Used Dovetailer for sale (177)

Condition: good (used), Upper support, upper slide, dovetail guide, cross table -Tool slide: from automatic lathe SUGA type STS-2 -Measurements: see photos -Dimensions: 830/610/H300 mm Pgsdpfx Abjfnxw Tjpsr -Weight: 119 kg

Condition: good (used), Counterholder, counter bearing, bearing block, pillow block, bearing for milling machine -Counter bearing: for milling machine -Dovetail: 190 to 165 mm Podoxfhv Uepfx Abpjgr -Bore: Ø 56 mm -Number: 2x counter bearings available -Price: per piece -Dimensions: 265/77/H122 mm -Weight: 6.1 kg/piece

Condition: good (used), Upper support, upper slide, dovetail guide, tool slide, cross table, spindle drive for upper support -Spindle drive: for upper support -Trapezoidal spindle: Ø 20 mm -Dimensions: see photos Pedpfsxfzuwjx Abpsgr -Dimensions total: 450/155/H110 mm -Weight: 5.4 kg

Condition: good (used), Counterholder, counter bearing, bearing block, pillow block, bearing for milling machine -Counter bearing: for milling machine -Bore: Ø 48 mm / Height 70 mm -Dovetail: 90 to 74 mm 15 mm high -Dimensions: see technical drawing in the photos Psdpfxjwa Rv Nj Abpsgr -Dimensions: 133/60/H135 mm -Weight: 4.2 kg

Condition: good (used), T-slot plate, clamping plate with dovetail slots, plate field, welding table, welding table -Intermediate plate: for hydraulic press eccentric press -Opening: 150 x 100 mm -Groove width: 18 mm -Hole spacing: 200 x 250 mm, Ø 14 mm -Dimensions: 480/350/H60 mm Podpfomydncex Abpogr -Weight: 66 kg

Condition: good (used), Counter support, counter bearing, bearing block, pillow block, bearing for milling machine Pgsdpfxsb Nblzj Abper -Dovetail: 75 to 90 mm, 15 mm high -Bore: Ø 55 mm -Drawing with the photos -Dimensions: 130/70/H150 mm -Weight: 10 kg

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 20518, We are offering this used Schmidler S4 woodworking machine, manufactured in 2000. Manufacturer: Schmidler Model: S4 Year of manufacture: 2000 Type of machine: abbundanlage (cross-cutting machine) - 4-strand cross-feed conveyor (inclined) - Infeed roller conveyor - Zero-point detection - Electronically controlled under-table swivel miter saw - Saw blade diameter 710mm Pgodpsy Ewxzjfx Abpsr - Rotation angle 360 degrees - Tilt 0-65 degrees - Waste wood discharge - Marking pen, horizontal (from below) and vertical (from behind) - Universal milling cutter including finger cutter and dovetail milling cutter - Horizontal drilling unit – rafter nail drilling unit - Vertical drilling unit - Powered outfeed roller conveyor - Pusher – pneumatic - Transport and measuring system - Conveyor belts to be replaced - Control system: sema btl Maximum component dimensions: Height 300mm Width 400mm Overall length approx. 21m Infeed roller conveyor Outfeed roller conveyor with pusher and stacking bars Machine used, fully functional, Conveyor belts to be replaced Machine can be inspected by arrangement. Available for sale immediately. If you have any questions or would like more information, please send us a message or call us.

Condition: new, Centauro ALFA NC Machining Centre For Joinery Components & Doors A versatile and flexible NC controlled machining centre suitable for a variety of machining operations including hinge recessing, lock slots, handle holes, key slots and euro grooves etc. Programming is extremely simple thanks to the colour graphic touch screen controller using pre-installed electronic macros. As standard the machine can be equipped with one milling head that automatically moves for either vertical or horizontal machining. It also has interpolation of the axis. Optional additional machining operations include producing a square corner hinge plate recess or lock face recess by means of the additional milling unit. The operator simply selects in the program if they want a radius or square corner and the machine does the rest. In addition the same milling head can be used to make the small pilot hole for hinge screws etc. There is also the possibility to produce a square end tenon, round end tenon or dovetail / dovetail slot when the special front table is fitted. Lastly on request the machine can be configured to import ISO files from external design software (e.g ARTCAM Express) to enable detailed engraving of items such as name plates etc. Axis capacity - X 2800mm, Y 180mm, Z 150mm. (2400mm X capacity when optional drilling head fitted). 1 x ER32 collet for milling cutter 16mm max. dia. Max working table dimensions - 3000x618mm X axis positioning speed 35m/min. Y axis / Z axis positioning speed 6m/min. Retractable pneumatic positioning stops 2 off - on front of table Podpfx Absb Tmngopsgr Adjustable pneumatic workpiece clamps x 3 - mounted on rear of table. Left hand side ref. stop. Front table extension supports x 2 Router motor power 3.3kw. Router motor RPM 0-18,000 rpm. Touch screen controller - Elco Power 1000. Dust extraction outlet x 1 80mm dia, 2 x 100mm dia CE side and rear safety guards with front light curtain.

Condition: excellent (used), Here we offer you an FRT MicroSpy Mobile. Device designation: FRT MicroSpy Mobile, Art. No. MSP 105 00 Device number: MSP1033 FRT MicroSpy Mobile Portable optical profilometer for non-destructive 3D surface measurements directly on the component. Due to its portability, the MicroSpy Mobile is ideally suited for mobile use on large machines, vehicles, rollers, glass panes, or other large components. This enables high-resolution and non-destructive measurements to be performed "on-site" to determine important characteristics of surfaces, such as roughness, contour, topography, layer thickness, wear, load-bearing capacity, or volume. Smaller samples can be measured directly on the measuring table. Usable on large construction and machine parts. Excellent resolution values. Excellent reproducibility. Non-destructive measurement. Handles and adjustable support feet. Low weight (approx. 5 kg). FRT Technical Specifications: Device: MicroSpy Mobile xy-travel 50 x 50 mm² xy-table Type: compact XY cross table with open frame Bearing: mechanical cross-roller guide Drive: DC motor with ball screw Travel (XY measuring range): 50 x 50 mm² (or 20 x 20 mm² with CWL 3 mm) Position measuring system: rotary encoder Measuring system resolution: 0.25 µm XY repeatability: < ± 1 µm Table height variation (per axis): < 2 µm / 50 mm (of which not reproducible): < 0.5 µm Right angle XY: < 4 µm / 50 mm z-axis, motorized: Type Position Drive Travel Position measuring system Measuring system resolution Axis wobble Coarse adjustment, manual: Type: dovetail guide with fine drive Adjustment range: 25 mm Measurement: Minimum point distance xy: 1 µm Sample size: - Sample weight: - Min. measurement speed: 1 µm / sec Max. measurement speed: 50 mm / sec Overall system: Total weight: approx. 150 kg of which measuring system: approx. 5 kg Footprint measuring system: approx. 0.3 x 0.3 m² Dimensions control unit (W x D x H): approx. 0.65 x 0.65 x 1.0 (1.6) m³ Power supply EU version: 110 - 240V, 50 - 60Hz, 16A Power supply US version: 110 - 240V, 50 - 60Hz, 16A Power consumption: typically 300-400 W Compressed air supply: - Ambient temperature: 22°C ± 5°C Temperature stability: < 0.5°C/h Environmental conditions: measuring room Scope of delivery: 1 x XY table with 50 x 50 mm² travel 1 x Mobile base with electronics Podpfxjzdnqcj Abpogr 1 x Chromatic sensor FRT CWL 600 µm 1 x Electronics for chromatic sensor 2 x Keys for computer 2 x Keys for rear door 1 x Power cable for cold devices 1 x Mouse (PS/2) 1 x Keyboard 1 x Monitor 19'' TFT Type: FRT MicroSpy Mobile Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Year of construction: 2001, condition: used, Fully automatic infeed system for dovetail cutter Table width max. 620 mm Spindle feeder Automatic length sorting, 3 lengths Package forming, 3 x Buffer Package turner Package destacking Manual infeed Buffer before the zinc coating system with 6 compartments Specification: Wood input length: min. 150 mm max. 600 mm Wood cross-section: min. 20 x 40 mm max. 80 x 180 mm Performance: 6 milling tables/min Working height: 960 mm Table width: 620 mm System width: System length: See pictures System is immediately available, already dismantled. Pgedpfoh Icimox Abpor

Year of construction: 2007, condition: reconditioned (used), Fully automatic dovetail cutting system: Double-pack type Machine has been disassembled Machine is being overhauled Specifications: Wood input length: min. 150 mm max. 1000 mm average 400 mm Wood cross-section: min. 20 x 40 mm max. 80 x 180 mm Wood output length: 6030 mm Max. wood cross-section with a 10 mm dovetail size: Hardwood 120 cm² Softwood 150 cm² Dovetail design: vertical and horizontal Adhesive type: PVAC white glue, two-sided glue application Electrical power: Connection voltage: 400 V Control voltage: 24 V 50 Hz System is completely wired up to the control cabinet. Dovetail length / possible wood cross-section and adhesive type can still be adjusted. Pgedod Tipaspfx Abper Performance: 6 milling stations/min Working height: 960 mm Table width: 600 mm Glue application: double-sided Technical parameters: Input material: Input length of parts (min. - max.): 150-1000 mm Part width (min. - max.): 40-155 mm Part thickness (min. - max.): 20-80 mm Working height: 960 mm Bundle width: 600 mm Glue application: double-sided application (on both sides of the

Year of construction: 2020, condition: new, Dovetail cutter system, Huckle. Pgjdpfx Abjfhkvleper

Condition: excellent (used), Counter bearing (28437) Pgsdpfx Aed Scciobpjr Manufacturer: Klopp Center-to-mounting surface distance: 100 mm Dovetail width: 260 mm Total weight: 28.5 kg

Condition: used, Technical details: Podpfsu Iccpox Abpegr pressure: 315 t chamfer lenght: 5050 mm distance between columns: 4100 mm throat: 500 mm stroke: 250 (Wange) mm control: DNC 884s weight of the machine ca.: 27,0 t machine dimensions LxWxH: 5,7 x 2,2 x 4,0 m Machine stands approx. 0.95 m inside foundation in the floor. Application for: Embossing and free bending via the DNC control, manual, semi-automatic and automatic operation is possible. distance between table and upper beam max. 490 Table: with extension about 800mm, tool holder on the table = dovetail 30mm. accessories: many dies and punches *

Condition: good (used), Year of construction: 2001, functionality: fully functional, FMB MBZ 75 - 80, 5-axis FMB multi-machining center, Type MBZ - 2 / 72-80 / 5, Year of manufacture 2001, PC control with TFT color display, Travel range X/Y/Z 7000/1000/370 mm, Milling head with high-frequency spindle for aluminum, Spindle speed up to 18,000 rpm - 7.5 KW, Tool changer, 12-position, Tool holder HSK 40, 2-axis NC dovetail milling head, 8 pneumatic clamping elements, Swivel machining possible, Program generator, FMB programming software, Pgedszhuitepfx Abpjr Pneumatic material stop, Measuring / probing device.

Condition: used, Year of construction: 2004, functionality: fully functional, General Control system: SIEMENS 840 D Main spindle Bar capacity: 60 mm Speed: 6000 rpm Power: 29 kW Torque: 140 Nm Synchronous spindle Technology: Mounted on the turret Mount: Collet chuck, D = 42 mm Maximum speed: 4,500 rpm Turret 1 (X/Z) Technology: Tool turret with 8 stations Pgodpfx Aezgcp Sobper Tool holder: For DIN 69880 - 25x48 mm Maximum speed: 6000 rpm Power: 3.3 kW Maximum torque: 7.5 Nm X-axis: 90 mm Z-axis: 280 mm Turret 2 (X/Z) Technology: Tool turret with 6 stations Tool holder: Symmetrical dovetail mount Speed: 4,500 rpm Power: 4.2 kW Torque: 7.5 Nm X-axis: 81 mm Z-axis: 80 mm Equipment Chip management: Hinged belt chip conveyor Coolant management: Coolant pump, 8 bar Part removal: Workpiece removal device Bar loader: Bar loader magazine LM 3200 Ejector: On the synchronous spindle

Condition: used, Universal milling machine, console milling machine SIMPLON Type UN-S / Universa-Super Machine No.: 17220 Year of manufacture: 1979 Travel X: 900 mm, Y: 240 mm, Z: 400 mm Table size 1300 x 300 mm Tool holder SK 40 - M16 Spindle speed 50 - 1750 rpm, 16 steps Feed rate X, Y, Z axis 11 - 500 mm/min Rapid traverse 2400 mm/min Main spindle motor power 4 kW Connection voltage 380 Volt, 50 Hz - 3-axis digital display HEIDENHAIN, Type VRZ 750 (X-scale missing) - Main spindle drive via 16 gear stages - Clockwise and counterclockwise rotation of the milling spindle - Vertical milling head, swiveling +/- 90° - Overarm from the milling head, manually adjustable 700 mm - Side, manually extendable counter bearing mount with dovetail guide 450 mm - Mechanical tool clamping with tightening screw M16 - Coolant system in the machine base - Electrical control cabinet on the machine Pgedpjifu Arjfx Abpsr Space required L x W x H 1600 x 1850 x 1850 mm Weight 2400 kg Good condition

Condition: new, functionality: fully functional, Year of construction: 2025, BODOR Laser Cutting Machine Model: P3015-12000W with 12 kW BODOR Laser Source Equipped with a shuttle table, programmable via CNC control system Configuration: - 12 kW BODOR Laser Source - Bodor Genius Laser Cutting Head - Bodor Thinker Control System - 21.5-inch monitor with touch function - Insert and dovetail plate welded segment bed - Bodor servo motor and driver - SMC oxygen regulating valve from Japan - Parker nitrogen regulating valve from America - Automatic nozzle changer (8 stations), nozzle cleaning, and calibration automatic - One-click processing - Bodor Lightning Perforation Technology - Automatic adjustment of cutting gas pressure (O2) - Protection when the door is open - Alarm function for cutting errors - Autofocus of the laser head - Expert database for laser cutting technology - Ergonomic remote control (Bodor Mango®) - Active anti-collision function - Intelligent maintenance reminder - WIFI internet connection - Bodor Cloud service - Water chiller - Stabilizing transformer - CE conformity Technical Data: Length with panel: 9,950 mm Width: 3,050 mm Height: 2,300 mm Weight: 8,300 kg Working area: 3,048 x 1,524 mm Max. workpiece weight: 1,450 kg Shortest pallet change time: 10 sec. Max. simultaneous speed: 200 m/min. Positioning accuracy: 0.03 mm Repositioning accuracy: 0.02 mm Screen size: 21.5 inches Number of shuttle tables: 2 Max. sheet thickness carbon steel: 35 mm Max. sheet thickness stainless steel: 30 mm Max. sheet thickness aluminum: 25 mm Max. sheet thickness brass: 16 mm Max. laser power: 12 kW Laser source type: Bodor Pgjdpfozd Eqgex Abper Laser head: Bodor Genius Software: Bodor Thinker Including the following special accessories: - Extraction system (The connection/piping of the extraction system to the machine must be carried out by the customer) - Wear part set - Installation package - Including fully automatic loading and unloading module, Model: iTrans 3 Technical Data: Max. material size: 3,000 x 1,500 mm Min. material size: 1,000 x 1,000 mm Max. material thickness: 25 mm Min. material thickness: 1 mm Max. loading weight: 900 kg Max. loading weight for finished products in the trolley: 3,000 kg Dimensions loading module (L x W x H): 10,000 x 8,500 x 2,600 mm Weight loading module: 4,800 kg Errors and prior sale are reserved!

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, cutting width (max.): 450 mm, working length: 16,000 mm, working width: 450 mm, Equipment: safety light barrier, A well-maintained Hundegger K2 cutting machine with a planer is offered for sale. The machine is fully functional and has been serviced several times a year by Hundegger. The machine is still in operation until the beginning of November and can then be dismantled by the buyer. =Equipment: = Machine type K2-5-450 - Wood length, feed and discharge max. 16m - Color RAL 5012 blue - Feed cross conveyor, 6 strands, horizontal, 2.2 m with flat belt chains - Extendable wood discharge - Undercarriage swivel miter saw - Universal milling cutter, 5-axis UFS (roller cutter, finger cutter, dovetail cutter) - Combination support for vertically operating tools (finger cutter, drilling unit 2.2kW) - Combination support for horizontally operating tools (drilling unit 2.2kW, drilling unit 2.2kW) - Marking device at the front - Discharge table, 6-arm - Beam turning station, hydraulic - Enhanced wood support surfaces (the vulnerable plastic coating has been replaced with maintenance-free stainless steel, chrome-plated tables, stainless steel rollers) - Extension roller conveyor, 10m with feed roller - Transfer cross conveyor, 7 strands, 3.5m with flat belt chain - Connection to planer HMD Pgodpfx Abjzb I Iwopor = Planer HMD - Fully automatic 4-sided planing and chamfering - Planer motors 7kW - Automatic thickness planer adjustment - Direct planer control - Planer machine directly integrated after the cutting machine = Other - Inspection possible by appointment. - If the machine is being dismantled, it can of course also be inspected in the operating environment. - A new K2 with a planer and comparable equipment costs approximately 800,000 euros. - New spare parts in stock can be included at a favorable price. - The machine runs perfectly, however, no guarantee or liability is assumed for future damages. - Ideal machine for medium to large carpentry or sawmill operations. = Contact - Friedrich Hirsch GmbH - Schwaig 2, 3351 Weistrach, Lower Austria - Managing Director and Owner: Friedrich Hirsch - If you have any questions, please call us from Monday to Friday from 7:00 a.m. to 12:00 p.m. and from 1:00 p.m. to 5:00 p.m. or send an email at any time. - Unfortunately, I cannot provide a mobile phone number, as the advertisement would otherwise be blocked.

Condition: used, functionality: fully functional, Metering and application system Hydrotop 1 E400R + Ecotac_C Psdjul Shnspfx Abpsgr for single-component (1K) PUR edge gluing for package dovetail joint systems Glue application – dovetail joint Adhesive application – dovetail joint in very good condition functionality tested

Condition: new, Year of construction: 2026, Invest in modernity and versatility with the ZX 7055 DRO milling and drilling machine, ideal for small to medium-sized repair and production departments. This medium-sized machine not only offers an auto-feed with vertical head, but also threading functions and digital readout as standard. Product characteristics standard readout. Discover its reliable features that make the ZX 7055 DRO an excellent choice for your workshop: Heavy Stable Cast Iron: The solid construction in heavy cast iron is the foundation for durability and precision. The ZX 7055 DRO milling/drilling machine maintains stability even during the most demanding tasks. Automatic feed: Save time and increase productivity with the automatic feed. The motorised vertical head allows efficient machining of materials without the need for constant supervision. Solid Cross Table with Precision Ground Surface: Attention to detail is a key element of the design. The solid cross table with a precision-ground surface ensures excellent flatness, which will translate into precise machining. Swallow Tail Slides: Innovative dovetail-shaped guides guarantee smooth and precise movement in three axes. Achieve perfect results without compromise. Quiet Operation Thanks to Ground Gear Wheels: Focus on the work, not the noise. The ground gears make the router-drill run quietly for a comfortable working environment. Left and Right Rotation: Adapt the machine to your needs. The ability to rotate both ways gives you extra flexibility in the machining process. Head Rotation +/- 90° and Adjustable Head Height: Adapt to different tasks with +/- 90° head rotation and adjustable head height. Achieve precise results in all conditions. The ZX 7055 DRO milling/drilling machine is a state-of-the-art tool that will redefine your material processing experience. Order today and experience exceptional performance in your workshop! MAXIMUM FACE MILLING CUTTER DIAMETER 80 mm MAXIMUM END MILL DIAMETER 32 mm HEAD ROTATION ANGLE +/- 90° SPINDLE ROTATION 75, 180, 280, 600, 1000, 1600 rpm SPINDLE FEED RATES 0,1; 0,18; 0,26 rpm MANDREL HANDLE MK4 SPINDLE PITCH 125 mm (automatic feed) WORKING TABLE DIMENSIONS 1000 x 240 mm TRAVERSE TABLE X/Y 670 x 185 mm WIDTH/SPACING/NUMBER OF T-SLOTS Pjdjud H Thspfx Abpsgr 18 mm/80 mm/3 DISTANCE FROM SPINDLE TO TABLE 90 - 460 mm DISTANCE FROM SPINDLE TO COLUMN 235 mm MOTOR POWER 1,5 kW / 2,1 hp POWER SUPPLY 400 V WEIGHT 425 kg PACKING DIMENSIONS 970 x 760 x 1160 mm Standard equipment spindle auto-feed digital readout longitudinal auto-feed of table with speed adjustment height adjustment of headstock with electric motor cooling system

Condition: new, functionality: fully functional, grinding length: 304 mm, grinding width: 152 mm, Surface Grinder MSG 1530 BERNARDO Compact surface grinder: longitudinal, cross, and vertical feeds are all completely manual. Low-vibration spindle operation thanks to the use of high-quality special bearings. Indispensable for machining smaller parts and in fast grinding processes. Longitudinal table movement via a combination of V-guide and flat guide; cross table travel and vertical wheel feed are handled by dovetail guides. Pedpfjyt Hycex Abpegr Central manual lubrication for all guides. All main components, such as the column, base, and slideways, are made from high-quality cast iron. Technical Specifications Table clamping surface width: 304 mm Table clamping surface depth: 152 mm Longitudinal travel (X): 340 mm Cross travel (Y): 170 mm Max. spindle axis to table distance: 210 mm Max. table load: 30 kg Grinding wheel size: 180 x 13 x 31.75 mm Grinding spindle speed: 2800 rpm Grinding spindle motor power: 0.55 kW Voltage: 230 V Dimensions (width): 1100 mm Dimensions (depth): 760 mm Dimensions (height): 880 mm Weight approx.: 210 kg Cross feed (Y) Manual cross feed: 2.54 mm/rev. Handwheel graduation (Y): 0.02 mm Vertical feed (Z) Manual vertical feed: 1.25 mm/rev. Handwheel graduation (Z): 0.025 mm Scope of delivery Basic tools Permanent magnetic chuck Grinding wheel flange Grinding wheel Legally required safety guards Complete DTR (technical documentation) in Polish CE certificate 24-month warranty for all, at no extra charge

Condition: new, functionality: fully functional, Drill-milling machine FM 55 HSV equipped with height adjustment of the milling head via an auxiliary motor and automatic quill feed. The basic configuration already includes all essential accessories (3-axis digital readout, power feed for the milling table, central lubrication, cooling device, LED work light, cast iron base with coolant channel, CE-compliant safety equipment), making this machine suitable for universal applications. Standard equipment includes automatic quill feed and threading mode Rapid X-axis table adjustment thanks to automatic feed with rapid traverse function Cast iron machine base ensures vibration-free operation Enhanced productivity thanks to the standard 3-axis positioning display Two-stage motor with 12 selectable speeds (75 – 3200 rpm) Versatile use – e.g. slot milling, surface milling, boring, etc. Milling head tilts both sides for angled drilling, edge milling, etc. Stability due to dovetail guideways for the gear head Dovetail guideways in the X, Y, and Z axes, adjustable via gib strips Convenient milling head height adjustment by motor Manual central lubrication for all guideways Technical specifications Max. drilling capacity: 32 mm Max. drilling capacity in castings: 40 mm Max. face mill diameter: 80 mm Spindle/column distance max.: 220 mm Spindle/table distance: 95 – 485 mm Quill stroke: 120 mm Automatic quill feed – range: (3) 0.10 / 0.18 / 0.26 mm/rev Min. spindle speed: 75 rpm Max. spindle speed: 3200 rpm Speed change – number of steps / stepless: 12 Spindle taper: MK 4 Pgedpjytdy Tsfx Abpjr Table size – width: 800 mm Table size – depth: 240 mm Travel in X-axis: 420 mm Travel in Y-axis: 200 mm Head vertical adjustment: 390 mm Head swivel: -60° to +60° T-slots (number, size, spacing): 14 mm Quill vertical lifting motor power: 90 W Motor power: 1.5 / 2.2 kW Motor power S1 100%: 1.1 / 1.5 kW Voltage: 400 V Dimensions – width: 1270 mm Dimensions – depth: 960 mm Dimensions – height: 2120 mm Weight approx.: 447 kg Scope of supply 3-axis digital readout ES-12V LCD 3–16 mm / B16 quick-action drill chuck Drill chuck arbor MK 4 / B16 Spindle M 16 Reducer sleeve MK 4/3 Combined milling arbor MK 4/27 mm Automatic quill feed Height-adjustable safety guard Milling head lifting motor Central lubrication X-axis table feed AL 450 D LED work lamp Electronic spindle speed indicator Electronic quill stroke indicator Thread-cutting mode Slat safety guard Cooling system Longitudinal scale Cast iron base with coolant system Operator tools

Condition: new, functionality: fully functional, feed length X-axis: 590 mm, feed length Y-axis: 180 mm, feed length Z-axis: 320 mm, Powerful universal milling machine UWF 80 E designed for professional craftsmen and specialists. Equipped with two spindles – horizontal and vertical. Large clamping table surface of 1000 x 240 mm, additionally tiltable within a range of +/-45°. Automatic feed for X and Y axes. Swiveling head +/-90°. 3-axis digital display. Schneider Electric electrical system. ISO 40 taper. Features: - Capability for both vertical and horizontal milling – extends the application range - Milling table tiltable by 45° to the right and left - Quiet operation with ball bearings ensures excellent concentricity - Easy spindle speed adjustment - Swiveling milling head from -90° to +90° - Large clamping table area: 1000 x 240 mm - Automatic feed for X and Y axes, including rapid traverse for X axis - Milling: spindle feed set via handwheel - Drilling: spindle feed set via feed lever - Quick-switching clutch between automatic and manual spindle feed - Right and left spindle rotation for thread cutting - Dovetail guides - Precision cross table with T-slots - 3-axis digital display included Technical specifications: - Table size (width): 1000 mm - Table size (depth): 240 mm - Spindle taper: ISO 40 - Spindle speed min: 115 rpm - Spindle speed max: 1750 rpm - Horizontal spindle speed min: 60 rpm - Horizontal spindle speed max: 1350 rpm - Speed change – number of steps/stepless: vertical – 8, horizontal – 9 - Quill stroke: 125 mm - Travel in X axis: 590 mm - Travel in Y axis: 180 mm - Travel in Z axis: 320 mm - Spindle to table distance: 0 – 375 mm - Spindle to column min. distance: 230 mm - Spindle to column max. distance: 685 mm - Table swivel: -45° to +45° - Milling head tilt: -90° to +90° - Automatic feed X axis: (8) 32 – 700 mm/min - Automatic feed Y axis: stepless mm/min - Number/size/spacing of T-slots: 16 mm - Motor power: 1.5 kW - Motor power S1 100%: 0.85 kW - Second spindle motor power: 1.5 kW - Dimensions (width): 1500 mm - Dimensions (depth): 1430 mm - Dimensions (height): 2100 mm - Weight approx.: 980 kg Scope of delivery: Pgsdjytfcvopfx Abpor - 3-axis digital display ES 12H - M16 drawbar - LED lighting - Coolant system - Automatic table feed for X axis - Automatic table feed for Y axis - Reducing sleeve ISO 40 / MT3 - Reducing sleeve ISO 40 / MT2 - Reducing sleeve ISO 40 / B18 - Long milling arbor 27 mm - Horizontal support - Legally required safety covers - Full technical documentation (DTR) in Polish - CE certificate - 24-month warranty for all components at no extra charge

Condition: excellent (used), Welding current max.: 5kA Welding force: 45-150N Closing stroke: pneumatic Welding pressure: pneumatic, resetting unit with disk spring Force adjustment: Proportional valve Electrode shape: cylindrical, 6mmØ --- Welding control: optional (according to recommendation) --- equipped with: - Base body with welding heads on aluminum - Modular design - Electrodes top and bottom with feed cylinder Psdpfx Abotq Ez Eepogr - Welding head top F120K with repositioning unit - pneumatic valve units - Pneumatic air cooling unit for electrodes - Workpiece carrier on dovetail guide, for exact positioning to electrodes positioning to electrodes --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock --- Further information on our homepage