Used Double Clipper for sale (11,239)

Condition: used, Year of construction: 1966, shaft length 15 - 130 mm wire diameter 6 - 12 mm length of wire blank max. 170 mm capacity/output with closed mould, adjustable 100 /min capacity/output with open mould, adjustable 67 /min Weight 12,5 t dimensions of the machine (WxDxH) 2,3 x 4,0 x 1,6 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work free loaded to truck combined double-pressure cold header press for jaws and closed moulds maximum wire diameter for high tensile bolts und carriage bolts 10 mm maximum wire diameter for mild steel bolts and rivets 12 mm wire diameter range 6 - 12 mm minimum and maximum shaft length 15 - 130 mm Bodpfxov Sva Eo Acnjwp maximum length of wire blank 170 mm capacity/output with closed mould, adjustable - 100 St/min capacity/output with open mould - 67 St/min power requirement 15,0 kW mould dimensions - jaw dimensions 54 x 54 mm

Condition: used, Year of construction: 2012, pressure 260 t distance between columns 360/270 mm stroke 60 mm Stroke rate 50 / min Distance table/ram, max. stroke up, adjustment up 225 mm Table surface area 340 x 380 mm table height over floor 800 mm Bwodovuuk Iopfx Acnep Ram surface 230 x 220 mm Ram adjustment 12 mm Power capacity 4,5 kW Dimensions (WxDxH) 2,0 x 1,55 x 2,6 m Weight 4,5 t overhaul in 2012: new clutch-brake combination new control Siemens S 7 new two-hand and foot operation

Condition: used, Year of construction: 2007, pressure 315 t distance between columns 1750 mm stroke 700 mm distance table/ram, max. stroke up, adjustment up 1200 mm table surface area 1600 x 1500 mm pressure of drawing cushion in table 125 t stroke of drawing cushion in table 200 mm die cushion area 1200 x 1400 mm table height over floor 750 mm ram surface 1640 x 1500 mm power requirement 55,0 + 11,0 kW weight 29,5 t Bwedovuukbopfx Acnop dimensions (WxDxH) 3,2 x 4,5 x 5,8 m Height above floor 5,1 m year of manufacture 1983 - 2007: modernization of electrical control (Siemens S 7) with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic cutting impact cushioning

Condition: used, Year of construction: 1989, pressure 100 t distance between columns 1060 mm stroke 700 mm Bedpfx Ajvuk Najcnswp distance table/ram, max. stroke up, adjustment up 1250 mm table surface area 1000 x 700 mm pressure of drawing cushion in table 40 t stroke of drawing cushion in table 200 mm die cushion area Ø 250 mm table height over floor 950 mm side window 580 x 750 mm ram surface 1000 x 700 mm oil volume 700 l power requirement 47,0 kW weight 13,0 t Dimensions (WxDxH) 2,2 x 1,8 x 5,0 m with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table, ejector in ram, mechanical depth stop (motoric adjustable), ram interlocking (SITEMA)

Condition: used, Year of construction: 1997, pressure 130 t distance between columns 1600 mm Bwedpfx Aovuugcecnep stroke 8 - 140 mm no. of strokes 50 - 200 Hub/min dayligth (stroke and adjustment up) 520 mm column travel -side 610 mm table surface area 1600 x 880 mm hole in the table 1000 x 350 mm table height over floor 950 mm ram surface 1600 x 880 mm power requirement 24,2 kW weight of the machine ca. 28,00 t required space 4,3 x 2,2 x 3,8 m ram adjustment 100 mm with infinitely variable drive, hydraulic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, automatic stroke adjustment, electronic roll feed (Hensel, EVX 500) with hydraulic intermittent lifting 2025 - in progress: new electrical (safety) control - Siemens S7-1500 F, easy operation via touch-panel Video at seller's site before dismantling available

Condition: used, Year of construction: 1980, pressure 100 t stroke 20 - 200 mm no. of strokes 20 - 60 /min distance between columns 1230 mm dayligth (stroke and adjustment up) 650 mm column travel -side 540 mm table surface area 1050 x 750 mm table height over floor 760 mm ram surface 1000 x 750 mm ram adjustment 100 mm power requirement 18,0 kW Weight 20,5 t dimensions of the machine ca. 2,8 x 1,9 x 4,3 mxmxm permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with infinitely variable drive (PIV), pneumatic hydraulic clutch/brake combination (Desch), hydraulic overload protection in ram, semi-automatic stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, motoric circular oil lubrication, two-hand and foot operation as is where is, WITHOUT putting into operation Bjdevuk H Espfx Acnowp

Condition: used, Year of construction: 2010, pressure 315 t distance between columns 1800 mm stroke 400 mm Distance table/ram, max. stroke up, adjustment up 650 mm table surface area 1800 x 1000 mm table height over floor 900 mm die cushion pressure in table 80 t die cushion stroke in table 100 mm Bwjdpfx Acsvuubmsnsp Die cushion area in table 1300 x 600 mm side window 600 mm ram surface 1800 x 1000 mm speed down 400 mm/s speed up 300 mm/s working speed 15 - 80 mm/s oil volume 1700 l power requirement 55,0 kW weight 27,5 t dimensions (WxDxH) 3,1 x 2,2 x 4,6 m year of manufacture 1980 - modernization 2010 with oil-hydraulic drive, hydraulic drawing cushion in table No foundation pit necessary

Condition: used, Year of construction: 1990, pressure 500 t distance between columns 1220 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 1000 mm table surface area 1600 x 1200 mm pressure of drawing cushion in table 320 t stroke of drawing cushion in table 150 mm drawing cushion surface in table 750 x 625 mm pressure of drawing cushion in ram 180 t stroke of drawing cushion in ram 100 mm drawing cushion area in ram 750 x 625 mm ram surface 1600 x 1200 mm table height over floor 800 mm speed down 665 mm/s speed up 530 mm/s working speed 34 - 100 mm/s quantity of oil 2000 l power requirement 180,0 kW weight 40,0 t Dimensions (WxDxH) 3,2 x 2,4 x 7,5 m Depth of foundation pit 4,1 m Height above floor 5,55 m Bwodpfovut Tbox Acnsp YOM 1975 - Overhaul 1990 with oil-hydraulic drive, hydraulic drawing cushion in table and ram

Condition: used, Year of construction: 1979, pressure 160 t distance between columns 1620 mm stroke 600 mm Distance table/ram, stroke up 800 mm table surface area 1600 x 1100 mm table height over floor 750 mm die cushion pressure in table 63 t die cushion stroke in table 180 mm Die cushion area in table 1300 x 750 mm side window 600 mm ram surface 1600 x 1100 mm oil volume 1160 l power requirement 30,0 + 16,0 kW weight 23,6 t dimensions (WxDxH) 2,9 x 2,3 x 4,65 m Height above floor 4,26 m Bsdpfx Ajvut Ryecnswp with oil-hydraulic drive, hydraulic drawing cushion in table No foundation pit necessary

Condition: used, Year of construction: 1990, pressure 160 t stroke 20 - 120 mm no. of strokes 30 - 180 /min distance between columns 1510 mm column travel -side 400 mm Bjdpfx Aeyx Ii Docnowp dayligth 820 mm table surface area 1430 x 900 mm hole in the table 1010 x 320 mm table height over floor 890 mm ram surface 1300 x 800 mm ram adjustment 100 mm material width 20 - 400 mm material thickness 0,3 - 5,0 mm feed length 1,0 - 9999,9 mm power requirement 52,0 kW weight of the machine ca. 29,0 t dimensions of the machine ca. 3,7 x 2,5 x 4,0 mxmxm with infinitely variable drive, back gears, pneumatic clutch/brake combination, hydraulic overload protection in ram, motoric ram adjustment, pneumatic counterbalance in ram, bolster plate, motoric centralized lubrication, electronic press force monitoring electronic roll feed Type KWV 400 ZDH 120 (YOM 2003), band-material oiler

Condition: used, Year of construction: 2023, machine/vehicle number: H300SV23-17, pressing force: 300 t, stroke length: 1,000 mm, table width: 1,000 mm, table length: 1,200 mm, overall weight: 21,000 kg, die cushion force: 130 t, die cushion stroke: 300 mm, Control and basic data • Control: SIEMENS PLC • Pressing force / capacity: 300 t • Motor power: 30 kW • Year of manufacture: 2023 • Serial number: H300SV23-17 Pressing area • Cylinder diameter: 380 mm • Stroke: 1000 mm • Tool dimensions (max.): 1400 × 1200 mm • Tool weight (max.): 5,000 kg Drawing cushion • Drawing cushion stroke: 300 mm • Drawing cushion force: 130 t Bwedpjzhlg Ajfx Acnop Speeds • Feed speed: 160 mm/s • Return speed: 200 mm/s Hydraulics and connection values • Pump output: 103 l/min • Oil volume: 1100 l • Operating pressure: 243 bar • Operating voltage: 380 V • Frequency: 50 Hz • Max. current: 60 A The machine is available immediately, has already been dismantled, and can be inspected.

Condition: good (used), Year of construction: 1997, Storti Multibi 18 Bwodpfsziavbox Acnjp 180mm cutting height Double shaft 2 x 45kW

Condition: used, Crane track rails – steel beams HE-B 300 from an 11-meter long hall Beam width: 300 mm Beam height: 300 mm Middle web: 11 mm Track rail: 50 x 30 mm Beam length: 2 x 10550 mm (total length 21100 mm) - A 5-ton crane ran on these crane track rails. - It was installed in a 10-meter hall. - The beams are one-piece, without a butt flange joint. - Consisting of 2 x 10550 mm Bwedszinz Eepfx Acnjp - White painted Self-weight per meter of crane track rail: 120 kg + 11.7 kg = 131.7 kg/m Self-weight of the crane track rails: approx. 2780 kg

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 2,807 h, load capacity: 2,000 kg, lifting height: 1,660 mm, fuel type: electric, mast type: simplex, construction height: 1,270 mm, fork length: 1,190 mm, empty load weight: 1,093 kg, total length: 2,558 mm, drive type: Elektro, construction width: 770 mm, Double-deck stacker Load center: 595 Mast type: Standard Technical condition: very good Front tire condition: New Bsdpszhygqefx Acnjwp Rear tire condition: New Battery voltage: 24V Battery capacity: 250Ah Battery manufacturer: Jungheinrich Battery type: PzS Battery year of manufacture: 2025 Battery condition: 80 - 100% Description: Inspection completed + safety check renewed Electric steering, drawbar operable from all sides, overhead guard made of Plexiglas, tandem load wheels, integrated charger, battery in like-new condition, refurbished by Jungheinrich.

Condition: used, Year of construction: 2005, Pressure 600 t distance between columns 2600 mm stroke 900 mm Distance table/ram, max. stroke up, adjustment up 1600 mm Table surface area 2500 x 1730 mm pressure of drawing cushion in table 250 t Die cushion stroke in table 400 mm Bwedevuuh Tspfx Acnjp Die cushion area in table 2300 x 1300 mm Die cushion pressure in ram 63 t Die cushion stroke in ram 160 mm Die cushion area in ram 1900 x 1300 mm Ram surface 2500 x 1730 mm Side window 1100 mm Oil volume 3500 l Power capacity 200,0 kW Dimensions (WxDxH) 4,1 x 2,8 x 9,6 m Height above floor 6,4 m year of manufacture 1974 - overhaul 2005: complete new electrical cabinet with control Siemens S7 and safety control Pilz with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram, hydraulic cutting impact cushioning stored in dismantled condition - Video at seller’s site before dismantling available

Condition: used, Year of construction: 1998, Pressure 800 t distance between columns 3550 mm stroke 1100 mm Bsdevuuhgjpfx Acnowp Distance table/ram, max. stroke up, adjustment up 1900 mm Table surface area 3500 x 1800 mm pressure of drawing cushion in table 350 t Die cushion stroke in table 280 mm Die cushion pressure in ram 80 t Die cushion stroke in ram 160 mm Ram surface 3500 x 1800 mm Side window 1900 mm Weight 100,0 t Floor Space (WxD) 5,3 x 4,3 m Height above floor 7,3 m Height below floor 5,0 - 6,0 m year of manufacture 1970 - overhaul 1998 with oil-hydraulic drive, hydraulic controllable drawing cushion in table and ram, hydraulic cutting impact cushioning, moving table (without rails for the moving table) Height beneath floor approx. 5 - 6 m stored in dismantled condition - Video at seller’s site before dismantling available

Condition: good (used), I am selling a Rema DS 12/ST in good condition. Bwodpfx Acou Uvv Tonep

Condition: excellent (used), For sale: a robust, double-station bookbinding/printing press from the renowned German manufacturer Karl Tränklein K.G., Maschinenfabrik Stuttgart – Schönaich. This machine was previously operated by the public sector unit Stadt Fürth (Germany), which ensures it is complete and well-maintained. The device is equipped with two independent workstations, a heavy-duty upper beam, and pressure adjustment via lever arms. The lower housing contains the mechanical and electrical systems; power is supplied through a 16A CEE connector (400V). The machine is mounted on wheels for easy mobility. Application This press is suitable for bookbinding, printing, modeling, technical works, and any applications requiring even pressure over a larger area. Ideal for book blocks, covers, laminates, paper and cardboard elements, and other materials that require pressing or stabilization under pressure. Technical condition – Complete unit – All levers and mechanisms function correctly – 400V power supply, CEE 16A plug – Mobile design on wheels – Normal signs of use visible in photos – Machine is ready for operation Manufacturer: Karl Tränklein K.G. Bodpfx Acjxzu Rqenjwp Country of manufacture: Germany (Made in Germany)

Condition: used, Year of construction: 1987, pressure 2000 t distance between columns 975 mm stroke 400 mm distance table/ram, max. stroke up, adjustment up 1000 mm Bwedpfx Aeyx Impscnop table surface area 1015 x 1050 mm table height over floor 800 mm capacity of ejector in table 6,3 t ejector stroke in table 100 mm capacity of ejector in ram 65 t ejector stroke in ram 100 mm ram surface 975 x 1050 mm return capacity 150 t speed down 235 mm/s speed up 250 mm/s working speed 5 - 20 mm/s oil volume 4000 l height over floor 3,65 m height beneath floor 3,75 m power requirement 194,0 kW weight 105,0 t dimensions (WxDxH) 5,0 x 6,5 x 7,4 m Calibrating press with oil-hydraulic drive, hydraulic ejector in table and ram

Year of construction: 1999, condition: used, Angle display: digital Bwjdpfx Aoy A Hikjcnjp Length stop flap measurement display: digital

Condition: new, Year of construction: 2025, Working width: 380 mm Working height: 250 mm 1st unit, rotor group: Group of two oscillating rotor brushes, Ø 200 mm, one 1.5 kW motor per brush, variable speed drive 2nd unit, rotor group: Group of two oscillating rotor brushes, Ø 200 mm, one 1.5 kW motor per brush, variable speed drive Both units with oscillation: yes Height adjustment: handwheel Height indicator: mechanical counter Feed speed: 1 - 6 m/min Feed motor power: 0.37 kW Vacuum carpet: yes Bwodev R U Ifjpfx Acnsp Machine length: 1400 mm Machine width: 900 mm Weight: 500 kg

Condition: excellent (used), CATALOGUE NUMBER 8008 TECHNICAL DATA - Number of clamping areas: 2 - Manually adjustable side clamps: 2 x 6 pcs - Pneumatic top clamps: 2 x 2 pcs - Max. length of bonded elements: 3000 mm - Max. height of bonded elements: 1000 mm - Max. thickness of bonded elements: 100 mm - Dimensions (L/W/H): 3000 x 1300 x 1650 mm - Weight: approx. 600 kg ADVANTAGES - Two working areas - Bonding length: 3000 mm Bwedjy T Rdyepfx Acnop - Unpainted - Mobile – on wheels - Used press, very good condition Net price: 12900 PLN Net price: 3071 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to significant fluctuations)

Condition: used, Year of construction: 2024, Cutting length: 3700 mm Drive: 2 x 3.0 kW motor 2 saw blades, diameter 600 mm / Z = 138 New saw feed: hydropneumatically prepared for installation of an electronic control system Aggregate on the left is fixed, on the right is movable R700i database for max. 400 basic profiles, 1000 color profiles USB and network connection / remote maintenance Cutting angle: 20° - 90° - 135° Integrated memory TFT color touchscreen Aggregate adjustment: stepless motorized aggregate adjustment 20° - 135° including section clamp (1x per aggregate) Indication of swivel range: swivels outwards Clamping device: vertical clamping device with mounting plate for holding profile-related parts Feed from the right: movable roller conveyor, support length 2900 mm, width 250 mm Stops: socket Extraction Software stop for overlengths Stop for short parts, pneumatically extendable Label printer: RAPID-specific label printer RED-300, installed in the control panel R700 sealing clamping device Control cabinet, freestanding R700 waste conveyor Cutting length 3.7 m Bwjdpfx Acozhpbdonop Inclined conveyor 1000 mm horizontal x 2500 mm vertical Storage location: customer

Condition: new, 1 brand new horizontal bandsaw machine with a swiveling frame and double miter capability (R/L) Bwjdpfx Aefk Ew Escnep Manufacturer: HUVEMA / BEKA-MAK, Origin Turkey Model: HU 230 DG-4 Cutting range: Round 230 mm Rectangular 320 x 130 mm Square 230 mm -45° Round 180 mm -45° Flat 230 x 100 mm -45° Square 150 mm +45° Round 210 mm +45° Flat 230 x 160 mm +45° Square 180 mm +60° Round 120 mm +60° Flat 120 x 100 mm +60° Square 100 mm Working height 760 mm Motor power, main drive 1.0 - 1.3 kW, 400 V, 50 Hz Motor power, coolant pump 0.12 kW 2 speeds 35 / 70 m/min Saw blade dimensions 2730 x 27 x 0.9 mm Dimensions L x W x H 1350 x 700 x 1300 mm Weight 415 kg Accessories / Special features: • Double miter capability through a swiveling frame o The material to be cut remains straight in space! o No need to turn the material for miter cuts! o High efficiency with enormous time savings! • Adjustable precision stops 0°, 45° and 60° on the left and 45° on the right • Interchangeable work table • Quick-release vise, can be shifted to the left and right • Adjustable length stop 500 mm for cuts of the same length • The lowering of the saw arm is regulated steplessly by a hydraulic cycle • Coolant system • Chip brush • Swiveling control panel • Electric safety switch for blade tension and saw blade guard • Automatic shutdown at the end of the cut • Emergency stop switch • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Germany

Condition: used, Year of construction: 1973, Max. cutting length 3200 mm (distance from 1st to 3rd saw blade) with left-side circular saw tiltable up to 45°. Cutting capacity 2200 x 2500 mm. 3 motors, each 4.5 kW. Both cross-cut saws tiltable from 45° to 90°, each with a scoring motor. All three saws up to 400 mm diameter. Minimum cutting width 210 mm. Both scoring saws pneumatically moved forward and back with vacuum suction cups for panel fixation. Storage location: Nattheim. Bwsdpfx Acevvkm Ionjp