjlp The press has a built-in hydraulic unit. Four stations. Irreplaceable in bookbinding for the production of books, pads, etc.

Condition: excellent (used), High-end hydraulic tool from the renowned manufacturer CEMBRE. This device delivers high clamping force and convenient operation thanks to battery power. Robust construction and reliability – equipment used in professional applications. 📊 Technical specifications: Bjdpfez Smyrox Aktslp Manufacturer: CEMBRE Model: B35-50D Clamping force: 35 kN (approx. 4 tons) Max. cross-section: up to 150 mm² (Cu) Power supply: battery-powered Year of manufacture: 2010 📦 Included: CEMBRE hydraulic press Battery Charger Transport case Documentation Additional items as shown in the photos 📦 Condition: Very good technical condition Fully functional Normal signs of use Ready for work

Condition: excellent (used), The DAGE Series 4000 Bond Tester is a professional device designed for performing Bond Pull and Die Shear tests in the semiconductor and electronics industries. This device is used in quality control laboratories, research and development departments, and during the production of microelectronic components. This unit is equipped with a precision positioning table, joystick controls, a keypad panel, and work lighting. The set also includes the original PCI control card (Baldor NextMove PCI-2 Motion Control Card) and additional electronic components visible in the photos, which are a valuable addition to the set. Technical data: Manufacturer: DAGE (Nordson DAGE) Blsdpfez Snf Nex Aktep Model: DAGE Series 4000 Bond Tester Year of manufacture: 2010 Power supply: 110 / 230 V AC, 1-phase Frequency: 50/60 Hz Power: 250 VA Control: joysticks and keypad Precision XY positioning table Required compressed air: 4 bar (oil-free) Vacuum connection Excellent visual condition. The set being sold is consistent with the presented photos and includes all visible components, including the additional PCI control card.

Condition: excellent (used), Year of construction: 2012, TruBend 5230 including robot, well-maintained, in excellent condition. Bedpfxjz Uxk He Aktslp

Condition: new, Die Cutting Machine ML-800 NXL The machine is brand new. It is the strongest machine on market, in this size. Format: 830 x 590 mm Weight: 2500 kg Power supply 380 V Engine: 3 kW Equipment: - Electromagnetic clutch and brake - Quick assembly frame - 3 modes: continuous, with time delay, manual - Central lubrication - additional safety cover - Tools and instructions with documentation CE. We provide installation and training. Blsdpfe Aaw Umex Aktep We provide a warranty of 12 months.

Condition: good (used), Nagel Citoborma 280B Paper Drill The unit is in 100% working order. It is one of the latest models. The drilling table is adjustable in all directions (laterally and front-to-back). It features stops for setting the drilling spacing. The installed table is an enlarged version. Additionally, the paper drill is equipped with an automatic table lock that releases after every cycle. Excellent condition. Robust construction – weight: 76 kg. Power supply: 380V. Two drilling heads with an adjustable spacing range of 45–120 mm. Drill bit diameter: 2–20 mm. Stack height: 60 mm. Blsdpfxoz S Upms Aktjp The machine has undergone a full inspection. Includes drill bits, tools, a new cutting stick, and an instruction manual.

Condition: good (used), Stago PB 2015 Paper Drill The latest model from the manufacturer Stago; this machine comes from the office of a large company. The unit is 100% functional. The drilling table is adjustable in all directions (laterally and front-to-back). It features stops for setting the drilling spacing. The installed table is an enlarged version. Additionally, the drill is equipped with an automatic table-locking mechanism. Robust construction – weight approx. 70 kg. Power supply: 380V. Two drilling heads. Drill bit diameter: 2–10 mm. Stack height: 60 mm. Bodsz S Uwqopfx Aktjlp Adjustable spacing between the heads. The drill has undergone a full inspection. Includes drill bits and tools.

Condition: excellent (used), pressing force: 5 t, For sale: Schling DUO 5T pneumatic press. Bsdpfjz Sarhjx Aktolp

Condition: excellent (used), For sale is a complete, industrial pneumatic press in a workshop configuration, ideal for punching, stamping, pressing, or other assembly processes. Blsdpfxjz Sawde Aktep The set includes: • a pneumatic column press with a robust, steel construction • a control valve, actuator, and pneumatic distribution system • an integrated control panel with an emergency stop switch • a steel work table with adjustable side guides • a power cabinet, distribution board, and cable routing • a table on wheels with a transport brake Drive: pneumatic power supply Control: solenoid valves, start/stop buttons Power supply: 230 V (electrical system integrated into the base) Technical condition: very good. Used, fully functional set ready for operation in a workshop. Industrial design, not for amateur use.

Condition: good (used), Herzog Heymann KL112-6 Pharmaceutical Folding Machine + Press and Stacking Made in Germany. The world’s highest-class folding machine. The machine is ready for production. Infinitely variable feed and folding speed adjustment. 6-cassette module. Vacuum feeding Desta BAS 350 platen press HH 177 stacking delivery This machine is ideal for folding pharmaceutical leaflets thanks to its low fold and large number of cassettes. Cassette soundproofing. Technical specifications: Maximum format: 350x500mm Weight: 650kg Blodpfx Ajz R Ip Dektsp 380V power supply

Condition: good (used), Code: 0454 Brand: CASOLIN - ITALY Model: EASY - CE Standard Hydraulic automatic single-bar clamp press for window and door frames – CE Standard Technical data: Min/max working length mm 250/3000 Min/max working height mm 340/1900 Min/max nominal vertical thrust pressure 880/8800 kg Min/max nominal horizontal thrust pressure for cylinder 280/2800 kg Bjdpo Agf Dtofx Aktolp Horizontal pistons stroke 200 mm Pump power 3 Kw Width of the bars 120 mm The upper mobile bar is guided through its its movement by a unit composed by 2 gears and 2 racks positioned on the rear of the machine The regulations of the oil pressure of the vertical and horizontal cylinders are separate and adjustable by through the use of two handwheels The lower press bar can work in 2 positions Control button panel in ergonomic position with pensile arm Overall dimensions mm 3870 x 1040 x 2900 h Overall dimensions for transport mm 3870 x 1040 x 2690 h Weight kg 1800