Used Double Reel for sale (12,076)

Condition: used, Year of construction: 2012, pressure 260 t distance between columns 360/270 mm stroke 60 mm Stroke rate 50 / min Distance table/ram, max. stroke up, adjustment up 225 mm Table surface area 340 x 380 mm table height over floor 800 mm Bsdpjvuuk Iefx Agksld Ram surface 230 x 220 mm Ram adjustment 12 mm Power capacity 4,5 kW Dimensions (WxDxH) 2,0 x 1,55 x 2,6 m Weight 4,5 t Overhauled in 2012 permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) overhaul in 2012: new clutch-brake combination new control Siemens S 7 new two-hand and foot operation

Condition: used, Year of construction: 2007, pressure 315 t distance between columns 1750 mm stroke 700 mm distance table/ram, max. stroke up, adjustment up 1200 mm table surface area 1600 x 1500 mm pressure of drawing cushion in table 125 t stroke of drawing cushion in table 200 mm die cushion area 1200 x 1400 mm table height over floor 750 mm ram surface 1640 x 1500 mm power requirement 55,0 + 11,0 kW weight 29,5 t Blodpfx Agsvuukboked dimensions (WxDxH) 3,2 x 4,5 x 5,8 m Height above floor 5,1 m year of manufacture 1983 - 2007: modernization of electrical control (Siemens S 7) permitted for manual put-in according to the CE Regulations with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic cutting impact cushioning can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1991, pressure 150 t distance between columns 300 mm stroke 180 mm distance table/ram, max. stroke up, adjustment up 300 mm table surface area 570x180 / 300x410 mm table height over floor 875 mm side window 180 mm ram surface 180 mm speed down 250 mm/s speed up 160 mm/s working speed 6 - 12 mm/s oil volume 250 l power requirement 11,0 kW weight 2,4 t dimensions (WxDxH) 1,3 x 1,3 x 2,4 m year of manufacture 1972 - overhaul 1991 permitted for manual loading according to the German Safety Regulations (UVV §20) Bedovuuiwopfx Agkjld with oil-hydraulic drive No foundation pit necessary as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: used, Year of construction: 1980, pressure 100 t stroke 20 - 200 mm Blsdpfjvuk H Esx Agked no. of strokes 20 - 60 /min distance between columns 1230 mm dayligth (stroke and adjustment up) 650 mm column travel -side 540 mm table surface area 1050 x 750 mm table height over floor 760 mm ram surface 1000 x 750 mm ram adjustment 100 mm power requirement 18,0 kW Weight 20,5 t dimensions of the machine ca. 2,8 x 1,9 x 4,3 mxmxm permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with infinitely variable drive (PIV), pneumatic hydraulic clutch/brake combination (Desch), hydraulic overload protection in ram, semi-automatic stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, motoric circular oil lubrication, two-hand and foot operation as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 2010, pressure 315 t distance between columns 1800 mm stroke 400 mm Distance table/ram, max. stroke up, adjustment up 650 mm Bjdsvuubmspfx Agkjld table surface area 1800 x 1000 mm table height over floor 900 mm die cushion pressure in table 80 t die cushion stroke in table 100 mm Die cushion area in table 1300 x 600 mm side window 600 mm ram surface 1800 x 1000 mm speed down 400 mm/s speed up 300 mm/s working speed 15 - 80 mm/s oil volume 1700 l power requirement 55,0 kW weight 27,5 t dimensions (WxDxH) 3,1 x 2,2 x 4,6 m year of manufacture 1980 - modernization 2010 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table No foundation pit necessary can be offered without putting into operation (WITHOUT operator’s console / screen) or alternatively with new control Siemens S 7-1500 F, new operator’s console / screen and new user interface

Condition: used, Year of construction: 1991, pressure 100 t distance between columns 770 mm stroke 200 mm distance table/ram, stroke up 800 mm Table area 770 x 900 mm table height above floor 850 mm die cushion pressure in table 40 t die cushion stroke in table 200 mm die cushion area in table 600 x 600 mm side window 600 mm ram surface 770 x 900 mm speed down 62 mm/s speed up 350 mm/s working speed 17,5 mm/s Bledpfxjvut Ufe Agked oil volume 700 l power requirement 42,0 kW weight 9,0 t Dimensions (WxDxH) 2,6x 2,0 x 3,8 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table, cutting impact cushioning, depth stop No foundation pit necessary can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F - Video at seller's site before dismantling available

Condition: used, Year of construction: 1990, pressure 500 t distance between columns 1220 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 1000 mm table surface area 1600 x 1200 mm pressure of drawing cushion in table 320 t stroke of drawing cushion in table 150 mm drawing cushion surface in table 750 x 625 mm pressure of drawing cushion in ram 180 t stroke of drawing cushion in ram 100 mm drawing cushion area in ram 750 x 625 mm ram surface 1600 x 1200 mm table height over floor 800 mm speed down 665 mm/s speed up 530 mm/s working speed 34 - 100 mm/s quantity of oil 2000 l Bledpovut Tbsfx Agked power requirement 180,0 kW weight 40,0 t Dimensions (WxDxH) 3,2 x 2,4 x 7,5 m Depth of foundation pit 4,1 m Height above floor 5,55 m YOM 1975 - Overhaul 1990 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table and ram depth of the foundation pit approx. 4,1 m as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1983, pressure 160 t stroke fix 160 mm no. of strokes 30 - 120 /min distance between columns 1190 mm dayligth (stroke and adjustment up) 735 mm column travel -side 600 mm table surface area 1200 x 1000 mm hole in the table 500 x 300 mm table height over floor 900 mm Bedpfevuk E Uox Agkjld ram surface 1000 x 800 mm ram adjustment 125 mm material width 550 mm material thickness 0 - 6,0 mm material cross-cut 1100 mm² feed length 350 mm power requirement 45,0 kW Weight 25,0 t dimensions of the machine ca. 2,3 x 2,1 x 4,7 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive (PIV), hydraulic overload protection in ram, motoric ram adjustment, pneumatic counterbalance in ram, ram interlocking, centralized lubrication, mechanical pincer feed (Haulick, RS 350/550 SL 90) as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1993, pressure 63 t stroke 10 - 80 mm no. of strokes 75 - 400 /min distance between columns 1080 / 920 mm dayligth (stroke and adjustment up) 450 mm column travel -side 300 mm table surface area 1000 x 550 mm hole in the table 700 x 160 mm table height over floor 1080 mm ram surface 900 x 450 mm ram adjustment 80 mm material width 250 mm material thickness 0,3 - 3,0 mm Bsdpfjvut Ixjx Agksld material cross-cut 750 mm² feed length 1,0 – 9999,9 mm power requirement 11,0 kW Weight 9,5 t dimensions of the machine ca. 2,8 x 2,7 x 3,1 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive (PIV), pneumatic clutch/brake combination (make Ortlinghaus), manual stroke adjustment, motoric ram adjustment, motoric circular oil lubrication, pneumatic counterbalance in ram electronic servo-roll feed Kaiser KWV 250

Condition: used, Year of construction: 2004, Pressure 630 t stroke 800 mm distance between columns 2600 mm Distance table/ram, max. stroke up, adjustment up 1500 mm Table surface area 2500 x 1300 mm pressure of drawing cushion in table 300 t Die cushion stroke in table 300 mm Ram surface 2500 x 1300 mm Side window 1040 mm feed down 600 mm/s feed up 360 mm/s working feed 14 - 42 mm/s power requirement 145,0 kW Bljdpfx Aev Svarogkod Weight 85,0 t dimensions (WxDxH) 4,2 x 4,0 x 7,8 m height over floor 6,80 m height beneath floor 1,0 m Demonstration machine from technical university with approx. 920 operating hours! Mint condition! permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on pressure/time and way, upper and lower stroke limitation, light-guard (Sick) on front and back, hydraulic drawing cushion in table with ejector function, hydraulic cutting impact cushioning, mechanical depth stop via 4 motor-adjustable spindles, hydraulic ram interlocking, two-hand operation 2 tool changing consoles, 4 hydraulic ball roller tracks, 4 dampening elements

Condition: used, Electro Dual Screwdriving Unit with Automatic Feed and Pneumatic Double Stroke BÖLLHOFF Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriving unit is equipped with a pneumatic double stroke, operated via Festo valves and cylinders. Additionally, various monitoring systems are installed for full automation. Technical data: Torque of electric screwdriver: 0.6 Nm Gearbox torque: max. 10 Nm Speed: max. 20,000 rpm Rated voltage: 3~ 0-230 VAC Current consumption: max. 7 A (per screwdriver) Pneumatic long-stroke cylinder: 80 mm Pneumatic short-stroke cylinder: 20 mm Total pneumatic stroke: 100 mm Spring stroke for screwdriver: 20 mm Distance between both screwdriving tools: 73 mm - Equipped with a TORX bit T27 or TP27 (presumably for M6 screws) - Requires Bosch Rexroth LT303 power module for operation (power module not included) Screwdrivers 1 and 2 are each composed of the following components: Rexroth type servo motor Rexroth type 0 planetary gearbox Rexroth type 0 encoder Rexroth type 0 straight drive output Component details: Electric screwdriver unit Rexroth Servo motor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current consumption: max. 7 A Rated voltage: 3~ 0-230 VAC Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material no.: 0 Efficiency: 90% Gear ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material no.: 0 Nominal torque: 12 Nm Reduction ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight drive output Rexroth Type: 2GA82 SZ2 1/4" SQ Material no.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Bjdpfshxvu Esx Agkeld Tool holder: 1/4" square Max. torque: 10 Nm Reduction ratio: 1 Weight: 0.2 kg Installation length: 90 mm One 7 m motor connection cable is included in the delivery. Overall dimensions W x H x D: approx. 180 x 920 x 300 mm Total weight: approx. 20 kg Good condition

Condition: used, Electric dual screwdriver unit with automatic feed and pneumatic double stroke, mounted on handling device, handling system, manipulator for screwdriving technology. Screwdriving Unit: BÖLLHOFF / BOSCH REXROTH Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriver unit features a pneumatic double stroke via Festo valves and cylinders. Various monitoring systems are installed to enable full automation. Screwdriver 1 consists of the following components: - Rexroth type servomotor - Rexroth type 0 planetary gearbox - Rexroth type 0 encoder - Rexroth type 0 straight drive head Screwdriver 2 consists of the following components: - Rexroth type servomotor - Rexroth type 0 planetary gearbox - Rexroth type 0 encoder - Rexroth type 0 offset drive head Dimensions (WxHxD): 165 x 1000 x 200 mm Pneumatic long stroke: 30 mm Pneumatic short stroke: 20 mm Screwdriver spring travel: 20 mm Last screws used: M6 x 15 mm Electric screwdriver unit Rexroth Servomotor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm/A Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current draw: max. 7 A Weight: 0.8 kg Gearbox unit Rexroth Bjdpfx Aofx Hyfsgksld Type: 3GE27 SZ3 Material No.: 0 Efficiency: 90% Reduction ratio: i=18.9 Max. torque: 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material No.: 0 Nominal torque: 12 Nm Reduction: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight drive head Rexroth Type: 2GA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction: 1 Weight: 0.2 kg Installation length: 90 mm Offset drive head Rexroth Type: 2VNA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction: 1 Weight: 0.6 kg Installation length: 153 mm Handling system: JÄGER HANDLING Type: Handy-flex 300 Horizontal movement: 400 mm Vertical movement: 450 mm Load capacity: max. 14 kg Handyflex reach: 250 to 650 mm Handyflex reach (swung out): max. 860 mm Swivel radius at full extension: max. 360° Guide column vertical: Ø 30 mm Guide columns horizontal: Ø 20 mm - Balancer for vertical movement - Adjustable load capacity - Adjustable stop for limiting swivel radius Dimensions (L x W x H): approx. 1150 x 650 x 1400 mm Total weight: approx. 90 kg Good condition Without the blue steel pallet as base plate Blue steel base plate is not included in the scope of delivery.

Condition: used, Double-column hydraulic press NEFF Type RHS 125 Z Hydraulic drawing press Machine No. 3973 Year of manufacture 1983 Bjdpfxoguvtls Agkeld Pressing force: 125 tons Column gap: 1050 mm Lateral column clearance: 550 mm Table size: 1000 x 800 mm Ram size: 1000 x 800 mm Ram stroke: 350 mm Installation height max.: 750 mm Table height above floor: 960 mm Blankholder force: approx. 12 tons at 105 bar Blankholder stroke: 100 mm Through-hole in table: Ø 202 mm Rapid advance speed downwards: approx. 360 mm/sec Rapid advance speed upwards: approx. 360 mm/sec Working speed: approx. 36 mm/sec Oil tank capacity: approx. 1000 liters Main pump motor power: 22 kW Control pump motor power: 4 kW Control pump motor power: 2.2 kW Electrical connection: 400 Volt, 50 Hz - Hydraulic blankholder cushion underneath the table with a through-bore in the table top Ø 202 mm - Precise 4-column guide on the ram corners - Infinitely variable pressing force adjustment - Electrically adjustable fixed stop via hydraulic motor - Cutting shock damping - Two-hand control panel for stroke release on the press - Free-standing control cabinet (1600 x 500 mm) - Documentation such as operating instructions, electrical wiring diagram, and PLC program printout available Required space L x W x H: 2600 x 2400 x 4270 mm Weight: approx. 14 tons Good condition

Condition: used, Machine not operational – control system not running Special price Double-column hydraulic press ALPHA TEC -- ALPHATEC Type RPS 5000 Serial No. 300487 Year of manufacture: 2006 Pressing force: 500 tons Column gap front and rear: 2520 mm Table surface: 2500 x 2500 mm Ram surface: 2500 x 2500 mm Ram stroke: 600 mm Installation height max.: 600 mm Table height above floor: approx. 900 mm Tank capacity: approx. 1000 liters Ram retraction force: approx. 22 tons Adjustable approach speed: 100-800 mm/s Pressurization to 5000 kN: approx. 0.7 sec. Return speed: approx. 300 mm/s Main motor power: 75 kW Control pump motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - 8-position flat guide for the ram - Hydraulic ram locking at TDC - Freestanding control cabinet (200 x 50 cm) - Siemens PLC control S7-314 - Operation via Siemens OP 170-B (5.7”) Bledpfx Aodzqptegkjd - Two-hand control desk, freestanding - Floor-level installation - Table plate 2510 x 2530 x 135 mm (approx. 6700 kg) - Central lubrication - Operating manual with circuit diagrams Required space (L x W x H): 372 x 260 x 460 cm Required space for horizontal transport (L x W x H): 460 x 372 x 260 cm Weight: approx. 50 tons The machine was used for straightening heated steel flanges. From insolvency – in good condition.

Condition: used, Double-sided grinding and polishing stand MEYER type SMP Machine. No. 848 Year of construction 1963 shaft diameter 50 mm grinding wheel support Ø 305 mm wheel distance 1470 mm grinding- polishing wheel diameter max. 800 mm working height 550 mm speed 710 / 800 / 950 rpm. Drive power 2x 3 kW Blsdedzqmhjpfx Agked mains connection 380 Volt, 50 Hz. - two drive motors for each working side separately - star-delta switch for each drive motor separately - speed change by shifting the drive belts - dust exhaust flange Ø 100 mm - mounted are 2 pieces corundum grinding wheels with 40 mm width, Ø ca.560 / 480 mm space requirement L x W x H 1700 x 1200 x 900 mm weight 850 kg good condition

Condition: used, Double-column hydraulic press SCHÖN Type SH 25 Machine no.: 4453 Year of manufacture: 1999 Pressing force: 25 tons Column width: 500 mm Lateral column clearance: 120 mm Table surface: 440 x 320 mm Table opening: Ø 175 mm Ram surface: 360 x 220 mm Clamping pin bore: Ø 40 mm Max. ram stroke: 100 mm Bjdpfx Agsw A Amrekjld Max. installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Connection voltage: 380 V, 50 Hz Equipment: - Safety light curtain SICK, type FGS 300-11 - Two-hand operation - Stroke counter - Rapid and working stroke - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop - Pressing force regulation - Adjustable pressing time 1–10 s (pressure holding time) - Adjustable return stroke speed - Blow-off device electrically pre-wired, without air valve - Manual hydraulic tool safety, adjustable via handwheel Dimensions (L x W x H): 1300 x 1200 x 2200 mm Weight: approx. 1200 kg Good condition

Condition: used, Air operated double diaphragm pump DEPA Type DH40-FA-ZRT Air operated diaphragm pump, double pump Serial No.: B1802498 Year of manufacture 09.05.2018 Temperature: max. 130°C Size: 40 Grain size: max. 16 mm Suction height: approx. 2 m Suction height product filled: approx. 9 m Operating pressure: max. 7 bar air connection: 3/8" suction connection: 1 1/2" Blodpjib D H Usfx Agked pressure connection: 1 1/2" - self-priming - aluminum housing - Diaphragm plate made of stainless steel - Diaphragm made of nopped E4® PTFE compound - Balls made of PTFE - Ball seats made of stainless steel Space requirement: L x W x H: 370 x 270 x 450 mm own weight: 15 kg very good condition

Condition: used, Double column hydraulic press SMG type HBP 200 - 2000 / 2000 make no. 7.4117 year of construction 1986 - rebuild 2000 pressure force 200 ton. Stand passage front 2050 mm column passage sideways 2030 mm table area 2800 x 2000 mm ram area 2000 x 2000 mm ram stroke 700 mm installation height max. 1850 mm Table height above floor 750 mm ram retraction force 33 ton. Rapid feed speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety distance 230 mm Motor power main motor 75 kW Motor power control pump 11 kW Mains connection 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots at the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking at TDC - Measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS SPS S7 - adjacent switch cabinet - 2-hand control panel adjacent - ground level installation - central lubrication - Operating instructions with circuit diagrams Space requirement of the press standing L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space requirement for horizontal transport L x W x H 5900 x 3250 x 2950 mm weight 38 ton. The machine was used as a production press at Volkswagen until 2000. From 2000 the machine was used as a tool testing press in a tool shop. Bjdsdzp Tcspfx Agksld good condition

Condition: used, Drill grinding machine GÜHRING type SS 15 make no. 909 year of construction approx. 1977 drill diameter max. 40 mm grinding wheel diameter right 300 mm grinding wheel diameter left 250 mm grinding wheel width 40 mm grinding spindle speed approx. 2800 rpm motor power approx. 2,2 kW Mains connection 380 Volt, 50 Hz - center angle infinitely variable - Pointing device - gear motor for height oscillation in front of the cup wheel - diamond dressing holder - various drill bit holders - coolant device space requirement L x W x H 1200 x 950 x 1550 mm Blsdpedzp Tbjfx Agkod weight approx. 1150 kg

Condition: used, NC Multi-Blade - Double-Blade Saw for Light Metal MIKSITZ Year of manufacture: 1991 Circular saw, aluminium circular saw, table circular saw, mitre saw Bljdedzp Snepfx Agked For cross-cutting and notching aluminium profiles Saw blade travel: 500 mm Max. cutting height: 100 mm Saw blade speed: approx. 5000 rpm Installed saw blade diameter: 300 mm Max. saw blade diameter: 400 mm Motor power: 5.5 kW Power supply: 400 Volt, 50 Hz Table size: 1100 x 1100 mm Table opening: 300 x 1100 mm Working height: approx. 1100 mm Tool holder: SK40 - Several saw blades can be mounted on a single work shaft with double-sided bearing - A long SK40 arbor serves as the work shaft - Belt drive between the drive motor and saw shaft - Table height adjustable via hand crank (to set cutting depth) - Fixtures and stops can be mounted on the table - Saw blade movement via ball screw spindle with servomotor - Single-axis NC control for the cutting movement, LENORD + BAUER type GEL 7541.0000 - Separate control cabinet Space requirement (L x W x H): 1800 x 1600 x 1700 mm Weight: approx. 1100 kg

Condition: like new (used), Year of construction: 2022, x-travel 2500 mm y-travel 3500 mm z-travel 1500 mm Control HEIDENHAIN TNC 640 c-axis +-360 ° milling head -swivable ° milling head swivable ca. +-360 ° table dimension - longitudinal 2500 mm table dimension - cross 3500 mm table load 6 t/m² coolant IKZ 70 bar Bodpfovwgtyox Agksld Feed speed 60 m/min. spindle turning speed range 24000 U/min tool taper HSK-A63 milling spindle motor S6(40%/2 min) 41 kW max. torque on the spindle S6(40%/2 min) 49 Nm milling spindle motor S1(100%/2 min) 34 kW max. torque on the spindle S1(100%/2 min) 39 kW tool change unit 60 Pos. weight of the machine ca. 74 t dimensions of the machine ca. 4 x 7.5 x 5.4 m This thermosymmetrical, ergonomic, universal ZIMMERMANN FZU32 portal milling machine is in mint condition and available immediately. DESCRIPTION: The FZU32 is a remarkably compact 5-axis portal milling machine for machining aluminium machining of aluminium, fibre composites, plastics, ureol and steel. steel. Thanks to the particularly rigid, newly developed centre-guiding gantry, we can meet the increasing requirements in model, tool and mould making. mould making. This thermo-symmetrical design makes the FZU32 less susceptible to adverse environmental conditions.

Condition: excellent (used), Year of construction: 1995, x-travel 14000 mm y-travel 5000 mm z-travel 1500 mm w-axis 3000 mm column daylight 4000 mm column: max. dist. table - spindle nose 4500 mm workpiece weight 100 t table dimension - longitudinal 9000 mm table dimension - cross 3000 mm spindle taper ISO SK 50 spindle turning speed range 2-2500 U/min spindle motor 113 kW spindle diameter 200 mm max. torque on the spindle 9500 Nm feed in x - axis 1-10000 mm/min feed in y - axis 1-10000 mm/min feed range Z-direction 1-10000 mm/min rapid traverse 20000 mm/min height over floor 8600 mm control SIEMENS 840C weight of the machine ca. 360 t ATTACHMENTS angular milling head yes autom. tool clamping yes ball spindles yes guideway covers yes coolant unit yes high pressure cooling syst. (through spindle) yes closed cabin yes chip conveyor yes TECHNICAL DESCRIPTION 2 portal milling centres, each with 3 table pallets 9000 x 3000 mm: - Tool changer with 420 tools - Head pick-up system - Video monitoring via camera - High pressure lubrication unit for inner cooling 70bar Blodpfxjvwgm Ho Agked AVAILABLE HEAD UNITS: - Fixed angle head HS800C600 105 Kw 600 long - Fixed angle head HSD350C850 50 Kw 850 long - Fixed angle head HSD 40C880 12 Kw 880 long - Fixed angle head HSD 190C1000 30 Kw 1000 long - Vertical spindle unit VS800C 105 Kw 900 long - Universal spindle unit USIO40C 20 Kw B-axis rotatable at 1° at a time - Angle spindle unit SO800C905 - 22,5° fix - Angle spindle unit HSE1200CS -25° fix - Universal spindle unit (fork milling) USP475C 75 Kw 1/2° Hirth --> 1.350 1/min , B-Achse 0,5 Grad Hirth One additional drilling extension SE 350C plus 1 SE500C. DESCRIPTION OF CONDITION In 2011/2012 these 2 identical machines were retrofitted The milling length was extended to 14meters and an automatic changing system for table pallets was installed. Both machines can be seen under power by prior appointment.

Condition: good (used), functionality: fully functional, year of last overhaul: 2022, input voltage: 400 V, DGUV certified until: 03/2027, overall weight: 400 kg, total width: 1,000 mm, total length: 1,250 mm, input frequency: 50 Hz, input current: 16 A, electrical fuse: 16 A, Dough mixer, kneader Werner & Pfleiderer Double-cone kneader WP DK 100 Removable bowl trolley Bodpfx Aeu Uakzsgkeld Robust technology Flour dust cover Connection 400V, 16A CEE plug Used machine More bakery machines in stock!

Condition: used, Year of construction: 2004, grinding wheel diameter 660 mm Control Siemens 840D work piece width min. 5 / max. 180 mm max. workpiece diameter 200 mm weight of the machine ca. 15,0 t dimensions of the machine ca. L 3,1 x B 4,0 x 2,7 m In our opinion, the machine is in good used condition. The machines were used for the production of connecting rods. Two machines are available. One machine is suitable for pre-grinding and one for regrinding. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as Bsdpfoxq R Haex Agkold subject to prior sale!

Condition: excellent (used), CATALOGUE NUMBER 7065 TECHNICAL DATA - Max. saw blade diameter: 300 mm - Spindle diameter: 30 mm - Blade guards: 2 pieces - Pneumatic cutting (up/down blade movement) - Saw units adjustable at 45° - Manual spacing adjustment of the saw units - Min. cutting length at 90°: 220 mm - Max. cutting length at 90°: 2820 mm - Cutting width: 110 mm - Cutting height at 90 degrees: 90 mm - Pneumatic clamps: 2 pieces - Foot switch - Material support - Main motor: 2×1.6 kW - Dimensions (L/W/H): 3620x1100x1250 mm - Weight approx. 500 kg – Unpainted – Tilting saw units Bedpfxox Sq E Io Agkold – Used saw, in very good condition Net price: 13,900 PLN Net price: 3,300 EUR depending on the exchange rate 4.2 EUR (Prices may change with higher fluctuations)