Used Dough Production for sale (16,804)

Condition: used, Tenoning spindle 1 St. Number of milling agregates 1 St. Spindle diameter 40 mm Small window production consisting of: W. ----- 1) Haberkorn FZS1 slotting machine 2) Okoma SF3F table milling machine 3) Oertli tool for the Haberkorn and Okoma machines Wooden windows 1 set IV 68/78/88 and 1 set wooden aluminium windows IV 68/78 built in 2011 4) Götzinger OBM Plus corner bearing and olive drilling machine, Maco MultiMatic fittings (fitting type can be changed with additonal costs on request!)!) ----- Technical manufacturer's description: - Haberkorn FZS1 slotting machine with automatic feed, -stepless height adjustment D 40 mm Cutting-to-length saw: -Spindle arrangement: top -Three-phase motor: 3 kW -Spindle diameter: 30 mm -Speed: 2800 rpm -Saw blade diameter: 400 mm -Automatic brake with speed monitoring -Horizontal pneumatic positioning, manually adjustable -Protective and extraction hood with extraction nozzle diameter: 100 mm Slotting spindle D 40 mm: -Power: 7.5 kW Nsdpfxsxa Hi Ns Adwskt -Speed: 4200 rpm -Working length: 252 mm -Max. tool diameter: 340 mm -220 mm stroke, infinitely variable height adjustment via precision ball screws -Protective cover and extraction hood with extraction nozzle diameter: 180 mm -Automatic brake with speed monitoring Studio table: -Swivel range +/- 65 degrees -Automatically changing counter blade (programmable) -Pneumatic clamp -High-precision electric degree display -Automatic length compensation -Counter blade for every angle setting in the cutting plane Special equipment: -Laser for workpiece positioning -Pneumatic saw position -Length stop LA 2500 mm + 1850 extension ----- 2) Okoma SF3F table milling machine with lifting spindle, 3 tools -Suction connection nozzles 2 x 120 mm -Spindle length 270 mm -Counter stop ruler with fine adjustment and turret head -Triple stroke, cycle height max. 90 mm -Glass bead cutting saw with protective and extraction hood 80 mm diameter -8 roller feed device with stand and hold-down arm, required for glass bead cutting saw setup -Pneumatically controlled pouring device for edge gear, speed 6000 rpm -2x 3kW motor -Mounting diameter 30 mm ----- 3) Oertli tool for Haberkorn and Okoma machines -1 set of wooden windows IV 68/78/88 -1 set of wood-aluminium windows IV 68/78 Sale of tools in the condition, scope and with accessories as available in our warehouse. Note on window cuts, tool drawings, tool system listings: Engelfried does not guarantee that the tools actually available correspond to the systems mentioned and drawn. ----- 4) Götzinger OBM Plus corner bearing and olive drilling machine -Corner and shear bearings + handle olive drilling -Vertical drilling unit with: -Quick-change drill head device -Pneumatic feed via foot valve -1x olive drill head 24 mm -1x corner bearing double head -Maco MultiMatic fitting -1x adjustable folding stop on the left with 6 stops -1x adjustable folding stop on the right with 6 stops -1x machine stand complete with shelf -220/400 V, 60 Hz, 1.3 kW -1x roller conveyor approx. 1 m long with 2 rollers -1x roller conveyor approx. 1.5 m long with 3 rollers ----- Price of the above machines on request! Plus packaging and shipping -----...

Condition: used, Year of construction: 1997, travel distance X-axis: 1,300 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Mazatrol, controller model: M-Plus, overall weight: 36,000 kg, tool weight: 2,200 g, CNC Horizontal Machining Centre with Palletech Table size 800 x 800 mm. Table NCRT. Number of pallets 14. Movement x-Axis 1300 mm. Nsdpfxeyddfds Adwokt y-Axis 1100 mm. z-Axis 1000 mm. Table indexing 0,001°. Number of tools in magazine 237 pieces. Maximum spindle speed 35-7.000 min. Tool taper DIN 69871A-50. CNC control M-plus If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Product supply bunker “Heckmann” with hopper ± 2.000L with driven shafts with fingers to separate the product input height: ± 3,400 mm 2 x 3kW, 1500 / 16 rpm dimensions (l x w x h) : ± 2.700 x 2.600 x 3.400 mm + Elevating spiral screw “Heckmann” all stainless steel Nkodpfx Ajydk Ifedwjt discharge height: ± 5.800 mm diameter of the screw : ± 600 mm length of the screw : ± 8.500 mm dimensions hopper: ± 1.300 x 1.000 mm dimensions: (l x w): ± 9.200 x 1.600 mm safety grille 5.5kW, 1500/20 rpm

Condition: new, functionality: fully functional, Year of construction: 2025, A sand aggregate or gravel production plant is a facility where raw materials like sand, gravel, and other aggregates are processed to create various products used in construction and other industries. These facilities typically involve a series of processes to transform raw materials into the final products. Here is a general overview of the key components and processes involved in a sand aggregate or gravel production plant: 1. Mining and Extraction: - The process starts with the extraction of raw materials from quarries or mines. Heavy machinery such as excavators, loaders, and bulldozers are used to remove the raw materials from the earth. 2. Crushing and Screening: - The extracted raw materials often need to go through crushing and screening processes to reduce their size and separate them into different grades. - Crushers break down large rocks into smaller pieces, and screens sort the particles based on size. 3. Washing: - Washing is a common process to remove impurities such as clay, silt, and dust from the raw materials. This is particularly important for sand and gravel used in construction. 4. Grading and Sorting: - After washing, the materials may go through grading and sorting processes to separate them into different sizes and qualities. 5. Storage and Stockpiling: - Processed materials are often stored in stockpiles for further use. Adequate storage facilities are necessary to manage different grades of materials. Nkjdpjq Nia Iofx Adwjt 6. Conveying and Transportation: - Conveyor systems are used to transport materials between different stages of the production process. Transportation methods, such as trucks or conveyor belts, are used to move the final products to distribution points. 7. Quality Control: - Quality control measures are implemented to ensure that the final products meet the required specifications and standards. This may involve regular testing and analysis of the materials. 8. Environmental Considerations: - Sustainable practices and environmental considerations are crucial in the operation of a production plant. Measures such as dust control, water recycling, and rehabilitation of mined areas are often implemented to minimize the environmental impact. 9. Maintenance and Safety: - Regular maintenance of equipment is essential for the smooth operation of the plant. Safety measures are also critical to protect workers and ensure compliance with regulations. 10. Final Product: - The final products from a sand aggregate or gravel production plant may include various grades of sand, gravel, crushed stone, or other types of aggregates used in construction, concrete production, asphalt production, and other applications. It's important to note that the specific processes and equipment used in a production plant may vary based on the type of raw materials, the intended final products, and local regulations. Additionally, advancements in technology and sustainability practices may influence the design and operation of such facilities.

Condition: new, Year of construction: 2025, A sand aggregate production plant is a facility where various types of aggregates (such as sand, gravel, crushed stone, or recycled concrete) are produced for use in construction and other applications. These plants typically include various stages of processing, from raw material extraction to the final product. Here are the key components and processes typically involved in a sand aggregate production plant: 1. Raw Material Extraction: - Quarrying or Mining: Aggregates are often extracted from quarries, mines, or riverbeds. Depending on the type of aggregate, the extraction process may involve drilling, blasting, or dredging. 2. Primary Crushing: - Jaw Crusher or Gyratory Crusher: The extracted raw material is usually transported to the plant and fed into a primary crusher, where large rocks are broken down into smaller pieces. 3. Secondary Crushing: - Cone Crusher or Impact Crusher: The crushed material from the primary crusher may undergo further reduction in size through secondary crushing. 4. Screening: - Vibrating Screens: After crushing, the material is often screened to separate different sizes of aggregates. This process ensures that the final product meets the required specifications. 5. Washing: - Sand Washers: In some cases, especially for sand production, washing is done to remove impurities, clay, and fines from the aggregates, ensuring a cleaner and higher-quality product. 6. Grading and Sorting: - Classifiers or Graders: After washing and screening, the aggregates may go through additional processes to separate them based on size or quality. 7. Stockpiling: - Stockpiles: The final aggregates are usually stockpiled for storage before being transported to construction sites or other end-users. 8. Aggregate Storage and Handling: - Storage Bins or Silos: Larger production plants may have storage facilities, such as bins or silos, to store different types and sizes of aggregates before distribution. 9. Quality Control: - Laboratory Testing: Regular quality control testing is performed on aggregates to ensure they meet specifications for strength, size, gradation, and other properties. Nedpfx Ajq Ngb Dsdwjkt 10. Environmental Considerations: - Water Management: Some plants incorporate water management systems to recycle and reuse water used in the washing process, minimizing environmental impact. 11. Transportation: - Conveyors or Trucks: Aggregates are typically transported from the production plant to construction sites by conveyors, trucks, or other means.

Condition: new, Year of construction: 2025, Gravel and aggregate production equipment is used to crush, screen, and process stones, rocks, and other materials for the construction industry. This equipment is essential in producing various types of aggregates, including crushed stone, gravel, sand, and recycled concrete, which are used in the construction of roads, buildings, bridges, and other infrastructure projects. Here are some common types of equipment used in gravel and aggregate production: 1. Jaw Crusher: - Jaw crushers are primary crushers used to break down large rocks into smaller, more manageable pieces. They are essential for the initial stage of aggregate production. Nkodpfx Adeq Nxz Dswst 2. Impact Crusher: - Impact crushers are used to crush rocks and stones with the help of impact force. They are suitable for shaping and producing fine aggregates. 3. Cone Crusher: - Cone crushers are often used for secondary and tertiary crushing in aggregate production. They produce well-shaped and finely graded aggregates. 4. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are designed for shaping and producing high-quality artificial sand. They are suitable for processing materials with high abrasiveness. 5. Screens: - Vibrating screens are used to separate different sizes of aggregates. They classify the material based on particle size and ensure that the final products meet specified gradation requirements. 6. Scalping Screens: - Scalping screens are used to remove oversized materials before they reach the primary crusher. This helps to optimize the crushing process and prevent damage to the equipment. 7. Washing Equipment: - Washing equipment, such as sand screws or log washers, is used to remove impurities and fine particles from aggregates. This is particularly important for producing high-quality concrete sand. 8. Conveyors: - Conveyors are used to transport materials between different stages of the crushing and screening process. They play a crucial role in enhancing efficiency in material handling. 9. Stackers and Reclaimers: - Stackers are used to create stockpiles of processed aggregates, while reclaimers are used to retrieve the material from the stockpile. Both are essential for efficient material storage and handling. 10. Crushing Plants: - Complete crushing plants include various types of crushers, screens, and conveyors integrated into a single system. These plants are designed to handle large volumes of material efficiently.

Condition: new, Year of construction: 2025, An active lime production line is a set of equipment designed to produce high-quality lime from limestone, with the aim of meeting various industrial applications, such as in the production of steel, environmental desulfurization, and other processes. The process typically involves several stages, including limestone crushing, calcination, hydration, and finally, the production of active lime. Here is a general overview of the main steps involved in an active lime production line: 1. Limestone Quarrying: - Raw limestone is extracted from quarries and transported to the lime plant. The limestone may undergo crushing and sizing processes to achieve the desired particle size. 2. Limestone Preheating: - The raw limestone is typically preheated in a preheater or precalciner before entering the rotary kiln. This preheating step helps to reduce the energy consumption in the kiln by partially decarbonizing the limestone. 3. Loading into the Rotary Kiln: - The preheated limestone is loaded into the rotary kiln, a large, rotating cylindrical furnace. The kiln is inclined at a slight angle to facilitate the movement of materials through the kiln. 4. Calcination: - In the rotary kiln, the limestone undergoes high-temperature calcination (typically in the range of 900 to 1,450 degrees Celsius). This process causes the limestone to undergo chemical and physical changes, converting it into lime (calcium oxide). 5. Cooling: - After calcination, the lime moves through the cooling zone of the kiln, where it is cooled down. This cooling step is essential to stabilize the lime and prepare it for further processing. Nodpfeq Nyzbjx Adwekt 6. Hydration: - The quicklime produced in the kiln is then slaked with water in a hydration process to produce slaked lime (calcium hydroxide). This is typically done in a separate hydrator. 7. Separation of Unreacted Lime: - The slaked lime is separated from any unreacted quicklime or impurities. This step ensures that the final product is of high quality. 8. Filtering and Drying: - The separated slaked lime is filtered to remove excess water, and the resulting product is dried to achieve the desired moisture content. 9. Storage and Packaging: - The final product, active lime (calcium oxide), is stored in silos or other storage facilities. It can then be packaged for sale or transported to end-users. 10. Environmental Considerations: - Dust collection systems and other environmental control measures are often implemented to minimize emissions and ensure compliance with environmental regulations. The design and configuration of an active lime production line can vary based on factors such as the type of limestone used, production capacity requirements, and specific industrial applications. Modern production lines often incorporate advanced technologies to optimize energy efficiency, minimize environmental impact, and ensure high-quality active lime production.

Condition: used, Eccentric punch press HAULICK + ROOS type RVD 125 double column - eccentric press Machine No. 212560 Year of construction 1981 pressure force 125 ton. table size 880 x 800 mm table opening 470 x 140 mm Nkjdpfx Aohlnzkjdwot column width 900 mm column width lateral 415 mm ram stroke 45 mm slide adjustment travel 0-80 mm Installation height on the picture 340 mm Stroke rate 50 to 300 strokes/min. Motor power main drive 22 kW Mains connection 380 volt, 50 Hz - Double connecting rod drive with 4-fold eccentric shaft for off-center ram pressure load - adjacent electrical cabinet - NC roll feed EBU, width 250 mm, year 2003 - adjacent control panel for roll feed - strip running direction from left to right space requirement (press) L x W x H 3000 x 2000 x 3020 mm transport height 2950 mm weight of the press approx. 11 ton.

Condition: used, Miter cold circular saw KALTENBACH type KKS 400 NA Machine. No. 101701 Year of construction 1983 saw blade diameter 400 mm cutting range at 90° round Ø 130 mm sawing range at 90° square 120 x 120 mm sawing range at 90° rectangle 305 x 20 mm Cutting range at 45° round Ø 130 mm Sawing area at 45° square 110 x 110 mm Cutting range at 45° rectangle 245 x 30 mm Clamping range of collet feed 30 to 140 mm Nsdpjd N H A Njfx Adwekt Working height 1000 mm miter cut 0 - 180 feed path 600 mm Saw blade speed 10 + 20 m/min. 2 steps motor power 1,7 and 2,6 kW hydraulic motor 1,5 kW Mains connection 380 Volt, 50 Hz - Hydraulic material clamp feed with infeed roller conveyor left 1500 mm - Feed path via double feed up to 1200 mm (2x feed, then sawing) - Hydraulic material clamping with vertical clamping cylinder - miter cut - saw angle with manual adjustment - hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for the saw blade speed - saw blade stroke steplessly adjustable - coolant unit with electric pump in the machine base - Hydraulic unit fixed to the basic machine - Parts counter with zero cut-off space requirement of the saw 2600 x 1200 x 1900 mm weight of the saw approx. 1400 kg good condition

Condition: used, functionality: fully functional, With this offer, you are purchasing a used brochure production system, the ‘C.P. Bourg BBF2005 Perfect Binder’. Nkjdpfx Ajxzqa Usdwjt Item for sale: 1 x Bourg BBF2005 suitable for various Xerox model families: iGen ColorPress Nuvera DocuTech Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally.

Condition: used, functionality: unexamined, Bottled water production line for PET bottles in the following formats: 0.5 L, 1.5 L, and 2.0 L. Line output: approx. 16,000 bph Nedpfewv Trlsx Adwokt The line includes the following machines: 1) KHS triblock bottling machine, filler type 45-80-10, year 1998 (approx. 20,000 bph), control: S7-200 - KHS bottle washer, Innoclean FR-EM 45 - KHS filler, Innofill EV 80 - ALCOA KUPI 10/540 capper (max. 25,000 bph) 2) KRONES Contiroll 745 labeller, year 2000 (16,000 bph), control: S7-300 3) Shrink packer with tunnel – ZVT PSP 032 S, year 1998 4) Bottle liquid level inspection device – METEC Promecon 2000 5) Set of KHS Innoline slat conveyors – several dozen linear metres, including curves and dividers The machines are used, regularly serviced, and require a technical inspection before recommissioning. Currently dismantled and stored in containers, ready for transport. The line is prepared for reassembly – each element is marked with a unique identification number.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, overall weight: 4,000 kg, power: 17 kW (23.11 HP), total width: 1,510 mm, total length: 6,500 mm, total height: 1,820 mm, Automatic paper roll paper lid machine with inline packing machine for 8oz and 12oz cups Speed - 70~100 pc/minute Raw material - One-side or two side (polyethylene)film coated/laminated paper (Like the PE coated paper; PLA paper; card boad paper with film) Nkjdpsxur Hijfx Adwst Paper Lid Size - for 8oz and 12oz Working Power - 12kw Total Power - 17KW, Power Source - 3-phase, 380V, 50/60Hz, User Need To Buy Air Compressor

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 01/2027, electrical fuse: 16 A, opening width: 30 mm, working width: 475 mm, space requirement height: 580 mm, space requirement length: 940 mm, space requirement width: 2,055 mm, type of input current: three-phase, NEW Rondo STM 5304 Sheeter NEW Easy manual operation Suitable for rolling and laminating all types of dough Tables fold upwards Rolling thickness adjustable from 0.3 to 30 mm Dough sheeter with linen conveyor belts Belt width up to 475 mm Roller width 500 mm Njdpfxjyalbfj Adwskt Tabletop sheeter with 2055 mm table length Electrical system according to VDE standards Exclusively DGUV V3 tested by us Dimensions: 2055/850 x 940 x 580 mm (LxWxH, operating / rest position) Connection: 400V, 0.5 kW, 16A CEE plug Weight: 95 kg NEW machine & SAB inspected With warranty & spare parts service Options: Maintenance contract Service package Spare part box Delivery service Instruction & commissioning We offer a TOP selection of dough sheeters!

Condition: reconditioned (used), functionality: fully functional, Dough divider and rounder Nkedpfxoyala Ue Adwet Roll Press Fortuna Automat A 3 H + with rounding disengagement Cleaning access to the head from the rear Head completely overhauled with NEW stainless steel knife Dough portioning up to 2400g, depending on dough hydration 30-piece dough divider Connection: 400V, 16A-CEE plug Dimensions: 720 x 800 x 1510 mm Refurbished used machine Quality from a specialist workshop! Benefit from over 35 years of experience! Options: Stainless steel pedestal New rounding plate Service package Maintenance contract Training & commissioning Delivery service Visit our large exhibition of roll presses!

Condition: reconditioned (used), functionality: fully functional, total length: 730 mm, total width: 770 mm, total height: 1,500 mm, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 01/2027, type of input current: three-phase, Bun divider and rounder Fortuna Automat A 4 E Nedpfx Aeyak Uksdwjkt Dough dividing and rounding machine TOP model with rounding deactivation Head cleaning with electric motor Dividing head newly refurbished, 30-portion with NEW stainless steel knives robust engineering DGUV V3 tested with return button Connection: 400V, 16A CEE plug Dimensions approx.: 770 x 730 x 1500 mm (WxDxH) Refurbished used machine with warranty + spare parts service Option: Stainless steel platform Rounding plate Service package Maintenance contract Spare parts box Delivery service Instruction & commissioning Visit our extensive selection of bun dividers and rounders!

Condition: good (used), functionality: fully functional, conveyor belt width: 615 mm, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 01/2027, electrical fuse: 16 A, opening width: 30 mm, working width: 615 mm, space requirement length: 1,205 mm, space requirement width: 2,800 mm, type of input current: three-phase, Fritsch Rollfix 3W 630 Dough Sheeter Nodpfx Adeyak S Aewokt For all dough types – sheeting and laminating With pressure board for long rolling Manual control Dough sheeting machine With hand and foot control Mobile design Connection: 400V 16A CEE plug Dimensions approx. 2800 x 1205 mm (W x D) Used machine Options: Maintenance contract Service package Spare parts box Delivery service Commissioning & training Visit our wide range of dough sheeters!

Condition: good (used), functionality: fully functional, conveyor belt width: 600 mm, input voltage: 400 V, input frequency: 50 Hz, empty load weight: 195 kg, DGUV certified until: 01/2027, electrical fuse: 16 A, opening width: 30 mm, working width: 600 mm, type of input current: three-phase, Dough Sheeter Fritsch Rollfix Model: 3W 600 Suitable for all types of dough for sheeting and laminating Featuring pressing board for long rolling Manual control Dough sheeting machine With hand and foot control Mobile machine Connection: 400V, 16A-CEE plug Dimensions approx. 2800 x 1205 mm (W x D) Used machine Options: Maintenance contract Service package Spare parts box Njdpfx Adoyaklpswokt Delivery service Training & commissioning Visit our large selection!

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 01/2027, electrical fuse: 16 A, opening width: 30 mm, working width: 475 mm, space requirement height: 580 mm, space requirement length: 940 mm, space requirement width: 1,560 mm, type of input current: three-phase, NEW Rondo ECONOM 4000 STM 5303 Dough Sheeter NEW Nkedpoyakk Eofx Adwst Simple manual operation For rolling and laminating all types of dough Fold-up tables Rolling thickness adjustable from 0.3 to 30 mm Dough sheeter with linen conveyor belts Belt width up to 475 mm Roller width 500 mm Table-top sheeter with 1560 mm table length DGUV V3 safety-tested exclusively by us Dimensions: 1560/670 x 940 x 580 mm (LxWxH, operating/parked position) Power supply: 400V, 0.5 kW, 16A CEE plug Weight: 85 kg NEW machine, safety-checked (SAB) With warranty and spare parts service Options: Maintenance contract Service package Spare parts box Delivery service Commissioning & training

Condition: good (used), functionality: fully functional, conveyor belt width: 635 mm, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 01/2027, electrical fuse: 16 A, opening width: 45 mm, working width: 635 mm, space requirement height: 1,380 mm, space requirement length: 1,175 mm, space requirement width: 2,210 mm, type of input current: three-phase, Seewer Rondo SKO 611 Dough Sheeter Suitable for all types of dough for sheeting and lamination with programmable control Extension table on the left Pressure plate with handwheel adjustment Long roller / moulder below Mobile dough sheeter with locking casters Connection: 400V, 16A CEE plug Dimensions: 2210 x 1175 x 1383 mm (W x D x H) Used machine Options: Maintenance contract Service package Delivery service Instruction & commissioning Nksdpfoyakkxex Adwot We have many more dough sheeters in stock!

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, conveyor belt width: 520 mm, total width: 1,200 mm, total length: 1,030 mm, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 01/2027, electrical fuse: 16 A, opening width: 30 mm, working width: 520 mm, type of input current: three-phase, Dough Sheeter Sinmag SM 520 F Njdpfx Adeyakkrewskt Proven, advanced technology – tested and reliable in numerous applications! Easy manual operation Suitable for all dough types for sheeting and laminating Tables can be folded up Adjustable sheeting thickness: 1 to 30 mm Sheeting width up to 520 mm Conveyor belt length: 2x 980 mm Standing machine, mobile, with dough roller DGUV V3 safety tested exclusively by us Connection: 400V, 16A-CEE plug Dimensions: 1030 mm D x 1200 mm W Used machine, cleaned & SAB-inspected Warranty and spare parts service included Options: Trailing conveyor Felt belt Maintenance contract Service package Spare parts box Delivery service Commissioning and operator instruction

Year of construction: 2009, condition: reconditioned (used), Complete plant for the production of wood wool/wood shavings out of logs with a lngth up to 3,0 m. Total capacity about 4 to/h. Complete control system including knife grinding machine, several planer heads, conveyor system for wool transport. Exhausting system. very good condition. Nksdpoiiia Rofx Adwst

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: ALÜMİNYUM TEK KAFALI PENCERE ÜRETİM SETİ, • Enables production of 46 - 60 windows in an 8-hour shift • Our set offers the most competitive price to customers with various machine options • Available in 380 Volt or 220 Volt configurations • Complies with CE (European) standards • Door-to-door delivery prices worldwide • References from previous clients in your country available upon request MACHINE CONTENT • SC 402 Aluminum & PVC Up-cut Saw (Ø550 mm) & SC 403 Aluminum & PVC Up-cut Saw (Ø600 & Ø650 mm miter saw) • SC 542 Aluminum Copy Router • SC 211 Aluminum & PVC Mullion Processing Machine & SC 211 S Series mullion processing machine with quick-change blades Nkodpfx Adjrfy Dwewst • SC 901 S Pneumatic Aluminum Corner Crimper & SC 902 S Hydraulic Aluminum Corner Crimper You can increase your production capacity with different machine options. Please contact us for a catalogue.

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: PVC TEK KAFALI ÜRETİM GRUBU, • Enables production of 40 - 60 windows in an 8-hour work environment • Our set, which offers the most competitive price for the customer through various machine options • Available in 380 Volt or 220 Volt versions Njdpfjrc H Hfjx Adwjkt • Compliant with CE (European) standards • Door-to-door pricing for worldwide delivery • References from existing customers in your country MACHINE CONTENTS • SC101 S Single Corner Welding Machine • SC 211 Aluminum & PVC Mullion Processing Machine (2 blades) • SC 301 PVC Bead Cutting Machine or SC 301 S Aluminum & PVC Bead Cutting Machine without mold (applicable to 12 different beads) • SC 401 Aluminum & PVC Under-Cutting Saw (includes Ø450 mm saw blade) • SC 501 PVC Handle Drilling, Grooving, and Water Drainage Machine or SC 502 S Aluminum & PVC Handle Drilling, Grooving, and Water Drainage Machine (High-Frequency Motor) • SC 601 PVC Corner Cleaning Machine (3 blades)

Condition: excellent (used), functionality: fully functional, Dies for rain gutter and accessory production lines We offer PVC extrusion dies for: -production of rain gutter systems, including the Royal Dual Wall Gutter and Gutter 125, -corners, elbows, and other PVC accessories, -other structural and construction elements made of PVC. Available die types: -Royal Dual Wall Gutter die -Gutter 125 die -Other dies for accessories and gutter systems -Royal Dual Wall Gutter system Features: -Made of high-grade, wear-resistant tool steel -Precise shape forming -Adjustable die parameters to meet production requirements -Compatible with PVC granulation and extrusion lines Njdpfjydbl Ujx Adwekt NOTE: For detailed information about the dies and products, please contact us.

Condition: ready for operation (used), functionality: fully functional, Fully equipped plastic processing extrusion line, comprising: - Main extruder: BA92 NOVEL - Co-extruder: ROYAL MACHINE, model 253-070-000, mounted on column. Line sold in parts. - Suitable for co-extrusion applications – e.g. multilayer profiles, strips, technical components TECHNICAL DATA – BA92 (NOVEL) Extruder - Screw: Ø92 mm, length 24 L/D - Type: B60S4; VB92-24-005 - Speed range: 3.3 ÷ 33 rpm Nsdpfxsyc R U As Adwekt - Barrel: 34CrAlNi7 steel, hardness 1000 HV - Gearbox: ratio 1:63.4 R - Thrust bearing: 1,170,000 N - Heating zones: 6 - Cooling zones: 4 - Motor: 63.8 kW, DC, 210–2100 rpm - Degassing: 2.2 kW pump, 36 m³/h, vacuum 700 Hg - Feeder: 1.2 kW DC motor TECHNICAL DATA – ROYAL MACHINE Co-extruder - Screw: Ø1¾", length 21D, compression ratio 2:1, double-flight - Material: AISI 4140 steel (bimetallic barrel 2” O.D. x 1¼” I.D.) - Gearbox: ROSSI RCI 80 U03A, ratio 1:16.4 + belt 1:1.65 (total ratio 1:27) - Drive belt: type 3VX560, 3 pcs. - Thrust bearing: load capacity 20,000 kg - Heating: 6.9 kW, 3+1 heaters - Cooling: 1/16 HP, 3 fans - Motor: POWERTEC Frame 184 TC, 5 HP, 0–1750 rpm Condition: complete line, operational, ready for use Application: plastic processing in co-extrusion processes Technical documentation and photos available upon request.