Used Die Spotting Press for sale (17,357)

Condition: used, 12-piece die block for GEWA press brake Bending tool for press brake, lower tool Type: 0255/14 V-block size: 16 mm for 90° V-block angle: 88° Die depth: approx. 8 mm Height: 120 mm Max. pressure per meter: 100 t/m Die base width: 60 mm Total length: 4175 mm Nwjdpewbvmiofx Aa Djb Segment lengths: 4 x 835 mm, 1 x 400 mm, 1 x 200 mm, 1 x 100 mm, 1 x 50 mm, 1 x 40 mm, 1 x 20 mm, 1 x 15 mm, 1 x 10 mm Weight: 110 kg Very good condition

Condition: used, Frame die-cutter - Swivel frame die-cutter - Flatbed die-cutter - Platen die-cutter - Eccentric press Punch + feed for the use of bandknife punching tools Flatbed die cutter HELMERDING type PSH 25 Com. No. EP 97784 Machine. No. 6073 Year of construction 1998 Compressive force 25 ton. Clearance between the tie rods 700 mm Table surface = installation space 800 x 670 mm Table surface = installation frame width 510 x depth 440 mm, plate thickness 20 mm Plunger surface 800 x 670 mm Hole in the table 490 x 420 mm Plunger stroke 45 mm Ram adjustment travel 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min. Motor power 15 kW Mains connection 400 Volt, 50 Hz - Controlled drive for infinitely variable stroke rate - Pneumatic clutch-brake combination - ram compensation cylinder - VOGEL automatic central lubrication system - solid base plate with 4 swinging elements under the machine Nedpfx Ajdzqmzja Dowb Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons good condition The machine was formerly used for cutting out cardboard blanks. Ideal for cutting out non-woven fabrics or similar for breathing masks.

Condition: used, Double column hydraulic press SMG type HBP 200 - 2000 / 2000 make no. 7.4117 year of construction 1986 - rebuild 2000 pressure force 200 ton. Stand passage front 2050 mm column passage sideways 2030 mm table area 2800 x 2000 mm ram area 2000 x 2000 mm ram stroke 700 mm installation height max. 1850 mm Table height above floor 750 mm ram retraction force 33 ton. Rapid feed speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety distance 230 mm Nwsdpfx Aaedzp Tcs Deb Motor power main motor 75 kW Motor power control pump 11 kW Mains connection 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots at the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking at TDC - Measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS SPS S7 - adjacent switch cabinet - 2-hand control panel adjacent - ground level installation - central lubrication - Operating instructions with circuit diagrams Space requirement of the press standing L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space requirement for horizontal transport L x W x H 5900 x 3250 x 2950 mm weight 38 ton. The machine was used as a production press at Volkswagen until 2000. From 2000 the machine was used as a tool testing press in a tool shop. good condition

Condition: used, Year of construction: 1980, pressure 40 t table length 670 mm table width 570 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Nodpst Hxczefx Aa Dswb

Condition: used, Year of construction: 1995, pressure 80 t table length 1.200 mm table width 1.000 mm 250 mm 1.200 mm max. table load 7.000 kg distance between columns 1.100 mm voltage 400 V weight of the machine ca. 11,0 t dimensions of the machine ca. 4,40 x 2,58 x 3,66 m - Serial No.: 760/12312 Dimensions of upper and lower plate: 1.200×1.000 mm. Press upper plate is tilting by 150° Lower plate tilting by ±70° at front/back side The press is equipped with: - 2 energy accumulators in order to better Nwodpovbwitsfx Aa Deb gauge the adjustment of the mould halves - an automatic wax injection unit to check quality of pre-production mouldings - hydraulic ejection unit on lower plate

Condition: good (used), Various press brake tools, punches, dies Bending length 2500 + 3050 mm Nwodpfxew Emf Ds Aa Deb Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 2002, Manufacturer: Millutensil Nsdpfxowpkv Is Aa Dewb Type: MIL 203 Control: Siemens SIMATIC OP7 Year of manufacture: 2002 Pressure 0 - 250 Bar T Size T-22 Opening force 35 Ton Closing force 150 Ton Distance between columns 2130 mm Table height above floor 770 mm Upper table rotation 180 degrees Specifications Metric US Standard Capacity 30000 Distance between the columns 2130 mm Table length 2000 mm Table width 1500 mm Table height 1500 mm Run-in speed 3900 - 4800 mm/min. Working speed 480 mm/min. Return speed 2100 - 3000 mm/min. Dimensions (approximate) Length 6150 mm Width 3500 mm Height 4800 mm Weight 28000 kg Please note: The information on this page has been obtained to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual conditions. We recommend that you verify all important details.

Condition: good (used), Manufacturer: Millutensil Type: BV 25 PM Year of construction: 1987 Closing force up to 18000 Kg Opening force up to 15000 Kg Driven table in & out feed Upper table 270 Gr Upper size 900 x 550 Specifications Metric US Standard Distance between uprights 930 mm Installation height 760 mm Table length 755 x 755 mm ram stroke 600 mm Starting speed 1000 mm/min. Working speed 1000 mm/min. Return speed 1000 mm/min. Table rotation 360 rpm Dimensions (estimate) length 1350 mm width 1350 mm Height 2000 mm weight 1500 kg Nwjdpfx Asrr Ui Rea Dsb

Year of construction: 2005, condition: excellent (used), machine/vehicle number: 47885/05, pneumatic punching of window profiles Nedpfx Aeff Apisa Dowb Stroke 20 mm

Condition: good (used), Year of construction: 1988, machine/vehicle number: 03105, clearance between the columns: 1,300 mm, table width: 1,200 mm, table length: 1,500 mm, Weight: approx. 16,000 kg, table size: approx. 1500x1200 mm, distance between top plate and bottom plate max is 1550mm, with sliding table and separate control/operating panel Nwjdpfjtdnnmsx Aa Dsb

Condition: like new (used), Year of construction: 2009, functionality: fully functional, Table size 2600*1800mm maximum daylight 2200 mm Nwjdpferl Irkex Aa Deb clamping force 300T table size 2600*1800mm max day light 2200mm clamping force 300T

Condition: used, Year of construction: 1987, pressure 4000 kN table length 2500 mm table width 2000 mm dayligth 2500 mm stroke 2600 mm tank capacity 1000 l Nsdpfjvxwi Uex Aa Dowb total power requirement 56 kVA weight of the machine ca. 85 t dimensions of the machine ca. 9,2 x 3,1 x 8,2 m integrated wax-injection unit with 0-5 bar

Condition: reconditioned (used), Platina die-cutting machine Rabolini mod. Imperia D, CE marked. 800/1200 mm working format, Pneumatic clutch, Self-centering frame, 3 working modes: single stroke/continuous/temporized, Nwedpfx Aaertnbbe Dob Acoustic warning, Automatic, centralized and programmable lubrication, Suspended control console, copy counter, Picard steel plate, Complete carterization, Safety configuration with sensitive devices and interlocked protections, in full compliance with current occupational safety and hygiene regulations. Machine accompanied by " DECLARATION OF CONFORMITY " Overhauled machine.

Condition: used, Year of construction: 1980, pressure:24 t table length:1060 mm table width:650 mm Smallest opening:165 dimensions of the machine ca.:1300 x 700 x 1500 mm Nodpfx Aajufufbo Dswb This Millutensil die spotting / tryout press has a capacity of 24 tons, this machine you can use for die en mould spotting press. This kind of machines are used for splitting, adjusting, maintenance and try-out operations on dies and moulds. This machine is produces by Millutensil s.r.l. in Italien.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 02.291.00, installation height: 950 mm, distance table to ram: 700 mm, retraction force: 450 t, pressing force: 100 t, oil tank capacity: 200 l, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Pressing force: max. 1,000 kN Retraction force: max. 450 kN Clamping plate size: 850 × 1,100 mm Installation height: 950 mm Max. installation height (steps 100 mm): 1,150 mm Ram stroke without swivel device: max. 700 mm Ram stroke with 90° swivel device: max. 700 mm Ram stroke with 180° swivel device: max. 1,000 mm max. possible ram stroke (steps 100 mm): max. 1,200 mm Mold weight: max. 5,000 kg Load of the upper clamping plate: max. 2,500 kg Load of the tilting device: 3000 kg Nwjdpfsu Szzcox Aa Djb Tilting angle: 65° Positioning accuracy Plane parallelism: 0.02 mm/1,000 mm Horizontal positioning accuracy: 0.04 mm Closing speeds Closing speed: max. 50 mm/s Opening speed: max. 50 mm/s Standard carriage speed: max. 50 mm/s Increased carriage speed: max. 200 mm/s Swivel-off speed standard: max. 50 mm/s Swivel speed increased: max. 180 mm/s Tilting speed standard: max. 50 mm/s Increased tilting speed: max. 100 mm/s Hydraulics Closing system pressure: max. 190 bar Opening system pressure: max. 200 bar Injection unit Pressure: 4-10 bar Volume: 3 l Ejector Table ejector force: max. 35 kN Ejector stroke table: max. 130 mm Ejector movement table: max. 100 mm Ejector force ram: max. 48 kN Ejector stroke ram: max. 150 mm Die cushion Die cushion force: 250 kN Size: 550 x 750 mm MACHINE DETAILS Connected load: max. 10 kVA Drive power: max. 7.5 kW Tank capacity: 200 l Machine weight: 8,500 kg

Condition: good (used), Year of construction: 1986, Power: 400kN Size of bolster: 900 x 1.280 mm Size of ram: 900 x 1.2200 mm Weight of mold: max. 7.000kg Power main motor: 7,5 kW Nwsdpfx Aaothdbnj Deb Stroke: 1.000 mm - With movable bolster - Bolster can be swiveled Weight: app. 7.000kg

Condition: excellent (used), Year of construction: 2022, clearance between the columns: 2,130 mm, overall weight: 56,000 kg, retraction force: 55 t, clamping force: 2,000 kN, MIL263 straight version for floor installation few operating hours Njdpfswu Upisx Aa Dswb Siemens S7-1500 / Multipanel TP1200 diagnostic system 2 pcs. Sitema safety catch lower pull-out table; upper machine table tiltable by 180 degrees rotary table with 5 positions electronic parallelism control separate hydraulic unit on trolley for core pulls 4+4, standard version pump 8 liters/min, 2.2 kW

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, year of last overhaul: 2023, punching force: 300 t, We offer a choice of two identical 2006 machines. 2006 IBERICA 105 SPEED Max sheet size : 750 x1050mm, Min Sheet size : 350 x 400mm, Max mechanical speed : 9000 sph, Max impression strength : 300 tons. Max Carton board : 1.5mm, Mini Paper : 90/ 100 gm2, Max Corrugated board : 3mm, Direct Pallet loading Non stop feeder, Full complement of infeed table furniture, Left hand side pull register lay with sensor, Touch screen, Double action stripping, Automatic Non stop delivery with belt and programmable counter, Centre line, Quicklock on chase and stripping, Micrometric thin plate system, Elevated, Complement of stripping equipment PRICE: £110,000 Ex works for either Nedpfx Aoqzhr Dja Djwb

Condition: new, Year of construction: 2025, functionality: fully functional, Place: Austria Available immediately Nsdpfexy Nkpex Aa Djwb

Condition: good (used), Heidelberg OHT „windmill” Letterpress Nwjdpfx Aswxtb Sja Dsb Machine for die cutting, printing, creasing, perforating numbering, etc. The condition of the machine is very good, after inspection. 100% original, without modifications. This is a machine from the end of production, the distinguishing feature of this version is the exclusive roller paws, a drawer under the machine and a large wheel protection cover, a red knob on the piston lever. Ink system. Full set of accessories and tools. Machine format 26x38cm Weight 600gsm Speed ​​5000 sheets/h Weight 1200kg Power supply 400V Fully complete, two frames, spare elements, documentation included. A very rare machine on the market.

Condition: good (used), Adast Grafopress GPE letterpress machine Very good condition, ready for production, after inspection. The machine has all the safety features. Export version. The equipment includes printing rollers. Nwsdsv E A U Nspfx Aa Dob The device is used for die cutting, printing, creasing, numbering, etc.

Condition: good (used), Year of construction: 1962, functionality: fully functional, machine/vehicle number: 21860, Cylinder Die-Cutter Nwsdoxltnpjpfx Aa Deb Heidelberg SBG 56x77 Serial Number 21860

Condition: used, Year of construction: 1988, pressure 400 t distance between columns 1100 mm stroke 250 mm no. of strokes 25 - 75 /min distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1100 x 965 mm capacity of ejector in table 30 t ejector stroke of ejector in table 80 mm Nwjdpevuuknofx Aa Deb capacity of ejector in ram 3 t stroke of ejector in ram 60 / 70 mm ram surface 980 x 800 mm column travel -side 800 mm ram adjustment 20 mm power capacity 80,0 + 5,5 kW weight 47,0 t Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m weight of switch cabinet 1,4 t dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: good (used), Bookbinding Press 50×40 with Base Nodpfxjx N D Tys Aa Dowb The machine is fully operational and ready for use. Format: 500×400 mm Pressure: 5 tons

Condition: used, Year of construction: 2003, pressure 400 t Nwodpovzxpusfx Aa Dsb distance between columns 1060 mm stroke 450 mm no. of strokes 15 - 30 /min distance table/ram, max. stroke up, adjustment up 1160 mm table surface area 1000 x 700 mm capacity of ejector in table 2 x 16 t ejector stroke of ejector in table 125 mm Die cushion pressure in table 120 t Die cushion stroke in table 2 mm capacity of ejector in ram 2 x 4 t stroke of ejector in ram 100 mm ram surface 1000 x 700 mm column travel -side 630 mm power capacity 55,0 kW weight 50,0 t year of manufacture 1986 - overhaul 2003 multi-station press with automatic parts feed, Transfer, drawing cushion in table (2. stage) as is where is, WITHOUT putting into operation, stored in dismantled condition