Used Doubel Cluom Milling for sale (9,460)

Condition: used, Year of construction: 1981, Table size: 1200 x 1000 mm Table height: 850 mm Swivel range: -5° to +45° Spindle speeds: 3000/4000/5000/6000/8000/10000 rpm Height adjustment: 120 mm Tool holder: MK5 incl. integral fence Weight: approx. 1000 kg Storage location: Nattheim Lhodpfxsx It Auo Abyjh

Condition: used, Year of construction: 1991, Table size: 1100 x 760 mm Table height: 870 mm Tool holder: MK 5 Spindle speeds: 3000/4500/6000/9000 RPM Vertical travel: 120 mm Table opening for through-feed: 450 mm Lhedpfxox It Ano Abyoh Swiveling range: -5° to +45° Weight: approx. 850 kg Location: Nattheim

Condition: good (used), Year of construction: 2013, Main and counter spindle C-axis on main and counter spindle 2 x 12-position turret VDI 40 Y-axis Chuck flushing device Tool monitoring Brankamp Coolant system 980 liters with belt filter Conveyor belt Oil mist separator Chip conveyor Lhodjy Ivyispfx Abysh without bar feeder

Condition: good (used), Year of construction: 2021, Parts shown by hand not come. Ledpfszgpadox Abyjhh Technical details are shown on picture.

Condition: good (used), Year of construction: 2002, workpiece dia. 40 mm max. module 2 min. module 0,1 workpiece length - max. 665 mm weight 4,5 t spindle bore diameter 82,5 mm Control Siemens total power requirement 5,5 kW Technical data max. module 2 Pitch 0.5 - 25 mm Number of speeds multi-speed / multiple Lhodpfx Absv Ucdveyjh max. workpiece diameter40 mm max. workpiece length180 mm Milling cutter diameter max.80 mm max. milling cutter width12 mm Z-axis (milling length with counter point)90 mm Z-axis (milling length without counter point)113 mm Milling head swivelling angle30° / 30° Description Gear hobbing and thread cutting machine. LAMBERT - 124 CNC The machine is in a well-maintained condition.

Condition: new, Year of construction: 2024, Universal milling and drilling machine Kunzmann WF 610 M with Heidenhain TNC 128 control system Paths X/Y/Z = 610/400/450 mm Ljdpfx Abeuf Sv Doyohh Speed 1-4500 rpm Power 8.5 kW at 100 % ED Spindle SK40 DIN 69871 (form AD) with tightening bolt DIN 69872 Fixed angle table 800x 425 mm 6 x 14 H7 T-slots coolant device 66 liters electric handwheel HEIDENHAIN HR 510 FS Further technical data is available on request. The machine is located at our premises in 71334 Waiblingen-Beinstein, is immediately available and can also be inspected. Please register in advance.

Condition: good (used), tool holder, milling holder, milling tool, long milling mandrel, attachment holder -Milling holder: SK40 holder Lhsdpfx Abevmxcreyeh -Type: SK40 x 32 x 510 -Shaft: Ø 32 mm -Dimensions: Ø 75 x 670 mm -Weight: 7,4 kg

Condition: excellent (used), CATALOG NUMBER: 6607 TECHNICAL DATA Circular saw: - Maximum blade diameter: 350mm - Spindle: 30mm - Lockable spindle - Blade adjustable front/back, up/down - Blade guard - Motor: 1.1kW - Extraction port diameter: 80mm Spindle moulder: Tenoning spindle: - Spindle diameter: 40mm - Spindle working height: 140mm - Lockable spindle - Maximum cutter head diameter: 350mm - 2 spindle speeds: 3000 / 4500 rpm - Motor: 5.5kW - Brake Lhedozc I Tpepfx Abyjh - Side sliding table – manual feed - Table dimensions (L/W): 1180x600mm - Mitre fence - 2 pneumatic clamps - Extraction port diameter: 120mm - Overall dimensions (L/W/H): 2600 (for shipment 2000) /1600/1450mm - Weight: 735kg – Very good condition – Used tenoning machine Net price: 13,900 PLN Net price: 3,300 euros depending on exchange rate 4.2 euro (Prices may vary in case of significant fluctuations)

Condition: good (used), Year of construction: 1999, - Control system: Heidenhain CNC Pilot 3190/4290 - Turn-Plus software update - Turning diameter: 500 mm - Turning length: max. 635 mm - Spindle speed: 25-5000 rpm Ledozggahepfx Abyohh - 12-station turret, no driven tools - Tool holder VDI 30 - Tailstock - Chip conveyor

Condition: excellent (used), CATALOG NUMBER: 6969 TECHNICAL DATA Circular saw: - Max saw blade diameter: 300mm - Spindle: 30mm - Max cutting height: 60mm - Saw blade adjustable front/back - Motor: 2.4kW Milling machine: Tenoning spindle: - Spindle diameter: 40mm - Spindle working height: 190mm - Lockable spindle - Max cutter diameter: 360mm - Motor: 7.5kW - 2 spindle speed options - Material hold-down - Adjustable side carriage (up/down, front/back) - Angle stop Lhodpozc Iv Dofx Abyoh - Pull-out table support - Manual carriage feed - Extraction port diameters: 80mm, 160mm - Dimensions (L/W/H): 1910x1960x1800mm, Weight: 830kg – Polish production – DTR (Technical Documentation) included – Upper control panel – Used tenoning machine, in very good condition Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated according to 4.2 PLN/EUR conversion rate (In the event of substantial exchange rate fluctuations, the price may be subject to change)

Condition: good (used), Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology, -Manufacturer: H. Dreher, Side-mounted mill cutting mill -Type: S26/26 -Drive motor: 5.5 kW -Number of cutting blades: 4 pieces -Number of counter blades: 2 pieces -Sieve perforation: Ø 8 mm -Rotor width: 250 mm Lodjzf Ng Uepfx Abyohh -Rotor diameter: 260 mm -Quantity: 1 cutting mill available -Price: per piece -Dimensions: 650/1460/H1880 mm -Weight: 475 kg

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, rotational speed (max.): 12,000 rpm, Technical specifications – Elumatec AS 70/44 1-spindle copy milling machine for aluminum and PVC profiles Lhsdpfxszgglko Abysh Feature Value Machine type 1-spindle copy milling machine Milling range with stop 230 × 90 mm Milling range with copy template 230 × 90 mm Clamping range for profiles 180 × 130 mm Milling stroke 110 mm Mains connection 230/400 V, 3 ~, 50 Hz Motor power 0.74 kW Spindle speed 12,000 rpm Operating pressure 7 bar Air consumption 12 l/cycle without spray device, 24 l/cycle with spray device Dimensions (L × W × H) 720 × 650 × 1,440 mm Weight approx. 120 kg Equipment Versatile for processing aluminum and PVC profiles. Copy milling in a 1:1 ratio using templates or stops. Pneumatic material clamping. Manual feeler pin with three levels for different cutter diameters. Pulse spray device for tool cooling. Simple operation via two control levers. Quick setup and high machining accuracy.

Year of construction: 2003, condition: good (used), Sub-spindle, Y-axis, B-axis SIEMENS 840D Powerline Turning diameter max 200mm Turning length -635mm Swing Diameter -250mm Spindle speeds main & sub-spindle 20-7000 rpm Turret head 1+2: 12 driven positions B-Axis, upper turret head +135/-45° Misc. accessories Lhedpfx Absglf A Hoysh MARCELS MASCHINEN CH

Condition: used, Year of construction: 2012, functionality: fully functional, Milling head debarking, max. 6000 mm length, 35 kW, with mechanization. Lhsdpfxjxpuzrs Abyeh

Condition: used, Year of construction: 2022, turning diameter 420 mm turning length 1350 mm spindle passage 101 mm Lhsdpozfqf Sefx Abyoh control Siemens SL 828D ShopTurn number of controlled axis 4 turning speed range 3000 U/min power requirement 22/18,5 kW rapid speed 30 m/min number of tapers in turret head 12/24 BMT 65 number of driven tools in turret 12 BMT 65 Spindel speed of driven tools 5000 U/min Spindelpower on driven tool 7,5/5,5 kW y-axis +/- 65 mm tail stock MT-5 weight 8,0 t dimensions 5,7 x 2,3 x 2,32 m Heavy CNC- lathe with driven tools and Y- Axis in very good condition. First instalation: 03/2023 Appr. 5400 h Power on. - 2x 3-jaw chuck Ø 325 + 400 mm - some fixed tool holders - Tool pre- setter - chip conveyor - 4x driven tool holders - 2 + 2 driven toolholders with Capto C4 - oildust collector - band filter system with appr. 1000 ltr. - hydr. steady moveable wit turret SMW Autoblock SLU-X3.1 (Ø 20- 165 mm) - 3 colour signal lamp - coolant gun - some jaws - external programming system MCS40501/2 - build in spindle

Year of construction: 1987, condition: used, 13-Stand Rebar / Bar Mill - 100.000 Ton/year New: Shutdown: 2003 Manufacturer: Configuration: 1987, upgrades in the late 1990's, early 2000's Billet: Products: Rebar: Rounds: Square: Hex: Flats: Angles: Controls: Drives: Schloemann, Hille Engineering, ABB, Ajax Semi-continuous, Reversing Roughing Stand plus 12 Continuous Finishing Mill 4" - 5" (102 - 127 mm) .5" - 1.2" (12.7 - 30 mm) .5" - 2.5" (12.7 - 63.5 mm) Lhjdpsyx Exiofx Abyeh .625" - 2" (15.9 - 50.8 mm) .625" - 1.8" (15.9 - 45.7 mm) .25" x 1.5" - 1" x 4" (6.4 x 38.1 - 25.4 x 102 mm) 1" x 1" x .125" - 3" x 3" x .375" (25.4 x 25.4 x 9.5 - 76.2 x 76.2 x 9.5 mm) ABB master reference speed control system for tension free rolling Solid State ABB. Most motors and drives were replaced in 2000. Stand Number Type Roll Diameter Roll Width Motor 1 Horizontal 14.75" 20" 500 HP 2 Horizontal 14.75" 20" 500 HP 3 Horizontal 15.25" 20" 500 HP 4 Vertical 15.25" 20" 350 HP 5 Horizontal 15.25" 20" 500 HP 6 H-V Convertible 13.78" 22" 500 HP 7 H-V Convertible 13.78" 22" 500 HP 8 H-V Convertible 13.78" 22" 500 HP 9 H-V Convertible 13.78" 22" 500 HP 10 H-V Convertible 13.78" 22" 500 HP 11 H-V Convertible 13.78" 22" 500 HP 12 H-V Convertible 13.78" 22" 500 HP Main Components: 1. Billet Reheating Furnace: Ajax 4 zone continuous Induction Furnace: Zone 1: 4,000 kW, 10 coils Zone 2: 3,000 kW, 12 coils Zone 3: 3,000 kW, 12 coils Zone 4: 1,000 kW, 10 coils 2. Schloemann 2 Hi Reversing Roughing Mill: Roll diameter: 26" (660 mm) Roll width: 88.5" (2,248 mm) Motor: 2,000 HP Entry and exit Roller Conveyors 3. 12-Stand Hille Engineering (UK) Continuous Mill: (3) Flying Crop and Dividing Shears Vertical Loopers in the Finishing Train4. Orbis Sizing Gauge 5. Water Quenching Line (used for sizes .75" 4. Orbis Sizing Gauge 5. Water Quenching Line (used for sizes .75" to 2.25") 6. 120' Walking Beam Cooling Bed 7. CMI Product Saw driven by 300 HP DC Motor 8. Finishing Stand Setup Area (stands 6 to 12) 9. Spare rolls, chocks, bearing and other spares The Mills is still installed. The condition of the equipment is very goo

Condition: excellent (used), Year of construction: 1989, x-travel 1500 mm y-travel 1000 mm z-travel 700 mm table: 1500 x 1000 mm Lhsdpju Id N Defx Abyeh control FIDIA weight of the machine ca. 11 t

Condition: good (used), Year of construction: 1982, x-travel 300 mm y-travel 160 mm z-travel 340 mm tool taper SK40 Speed 40-2000 U/min. control Aktiv HEIDENHAIN table-size 600 x 210 mm total power requirement 2 kW weight of the machine ca. 0,73 t dimensions of the machine ca. TBH 1,20x1,10x1,60 m Comes from a vocational school - Powered feed in X, Y, and Z axes Lhedpfozfql Sex Abyjh - Coolant system - Machine vice - Work light

Condition: excellent (used), Catalog number 7382 TECHNICAL DATA Tenoning carriage: - Electric feed with stepless speed adjustment - Carriage adjustable at an angle - Feed motor: 0.46 kW - Table size (L/W): 700x450mm, extendable to 1150mm - Cross fence on carriage – cutting length on extendable telescope: 1860mm - Rotary block in the fence - 2 pneumatic clamps Crosscut saw: - Max blade diameter: 380mm - Max cutting height: 110mm - Blade adjustable up/down, forward/backward, and at an angle - Blade guard - Saw motor: 2.2 kW Tenoning spindle: - Pneumatic spindle stroke - Spindle up/down and stroke adjustment via handwheels - Max tool diameter: 320mm - Spindle diameter: 40mm - Working spindle height: 220mm - Spindle lock - Motor: 7.5 kW Profiling spindle: - Pneumatic spindle stroke - Spindle up/down and stroke adjustment via handwheels - Max tool diameter: 200mm - Working spindle height: 220mm - Spindle diameter: 54mm - Spindle lock Lodpfxezcu Tco Abyshh - Extendable table support - Motor: 7.5 kW Glazing bead saw: - Max blade diameter: 200mm - Blade bore: 30mm - Blade adjustable forward/backward, up/down - Blade guard - Motor: 2.2 kW Feed unit: - Number of rollers: 8 pcs - Motor approx. 0.55 kW - Roller size: 110x50mm - 8 feed speeds: 4, 6, 8, 10, 12, 15, 20, 30 m/min - Extraction port diameters: 60mm, 2x130mm, 110mm, 100mm - Operating pressure: 6-8 bar - Dimensions (L/W/H): 3600x2100x1600mm, weight approx. 2500kg FEATURES – For window production – Pneumatic spindle stroke – Carriage with electric feed – Crosscut saw – Tenoning spindle – Not repainted, used machine, in very good condition Net price: 27,900 PLN Net price: 6,640 EUR (based on the exchange rate of 4.2 PLN/EUR) (Prices may change with significant currency fluctuations)

Condition: used, Year of construction: 2008, functionality: fully functional, Turning / milling center with counter spindle with 10 CNC axes (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Control: FANUC 31:iA Main Spindle Power: 15/11 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Counter Spindle Lhjdpfjzfni Iox Abyeh Power: 11/7,5 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Turning and milling spindle Power: 7,5/3,7 kW Turning and milling spindle speed: 12.000 min-1 max. rotation length turret bottom: 1.005 mm Slide cross X1 / X2 / Z1 / Z2 / B2: 455 / 222,5 /1.090 / 1.005 / 1.008 mm Slide cross Y1 / Y2: +/- 70 / +20, -50 mm Swivel range B1 axis: +/- 95 ° Linear rack magazine incl. support robot CNC support steady rest Coolant cyclone filter system incl. 2 pcs. coolant pumping spindle oil cooler

Condition: used, Year of construction: 2022, functionality: fully functional, ZAFFERANI AZV MILL 1000 – Year 2022 Vertical CNC Drilling/Milling Machine Working area: 200 x 1000 mm Minimum glass dimensions: 500 x 300 mm Maximum glass dimensions: 3400 x 3210 mm Thickness: 3-25 mm Minimum hole diameter: 8.5 mm Power: 8 kW Lhsdpoy Ulvgofx Abyeh IN PERFECT CONDITION

Condition: used, Year of construction: 1978, x-travel 1.000 mm y-travel 340 mm z-travel 450 mm table: 1.300 x 400 mm spindle taper ISO 40 SK Lhedpozf Nrdefx Abysh turning speeds 32 - 1.400 U/min spindle stroke 80 mm total power requirement 7,5 kW Features: - Universal console milling machine with HEIDENHAIN digital display - Mechanical tool clamping - Cooling system - Various SK 40 tool holders - Machine documentation in German

Condition: good (used), Hello, Lhjdpfx Abjxykbisyeh Universal milling machine FY-321 for sale. The machine is fully operational and in continuous use, with the possibility to test on site. The price stated in the advert is net and is subject to VAT. The machine can be inspected in Starachowice, at 13 Kwiatkowskiego Street. Telephone contact available from 7:00 to 16:00.

Condition: good (used), Hello, For sale: Coordinate drilling machine and universal milling machine, type 6T83-1. The machine is fully operational and in continuous use; inspection and testing on site are possible. The price listed in the advertisement is net and is subject to VAT. Lhedpfx Abjxyi Stsyjh The machine can be viewed in Starachowice, Kwiatkowskiego 13. Telephone contact available from 7:00 to 16:00.

Condition: good (used), Hello, Lhedpfxoxyi U Ie Abysh For sale: Vertical milling machine FSS-400/1600. The machine is operational, in continuous use, and available for inspection. The listed price is net; VAT must be added. The machine can be viewed in Starachowice at 13 Kwiatkowskiego Street. Telephone contact available from 7:00 to 16:00.