Used Doosan Dl 200 for sale (311)

Condition: refurbished (used), Year of construction: 2006, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rapid traverse Z-axis: 32,000 m/min, controller manufacturer: FANUC, controller model: Series 0i-MC, spindle speed (max.): 12,000 rpm, spindle motor power: 18 W, BRAND: DOOSAN-DAEWOO MODEL: MYNX NM-510 CATEGORY: VERTICAL MACHINING CENTERS YEAR OF MANUFACTURE: 2006 CNC CONTROL: FANUC Series 0i-MC MACHINE WEIGHT: 7,500 kg MACHINE DIMENSIONS: - Length: 4,165 mm - Width: 2,600 mm - Height: 3,043 mm Spindle Spindle taper: ISO 40 Spindle speed: 12,000 rpm Spindle motor power (cont./30 min): 15 / 18.5 kW Working Capacity X axis: 1,020 mm Y axis: 510 mm Z axis: 625 mm Distance spindle nose – table surface: 150 – 775 mm Distance spindle center – column: 557 mm Table Table dimensions: 1,200 x 500 mm Table load capacity: 800 kg Feed Rates Rapid traverse (X/Y/Z axes): 36,000 / 36,000 / 32,000 mm/min Cutting feed rate (X/Y/Z axes, linear interpolation, max): 8,000 mm/min Tool Changer Tool holder taper: DIN 69871-A40 Shank: DIN 69872-A40 Tool magazine capacity: 30 stations Djdpfx Ajxxlmwsddjla Maximum tool diameter (adjacent tools full/empty): Ø 90 / Ø 150 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Accessories Coolant tray + high pressure pump (15 bar) with through-spindle coolant Chip conveyor Spindle line air conditioner + transformer Manuals, electrical diagrams, and CE Declaration

Condition: used, functionality: fully functional, machine/vehicle number: 0759, Year of construction: 2020, operating hours: 1,000 h, load capacity: 2,000 kg, lifting height: 5,000 mm, fuel type: diesel, mast type: triplex, drive type: Diesel, Diesel forklift Chassis number: 0759 Load centre: 500 mm Dljdpfx Aexym S Roddja ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Good Front tyre type: Superelastic Front tyre condition: 80 - 100% Rear tyre type: Superelastic Rear tyre condition: 80 - 100% Sideshift, 3rd valve, 4th valve, rear work lights, front work lights, heater, load guard, full cab, CE certificate, safety light,

Condition: used, machine/vehicle number: FBA17-1390-00445, Year of construction: 2018, operating hours: 2,790 h, lifting height: 4,730 mm, free lift: 1,600 mm, fuel type: electric, battery manufacturer: Midac, battery capacity: 620 Ah, battery voltage: 80 V, fork length: 1,200 mm, Empty weight: 4.790 kg Battery: 620 Ah, 80 V, Year of manufacture 2018, Brand of battery Midac Dodpfx Adsuballodjla Lifting capacity: 2.500 kg Maximum passing height: 220 cm Please contact Johanny Hendrikse for more information

Year of construction: 2007, condition: ready for operation (used), - USED - 4-AXIS CNC LATHE MAX ROTATING DIAMETER: 550 mm MAX TURNING LENGTH: 513 mm MAX TURNING DIAMETER: 300 mm BAR CAPACITY: 65 mm SPINDLE: 4500 rpm; 15-18,5 kW; ASA A2-6 COUNTER SPINDLE: 6000 rpm; 5,5 kW X-AXIS TRAVEL: 205 mm Z-AXIS TRAVEL: 580 mm RAPID FEEDS X-Z: 24 - 30 m/min DRIVEN TURRET HEAD: 12 POS; 5000 rpm; 3,7 kW CONTROL UNIT: FANUC 18i-TB WEIGHT: 4240 Kg OVERALL DIMENSIONS: 3315 x 1600 x 1750 mm Dledpexburuofx Addsa ACCESSORIES: PARTS CATCHER ; SWARF CONVEYOR ; PIECE CONVEYOR ; TOOL SETTER

Condition: used, DOOSAN S390L CNC LATHE MAKE DOOSAN, MADE IN KOREA MODEL S 390L, YEAR 2000 CONTROL FANUC 21T Dlsdpjxfa Ipjfx Addea SWING OVER BED 580 mm MAX TURNING DIA 390 mm DISTANCE BETWEEN CENTRES 800 mm CHUCK DIA 300 mm SPINDLE BORE 89 mm SPINDLE NOSE A1-8 SPINDLE SPEED 3500 RPM SPINDLE MOTOR 30 HP TURRET 12 STATIONS, RAPIDS X: 24m/min Z: 30m/min TAILSTOCK YES MACHINE DIMS L: 2800 mm W: 1880 mm H: 1800 mm MACHINE WEIGHT 5000 KGS PLUS TOOL SETTING PROBE COOLANT SYSTEM TURRET TOOLING

Condition: used, Year of construction: 2007, operating hours: 21,000 h, functionality: fully functional, spindle speed (min.): 60 rpm, spindle speed (max.): 6,000 rpm, position of the milling head: Horizontal, feed length X-axis: 2,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 1,250 mm, workpiece weight (max.): 2,000 kg, total height: 1,250 mm, Table size 1000x1000 mm 1 Degree pisition Max. 2000 kg loading Fanuc 18iMB Dsdpsxvtxcsfx Addsla ATC 90 pieces Iso 50 CTS 20 bar

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 24,000 m/min, rapid traverse Y-axis: 24,000 m/min, rapid traverse Z-axis: 20,000 m/min, controller manufacturer: FANUC, controller model: Series 21i-MB, table load: 1,000 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 15 W, BRAND: DAEWOO MODEL: MYNX 650 CATEGORY: VERTICAL MACHINING CENTRES YEAR OF MANUFACTURE: 08/2004 CNC CONTROL: FANUC SERIES 21i-MB MACHINE WEIGHT: 6,500 kg MACHINE DIMENSIONS: Length: 4,110 mm / Width: 3,190 mm / Height: 3,100 mm Spindle: Spindle taper: ISO 40 Spindle speed: 8,000 rpm Spindle motor power (cont./30 min): 11/15 kW Working Capacity: X-axis: 1,300 mm Y-axis: 650 mm Z-axis: 625 mm Distance spindle centre–table top: 75 / 775 mm Distance spindle nose–table centre: 150 / 775 mm Table: Table size: 1,400 x 650 mm Table load capacity: 1,000 kg Feed Rates: Rapid traverse X / Y axes: 24,000 mm/min Rapid traverse Z axis: 20,000 mm/min Cutting feedrate X/Y/Z axes (linear interpolation): max. 8,000 mm/min Tool Changer: Tool taper: DIN 69871-A40 Shank: DIN 69872-A40 Tool magazine capacity: 30 stations Max. adjacent tool diameter: Ø 90 mm Max. alternate tool diameter: Ø 150 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Other: Manuals, electrical diagrams, and CE Declaration Chip conveyor, coolant tank (300 L) Automatic high-pressure cooling system through the spindle line at 20 bar Transformer MACHINE OVERHAULS PERFORMED: - New Y-axis ball screw, including bearing replacement - X-axis ball screw overhauled, including bearing replacement - Complete overhaul of anti-friction material (Turcite B) on X and Y axes Dlsdpfjxxlifox Addoa - Complete spindle line overhaul with belt, seal, and bearing replacement - Complete replacement of X and Y axis lubrication system - Complete internal repainting and Lexan replacement - Full overhaul of telescopic covers on X/Y/Z axes

Condition: used, Year of construction: 2021, Technical details: rated capacity: 220 kVA Number of working hours: 0 h type of fuel: Diesel revolutions per minute of the motor:: 1500 rpm output voltage: 400 / 50 Hz V weight of the machine ca.: 2,2 t dimensions L x W x H: 3,3 x 1,2 x 2,24 m Djdju U E Edspfx Addela The generator is soundproofed. - NEW -New Diesel engine: -6-cylinder -type P086TI -with battery 2x 12Volt 90 Ah Generator: -alternating current -400Volt / 50Hz -current 318 A -speed 1500 rpm -protection class IP23 -Isolation class H *

Condition: used, Year of construction: 2013, Doosan Puma 480 Turning Centre with Fanuc Series 32i - Model A CNC Control, 600mm Diameter Powered 3 Jaw Chuck, 10 Position Tool Turret, Tailstock, LNS Swarf Conveyor, Filtermist FX6002 Oil Mist Filter Extractor, Machine Weight 10100kg. S/No. ML0144-000404 (2013) Includes Various Tool Holders and Sleeves in Tool Turret and Boxes Location: These lots are located in Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Dodjxztl Hjpfx Addjla

Condition: used, power: 41 kW (55.74 HP), color: orange, Year of construction: 2010, operating hours: 4,750 h, Year of manufacture: 2010 Drive: Wheel Dledpfx Aow Afrdjddea Empty weight: 5.550 kg Dimensions (LxBxH): 612 x 229 x 286 cm

Condition: used, Vertical machining center Daewoo (Doosan) ACE VC500 The machine can be seen working in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy Vertical machining center - 2-pallet Daewoo ACE VC500 CNC Model Fanuc CNC version 18-M Spindle Taper toolholders iso 40 Power spindle 15 Kw RPM 10000 Number of tools 30 X-axis travel 760 mm Y-axis travel 510 mm Z-axis travel 570 mm Changer pallet yes Pallet dimensions 860x560 mm Maximum load allowed 300 Kg Swing type pallet yes High coolant pressure yes Cheap conveyor yes Brand Daewoo Model ACE VC500 Dlodpfstzgaqsx Addja Construction year 2000 DIMENSIONS AND WEIGHT Length 3600 mm Width 3700 mm Height 2935 mm Weight 9200 Kg The machining center is a machine tool equipped with numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with multiple axes of motion and a automatic tool exchange system and sometimes multiple pallets CNC type: FANUC 18-M Number of pallets: 2

Condition: used, Year of construction: 2017, Doosan Puma GT3100M year 2017 Year of manufacture: 2017 Control: Fanuc 0i-TF Turning diameter: 376 mm Dledpfxoxggkts Addea Turning length: 1245 mm Main spindle: Belt-driven spindle Maximum spindle speed: 2800 rpm Maximum power: 22 kW Maximum torque: 1124 Nm Bar capacity: 102 mm 3-jaw chuck, Schunk ROTA THW plus 315-104 12-station turret BMT65 turret head Travel in X/Z axes: 260/1350 mm

Condition: refurbished (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rapid traverse Z-axis: 30,000 m/min, controller manufacturer: HEIDENHAIN iTNC-530, controller model: iTNC-530, spindle speed (max.): 10,000 rpm, spindle motor power: 22 W, BRAND: DOOSAN MODEL: VM-640 Dledpfexxlfyjx Addea CATEGORY: VERTICAL MACHINING CENTERS YEAR OF MANUFACTURE: 11/2010 CNC CONTROL: HEIDENHAIN ITNC-530 MACHINE WEIGHT: 9,000 kg MACHINE DIMENSIONS: Length: 4,200 mm; Depth: 2,800 mm; Height: 2,900 mm Spindle Taper size: ISO-40 Spindle speed: 12,000 rpm Spindle motor power (cont./30 min.): 18.5/22 kW Working Capacity X axis: 1,300 mm Y axis: 650 mm Z axis: 625 mm Distance spindle nose – table surface: 150 ÷ 775 mm Table Table dimensions: 1,400 x 650 mm Maximum table load: 1,000 kg Feed Rates Rapid traverse (X / Y axes): 36,000 mm/min Rapid traverse (Z axis): 30,000 mm/min Working feedrates (X / Y / Z axes): 1 ÷ 15,000 mm/min Tool Changer Tool taper: DIN 69871 – A40 Shank: DIN 69872 – A40 Tool magazine capacity: 30 stations Max. tool diameter (adjacent stations full/empty): Ø 90 / Ø 150 mm Max. tool width: 300 mm Max. tool weight: 8 kg Other Equipment Chip conveyor Coolant tank with wash pumps High-pressure coolant pump through spindle Spindle line air conditioning unit Transformer Manuals, Electrical Schematics, and CE Declaration The following maintenance has been performed on the machine: - X axis ballscrew overhauled and bearings replaced - Geometry recovered with hand-scraping of Turcite on X/Y axes - Complete internal repaint and Lexan replacement - Complete overhaul of X/Y/Z axis telescopic covers - Lubrication system overhauled

Condition: excellent (used), Year of construction: 2020, operating hours: 8,977 h, functionality: fully functional, machine/vehicle number: MM0008-000192, turning length: 1,020 mm, turning diameter: 540 mm, spindle motor power: 22 W, spindle speed (max.): 5,000 rpm, spindle bore: 76 mm, travel distance X-axis: 565 mm, travel distance Y-axis: 170 mm, travel distance Z-axis: 1,050 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 26 m/min, rapid traverse Z-axis: 36 m/min, rotational speed (max.): 12,000 rpm, type of input current: three-phase, bar passage: 76 mm, total height: 2,805 mm, total length: 4,850 mm, chuck outer diameter: 210 mm, total width: 2,525 mm, bar diameter (max.): 65 mm, swing diameter over cross slide: 270 mm, spindle nose: A2#6, swing diameter over bed slide: 750 mm, overall weight: 12,000 kg, swing diameter over top slide: 540 mm, spindle diameter: 110 mm, Equipment: documentation/manual, Mastercam DOOSAN PUMA MX2100ST Machine Environment Additional Mastercam Mill 3D license available for an extra price Dsdpfx Adoxr Utmodela Owner sells FANUC 31i-B control 9-axis DOOSAN MX2100ST turn-mill centre was manufactured in 2020, featuring a swing over bed of 750 mm and a maximum working length of 1020 mm. It supports a bar working diameter of 65 mm and includes comprehensive Y, A, C1, C2, and B axis movements for versatile machining capabilities. Has milling spindle with Capto C6 taper, 18.5 kW and 12 000 RPM and 40 tool swing arm tool changer. A report on the maintenance and technical condition of the equipment can be received from the local dealer upon request.

Condition: used, Year of construction: 2006, Doosan Puma 700L Turning Centre with Fanuc Series 21i-TB CNC Control, 600mm Diameter Powered 3 Jaw Chuck, Approx. 3000mm Between Centres, 10 Position Tool Turret, Tailstock, Machine Weight 21500kg. S/No. P60L0377 (2006) Includes Various Tool Holders and Sleeves in Tool Turret and Boxes Dlodpsxzq Ufsfx Addja Location: These lots are located in Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 530 h, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 1,400 mm, fuel type: diesel, mast type: triplex, construction height: 2,145 mm, power: 42 kW (57.10 HP), fork carriage width: 1,190 mm, fork length: 1,200 mm, empty load weight: 4,850 kg, drive type: Diesel, Diesel forklift Load center: 500 mm Dodjukxcvepfx Addela ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Torque converter Speed class: 20 Technical condition: very good Front tires type: Superelastic Front tires condition: 80 - 100% Rear tires type: Superelastic Rear tires condition: 80 - 100% Sideshift, 3rd valve, 4th valve, half-cabin, full free lift, twin tires,

Condition: used, machine/vehicle number: FDB04-1240-02249, Year of construction: 2013, operating hours: 13,937 h, lifting height: 4,000 mm, fuel type: diesel, mast type: duplex, fork length: 1,200 mm, Empty weight: 7.436 kg Lifting capacity: 5.000 kg Dledpfsrh Eb Ejx Addsa CE mark: yes Latest inspection: 2024-01-10 Please contact Johanny Hendrikse for more information

Condition: used, color: red, lifting height: 4,650 mm, Year of construction: 2015, operating hours: 8,210 h, Year of manufacture: 2015 Empty weight: 8.500 kg Carrying capacity: 230 kg GVW: 8.730 kg Digging depth: 4.175 m Dljdpfx Aettzuveddja

Condition: used, Year of construction: 2016, operating hours: 9,085 h, Hydraulic S. W. system from 2018, Rototilt R8 suitable for units from 28,000 to 32,000 kg, grab and hammer function, boom approx. 3,000 mm, air conditioning, surcharge for trenching bucket. Vehicle may have advertising stickers and/or lettering applied. Dljdpfxjvy Ride Addea Price without Rototilt and without bucket!! Our offer generally does not include a new roadworthiness inspection (TÜV). If a new TÜV inspection is required, we will be happy to provide you with an offer from our partner workshops! Vehicle may have advertising stickers and/or lettering applied. Our general delivery and payment conditions apply. We are happy to provide a financing or leasing offer for this item. Please contact us!

Condition: used, functionality: fully functional, machine/vehicle number: 2506, Year of construction: 2020, operating hours: 271 h, load capacity: 1,250 kg, lifting height: 3,300 mm, fuel type: electric, mast type: telescopic, construction height: 2,005 mm, fork length: 1,200 mm, drive type: Elektro, High-lift truck Chassis number: 2506 Load centre: 600 Mast type: Telescopic Condition: Ready for operation and fully functional Technical condition: good Front tyre type: Superelastic Rear tyre type: Superelastic Battery voltage: 24V Battery type: PzS Dlsdpfexwgc Dox Addsa Battery year of manufacture: 2020

Condition: used, Year of construction: 2007, turning diameter 300 mm turning length 600 mm control FANUC, 18i-TB turning diameter over bed slide 230 mm travel x1 165 mm travel z1 700 mm travel x2 190 mm travel z2 720 mm Dledpfxsxn Amte Addja travel -y axis +/- 50 mm main spindle bore 76 mm main spindle speed 5.000 U/min main spindle drive 22 kW max. torque on the spindle 208 Nm sub spindle bore 76 mm sub spindle speed 5.000 U/min sub spindle drive 22 kW max. torque on the spindle 208 Nm tool turret 2 x 12 Stat. number of driven tool stations 2 x 12 speed of driven tools 5.000 U/min max. torque 47 Nm work piece power 5,5 kW C-axis resolution 0,001 ° rapid traverse x + z axis 20 / 40 m/min rapid traverse y-axis 7,5 m/min total power requirement 68,4 kVA weight of the machine ca. 7,8 t Accessories: collet fixture on main spindle, hydr. 3-jaw chuck make KITAGAWA, BB 208, 210 mmø, on sub spindle, various tool holders for turret, bar loader make HYDRAFEED, model MULTIFEED MX-1B for bar dia. 3 - 80 mm and bar length up to 1650 mm, chip conveyor, coolant with belt filter device

Condition: excellent (used), Year of construction: 2013, Doosan Puma MX2600ST Fanuc 31i-A with Manual Guide i Swing over bed: Ø 1000 mm Max turning diameter: Ø 760 mm Max part length: 1540 mm Bar capacity: Ø 76 mm Movement: X1: 630mm Z1: 1585 mm Y: 230 mm (± 115 mm) X2: 220mm Z2: 1515 mm A: 1550 mm Left/right spindle: Spindle speed: 4000 rpm Spindle nose: A2-8 Spindle power: 22/26 kW C-axis: 360° (0.001) Milling spindle: 12,000 rpm Spindle power: 15/18.5/22 kW Spindle taper: Capto C6 B-axis: 0.001° Lower turret: 12 stations, 4000 rpm, BMT65P Tool magazine: 40 positions Automatic tool measurement Swarf conveyor Coolant for driven tools Coolant through milling spindle 1.5 KW , 2.0 MPA , 21.6 l/min Coolant pump for lower turret 2.2 KW , 1.0 MPA , 30 l/min Cutting force monitoring Dsdpfov Hyf Uex Addjla

Condition: excellent (used), machine/vehicle number: FBA12-2470-00531, Year of construction: 2017, operating hours: 5,070 h, lifting height: 4,750 mm, free lift: 2,100 mm, fuel type: electric, mast type: triplex, battery manufacturer: tab, battery capacity: 690 Ah, battery voltage: 48 V, fork length: 1,200 mm, Weights Empty weight: 3.554 kg Battery Battery: 690 Ah, 48 V, Year of manufacture 2017, Brand of battery tab Functional Lifting capacity: 1.800 kg Maximum passing height: 210 cm CE mark: yes Dsdpfx Adsr Eqivjdjla Condition Technical condition: very good Visual appearance: very good Other information Tyre brand: non marking Fork carriage: Sideshifter Latest inspection: 2024-04-08 Additional information Please contact Johanny Hendrikse for more information

Condition: used, Year of construction: 2014, operating hours: 9,395 h, * Doosan DX 180 LC-3 tracked excavator * Year: 2014 * Operating hours: 9,395 h Djdpsxvhc Nefx Addola * ??Dozer blade?? * Air conditioning * Weight: 18,040 kg * 1 x Verachtert quick coupler * More photos and videos available via Whatsapp * Information supplied without guarantee; subject to prior sale.

Condition: used, Year of construction: 2017, operating hours: 24,500 h, Serial number: DIN0DA30LH074xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21134 Specifications: 2017 model Approx. 6870 hours Approx. 24,500 km Power: 270 kW (375 hp) Tires (see photos) Road registered (white plates) High tailgate Central lubrication Dsdpfow Ruyxox Addsla Length: 955 cm Width: 299 cm Wheelbase: 411 / 177 cm Curb weight: 24,300 kg Max payload: 27,125 kg 6x6 Reversing camera LED work lights Radio/CD Air conditioning Description: 2017 Doosan DA30 articulated dump truck for sale.Equipped with central lubrication, high tailgate, and reversing camera.Ready for quick delivery. Hours: 24500 Own weight: 24300 Model: DA 30 Dumper