Used Doosan Dl 200 for sale (314)

Condition: used, Year of construction: 2021, Technical details: rated capacity: 220 kVA Number of working hours: 0 h type of fuel: Diesel revolutions per minute of the motor:: 1500 rpm output voltage: 400 / 50 Hz V weight of the machine ca.: 2,2 t dimensions L x W x H: 3,3 x 1,2 x 2,24 m The generator is soundproofed. - NEW -New Diesel engine: -6-cylinder -type P086TI -with battery 2x 12Volt 90 Ah Nkodpfxju U E Edo Adwst Generator: -alternating current -400Volt / 50Hz -current 318 A -speed 1500 rpm -protection class IP23 -Isolation class H *

Condition: used, Year of construction: 2020, DOOSAN LYNX 2100LYA Year: 2020 FANUC touch control Specification: Njdsx Id D Ajpfx Adwekt Max spindle speed: 6000 rpm Max turning length: 510 mm Max bar diameter: 51 mm Max turning diameter: 300 mm Y-axis: 105 (±52.5) C-axis: 360° Turret: BMT45P 24 positions - Programmable tailstock - Tool probe - LNS chip conveyor - Driven tool holders: 4 pcs (2/2) - Standard tool holders: 6 pcs Operating hours: 3177 hours

Condition: excellent (used), Year of construction: 2020, Swing over bed 720mm, Swing over cross-slide 590mm, maximum machining diameter 481mm, maximum machining length 1275mm, bar capacity 102 mm, Nksdpfjx Uy Haex Adwet 12 station turret, spindle speed 2,800 rpm, Fanuc I series control, tool setter, swarf conveyor, 3 jaw chuck,

Condition: excellent (used), Year of construction: 2020, operating hours: 8,977 h, functionality: fully functional, machine/vehicle number: MM0008-000192, turning length: 1,020 mm, turning diameter: 540 mm, spindle motor power: 22 W, spindle speed (max.): 5,000 rpm, spindle bore: 76 mm, travel distance X-axis: 565 mm, travel distance Y-axis: 170 mm, travel distance Z-axis: 1,050 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 26 m/min, rapid traverse Z-axis: 36 m/min, rotational speed (max.): 12,000 rpm, type of input current: three-phase, bar passage: 76 mm, total height: 2,805 mm, total length: 4,850 mm, chuck outer diameter: 210 mm, total width: 2,525 mm, bar diameter (max.): 65 mm, swing diameter over cross slide: 270 mm, spindle nose: A2#6, swing diameter over bed slide: 750 mm, overall weight: 12,000 kg, swing diameter over top slide: 540 mm, spindle diameter: 110 mm, Equipment: documentation/manual, Mastercam DOOSAN PUMA MX2100ST Machine Environment Additional Mastercam Mill 3D license available for an extra price Nsdpfx Adexr Utmowokt Owner sells FANUC 31i-B control 9-axis DOOSAN MX2100ST turn-mill centre was manufactured in 2020, featuring a swing over bed of 750 mm and a maximum working length of 1020 mm. It supports a bar working diameter of 65 mm and includes comprehensive Y, A, C1, C2, and B axis movements for versatile machining capabilities. Has milling spindle with Capto C6 taper, 18.5 kW and 12 000 RPM and 40 tool swing arm tool changer. A report on the maintenance and technical condition of the equipment can be received from the local dealer upon request.

Condition: excellent (used), Year of construction: 2012, Maximum turning diameter 406mm, Njdpsx T Dhlsfx Adwjkt Maximum turning length 520mm, bar capacity 65mm, Y axis -/+ 51mm, Spindle speed, 4,500 rpm, sub-spindle speed 4,500 rpm, milling speed 5,000rpm, 12 station turret, 18.5 kw main motor, C axis 0.001degrees, Fanuc I series control, parts catcher, tool setter, swarf conveyor, 3 jaw chucks to main and sub spindles, Iemca magazine barfeed

Condition: excellent (used), power: 210 kW (285.52 HP), Year of construction: 2014, operating hours: 13,949 h, Equipment: air conditioning, Empty weight: 34.980 kg Make of engine: DOOSAN CE mark: yes Technical condition: very good Visual appearance: very good Delivery terms: EXW Please contact Nedtrax B.V. for more information DOOSAN DX340LC-3 Year: 2014 Nkedpfxsyc Di Hj Adwst Reading hours: 13949 h Weight:34980 KG 209.6 kw Mono boom Hydraulic Quick Coupler hammer pipe Central greasing Original paint Cameras Airco/klima CE-MARKED In good condition

Condition: used, Year of construction: 2014, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, Doosan HP5100II Horizontal Machining Center Year of manufacture: November 2014 Control: Fanuc 31i Travels: X-axis: 850 mm Y-axis: 700 mm Z-axis: 750 mm B-axis: 0.001° Automatic pallet changer Table: 500x500 mm Spindle max. 14,000 rpm Spindle taper: BT40 Tool magazine for 60 tools Renishaw workpiece measuring probe Nedox Sq Uvjpfx Adwjkt Chip conveyor Through-spindle coolant (IKZ)

Condition: excellent (used), Year of construction: 2016, CNC FANUC 0i - TC Axes X, Y, Z: 1630, 762, 650 Rapid traverse X – 30, Y – 30, Z -24 m/min Table size 1630 x 760 Usable table load of 1300 kg Spindle cone SK40 Spindle speed 12,000 rpm Tool magazine 30 Nkjdpeqzhfxefx Adwst Chip tank Linear guides in all axes (roller guided) Coolant nozzles on the spindle nose Electronic handwheel (transportable) for 3 axes 3 colors signal light Accesories Coolant system with pumps, spindle cooler, handwheel, transformer & 1x set of documentation

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 4,527 h, load capacity: 1,500 kg, lifting height: 5,000 mm, free lift: 1,700 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,860 mm, gearing type: automatic, fork length: 1,200 mm, overall weight: 3,335 kg, empty load weight: 1,500 kg, total height: 2,350 mm, maximum load weight: 1,500 kg, fuel: electricity, Equipment: lighting, pallet forks, sideshift, Lithium-ion battery. Perfect forklift condition We sell forklifts after a full service. Prepared for the end user. We can arrange transport within Europe and around the world. Nksdpfxex S Rbcs Adwst ===== WhatsApp in English WhatsApp auf Deutsch WhatsApp en français WhatsApp in French ===== We are a company specializing in 4-way forklifts, side loaders and counterbalance forklifts. We have qualified professionals with over 20 years of experience in the forklift and construction machinery industry. We have the best mechanics in the forklifts industry in Poland, we have many satisfied customers throughout Europe. We are also a manufacturer of EPAL EUR pallets and are known for our excellent quality and on-time delivery. Before delivery to the customer, we test the equipment and do a full service inspection. All necessary repairs are carried out. The customer receives the forklift ready to work. In Poland, at the customer's request, we can carry out the acceptance of the equipment by the State Office of Technical Inspection. The main mission of our company is to satisfy the customer and solve his logistical problems. We know how to prepare the machine well and make the customer satisfied and recommend us to other customers. We invite you to contact us and make use of our services. You need a forklift supplier? Contact us

Condition: new, fuel type: diesel, color: orange, Year of construction: 2023, operating hours: 8 h, Equipment: air conditioning, Empty weight: 50.800 kg Make of engine: DC13 076A Track width: 60 cm Bucket capacity: 2,72 m³ Emission level: Stage IIIA / Tier III Delivery terms: EXW Transport dimensions (LxWxH): 12,2x3,35x3,8 Production country: KR Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information CE marked - No CE Certificate available Nkedpsx Scfgefx Adwjt

Condition: good (used), power: 213 kW (289.60 HP), fuel type: diesel, color: orange, Year of construction: 2018, operating hours: 6,429 h, Equipment: air conditioning, Technical information Track width: 80 cm AdBlue system: Yes Make of engine: DL08P Nksdpfx Adex Scfaowot Empty weight: 36.200 kg Functional CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: DWGCECEBEH1020055 Other information Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 11,3x3,5x3,4 Production country: KR Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: excellent (used), Year of construction: 2018, operating hours: 8,305 h, functionality: fully functional, Equipment: documentation/manual, Doosan Lynx 2100 A ( 2018.07. ) Model: LYNX 2100A, equipped with Fanuc F0i control Main spindle speed: 5,000 rpm Main spindle motor power: AC 15/11 kW Chuck size on the main spindle: 8” (210 mm) Bar capacity through main spindle: ø 52 mm Max. turning diameter: ø 350 mm Max. turning length: 330 mm Rapid traverse X/Z: 30 m/min Tool profile: 25 x 25 mm (Ø32 mm) Turret positions: 12 (tool change time 0.15 sec) Basic toolholder set, programmable tailstock with live center, oil mist extractor included!! CE Certification, transformer Optional Equipment:  Doosan tool load monitoring system Nodpfxjx Sdyxs Adwokt  Program-controlled tailstock  Bar feeder interface  Workpiece catcher with collecting box  Automatic tool presetter  High-pressure coolant 7 bar (1.1 kW)  Oil separator  Chip conveyor  Electrical noise filter

Condition: good (used), Year of construction: 2014, functionality: fully functional, SYNCROMILL C21-63 OPERATING RANGES Table 1600 mm X 800 mm Travel (X/Y/Z): 700 / 1,000 / 800 mm FEED AXES Speed (X/Y/Z): 75 / 75 / 105 m/min Acceleration (X/Y/Z): 11 / 11 / 17 m/s² MACHINING SPINDLES No. of spindles: 2 Spindle spacing: 700 mm Power S1/100%: 26 kW Torque S1/100%: 60 Nm Power S6/40%: 35 kW Torque S6/40%: 80 Nm Max. speed: 17,500 Rpm TOOL INTERFACE HSK 63 TOOL MAGAZINE Chip-to-chip time (VDI 2852): 2.9 s Tool positions: 56 Tools atc Tool length: 530 mm Weight: 9 kg Diameter with fully occupied magazine: 85 mm Diameter with empty positions: 175 mm CONTROLLER / INSTALLATION Siemens 840D SL A-axis: ±180° B-axis: 360° Cooling Blum Touch Probe Rotary table 350 MM Xtra Spindle for heavy works Input power: 95 kVA Installation dimensions (L/W/H): 4.6 / 3.4 / 3.2 m Weight: 25,000 kg Additional Equipment Included: 1 x Rotary Table for advanced multi-axis machining 1 x Touch Probe for precise measurement and quality control 1 x Extra Spindle (ready-to-install for maximum uptime) Ready For Delivery. Nkodpfx Asvxpuisdwot Increased productivity with two spindles operating simultaneously High flexibility for complex parts and multi-side machining Equipped with additional accessories to maximize machine versatility and reduce downtime

Condition: used, power: 101 kW (137.32 HP), fuel type: diesel, Year of construction: 2016, operating hours: 2,420 h, Drive: Wheel Empty weight: 14.988 kg Make of engine: Doosan Nkjdpsx Azcisfx Adwet Emission level: Stage IIIB / Tier IV interim Transport dimensions (LxWxH): 7,25x2,5x3,6 Rental currency: EUR Please contact KEY-TEC Sales for more information

Condition: good (used), power: 141 kW (191.71 HP), fuel type: diesel, color: orange, Year of construction: 2016, operating hours: 8,621 h, Technical information Track width: 60 cm AdBlue system: Yes Make of engine: DL06P Empty weight: 25.100 kg Nkodpfsx R Rztex Adwjt Functional CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: DHKCEBBWTG0001283 Other information Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 9,6x3x3,6 Production country: KR Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: used, 10" TAILSTOCK; TOOL SETTER; CHIP CONVEYOR Nodpfx Aoya U E Tsdwskt

Condition: used, Chuck 10” Swing over bed Ø630 mm Nkedpfx Adsya U Eajwet Max. turning length 1078 mm Swing over saddle Ø500 mm Max. turning diameter Ø420 mm Spindle speed 3500 rpm Spindle nose A2#8 Spindle bore diameter Ø86 mm Number of turret tool stations 10 Tailstock Ø100 mm / MT#5 Main spindle motor 22 kW Machine weight 5300 kg

Condition: used, Year of construction: 2001, Daewoo Puma V300 CNC Lathe Fanuc 18 – T Vertical lathe Daewoo PUMA V300 Year of installation: 2001 Kitagawa chuck, diameter 305 mm Max. swing diameter over bed: 550 mm Max. turning diameter: 410 mm Max. turning height: 420 mm Spindle speed: 2,500 rpm AC motor power (cont./30 min.): 18.5 kW Turret with 8 tools Nkedpfx Aoyahy Dodwot Drilling diameter: 50 mm Tool section: 25 mm Control: Fanuc Series 18-T Equipped with chip conveyor Complete with documentation

Condition: like new (used), Year of construction: 2019, operating hours: 1,210 h, load capacity: 2,500 kg, lifting height: 4,700 mm, mast type: triplex, front tire type: cushion tires (black), rear tire type: cushion tires (black), forklift 2500 kg diesel Nkodpsycw R Dsfx Adwst

Condition: excellent (used), functionality: fully functional, overall weight: 750 kg, Year of construction: 2016, operating hours: 1,236 h, Equipment: trailer coupling, Compressor 3100 l/min on trailer in very good condition Njdpfx Adjycw Ngswjkt 750 kg

Condition: good (used), Year of construction: 2006, Doosan Puma 280 CNC Slant Bed Lathe With Fanuc Series 21i-TB Control 3 Jaw Power Chuck. Swing Over Bed Ø630mm. Swing Over Saddle Ø500mm. Recommended Turning Ø420mm. Maximum Turning Ø420mm. Maximum Turning Length 658mm. Maximum Bar Capacity Ø76mm. Axis Travel 'X'=242mm, 'Z'=680mm. Rapid Traverse 'X'=20m/min, 'Z'=24m/min. Maximum Spindle Speed 3,500rpm (23kW Motor). 10 Station Turret. turning Tool Shank 25 x 25mm, Boring Bar Ø50mm. Tailstock Quill Taper MT5, Quill Ø100mm, Quill Travel 100mm. S/No.PM2800047 (2006/10). Nsdpfx Adjydmfmswokt With Tool Setting Arm, Parts Catcher, Tailstock & Foot Switches. Weight 4,700kg.

Condition: excellent (used), Year of construction: 2015, Doosan DNM 500 II CNC Vertical Machining Centre With Siemens 828D (Shopmill) Control Nkodpfx Adjydmd Aewst Table Dimension 1,200 x 540mm (4 'T' Slots). Maximum Table Load 800kg. Axis Traverse 'X'=1,020mm, 'Y'=540mm, 'Z'=510mm. Distance From Spindle Nose To Table Surface 200-710mm. Rapid Traverse 'X'=36m/min, 'Y'=36m/min, 'Z'=30m/min. Maximum Spindle Speed 8,000rpm (22kW Motor). Spindle Taper ISO 50. 26 Position ATC. Maximum Tool Ø125mm (Ø220mm Non Adjacent Tools), Maximum Tool Length 350mm, Maximum Tool Weight 15kg. Tool Change Time 2.5sec (Tool To Tool). S/No. MV0010-003030 (2015). With Coolant System, Dual Auger Conveyor & Signal Tower. Overall Dimensions W3,110 x D2,412 x H,3143mm. Weight 6,500kg.

Condition: used, Year of construction: 2016, Doosan HM1250 Twin Pallet Horizontal Machining Centre with Fanuc Series 31i - Model B CNC Control, Travels X Axis 2100mm, Y Axis 1500mm, Z Axis 1500mm, Pallet Size 1250mm x 1250mm, CAT50 Spindle Taper, 60 Tool ATC, Renishaw Probe, Hydtec Hipreco KHS-375 High Pressure Coolant Filter Unit, Spindle Chiller, Machine Weight 31,000kg. S/No. MH0014 - 000201 (2016) - CE Mark Nkjdpsx Trmcsfx Adwet Please Note: These lots are located in Ferrara, Italy. All/Any tooling is being offered as specifically described.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 2,117 h, - USED - 3-AXIS VERTICAL MACHINING CENTRE   Nkodpfxow Dkfle Adwst X-AXIS TRAVEL: 1300 mm Y-AXIS TRAVEL: 670 mm Z-AXIS TRAVEL: 625 mm DISTANCE SPINDLE NOSE-TABLE: 150-775 mm RAPID FEEDS X-Y-Z: 36 - 36 - 30 m/min SPINDLE: 12000 rpm; 11-18,5 kW; 117,8 Nm; ISO 40 - DIN TABLE SIZE: 1500 x 670 mm MAX ADMITTED LOAD: 1300 Kg TOOL MAGAZINE: BASKET-TYPE ; 30 POS MAX TOOL DIAMETER: 76 (125) mm MAX TOOL LENGHT: 300 mm MAX TOOL WEIGHT: 8 Kg CONTROL UNIT: FANUC i Series Plus WEIGHT: 8500 Kg OVERALL DIMENSIONS: 2600 x 3350 x 3120 mm ACCESSORIES: HIGH PRESSURE COOLANT ; SWARF CONVEYOR ; PCMCIA SERIAL PORT ; USB PORT ; PORTABLE HANDWHEEL NOTE: 4TH-AXIS PRE-SET

Year of construction: 2014, operating hours: 25,000 h, condition: ready for operation (used), General Data Machine weight 3900 kg Control Unit Brand FANUC Model 0i-TD Nksdpfx Adox D I T Rowet Main Drive Number of axis 4 This 4-axis DOOSAN LYNX220LSYA horizontal turning machine was manufactured in 2014. It offers robust performance for precision turning operations. If you are looking to get high quality turning capabilities consider the DOOSAN LYNX220LSYA machine we have for sale. Contact us for more information. Application Types Turning