Used Die Spotting Press for sale (38,287)

Year of construction: 1973, condition: good (used), machine/vehicle number: 699, pressure power: 40 t table size: 670 x 470 mm tappet area: 670 x 470 mm passage between columns: 620/470 mm max. mounting height: 740 mm pressure speed: 20 mm/s rapid move: 50 mm ejector power: 3 t electrical connection: 380 V, 9,5 kW Ibedpfx Ajy Dpboabjc space needed: 2200 x 1875 x 3000 mm weight: 2400 kg

Condition: used, Year of construction: 2005, functionality: fully functional, PERFORMANCE AND DESIGN: Pressing Capacity: 26-100 T (adjustable) Maximum Return Force: 45 T Table Dimensions: 1,600 x 1,300 mm Maximum Table Load Capacity: 12,000 kg Distance – Ram to Lower Table (Max.): 1,700 mm Frame Type: 4-column Overall Dimensions approx. (W x D x H): 4,900 x 2,800 x 5,500 mm Total Weight approx.: 17,000 kg T-slots and drillings to DIN 650 – 22 mm HYDRAULIC UNIT: Hydraulic Pump (Brand: REXROTH): SYDFE2x/071R-PPA.. Motor Power: 15 kW Max. Operating Pressure: 200 bar Pressure Accuracy during Pressing Stroke: +/- 5 bar Oil Tank Volume: 475 L Hydraulic Oil Specification: HLP 36 ELECTRICAL SYSTEM ACCESSORIES ELECTRICAL CONNECTION: - Main Supply: 400V AC - Control Voltage: 24V DC - Frequency: 50 Hz - Hydraulic Main Motor Connection: 15 kW - Total Connected Load approx.: 21 kW FEATURES • 180° foldable ram plate up to 7.5 tons (tilted) • Ram ejector 5.6 tons, 160 mm stroke • Stroke extension by 300 mm • Increased speed DOCUMENTATION • Hydraulic diagram • Electrical diagram • Technical drawing • Data sheet Iodpexd Tv Dofx Aabebc FUNCTIONS AND DESCRIPTIONS CONTROL OF THE PRESS: The press is operated via the operator panel. • Raise/lower the ram plate • Tilt the ram plate • Extend/retract the table • Operate the ejector • Set press force The control system is Siemens Simatic S7-634.

Condition: used, 12-piece die block for GEWA press brake Bending tool for press brake, lower tool Type: 0255/14 V-block size: 16 mm for 90° V-block angle: 88° Die depth: approx. 8 mm Height: 120 mm Max. pressure per meter: 100 t/m Die base width: 60 mm Total length: 4175 mm Ibodpfx Aaowbvmisbec Segment lengths: 4 x 835 mm, 1 x 400 mm, 1 x 200 mm, 1 x 100 mm, 1 x 50 mm, 1 x 40 mm, 1 x 20 mm, 1 x 15 mm, 1 x 10 mm Weight: 110 kg Very good condition

Year of construction: 1986, condition: repair required (used), functionality: unexamined, machine/vehicle number: 2889 / M, Used, fully functional platen die cutter, appropriate for its age. Features include a centered clamping frame for tools, hardened die plate, and single-sided die pressure adjustment (unlike most others, where the left and right arms must be adjusted separately). Please note: the die pressure adjustment is somewhat stiff. According to the manufacturer, the central bushing—which synchronizes the right and left arms—is likely worn. Estimated cost for repair including refurbishment and transport is €10,000–€15,000. According to the manufacturer (based in Spain), repairs can only be performed at the factory. The machine is operational, though increased manual effort is currently required. Moreover, the machine's safety features are not up to current standards. All safety devices are functional: the table safety bar works, as does the rear guard at the tool. A safety cage is fitted for the side, which is included in the purchase price. The platen can be operated manually or automatically, with adjustable timing settings. We are selling the machine due to a new acquisition. Machine is still in use, available for sale at the end of October 2025. We will continue working with it until then. A suitable forklift is available on-site for loading. Machine weight is 5–6 tons—please ensure you have appropriate heavy-duty equipment if purchasing. Current new price is €90,000 net; the hardened die plate alone currently costs €6,200 net. Ibodpfjw Tifujx Aabjc

Condition: like new (used), Year of construction: 2020, operating hours: 1,000 h, functionality: fully functional, punching force: 300 t, overall weight: 18,000 kg, Max. sheet size: 1060×740mm Ibjdpfx Aswhvq Ioaboc Min. sheet size: 400×360mm Stock range: Paperboard157~2000gsm Corrugated board (E,B LUTE) Min. gripper edge: 4mm Max. die-cutting size: 1040×730mm Max. pressure: 250tons Max speed: 7500sph Rules height: 23.8mm Main motor capacity: 11kw Total power capacity: 23kw Dimensions (L×W×H): 6000×4200×2400mm Net weight: 18,000kg

Condition: used, Year of construction: 1985, table length 1.000 mm table width 800 mm weight of the machine ca. 5 t dimensions of the machine ca. 2900 x 1800 x 3300 m +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Ibjdshc Uzcepfx Aaboc +++++

Condition: good (used), Various press brake tools, punches, dies Bending length 2500 + 3050 mm Siegfried Volz Werkzeugmaschinen Ibsdpfsw Emf Dsx Aabjc Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 1998, Performance and Design Pressing Capacity: 26–100 t (adjustable) Return Force: 45 t Table: 1,600 × 1,300 mm Max. Table Load: 5,000 kg Distance Ram – Table (max.): 950 mm Frame Type: 4-column Overall Dimensions (W×D×H): approx. 3,400 × 4,200 × 3,700 mm Total Weight: approx. 8,500 kg T-slots/Bores: DIN 650, 22 mm Hydraulics Pump: Rexroth SYDFE11x71RN0030CAM Motor Power: 7.5 kW Max. Operating Pressure: 200 bar Press Stroke Pressure Accuracy: ± 5 bar Tank Volume: 215 l Ibsdexd Tiqopfx Aabec Hydraulic Oil: HLP 36 Electrics Main Supply: 400 V AC Control Voltage: 24 V DC Frequency: 50 Hz Main Motor Connection: 7.5 kW Total Connected Load: approx. 10 kW Features 180° tiltable ram plate (up to 3 t) Ejector in table (3.5 t, 130 mm) Oil ports for core pull Digital measuring system Material feeding (injection molding) via ram plate possible Speed increase possible Documentation Hydraulic schematic Electrical schematic Technical drawing Data sheet (used spotting press, 100t press, Reis hydraulic press, 4-column press, toolmaking press, forming press, injection molding press, used machine, industrial machine, hydraulic press, tool testing press) Are you looking for a custom-fit machine? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they meet all aspects of the national Brazilian safety guideline NR 12, which builds on these standards. Our key strength is special-purpose machine construction and press automation. We offer tailor-made hydraulic presses, press brakes, and guillotine shears at surprisingly affordable prices. We use components from leading European manufacturers for the hydraulics of our presses.

Condition: used, Frame die-cutter - Swivel frame die-cutter - Flatbed die-cutter - Platen die-cutter - Eccentric press Punch + feed for the use of bandknife punching tools Flatbed die cutter HELMERDING type PSH 25 Com. No. EP 97784 Machine. No. 6073 Year of construction 1998 Compressive force 25 ton. Clearance between the tie rods 700 mm Table surface = installation space 800 x 670 mm Table surface = installation frame width 510 x depth 440 mm, plate thickness 20 mm Plunger surface 800 x 670 mm Hole in the table 490 x 420 mm Isdpfodzqmzex Aabjbc Plunger stroke 45 mm Ram adjustment travel 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min. Motor power 15 kW Mains connection 400 Volt, 50 Hz - Controlled drive for infinitely variable stroke rate - Pneumatic clutch-brake combination - ram compensation cylinder - VOGEL automatic central lubrication system - solid base plate with 4 swinging elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons good condition The machine was formerly used for cutting out cardboard blanks. Ideal for cutting out non-woven fabrics or similar for breathing masks.

Condition: ready for operation (used), Press Machine, Traveling Head Cutting Machine, Punching Machine, Stamping Press, Hydraulic Gantry Press,Sanson Chiesa Turbo, Used Machine Manufacturer: Sanson Model: Chiesa Turbo Overall Dimensions: 3480 x 1040 x 2420 mm Ibsdpfx Aaeukpcysbjc Weight: 5500 kg Electrical Data: 380V, 50 Hz Working Cylinder Diameter: 250 mm Operating Pressure: 200 bar Stroke Length: 120 mm Pressing Surface: 900 x 1000 mm Cutting Table: 1040 x 2500 mm

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, table width: 980 mm, table length: 750 mm, Insolvency auction - all machines functional and ready for demonstration. Property of a German GmbH TECHNICAL DETAILS Max. clamping force: 300 kN Max. load capacity of the lower plate: 4,000 kg Max. load capacity of the upper plate: 1,200 kg Swivel angle: 360° Table data Table dimensions: 980 x 750 mm Passage: 1,090 x 920 mm MACHINE DETAILS Machine weight: 3,900 kg Dimensions: 2,200 x 1,900 x 2,300 mm Ibjdpfx Aasvxtikebjc EQUIPMENT Energy storage (impact trigger) Special wax injection unit User-friendly control panel with graphics

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, year of last overhaul: 2015, BOBST AUTOPLATINE SP1420E-600T Iedpfxewc Td Ie Aabebc Rebuilt in 2015 by CELMACCH Italy (including software updates, full sensors calibration, and third side lay instalation etc). Machine in production and can be inspected in Bucharest, Romania. The buyer will take the responsibility for dismantling, packing and loading. Specifications Net weight:25,5 tons. Connected load: 31 kVA. Main motor power: 11 kVA. Production speed: 4500 sheets/ hour. Impressional strenght: 500 tons. Sheet size (min/ max): 1420/700 x 1020/500 mm. Max. cutting size with front and side waste: 1410 x 1005 mm. Max. cutting size without front and side waste: 1420 x 1017mm. Gripper margin adjustable from 10 to 18 mm. Die cutting material: paper, cardboard, corrugated board.

Condition: used, Year of construction: 1980, pressure 40 t table length 670 mm table width 570 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Ibodet Hxczopfx Aabsc

Year of construction: 2019, condition: refurbished (used), machine/vehicle number: DF0137, pressure:120 t table length:600 mm table width:600 mm stroke max.:400 mm dimensions:1070 x 2340 x 2800 mm weight:4,2 t pre-running speed:10 mm/sec :26 mm/sec :200 l Oil cooling (electric):1,5 kW (max) table height:875 mm Working height from to:500 mm diameter of piston:230 mm total power requirement:15 kW pump capacity:24 Lt./sec Pressure power:300 bar :76 mm :650 mm Iodpfx Aeffamtoabsbc capacity of ejector in table:20 t :150 mm Recommended oil:46er

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Iodpjmck Ryjfx Aabjbc Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: good (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: DG-60-B 95174, type of input current: AC, punching force: 400 t, machine base height: 2,400 mm, input voltage: 380 V, input frequency: 50 Hz, Iberica DG-60-B Flatbed Die Cutting Machine Size: (250 x 450) - (860 x 1.140) mm Weight: 19.000 kg Isdpfowwtn Aex Aabobc Power Req.: 380 V / 50 Hz Installed power: 13,5 kW Used space: 9.800 x 3.700 x 2.400 mm Status: mnf. 1995 Machine has stripping station, for clean product pallet delivery Pressing force : 400 tons Working speed : up to 5.000 sheets / hour Cardboard thickness : up to1,5 mm Corrugated cardboard thickness : up to 5 mm Gripper margin 8-15 mm, standard 10 mm Stroke of stamping plate 55 mm, Suitable for cardboard and corrugated cardboard type : E, B, C, EB, EE, BE Machine in printing house, under power, test is possible Located: Europe Eastern Current State: Under power Available: 07-2025

Condition: used, Year of construction: 1985, pressure 200 t table length 1500 mm table width 1200 mm Distance between columns 1250 mm Stroke 1150 mm Ibsdpfxevuul Ee Aabsc Table surface area 1200 x 1500 mm Distance table/ram, stroke up 1475 mm Table height above floor 638 mm Ram surface 1200 x 1500 mm Weight 16,0 t Dimensions (WxDxH) 2,2 x 4,52 x 4,6 m with pivoting ram, moving and tiltable table, ejector in table, ram interlocking via toothed bar, injection unit in ram

Condition: used, Buchdrucktiegel - Stanztiegel / Letter Press Tiegel - DIE Cutter Heidelberg OHT Year 1983 - Serial-No. 194543 Size min.: 40 x 70mm - max. 260 x 380mm Speed min.: 2.200 sph - max. 5.500 sph Standard chase: 260 x 340mm Skeleton chase: 260 x 350mm Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Iedsv Hw Hiepfx Aabobc Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 1985, Make: Reis Type: TUS 160 OK 100 Year of manufacture: 1985 Control: Conventional Country of origin: Germany Delivery time: approx. 4 weeks Freight basis: ex stock Technical details Pressure 100 T column passage 1620 mm Table + ram 1800 x 1550 mm Open height 1800 mm Swivelling table load 6000 kg Table load top (without swivelling) 10.000 kg Ibsdpsgv Ikhofx Aaboc Table load bottom 20.000 kg Stroke 1500 mm Machine weight approx. (without operating materials) 22 T Dimensions L x W x H 5642x2940x5840 column diameter 180 mm Oil tank 400 L Additional information: Ejector in table

Condition: used, Double column hydraulic press SMG type HBP 200 - 2000 / 2000 make no. 7.4117 year of construction 1986 - rebuild 2000 pressure force 200 ton. Stand passage front 2050 mm column passage sideways 2030 mm table area 2800 x 2000 mm ram area 2000 x 2000 mm ram stroke 700 mm installation height max. 1850 mm Table height above floor 750 mm ram retraction force 33 ton. Rapid feed speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety distance 230 mm Motor power main motor 75 kW Motor power control pump 11 kW Mains connection 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots at the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking at TDC - Measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS SPS S7 - adjacent switch cabinet - 2-hand control panel adjacent - ground level installation - central lubrication - Operating instructions with circuit diagrams Space requirement of the press standing L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space requirement for horizontal transport L x W x H 5900 x 3250 x 2950 mm weight 38 ton. Ibedpfx Ajdzp Tcoabec The machine was used as a production press at Volkswagen until 2000. From 2000 the machine was used as a tool testing press in a tool shop. good condition

Condition: excellent (used), Year of construction: 2001, Erba Titan 4 with Zenari automatic feeder and stacking system Year: 2001 Max format: 100 x 140 cm Iedpfxju Dph Do Aabsbc Pneumatic clutch Max speed: 1200 sh/h Automaticc feeder and unloading Zenari (2002) Stacking system In production Available immediately.

Condition: used, Buchdrucktiegel - Stanztiegel / Letter Press Tiegel - DIE Cutter Heidelberg OHT Year 1969 - Serial-No. 171075 N Size min.: 40 x 70mm - max. 260 x 380mm Speed min.: 2.200 sph - max. 5.500 sph Standard chase: 260 x 340mm Skeleton chase: 260 x 350mm Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Ibodpev E Niajfx Aaboc On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, One-piece prism block for press brake Bending tool for press brake Reversible prism with 6 different prisms Isdpfx Aaowbvmcobebc Prism sizes: 30 mm with 3 mm radius for 90°, 40 mm with 4.5 mm radius for 90°, 50 mm with 4 mm radius for 90°, 18 mm for 90°, 10 mm for 90°, 12 mm for 45° Dimensions: 90 x 88 mm Prism length: 3000 mm Weight: 147 kg Good condition

Condition: used, Buchdruckzylinder / Letter Press Cylinder DIE Cutter Heidelberg S Year 1958 - Serial-No. 12218 Size max.: 540 x 720mm Speed min. max. 4.000 sph Punching pressure: 60T Weight approx. 5.000kg3 Mit Druckwerk / With Ink Unit Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by Skype-Video Isdpfxetzc Spe Aabobc We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Iedpfx Aaohmmfkjbjbc Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition