Used Double End Trim Saw for sale (40,337)

Condition: used, Year of construction: 2006, operating hours: 1,500 h, functionality: unexamined, machine/vehicle number: 0799335115, cutting length (max.): 4,500 mm, The machine was purchased used and never used. It's in good condition. Kdedpfx Aowir D Toabsu

Condition: excellent (used), functionality: fully functional, OMS FC330R double saw for wood, aluminum 2 x 2.2 kW Ksdpfewthgfjx Aabedu Specification: • condition - used, after inspection • manufacturer - OMS • model - FC 330 R • main engines - 2 x 2.2 kW • hydraulic-pneumatic control • max. cutting length - 351 cm • min. cutting length - 36 cm • max cutting cross-section - 100x150 mm (at a right angle) • max disc diameter - 330 mm • extraction nozzles fi 60 mm • cutting at an angle in the range of -45 to +45 degrees (right, left) • clamps cut elements vertically • weight - approx. 800 kg • dimensions - 405 x 100 x 145 cm (length x width x height) Additional information: • very good, factory technical condition • the photos presented show the actual condition of the item for sale • possibility of switching on and checking the device on site

Condition: used, Year of construction: 1980, Maximum cutting width: 4500 mm Kjdpfxow E D E Uo Aabsdu Connected load: 9.37 kW

Condition: like new (used), Model: Ttsa Description: Double sided round end tenoner Balestrini mod. TTSA complete with loader 1. Automatic loader 2. Control panel Kodpfx Aehmug Eeabjdu 3. min / max working length 240/1200 mm 4. maximum tenon size 100x30 mm 5. Capacity: 1200 tenons/hour (600 pieces/hour) 6. Tool rotation 9,000 rpm 7. Total power 6,5 kW

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 2396, overall weight: 140 kg, rotational speed (min.): 2,800 rpm, Total width: 240 mm Total height: 120 mm Spindle speed (min): 4,000 rpm Spindle speed (max): 7,000 rpm Total weight: 300 kg Rotation speed (max): 7,000 rpm Rotation speed (min): 4,000 rpm Input voltage: 400 V Equipment: Rotation speed infinitely variable Soundproof automatic overhead milling machine. Kodpfowhpnajx Aabodu Adjustable feed and rotation speed. Milling at an angle from -45° to 45° by adjusting the fence. Easy and quick blade change thanks to the pneumatic quick coupler. Pjbtxbovf Nw Roq H Iepr

Condition: good (used), Year of construction: 2009, in a good working condition, DG244/E555/1 , 6 meters Kdedpstuvg Dofx Aabju

Condition: good (used), Year of construction: 2016, Year: 2016 - technically efficient, ready to work - after full service - cutting length: 4000 mm - discs: 500 mm (feed from the rear) - pneumatic inclination of both heads: 90°, 45°, 22.5°, intermediate angles set manually - operator panel with Windows - cooling and lubrication installation for both heads - movable roller feeder Kdjdpfxotqmmdj Aabju - vertical and horizontal pneumatic clamps - automatic disc covers - delivery device for long elements - safety gates

Condition: ready for operation (used), OMGA V113P double saw for frames, strips Specification: • condition - used • manufacturer - OMGA • model - V113P • two 300 mm diameter discs permanently set at a 45 degree angle each • total power 2.2 kW (2 engines of 1.1 kW each) • spindles fi 30 mm • pneumatic clamps • cutting cross-section ~ 100 x 130 mm • original painting • additional tables extending the tops by 100 cm (2 pcs.) • 1993 year of production • weight 225 kg • dimensions 80 x 142 x 132 cm cm (length x width x height) Additional information: Kdsdpfxowgdgne Aabou • very good, factory technical and visual condition • the photos shown show the actual condition of the item for sale • possibility of switching on and checking the device on site

Condition: excellent (used), Year of construction: 2024, operating hours: 193 h, functionality: fully functional, travel distance X-axis: 7,200 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 340 mm, cutting width (max.): 335 mm, workpiece length (max.): 6,000 mm, milling spindle speed (max.): 6,000 rpm, section length (max.): 6,000 mm, TECHNICAL DETAILS - Profile Milling Machine Processing length: 7,200 mm Number of axes: 4 Control: eluCAM graphical, Windows XP user interface Workstations: 2 independently operating stations Turret tool changer: 8 tools, servo motor driven Tool holder: BT 30 Disc mill diameter: 180 mm Tool length: 150 mm (from point of attachment) Travel distances Travel X-axis: 7,200 mm (without end-face processing), 7,080 mm (with end-face processing) Travel Y-axis: 480 mm Travel Z-axis: 340 mm Rapid traverse X-axis: 60 m/min Rapid traverse Y-/Z-axis: 30 m/min Positioning accuracy: ±0.1 mm/m Spindle Milling spindle speed: 1 to 6,000 rpm Milling spindle power: 6.0 kW Supply Air connection: min. 7 bar Air consumption: 100 l/min Electric connection: 400 V, 3~, 50 Hz, 35 A EQUIPMENT two independent workstations with light barrier and camera system Non-swiveling inclined milling head for 2 tools, Er20A, up to 18,000 rpm Inclined milling head swiveling 4 × 90°, Er20, up to 22,000 rpm Inclined milling head non-swiveling for steel, Er20A, 1,554 rpm Fixed saw head i=1:1, for D=300 mm saw blade, suitable for 90° cross cuts Carbide saw blade Z=100, D=300 mm, cutting width 3.2 mm Tool holder i=1:3.86 for 18,000 min⁻¹, ER25 Cooling/lubricating unit for steel processing Disc milling holder BT30, D=16 mm Disc cutter D=92 × 6 mm, Z=14, D=16 mm, carbide teeth TECHNICAL DETAILS - Double Mitre Saw Max. cutting length: 6,000 mm Min. cutting length at 90°: 335 mm Min. cutting length at 45°: 335 mm Saw blade diameter: 420 mm Cutting angle (rotation): pneumatically adjustable 90° and 45° inside, intermediate angles and 22.5° acute manually adjustable with digital display Cutting angle (tilt): pneumatically adjustable 90° and 45° inside Saw direction: saw blades move from bottom to top Control Control type: E580/1 Length adjustment: automatic with positioning control Saw blade tilt: pneumatically automatic between 90° and 45° Positioning accuracy: ±0.1 mm/m Positioning: pneumatic locking Operating system: Windows Saw unit Speed: 2,800 rpm Power per motor: 4,000 W (5.5 HP) Saw blade cooling: available Air consumption per cycle without cooling: 40 l Air consumption per cycle with cooling: 64 l Supply Electric connection: 230/400 V, 3-phase, 50 Hz Air connection: 7 bar Dimensions and Weight Length: 7,550 mm Width: 1,600 mm Height: 1,450 mm Weight: 1,750 kg Kedpfx Aowprmzsabedu EQUIPMENT Automatically closing protective covers Electronic positioning of the heads with +/- 0.1 mm/m accuracy Digital angle display for manually adjustable special angles Pneumatically adjustable saw blade rotational and tilt angles Operation via Windows control with 8.4" display and handwheel Cooling system for saw blades included Saw unit with bottom feed for optimal cutting force

Condition: good (used), Blade diam 420mm, lenght 4,800mm. Ksdpfewzvacox Aabodu

Condition: good (used), Year of construction: 2005, functionality: fully functional, workpiece weight (max.): 1,230 kg, AUTOMATIC SAW / DOUBLE HEAD STB / FIMTEC SD 500 S6 YEAR 2005 Ksdpfx Aer E Alqjabodu

Condition: new, Year of construction: 2025, CORMAK H-50/70 is a highly efficient column band saw for semi-automatic cutting of steel profiles, cast iron and non-ferrous metals. Its column design ensures rigidity during cutting, and employment of a completely different arm guiding technology than in pivot band saws provides cutting time reduction and accuracy increase. Ksdpfx Ajizi T Ejabedu Machine description CORMAK H-50/70 is a highly efficient column band saw for semi-automatic cutting of steel profiles, cast iron and non-ferrous metals. Its column design ensures rigidity during cutting, and employment of a completely different arm guiding technology than in pivot band saws provides cutting time reduction and accuracy increase. CORMAK H-50/70 semi-automatic band saws, after being switched on, do the whole cutting cycle automatically, i.e. clamp the cut material in the hydraulic vice, switch on the cutting band, lower the cutting arm (adjustable speed), stop the machine after cutting, raise the arm up (adjustable arm height) and switch the hydraulic vice off. Manual handling of the machine is simplified to feeding material towards the bumper. Solid uniform cast iron arm along with the refined, stable design ensure that CORMAK H-50/70 is rigid and reliable, providing very precise cutting. Hydraulic band tension provides optimum cutting. In the case of band breakage the machine stops automatically. Precise guiding of the band is ensured by guides with bearings and cemented carbide inserts. The innovativeness and production of semi-automatic and automatic series "CORMAK-PREMIUM LINE" band saws, compliant with the norms and standards consistent with ISO:910001 and ISO:140001 certificates, warrant safety, quality and reliability of the product. M3V motors from ABB, a renowned worldwide manufacturer, warrant long-term reliability. Technical data Type Semi-automatic Arm raising and lowering Hydraulic, with stepless lowering adjustment Band speed 26/41/66 m/min Vice Hydraulic Cutting band dimensions 41×1.3×6430 mm Total power 8 kW Dimensions 3200×1100×2100 mm Weight 2900 kg Maximum cutting range [mm] Angle 0º ø500 500×700 Default equipment Control panel at the front of the machine Semi-automatic work Built-in hydraulic unit Arm position memory function Brush for cleaning the band Hydraulic band tension Semi-automatic work Hydraulic band tension Cooling system Bi-metal cutting band EC declaration of conformity User manual

Condition: good (used), Year of construction: 2006, Year: 2006 - technically efficient, ready to work - after full service - cutting length: 6000 mm - discs: 550 mm Kdjdpfx Aer Ikvueabju - E555 control - digital angle indicator - pneumatic angle adjustment 45-90 degrees - cutting according to external dimensions, without correction - cooling installation - roller feeder - vertical pneumatic clamps - automatically lowered and raised disc guards - chip extraction for each head

Condition: used, Year of construction: 2007, Complete line from 2007 Press 6.3m long Tenner with a power of 25 kW Feeding width of the tenoner 600 mm Height of the milling spindle 180 mm Maximum length of the fed material 1.2 m Maximum glued cross-section on the press 15x10cm Kdedpfx Ajv Euywjabou Maximum length of the cant 6.3m with cutting

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2950x1620x1770 mm Kedpfx Aevz Hxkoabodu Weight 3300 kg Total power requirement 71,5 kw

Condition: new, Year of construction: 2025, operating hours: 1 h, SPECIAL OFFER !!! Sawmill Viking VBS1100 SB(1) Condition: NEW! Log bandsaw with single-sided bandsaw blades. (Double cut, back and forth, possible for an extra charge!!!) Roller diameter: 950mm Bandsaw blades: double-sided = 160mm wide, single-sided = 140mm wide Feed speed: 0-60m/min. Log diameter: up to 1100mm Cutting length: 6m (up to 9m extension possible, not included) Total weight: 7500 kg Digital cutting thickness adjustment via CNC touch panel Manual control unit with joystick Cutting view via green laser (video monitoring with surcharge) 22 kW saw motor Ksdewzavuopfx Aabodu Infinitely variable feed speed (0 - 60 m/min) Block manipulation: Hydraulic Trimmers, wet grinders, band saw blades, circular saw blades, etc. can also be purchased from Droste Schärftechnik. (Not included)

Condition: excellent (used), Year of construction: 2015, AUTOMATIC TWO-HEAD SAW ELUMATEC DG 244 + E580 -5 YEAR 2015 Kdjdjwltqajpfx Aabou

Condition: excellent (used), I sell the double end cutting and tenoning machine CELASCHI TSA 300. Working width up to 3000mm Feeding speed 3-18 m/min. Configuration left side / fix: 1 pc. cutting saw aggregate 4,0 KW Ksdpfxjvxu Uho Aabsdu 1 pc. moulding aggregate 5,5 KW Configuration right side / moving: 1 pc. cutting saw aggregate 4,0 KW 1 pc. moulding aggregate 5,5 KW Material pressure feeding band from top Throughfeed machine. Very good condition. Available immediately.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 5350x4650x1820 mm Weight 7500 kg Kdodpfevz Hdyex Aabsu Total power requirement 47 kw

Condition: good (used), Year of construction: 1997, I sell the double mitre saw BAUERLE DS-II. Cutting length 230 - 1500mm Cutting width max. 1500mm Kedpfx Aewif T Usabjdu Cutting height max. 145mm 2 2 Vertical pneumatic Material pressures 2 Motors x 4,0kW (5,5 HP) Good condition. Available immediately.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4850x4650x1820 mm Weight 6500 kg Total power requirement 47 kw Ksdpfovz E R Sox Aabsdu

Year of construction: 2007, condition: excellent (used), I sell the double end cutting and tenoning machine FRIULMAC IDRAMAT, Year 2007. Working width up to 2500mm Ksdpfx Aaeib A E Asbsdu Configuration left side / fix: 1 + 1 pcs. cutting saw aggregates / 3,0 + 3,0 KW 1 + 1 pcs. grooving saw aggregates front + back Configuration right side / moving: 1 + 1 pcs. cutting saw aggregates / 3,0 + 3,0 KW 1 pc. special milling aggregate / 5,5 KW Material pressure feeding band from top Special construction, suitable also for sizing. Throughfeed machine. Siemens Simantic control panel. Very good condition. Available immediately.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 5350x4380x1820 mm Weight 6800 kg Kdedpfxsvz E R Eo Aabju Total power requirement 41 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4850x4380x1820 mm Weight 5800 kg Total power requirement 41 kw Kdedpfx Asvz E Htsabsu

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4150x1200x1650 mm Weight 450 kg Total power requirement 1,5 kw Kdjdpfovz Ezwjx Aabsu