Used Double Clipper for sale (11,950)

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Double table machining center Working range X 2,590 mm Working range Y 2,260 mm Working range Z 400 mm Number of milling spindles 2 Liquid-cooled spindle Main motor 19.2 kW Max rotational speed 24,000 rpm Aggregate heads 4 C-axis Tool clamping system HSK-F63 Tool change positions central magazine 24 Tool change on each head from 12 positions Boring heads vert. 20 (for each head) Horizontal boring heads X 8 Horizontal boring heads Y 8 Kedouqw E Njpfx Adwewt Blade for grooves in X, in Y 2 Platens Number 4 360 m³/h vacuum pumps T Jet system for chip blowing Nesting Manual labeling Bar code reader Tool length measurement Software BIESSE BIESSEWORKS ADVANCED, BIESSE B_NEST Weight 17,900 kg

Condition: used, Year of construction: 2017, x-travel 5850 mm y-travel 2500 mm z-travel 1000 mm Control 840D sl feeds x- + y-axis 20 m/min feeds z-axis 20 m/min acceleration 5 m/qs spindle drive - main spindle 60 kW spindle turning speed - stepless 24.000 U/min max. torque on the working spindle 87 Nm tool taper HSK-A63/F80 c-axis +/- 360 grad a- axis +/- 100 grad tool changer 20 stück coolant tank 2300 l surface area 6.000*2.500 mm number of T-slots 18 flute distance 125 mm Kjdpoycln Defx Adwswt dimensions of the machine ca. 14,8x7,3x5,8 m Machine table Width 2,500 mm Length 6,000 mm Number of T-slots 20 Distance of T-slots 125 mm Dimensions of T-slots 18H8 mm Max. table load 8,000 kg Travels Cross rail: X axis 5,850 mm Cross slide: Y axis, horizontal 2,500 mm Z axis, vertical 1,000 mm Feeds X-, Y- and Z-axes Feed rate 20 m/min Rapid traverse rate 45 m/min Acceleration 5 m/s² Vertical Slide Cross section 560x420 mm Motor spindle Drive power S1 (100% ED) 60 kW Max. speed 24,000 rpm Max. torque 87 Nm Tool interface HSK-A63/F80 C-axis Swivel range ±360 degree Feed 50 min-1 Acceleration 50 rad/s² Holding torque 1,400 Nm Clamping torque 4,000 Nm A-axis Swivel range ±100 degree Feed 50 min-1 Acceleration 50 rad/s² Holding torque 1,400 Nm Clamping torque 4,000 Nm Total dimensions Length 14,800 mm Width 7,300 mm Height 5,800 mm

Condition: used, Used 3C vacuum dissolver mixer 120 litre double jacket Material : Stainless steel Kwedpfxex Ryvto Adwjt Motor : 3 kw - Hp 4- Rpm 1420 - 3x 220/380 volts Electrical heating 3x 3 kw Useful capacity : 120 litre Agitator : dissolver Ø 120 mm Conical vessel Ø 600 x 200 mm - Height: 750 mm Equipped with: - 1 vacuum pump 0.37 kw - 1 double-jacket fluid circulation pump 0.26 kw - 1 circulation pump for the mechanical seal 0.5 kw

Condition: excellent (used), For sale: a robust, double-station bookbinding/printing press from the renowned German manufacturer Karl Tränklein K.G., Maschinenfabrik Stuttgart – Schönaich. This machine was previously operated by the public sector unit Stadt Fürth (Germany), which ensures it is complete and well-maintained. The device is equipped with two independent workstations, a heavy-duty upper beam, and pressure adjustment via lever arms. The lower housing contains the mechanical and electrical systems; power is supplied through a 16A CEE connector (400V). The machine is mounted on wheels for easy mobility. Application This press is suitable for bookbinding, printing, modeling, technical works, and any applications requiring even pressure over a larger area. Ideal for book blocks, covers, laminates, paper and cardboard elements, and other materials that require pressing or stabilization under pressure. Technical condition – Complete unit – All levers and mechanisms function correctly – 400V power supply, CEE 16A plug – Mobile design on wheels Kodpfx Adsxzu Rqowjwt – Normal signs of use visible in photos – Machine is ready for operation Manufacturer: Karl Tränklein K.G. Country of manufacture: Germany (Made in Germany)

Condition: used, functionality: fully functional, machine/vehicle number: WUN HG9, mileage: 47,496 km, power: 120 kW (163.15 HP), first registration: 09/2021, fuel type: diesel, empty load weight: 2,520 kg, maximum load weight: 980 kg, overall weight: 3,500 kg, wheelbase: 4,325 mm, next inspection (TÜV): 12/2027, fuel: diesel, fuel tank capacity: 71 l, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 7, loading space length: 3,400 mm, loading space width: 2,035 mm, Equipment: ABS, AdBlue, Android Auto, Apple CarPlay, Bluetooth, EBS, USB port, air conditioning, airbag, central locking, electronic stability program (ESP), full service history, hill-start assist, onboard computer, power assisted steering, soot filter, truck registration, 9147 PAINT COLOUR ARCTIC WHITE MB 9147 A50 Front axle with increased load capacity A11 Control code rear axle, ring gear 215 AR2 Axle ratio i = 3.923 C6L Multifunction steering wheel C907 MODEL SERIES 907 TRANSPORTER VS30 CB1 Suspension for comfort and cargo protection CB7 Stabilization Level I CL1 Steering wheel adjustable for tilt and height E1D Digital radio (DAB) E3M MBUX multimedia system with 7-inch touchscreen F35 Rear wall window F61 Interior mirror F68 Exterior mirrors, heated and electrically adjustable F907 MODEL SERIES 907 TRANSPORTER VS30 FHL DOUBLE CAB FJ1 Folding cover for storage compartment FJ4 Storage compartment under dashboard FM3 WET WIPER SYSTEM GD8 6-speed manual transmission ECO Gear 360 HO0 Warm air duct to passenger compartment H21 Heat-insulating glass with band filter on windscreen HH9 SEMI-AUTOMATICALLY CONTROLLED AIR CONDITIONING TEMPMATIC HI1 Climate zone 1 (cold/comfort) IC1 Model series C907 / C910 Sprinter IEO Model series C907 VS30 RWD IF4 Chassis with double cab IG4 Standard IG5 Basic IR6 Wheelbase 4325 mm, rear overhang 1615 mm IT4 3.5-tonner J1A Seat belt warning for rear bench J55 Seat belt warning for front passenger seat J58 Seat belt warning for driver's seat J65 Outside temperature display JA8 Crosswind Assist JF1 Rain sensor JH3 Communication module (LTE) for digital services JI7 Initial maintenance interval 60,000 km K13 Main tank 71 litres LA2 Light Assist LB1 Side marker lights MG3 Engine OM 651 DE 22 LA 120 kW (163 hp) 3800 rpm MJ8 ECO start/stop function MP6 Engine version Euro VI MQO OBD (On-Board Diagnostics) level D P02 Dropside body with aluminium side walls P47 Front mud flaps P48 Rear mud flaps PZ7 Toolboxes left and right under dropside body Q11 Longitudinal frame reinforcement R65 Spare wheel holder at end of frame RRO Tyres, optimised for rolling resistance RS3 Steel wheels 6.5 J x 16 RX5 Wheel brand Maxion Wheels S22 Armrest for driver's seat S23 Front passenger seat, twin seat S78 Grab handle for inner seat on twin seat Kwodjx U Dznspfx Adwjt SA5 Driver airbag SB1 Comfort driver's seat SK2 Driver's seat occupancy detection T75 Entry grab handles for driver and passenger VF7 Fabric Maturin black X09 Mercedes-Benz MobiloVan with DSB and GgD XV1 Minimum reference mass required 2381 kg Z1N Approval N1 Z4W Manufactured in Ludwigsfelde Z52 ECE version Z75 Reinforced body shell

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, CATALOG NUMBER 7563 Kwodpfx Adsx S Nadewjt Technical data: - track width: 340mm - shaft width: 360mm - blade bore diameter: 70mm - max. blade diameter: 315mm - max. cutting height: 180mm * from above - feed shaft, toothed, pneumatically pressed - 2 rows of kickback fingers - 3 smooth pressure slip rollers - kickback fingers - shaft with saw blades - 3 smooth pressure slip rollers - kickback fingers * from below - infeed traction shaft, toothed - track - shaft with saw blades - track - stepless feed speed regulation via inverter - main motor 2x55kW - feed motor 4kW - electric lifting of upper body up/down - electric adjustment of saw blade shafts - central lubrication - extraction port diameter: 2x150mm - dimensions (L/W/H): 2800x2400x1900mm - weight approx. 5000kg ADVANTAGES – Italian production – double shaft – ideal for large elements – used multi-blade saw, in very good condition Net price: 145,900 PLN Net price: 34,740 EUR based on 4.2 EUR rate (Prices may change with significant fluctuations)

Condition: used, total width: 940 mm, total length: 3,750 mm, total height: 1,450 mm, - Documentation available: No - CE certificate present: No - Main motor power [kW]: 1.1 - Max. cutting height [mm]: 110 - Transport dimensions: 3750mm x 940mm x 1450mm (l x w x h) - Transport packages [pcs.]: 1 Financial information Kwedpoxa Eibofx Adwet VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Field of application: Mining Explore the superior processing capabilities of the Polygonmach Coarse Material Washer, a state-of-the-art solution designed to exceed expectations in processing sand and gravel. Polygonmach, a leading name in the industry, constantly pushes the boundaries of innovation to bring high-quality, reliable solutions to businesses. Kwjdpfx Ajx Dh S Hjdwet The Polygonmach Coarse Material Washer is a fundamental tool in the industry, specializing in the thorough cleaning, classification, and dewatering of coarser fractions. Designed to handle robust materials such as sand and gravel, it significantly enhances the quality of your output, leading to increased customer satisfaction and business growth. Built with high-capacity processing in mind, our Coarse Material Washer employs powerful scrubbing technology. This action facilitates the removal of impurities, thus unlocking the true value of your raw materials. The result is high-quality end products that meet rigorous industry standards. One of the key features of the Polygonmach Coarse Material Washer is its replaceable heavy-duty paddles. These are engineered to withstand the harsh environment, thereby increasing machine lifespan and reducing maintenance costs. The robust design is well-suited to large-scale operations, delivering high-volume processing efficiently. Moreover, it comes with an adjustable weir plate that offers control over the water volume and the fines. This flexibility empowers you to produce materials of desired specification and moisture content, guaranteeing consistent product quality. The Coarse Material Washer from Polygonmach is not only highly functional but also user-friendly.

Condition: used, Year of construction: 1985, pressure 500 t distance between columns 3100 mm stroke fix 300 mm Ksdpfx Asvut N Aedwewt no. of strokes 20 - 70 Hub/min dayligth (stroke and adjustment up) 1000 mm column travel -side 1400 mm table surface area 2800 x 1600 mm ram surface 2800 x 1450 mm power requirement 90,0 kW weight of the machine ca. 100,00 t required space 5,75 x 3,2 x 7,8 m ram adjustment 100 mm height over floor 6,4 mm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment as is where is, WITHOUT putting into operation, stored in dismantled condition (no PLC + main motor available)

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 4000 S PLUS Full Otomatik Servo Motorlu Çift Köşe Alüminyum Pvc Kesim Makinası, - It is a fully automatic controlled cutting machine designed to cut PVC and Aluminum profiles straight or angled with a double head Ø600 mm saw. - Hydro - Pneumatic Hydro - check controlled saw movement - Cutting Accuracy +/- 0.1 mm - High precision thanks to backlash-free gearbox - Automatically adjustable to two inward angles at 90 and 45 degrees - 15" Windows-based industrial PC - Diamond saw 2 x Ø600 mm - Servo motor motion system - 21.5 cm saw exit distance and 70 mm x 3 profile cutting capacity - Hydro-check saw speed adjustment - 9.5 meter cutting feature - 90 degree wedge slicing feature - Multi-language support - Conveyor profile support unit - Motion-sensitive support arm - Profile support unit between cutting heads - Spray saw cooling system - 2 vertical clamps - 4 horizontal clamps OPTION Kwsdpfx Aoramy Todwjt - Barcode printer - Cutting list transfer via USB Memory

Condition: excellent (used), Year of construction: 2024, operating hours: 193 h, functionality: fully functional, travel distance X-axis: 7,200 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 340 mm, cutting width (max.): 335 mm, workpiece length (max.): 6,000 mm, milling spindle speed (max.): 6,000 rpm, section length (max.): 6,000 mm, TECHNICAL DETAILS - Profile Milling Machine Processing length: 7,200 mm Number of axes: 4 Control: eluCAM graphical, Windows XP user interface Workstations: 2 independently operating stations Turret tool changer: 8 tools, servo motor driven Tool holder: BT 30 Disc mill diameter: 180 mm Tool length: 150 mm (from point of attachment) Travel distances Travel X-axis: 7,200 mm (without end-face processing), 7,080 mm (with end-face processing) Travel Y-axis: 480 mm Travel Z-axis: 340 mm Rapid traverse X-axis: 60 m/min Rapid traverse Y-/Z-axis: 30 m/min Positioning accuracy: ±0.1 mm/m Spindle Milling spindle speed: 1 to 6,000 rpm Milling spindle power: 6.0 kW Supply Air connection: min. 7 bar Air consumption: 100 l/min Electric connection: 400 V, 3~, 50 Hz, 35 A EQUIPMENT two independent workstations with light barrier and camera system Non-swiveling inclined milling head for 2 tools, Er20A, up to 18,000 rpm Inclined milling head swiveling 4 × 90°, Er20, up to 22,000 rpm Inclined milling head non-swiveling for steel, Er20A, 1,554 rpm Fixed saw head i=1:1, for D=300 mm saw blade, suitable for 90° cross cuts Carbide saw blade Z=100, D=300 mm, cutting width 3.2 mm Tool holder i=1:3.86 for 18,000 min⁻¹, ER25 Cooling/lubricating unit for steel processing Disc milling holder BT30, D=16 mm Disc cutter D=92 × 6 mm, Z=14, D=16 mm, carbide teeth Kwedjwprmzspfx Adwst TECHNICAL DETAILS - Double Mitre Saw Max. cutting length: 6,000 mm Min. cutting length at 90°: 335 mm Min. cutting length at 45°: 335 mm Saw blade diameter: 420 mm Cutting angle (rotation): pneumatically adjustable 90° and 45° inside, intermediate angles and 22.5° acute manually adjustable with digital display Cutting angle (tilt): pneumatically adjustable 90° and 45° inside Saw direction: saw blades move from bottom to top Control Control type: E580/1 Length adjustment: automatic with positioning control Saw blade tilt: pneumatically automatic between 90° and 45° Positioning accuracy: ±0.1 mm/m Positioning: pneumatic locking Operating system: Windows Saw unit Speed: 2,800 rpm Power per motor: 4,000 W (5.5 HP) Saw blade cooling: available Air consumption per cycle without cooling: 40 l Air consumption per cycle with cooling: 64 l Supply Electric connection: 230/400 V, 3-phase, 50 Hz Air connection: 7 bar Dimensions and Weight Length: 7,550 mm Width: 1,600 mm Height: 1,450 mm Weight: 1,750 kg EQUIPMENT Automatically closing protective covers Electronic positioning of the heads with +/- 0.1 mm/m accuracy Digital angle display for manually adjustable special angles Pneumatically adjustable saw blade rotational and tilt angles Operation via Windows control with 8.4" display and handwheel Cooling system for saw blades included Saw unit with bottom feed for optimal cutting force

Condition: excellent (used), CATALOG NUMBER 7244 TECHNICAL DATA - max working width: 800 mm - max working thickness: 160 mm Top side: - smooth feed roller - anti-kickback fingers - segmented, toothed, feed roller (allows simultaneous planing of multiple elements) - 2 pressure rows - segmented, toothed, feed roller (sequential, sectional) - pressure unit - planing shaft 810 mm, 4 knives, 18.5 kW - pressure unit - smooth, metal feed roller Bottom side: - adjustable infeed table with smooth roller - smooth feed roller - planing shaft 810 mm, 4 knives, approx. 10 kW - 2 smooth, metal feed rollers, adjustable - metal, smooth feed roller - electric table elevation - stepless feed speed regulation 7–40 m/min - motor approx. 2.2 kW - extraction port diameter 200 mm / 180 mm - dimensions (L x W x H): 1950 x 2100 x 1700 mm - weight approx. 2500 kg Ksdpfx Adox Sykaewewt – manufactured in the Czech Republic – very good condition – used planer Net price: 34,900 PLN Net price: 8,200 EUR (depending on exchange rate of 4.2 EUR) (Prices may vary with greater fluctuations)

Condition: new, Year of construction: 2026, machine/vehicle number: SÇ 400 S Aluminyum Pvc Çift Kafa Kesim Makinası, • Complies with CE standards. • Cutting accuracy +/- 0.1 millimeter • Automatic adjustment to two angles: 90° and 45°. • Automatic slicing at two angles: 90° and 45°. • Touchscreen color panel display • Remote connection and technical support capability • 2 x 500 mm saw blades • With Ø500 mm saw blades, max 16.5 cm cutting depth and ability to cut 2 x 80 mm profiles • Adjustable saw speed • 6-meter cutting capacity • Block cutting feature Kjdpfxoramvae Adwswt • Unlimited language support • Unlimited measurement memory capacity • Conveyor right/left profile support unit • Profile support unit between cutting heads • Spray saw cooling system • 2 vertical clamps • 4 horizontal clamps • Air gun OPTIONS • Barcode printer • Cutting list transfer via USB memory stick • Hydro-pneumatic, hydro-check controlled saw movement

Condition: excellent (used), CATALOGUE NUMBER 7130 TECHNICAL DATA - Maximum working width: 800mm - Maximum working thickness: 200mm Top section: - Pawls - Toothed feed roller - 3 rows of pressure rollers - Planing shaft 810mm, for 4 knives (2 blades fitted), approx. 7.5kW - Pressure - Smooth, metal feed roller Bottom section: - Adjustable infeed table with slip roller - Planing shaft 810mm, for 4 knives (2 blades fitted), 7.5kW - Smooth, metal slip roller - Electric table raising - Extraction nozzle diameter: 120mm Kwodpsx Sww Defx Adwet - Dimensions (L/W/H): 1900x1450x1350mm - Weight approx. 2500kg – Czech manufacture – Very good condition – Used planer Net price: 33,500 PLN Net price: 7,970 EUR depending on EUR 4.2 rate (Prices may change with significant fluctuations)

Condition: used, mileage: 5,84,263 km, power: 370 kW (503.06 HP), first registration: 01/2012, fuel type: diesel, number of seats: 80, gearing type: automatic, emission class: euro5, color: green, brakes: retarder, Equipment: ABS, air conditioning, bathroom, navigation system, parking heater, +++Original KM+++ +++Clutch replaced at 440,000 km+++ General Engine: Mercedes-Benz AdBlue Emission standard: EURO 5 Total seats: 80 Seats: 78+1+1 sleeper seats with lap belts Transmission: Automatic Safety * Retarder * Cruise control * Adaptive cruise control * ABS, ASR, EBS * Fog lights * Immobiliser * Brake assist Ksdpfx Asx Uvdbjdwewt * Reversing camera * Multifunction steering wheel Passenger compartment * Auxiliary heater * Wood-effect flooring * Air conditioning * Tables * Curtains * Luggage racks * Luggage nets * Adjustable air vents * Reading lights * Double glazing * Footrests * Refrigerator * Central WC * Leather headrest inserts * Tour guide microphone * Driver microphone Audio, Communication, Electronics * Navigation system * Radio, CD * Video, DVD * Power inverter Exterior * Trailer coupling * Lift/lowering system * Power steering * Tachograph card * Sun visor * Electrically adjustable exterior mirrors * Driver's door * Ski box mountings * Central locking * Roof hatches Other * Twin tyres * Vehicle length: 13.89 m * Vehicle width: 2.55 m * Vehicle height: 4.00 m * Wheel covers * Tyres: Front approx. 50% * Tyres: Middle approx. 50% * Tyres: Rear approx. 50% Our internal vehicle number: 12117 Errors excepted. Images and text may differ from the actual vehicle. Over 300 vehicles available at all times.

Condition: used, Year of construction: 1961, turning diameter Max. 4200 mm faceplate diameter 3700 mm turning height Max. 2600 mm workpiece weight Max. 35 t Power 80 PS DIGITAL CONTROL DISPLAY Largest diameter with the crossbeam supports: 4200mm Kwedpjuddnvjfx Adwjt Largest turning diameter with side support: 3900mm Largest turning height above faceplate: 2500 Side support 1 vertical grinding ram: 1200mm stroke (out of operation) 1 turning ram: 1400mm stroke

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PVC Çift Kafalı Üretim Makine Set, • Enables the production of 80 - 120 windows in an 8-hour working environment. • Our set offers fast production capability to customers with different machine options. • Available in 380 Volt or 220 Volt versions. • Compliant with CE (European) standards. • Door-to-door delivery prices to any destination worldwide. • References available from our previous customers in your country. MACHINE CONTENT • SC 400 Aluminum & PVC Double Head Cutting Machine (Ø500 mm saw option) • SC 100 PVC Double Corner Welding Machine (0.2 mm welding capability) • SC 501 Aluminum & PVC Handle Slot Drilling, Channel Milling, and Water Drainage Machine • SC 301 Aluminum & PVC Bead Cutting Machine • SC 211 Aluminum & PVC Mullion Preparation Machine (2 blades) • SC 601 Automatic Corner Cleaning Machine You can increase your production capacity with different machine options. Please contact us for the catalogue. Kedpfx Adorfyzfjwjwt

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 4550 PROFILE CUTTING AN PROCESSING CENTER ( 9 AXIS & 10 STATION ), - In aluminum and PVC profiles; Grooving, hole drilling, marking, cutting at different angles, etc. Ability to perform operations - 10 special air-cooled spindle motors for high-speed aluminum - Axis speeds averaging 120 m/d - Precise 3-axis profile holding station - Profile feeding capacity 7 pieces - Profile machining length maximum 6500 millimeters / minimum 600 millimeters - Automatic profile length detection - Windows-based, easily adjustable user-friendly interface - Data transfer via USB, Online remote monitoring system - Remote connection support - 23.8" Touch high-performance touchscreen - 30 - 150 degrees between, +- 0.1 degrees servo-controlled cutting unit that allows precise cutting - Transporting the cut waste profiles to the collection cart with automatic conveyor system Kwjdsrcm Ruspfx Adwjt STANDARD EQUIPMENT - Ø550 Millimeter saw - Automatic waste chip conveyor discharge unit - Barcode printer OPTIONAL EQUIPMENT - Compatibility with CAM programs - Optional length - Output conveyor with belt system - Safety barrier (Sensor)

Condition: used, Year of construction: 1972, Pressure 800 t distance between columns 3250 mm stroke 1100 mm Distance table/ram, stroke up 1900 mm Table surface area 3100 x 1900 mm pressure of drawing cushion in table 300 t Die cushion stroke in table 300 mm Die cushion area in table 2500 x 1800 mm Die cushion pressure in ram 80 t Die cushion stroke in ram 200 mm Die cushion area in ram 2200 x 1000 mm Ram surface 3100 x 1900 mm Side window 900 mm Kodpfxevuuhyo Adwewt Oil volume 4700 l Power capacity 200,0 kW Dimensions (WxDxH) 4,95 x 3,3 x 10,2 m Height above floor 7,05 m with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram, hydraulic cutting impact cushioning stored in dismantled condition - Video at seller’s site before dismantling available

Condition: used, Year of construction: 2005, Pressure 1000 t distance between columns 4100 mm stroke 1200 mm Distance table/ram, stroke up 2100 mm Table surface area 4000 x 2200 mm pressure of drawing cushion in table 360 t Die cushion stroke in table 300 mm Die cushion area in table 3500 x 1600 mm Die cushion pressure in ram 100 t Die cushion stroke in ram 160 mm Die cushion area in ram 3250 x 1600 mm Ram surface 4000 x 2200 mm Side window 1300 mm Kwsdjvuubgopfx Adwst Oil volume 8000 l Power capacity 300,0 kW Dimensions (WxDxH) 5,75 x 4,3 x 9,55 m Height above floor 7,7 m year of manufacture 1973 - modernization 2005 with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram, hydraulic cutting impact cushioning stored in dismantled condition Video at seller’s site before dismantling available

Condition: used, Year of construction: 1973, Pressure 1600 t distance between columns 4100 mm slide stroke 1450 mm Distance table/ram, stroke up 2750 mm distance table/blank holder, stroke up 2200 Table surface area 4000 x 2200 mm ram pressure 1000 t Ksdpfxjvut Ifo Adwswt Pressure of blank holder 600 t stroke of blankholder 1000 mm blank holder surface 4050 x 2200 mm Ram surface 3200 x 1650 mm pressure of drawing cushion in table 360 t Die cushion stroke in table 300 mm die cushion area 3500 x 1600 mm Side window 1100 mm Oil volume 9000 l Power capacity 390,0 kW Weight 250,0 t Dimensions (WxDxH) 5,95 x 4,3 x 10,5 m Height above floor 8,6 m with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram stored in dismantled condition - Video at seller’s site before dismantling available

Condition: used, Year of construction: 2010, pressure 600 t distance between columns 3640 mm stroke fix 350 mm no. of strokes 11 - 44 /min dayligth (stroke and adjustment up) 1550 mm column travel -side 2200 mm table surface area 3600 x 2500 mm ram surface 3600 x 2500 mm ram adjustment 400 mm band width 2000 mm material thickness 0,6 - 2,5 mm material cross-cut 1600 x 2,5 mm² coil weight 35,0 t Number of Straightening rolls 13 0 straightening roll diameter 50 mm Blanking Line (press, coil line, blank stacking system) yom 1993 - 2010: new control Siemens S 7 - press Schuler type EBS 4-600 with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking Kwjdpfxovut Dye Adwet moving tables (2x) without rails for the moving tables - decoiler make Schleicher, type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll - coil lifting device - extractor device make Schleicher - shear - straightening machine make Schnutz, type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls - coil loop bridge - roll feed make Schleicher, type WV-SYS-A 160-2000, yom 1994 - blank stacker NSM-Magnettechnik stored in dismantled condition - Video before dismantling available

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Storage location: Garbsen Kodjxnlgcjpfx Adwewt

Condition: excellent (used), Table length: 8000mm Table width: 2500mm Between columns: 3100mm Weight of workpiece: 65t Kwodpjx Tpmyefx Adwjt Weight: 127t

Year of construction: 2012, condition: ready for operation (used), I sell a used bender for double glazing frames. Kwodpfx Aencd Dqodwjt