Used Dough Dividing for sale (1,555)

Condition: used, Year of construction: 1994, - Cutting length: 5800 mm - Cutting width: 5150 mm - Main saw power: 11 kW - Scoring saw power: 1.5 kW Panel dividing saw Manufacturer: Panhans Type: 693 / EURO 30 Year of manufacture: 1994 Technical data: - Cutting length: 5800 mm - Cutting width: 5150 mm - Main saw power: 11 kW - Scoring saw power: 1.5 kW - Rear support table (divided): 1 piece, 370 x 4910 - Rear support beams (with rollers): 9 pieces, 40 x 4910 mm - Front sliding support table (with 3 infeed rollers on the end): 3 pieces, 600 x 1800 - Miter table: adjustable - Air cushion miter table: adjustable - Angle table: left - Air cushion table left: up to 2020 mm - Clamping jaws: 7 pieces, floating Scoring jaws: 4 pieces Special accessories: Color screen, graphics, online I Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding. Rcodpfx Aozuy D Aobpsf

Condition: used, Year of construction: 2019, - Cutting length: 4300 mm - Cutting width: 4300 mm - Main motor: 9 kW Panel dividing saw Manufacturer: Otto Meyer Type: PS80P Year of manufacture: 2019 Rcedpfx Abjzuy Dpepjf Technical data - Cutting length: 4300 mm - Cutting width: 4300 mm - Main motor: 9 kW - Optimized feed speeds of the main saw thanks to an additional frequency converter - Label printer - Automatic electronic clamp detection for recognizing the panel corners Note: The technical data and descriptions are a verbatim copy of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2005, - Saw motor: up to 19 kW at 2930 rpm, 50 Hz - Scoring motor: 1.5 kW at 2830 rpm, 50 Hz Panel dividing saw Manufacturer: Schelling Type: FM-H 430 Year of manufacture: 2005 Technical data Infeed speed: Forward: 0-25 m/min Reverse: 80 m/min Saw feed speed: Forward: up to 120 m/min Reverse: 120 m/min Saw motor: up to 19 kW at 2930 rpm, 50 Hz Scoring motor: 1.5 kW at 2830 rpm, 50 Hz Clamping opening: 113 mm Cutting straightness: +/- 0.1 mm over a cutting length of 3 m Dimensional accuracy: +/- 0.2 mm length, +/- 0.2 mm width, +/- 0.3 mm diagonal Main saw blade: Diameter: 450 mm Inner bore diameter: 30 mm Saw blade thickness: 4.4 mm Number of teeth: 72 Scoring blade: Diameter: 200 mm Rjdpfjzuy Diox Abpscf Inner bore diameter: 20 mm Saw blade thickness: 4.2 / 3.5 mm Number of teeth: 36 Edge scoring blade: Diameter: 220 mm Inner bore diameter: 20 mm Saw blade thickness: 4 / 4.8 mm Number of teeth: 2 x 24 Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2000, - Cutting length: 3300 mm - Saw blade overhang: 125 mm - Main saw: 18 kW - Scoring saw: 2.2 kW Rjdpezuy A Sjfx Abpscf Panel dividing saw Manufacturer: Holzma Type: HPL 23/X/33/22/30/L Year of manufacture: 2000 Technical specifications - Cutting length: 3300 mm - 3 air cushion tables - Lifting table: 3300 x 2200 mm - Saw blade overhang: 125 mm - Main saw: 18 kW - Scoring saw: 2.2 kW - CADMATIC control system - CADMATIC control system Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: used, Year of construction: 1999, - Usable cutting length: 1600 mm - Saw blade overhang: 100 mm - Panel thickness: 6 - 22 mm (+/- 1 mm tolerance per panel and within a panel) Panel dividing saw with infeed table and destacking device Manufacturer: Giben Type: Prismatic 2 h100 SPT Year of manufacture: 1999 Technical data - Usable cutting length: 1600 mm - Saw blade overhang: 100 mm - Clamping chuck opening: 117 mm - Working height: 950 mm - Lifting table dimensions: 1600 x 2700 mm - Max. stack height: 620 mm - Dimensions: 2444 x 1220 mm, 2500 x 1250 mm - Panel thickness: 6 - 22 mm (+/- 1 mm tolerance per panel and within a panel) High-speed saw carriage - 2 guide shafts: 40 mm - Saw carriage drive via frequency-controlled motor - Feed speed: 1 - 100 m/min - Return speed: 100 m/min Rodpfxjzuyywo Abpscf Adjustment of the saw carriage speed from the control panel. Automatic cutting length control according to the panel dimensions - Scoring saw speed: 5035 rpm - Carbide-tipped saw blade speed: 3760 rpm - Main saw motor power: 11 kW - Scoring saw motor power: 2.2 kW - Main saw blade: 400 mm - Main saw spindle: 75 mm - Scoring saw blade: 215 mm - Scoring saw adjustment from the outside in stepped increments to: 0.025 mm - Changing the main saw and the scoring saw via a quick-release system (pneumatic) Sliding table - Support table in the sliding table area with free-running roller rails - Top-mounted sliding table with 3 floating clamping chucks with patented, foldable lower clamping chuck fingers - Sliding table drive via servomotor - Drive torque: 6.5 Nm - Feed speed: 1 - 60 m/min - Return speed: 60 m/min - Cable routing via drag chain - 2 front aligners Automatic infeed via lifting table - Dimensions: 1600 x 2700 mm - 4-column spindle lifting table with 12 free-running roller groups - Automatic package height counting when lifting the panels via control - Min. panel dimensions: 2000 x 1200 mm - Max. stack height without pit: 620 mm - Max. load: 12 t - Infeed height: 330 mm Support table - 2 pcs support table with PVC surface 2000 x 510 mm Machine control G-Drive 1D Extraction - 1 extraction port on the pressure bar: 115 mm - 1 extraction port on the lower side of the machine bed: 200 mm - The chip extraction takes place directly at the saw unit via sheet metal ducts into a chip duct arranged along the saw line, which is sealed with flexible rubber lips. Performance parameters - Average cycle time/saw cut: approx. 25 s Quality - Cutting accuracy: +/- 0.15 mm is guaranteed (for straight panels) - Angularity: +/- 0.15 mm/m Note: The technical data and descriptions are a transcript of the original order confirmation. Data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2011, Panel dividing saw Manufacturer: Selco / Systraplan Type: WNTR 710 Year of manufacture: 2011 with SYSTRAPLAN supporting table Technical data Cutting length: 4300 mm Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding. Rsdpfozuyxyex Abpecf

Condition: used, Year of construction: 2011, - max. panel width 4500 mm - max. panel length 2200 mm - max. saw blade projection 127 mm - main saw 18.5 kW - scoring saw 2.0 kW - with lifting table used panel dividing saw Manufacturer: Selco Type: WNTR 730 Year of manufacture 2011 Technical data: Max. panel width 4500 mm Max. panel length 2200 mm Max. saw blade projection 127 mm with lifting table 9 grippers on the sliding fence Flexible grippers for positioning via NC Rcedezuyxmspfx Abpjf Max. feed rate 130 m/min 1 saw unit with positioning via NC max. tool diameter 470 mm Motor power 18.5 kW Scoring unit max. blade diameter 200 mm Motor power 2 kW Quick-change device QUICK CHANGE SYSTEM Max. feed rate 185 m/min Machine programming software OSI Barcode label printer Barcode scanner Total installed power 44 kW Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2022, - Work surface: 3800 x 2200 mm with rear lifting table - Maximum cutting length: 3800 mm - Saw blade overhang: 108 mm - Maximum gripper opening: 100 mm - Minimum panel size: 1830 x 915 mm - Maximum panel size: 3660 x 2200 mm - Maximum stack height: 630 mm - Minimum thickness on the lifting table: 10 mm - Maximum lifting table stroke: 985 mm - Load capacity of the lifting table: 5 t Panel dividing saw Manufacturer: Biesse Type: Selco WNT 630 Year of manufacture: 2022 Technical data - Work surface: 3800 x 2200 mm with rear lifting table - Maximum cutting length: 3800 mm - Saw blade overhang: 108 mm - Maximum gripper opening: 100 mm - Minimum panel size: 1830 x 915 mm - Maximum panel size: 3660 x 2200 mm - Maximum stack height: 630 mm - Minimum thickness on the lifting table: 10 mm - Maximum lifting table stroke: 985 mm Rcsdozuyl Tjpfx Abpjf - Load capacity of the lifting table: 5 t The machine is almost new and has only been used for a few months. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: used, center height: 210 mm, with tailstock and 3-jaw chuck, 230 mm, center height 210 mm, bore 50 mm. Rcedpfx Abjzw Uhbepef

Condition: good (used), Year of construction: 2009, Koenig Artisan SFC Divider - Used - Year of manufacture: 2009 - Electronic control - For ciabatta, rustic rolls, bread, and other products made with loose dough Rodozvwwpjpfx Abpscf - Production machine - Inspected and cleaned - Collection from the warehouse / shipping option available - Price on request

Condition: new, Product driven flow divider The filling flow divider can be used for several kind of products like meat, fish, pasta products, sauces and salads. Includes 1 nozzle per exit (round, square, triangular or rectangular) with a maximum outer diameter of 40 mm Product temperature up to ± 80 °C With universal connection Redpozvcqnjfx Abpocf With pneumatique knife 3 exits belt width 25 cm With support frame in height adjustable New

Condition: used, Year of construction: 2009, Overview This LM S.p.A. multiline divider is a lane-dividing system for bottle conveying, built in 2009 by LM S.p.A. (Modena, Italy). It sorts a single-lane bottle stream into up to 4 lanes and is offered together with a bottle conveyor system manufactured by GEA Procomac - 4 lanes with each approx. 10m multiline conveyors plus the divider unit. The system is still installed and under power in a German water and soft-drinks bottling plant, remains in production until 30 September 2026, and can be visited in operation. Technical data - Manufacturer of multiline divider: LM S.p.A. (Modena, Italy) - Manufacturer of bottle conveyors: GEA Procomac - Year of manufacture: 2009 - Machine type: multiline divider with bottle conveyor system - Lane division: up to 4 lanes - Capacity: min. 12,500 bottles per hour - Conveyor length: approx. 4 lanes each 10m (multilines) plus divider Scope of delivery - LM S.p.A. multiline divider - GEA Procomac bottle conveyor system - Drive units, guide railings and safety guards as installed Rcodpozuc Rxsfx Abpof Condition The equipment is in very good condition. It is still installed and under power and remains in production until 30 September 2026; operation can be demonstrated on site. Availability Available from 7 October 2026. The equipment will be dismantled and loaded onto the buyer's trucks by the seller between 7 and 10 October 2026. Location: Germany.

Condition: used, Year of construction: 2023, Cutting area: 5600x5600 mm 1x Gabbiani G 3 130 (56) - High-performance panel dividing saw 1x Compact label printer Rcodpjxlvktefx Abpjf 1x "eye-M EVO" control console 1x Human-Machine Interface (HMI) software MAESTRO ACTIVE 1x Maestro pattern 1x High-performance, fixed air cushion table with guide, 2500x600 mm, with infeed rollers 3x High-performance, mobile air cushion table - 2500x600 mm, with infeed rollers 1x Double, lateral, automatic aligner with motor drive 1x Foot switch for START/STOP of the working cycle 1x Setup for grooving with height adjustment of the saw blade via the control system 1x "Autosetting" device on the saw carriage for cutting length/width 1x Main saw blade motor 25 HP (18 kW) 50 Hz with star-delta starter 1x Quick clamping of the saw blades with mechanical flanges "AKE" 1x Selective collet chuck (area 0 - 1600 mm) 3x Additional double collet chuck 4x Additional collet chuck with single finger 1x Compact office label printer 1x Cut editor 1x Maestro optiwise - Advanced - No. 1 license 1x Maestro connect: Service agreement for 1 year (including "plug&play" gateway kit) 1x Base 1x MACHINE LANGUAGE: German 1x PC LANGUAGE: German 1x SPEC01 Special version 01 1x European safety regulations (CE marking) including 123 hours of on-site commissioning (within Germany) (daily working hours are 8 hours including travel time). including 1 day of online training MAESTRO OPTIWISE PRO (as needed) including MAESTRO CONNECT 1 year including MAESTRO PATTERN IMPORT (255€ free)!!! FULL MANUFACTURER'S WARRANTY IN THE FIRST YEAR !!! Storage location:

Condition: used, Year of construction: 2012, Blume transfer roller conveyor slider 90° 1880-610-580 RA2045 Make: Running direction: both directions Roller width (RB): 580 mm Nominal/outer width frame (NB): 610 - 670 mm Length: 1880 mm Roller distance: 75-80 mm Ejector side: both sides Motor: drummotor Interroll 24V Lifter: pneumatic cylinder Rsdpfx Aera Hp Robpecf Currently set high: 875 mm Conveyor speed: freely adjustable with frequency converter between 0.275 and 0.667 m/s Optionally available: Light barrier scope of delivery: supports For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Slicer Treif -Model: DIVIDER Orbital+ -Power: 7.5 kW -Year of manufacture: 2014 -Capacity: up to 1200 cuts/min Rjdpjzt Sdxofx Abpecf -Max. slice thickness: 0.5–25 mm -Max. product length: 850 mm -Belt width: 420 mm -Includes a knife sharpener -Knife sharpener model: HS DIVIDER ORBITAL -Outer dimensions of the sharpener: 580 x 640 x 400 mm -Sharpener year of manufacture: 2015 -Power supply: 380V 3Ph 50Hz -Suitable for slicing: meat, cheese, fish -Made of stainless steel -Outer dimensions: 3200 x 1200 x 2350 mm -Weight: 850 kg -Condition: Used in very good condition, ready to work

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 2026, warranty duration: 6 months, input voltage: 400 V, year of last overhaul: 2026, DGUV certified until: 09/2027, working width: 300 mm, conveyor belt width: 320 mm, type of input current: three-phase, total height: 1 mm, Winding machine Model: MK 30 Dough weight up to approx. 250 grams Wrapping tape width 320 mm Plastic-coated feed rollers for all sticks such as Kornspitz and pretzel sticks, Universal winding machine Rsdpjhfhpvsfx Abpscf Stainless steel version Input shaft with safety edge DGUV V3 tested Mobile croissant wrapping machine Connection 400V, 1 kW, 16A-CEE plug Used machine overhauled with 6 months warranty Visit our large bakery machines warehouse!

Condition: excellent (used), Year of construction: 2012, Used WP Kemper Quadro Filius divider Compact dough divider for automated production of square and rustic rolls. Technical data: Capacity – 1,400–4,000 pcs/h, Number of rows – 1–6, Weight range – 25–360 g, Divider dimensions (W x H x D) – 745 x 1801 x 2770 mm, Rcedpfxsw Idztj Abpof Versatile production on a small footprint, Stainless steel housing, Set of cutting rollers, Adjustable flour dusting on the dough band.

Condition: excellent (used), 460 USED Kemper Spiral mixer. TECHNICAL DATA: - Flour capacity: 125 kg, - Dough capacity: 160 kg, - 2 speeds, - Power: 5.5 - 8.5 kW, 380 V, 3 phase. EXTERNAL DIMENSIONS (in cm) - W: 140, - L: 85, - H: 148. Rcedezlrv Ejpfx Abpsf Paid options available: transport of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: excellent (used), 459 USED Kemper Spiral mixer. Rcodpfxjzlrtdo Abpsf TECHNICAL DATA: - Flour capacity: 125 kg, - Dough capacity: 160 kg, - 2 speeds, - Power: 5.5 - 8.5 kW, 380 V, 3 phase. EXTERNAL DIMENSIONS (in cm) - W: 140, - L: 85, - H: 148. Paid options available: transport of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: excellent (used), 458 USED Kemper Spiral mixer. TECHNICAL DATA: - Flour capacity: 125 kg, - Dough capacity: 160 kg, - 2 speeds, - Power: 5.5 - 8.5 kW, 380 V, 3 phase. EXTERNAL DIMENSIONS (in cm) - W: 140, - L: 85, - H: 148. Rsdezlrnzopfx Abpecf The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Year of construction: 1975, condition: used, functionality: fully functional, We are offering this used, unidentified pastry forming machine, manufactured in 1975, for sale. Manufacturer: Model: Rcedszh N A Ijpfx Abpef Year of manufacture: 1975 Condition: used Category ID: 9 Machine type: Pastry forming machine In addition, 5-6 trolleys including matching trays for the pastry forming machine are included. Furthermore, there are 6 different rollers in excellent condition. The machine is very old, but as you can see in the video, it runs perfectly. It is ideal for a small bakery that wants to produce some excellent baked goods very efficiently. If you have any questions or need more information, please send us a message or call us.

Condition: good (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, electrical fuse: 16 A, opening width: 30 mm, type of input current: three-phase, Fritsch Rollfix 3WK 600 sheeter for all types of dough for sheeting and lamination Rodpfx Abjzq Uw Ajpscf roller width 600 mm roller gap 0.3 to 30 mm mobile dough sheeter with hand and foot control connection 400V, 16A CEE plug used machine

Condition: good (used), functionality: unexamined, input voltage: 400 V, input frequency: 50 Hz, electrical fuse: 16 A, opening width: 45 mm, type of input current: three-phase, Fritsch Rollfix 60W/650E sheeter Rcsdpfx Aszq Uwvsbpsf Computer control for all types of dough for sheeting and shaping Pressure plate for long-rolled dough pieces Stainless steel construction up to 650 mm product width Connection: 400V, 16A CEE plug Used machine

Condition: good (used), 437 USED Peelboards, Trays, Dough Proofing Boards Dimensions: 58x78 or 58x98. Rodpfx Aozkyrxsbpocf Paid options available: transport. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: excellent (used), Year of construction: 2017, 378 USED Vemag bread divider, model Robot 500 - Filler. TECHNICAL DATA: - Weight range: 5 g - 30 kg - Capacity: 2500-2800 pcs/h depending on the weight. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Rcodpfoy Szavex Abpef Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices