Used Dovetailer for sale (176)

Year of construction: 2007, condition: reconditioned (used), Fully automatic dovetail cutting system: Double-pack type Tsdpfed Tipaox Airsd Machine has been disassembled Machine is being overhauled Specifications: Wood input length: min. 150 mm max. 1000 mm average 400 mm Wood cross-section: min. 20 x 40 mm max. 80 x 180 mm Wood output length: 6030 mm Max. wood cross-section with a 10 mm dovetail size: Hardwood 120 cm² Softwood 150 cm² Dovetail design: vertical and horizontal Adhesive type: PVAC white glue, two-sided glue application Electrical power: Connection voltage: 400 V Control voltage: 24 V 50 Hz System is completely wired up to the control cabinet. Dovetail length / possible wood cross-section and adhesive type can still be adjusted. Performance: 6 milling stations/min Working height: 960 mm Table width: 600 mm Glue application: double-sided Technical parameters: Input material: Input length of parts (min. - max.): 150-1000 mm Part width (min. - max.): 40-155 mm Part thickness (min. - max.): 20-80 mm Working height: 960 mm Bundle width: 600 mm Glue application: double-sided application (on both sides of the

Condition: used, Year of construction: 2000, Suitable specifically for turning out drillings on HM-equipped saw blades, CV saw blades and bases from a diameter of 80 to 800 mm Ø. Turning time with on and off clamping: 4 minutes drive power: 2.2 kW with stepless speed regulation via frequency converter Tjdpfx Ajz Sy Emoired Threading device: Equipped with a cross slide with adjustable dovetail guidance + locking levers Travel stroke X-axis: about digital display max 200 mm Y axis: about hand spindle 120 mm Magnetic holding force: 10 kg/cm² magnet: Suitable specifically for turning out drillings on HM-equipped saw blades, CV saw blades and bases from a diameter of 80 to 800 mm Ø. Dimensions W x D x H =: 1700 x 900 x 1750 mm mass: 650 kg

Condition: ready for operation (used), Compact Dovetail Machine Output: approx. 4–6 joints/min. For wood tenon and mortise joints Thickness: 30–120 mm Width: 75–250 mm Pressing force: 22.5 t Automatic glue application via 2 glue combs, used for processing PUR glue. Spring-mounted with a safety shut-off system that immediately stops the milling and glue application feed in the event of even the slightest load. All parts are chrome-plated. Electrical system with Siemens S7 PLC, year 2015 Milling motor output: 22.00 kW Hydraulic unit: 29.50 kW Oil cooler: 0.75 kW Infeed feed: 1.50 kW Outfeed feed: 2.50 kW Cut-off saw: 3.00 kW Total power consumption: 59.25 kW = 120 amps Tsdpfozmmr Rjx Airsd In the past, jöma has successfully delivered and installed 10 of these machines. We can supply all spare parts for the compact dovetail machine. We, jöma, have been supplying and repairing Cook Bolinder machines for 30 years.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Set for micro-dovetail jointing for high-volume and mass production Tjdpfx Aiex Idl Horjd Features: – High-performance production line, – Heavy-duty working units, – High feed rates, – Accelerated handling movements ensure high throughput. Depending on the desired output, additional buffer conveyors can be integrated to speed up the production process. TENONER FC-10KZ-6 Specifications Values Milling spindle 50 x 210 mm; 5,500 rpm Spindle motor 18.5 kW Chipper saw (special) 300/60 x 8 mm Saw motor 6 kW Working table width 600 mm Workpiece package height 30 to 150 mm PRESS FC-10PZ6 Specifications Values Board width/thickness 30-150 mm / 20-70 mm Finished board length 6,000 mm Line capacity up to 15,000 linear meters/shift The following modifications and upgrades have been made to the machine: - New electrical installation - Machine controller replaced with SIEMENS SIMATIC S7 and SIEMENS SIMATIC HMI panel - New infeed table before the tenoners with buffering system - New board turning mechanism – side feeder after tenoners (chain-driven turning mechanism controlled by frequency inverter) - New chain feeder before the press (length 4,500 mm) - Additional pre-scoring aggregates for finger-joint gluing – furniture board installed at the tenoners Machine dimensions: 16.5 m x 5 m

Condition: used, Year of construction: 2017, operating hours: 15,186 h, Equipment: documentation/manual, We are offering this used INDEX ABC 65 SL CNC lathe, manufactured in 2017. Machine type: ABC Year of manufacture: 2017 Operating hours (hydraulics): 15,186 Turret 1 with 7 stations, VDI 25, and W-gearing Tsdsz Ri Ibspfx Aired Synchronous spindle with chuck or collet possible! Turret 2 with 6 stations and dovetail mounting Powered tools on turret 2 Ejection blowing device Transmit function – Teleservice Three rear boring spindles for fixed tools Magazine above the main spindle Conveyor belt Chip conveyor, hinged belt – workpiece removal device – workpiece feed unit INDEX LMI bar feeder magazines If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2022, Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Materials to be slit: • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving the unwinding roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3”) cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6”) cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway allowing web threading at floor level while keeping full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Todpfsyx Uy Ajx Airjd Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: • Shear cut performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with a dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • A separator roller driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on materials). • Pressure is adjustable and synchronized with winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a transverse knife with linear motion and a backing plate for securing the web onto new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a centralized system or container (not included). Rewinding section: • Motorized turret (two-position) supporting two rewinding shafts. • Rewinding shaft drive by an oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, equipped with full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips with individual bladders.

Condition: used, Year of construction: 1993, Used Machine Year of manufacture: 1993 Features and technical specifications: - Machine bed cast entirely from gray iron in a single piece - With wide table supports and dovetail guides for the vertical slide - With control panel above the table Tjdpfx Aiozyy Dtored - Interchangeable spindle with MK 5, 30 mm diameter - Milling spindle swivel angle: 45°/22.5° - 2 motors: 5.5/7.5 kW – 400 V - 4 speeds without belt change: 3000–4500–6000–9000 rpm - Cast-iron table with table top extensions on both sides, 2150 mm - Solid cast-iron milling stop with quick adjustment (overall) and individual adjustment for both jaws - ELGO 89P23 control unit for height, tilt, and stop - Program memory for 99 programs - With sliding table insert - With Maka 4-roller feed unit - Dimensions L x W x H approx. 2150 x 1430 x 1740 mm - Weight approx. 1450 kg

Condition: good (used), Year of construction: 2001, functionality: fully functional, FMB MBZ 75 - 80, 5-axis FMB multi-machining center, Type MBZ - 2 / 72-80 / 5, Year of manufacture 2001, PC control with TFT color display, Travel range X/Y/Z 7000/1000/370 mm, Milling head with high-frequency spindle for aluminum, Spindle speed up to 18,000 rpm - 7.5 KW, Tool changer, 12-position, Tool holder HSK 40, 2-axis NC dovetail milling head, 8 pneumatic clamping elements, Swivel machining possible, Program generator, Tjdpfjzhuitjx Airjd FMB programming software, Pneumatic material stop, Measuring / probing device.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1700x750x1250 mm Weight 600 kg Tjdov A Hyqopfx Airod Total power requirement 3 kw

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, General Control system: SIEMENS 840 D Main spindle Bar capacity: 60 mm Speed: 6000 rpm Power: 29 kW Torque: 140 Nm Synchronous spindle Technology: Mounted on the turret Mount: Collet chuck, D = 42 mm Maximum speed: 4,500 rpm Turret 1 (X/Z) Technology: Tool turret with 8 stations Tool holder: For DIN 69880 - 25x48 mm Maximum speed: 6000 rpm Power: 3.3 kW Maximum torque: 7.5 Nm X-axis: 90 mm Z-axis: 280 mm Turret 2 (X/Z) Technology: Tool turret with 6 stations Tool holder: Symmetrical dovetail mount Speed: 4,500 rpm Tjdpszgcp Ssfx Airjd Power: 4.2 kW Torque: 7.5 Nm X-axis: 81 mm Z-axis: 80 mm Equipment Chip management: Hinged belt chip conveyor Coolant management: Coolant pump, 8 bar Part removal: Workpiece removal device Bar loader: Bar loader magazine LM 3200 Ejector: On the synchronous spindle

Condition: used, Year of construction: 1999, functionality: fully functional, Schmidler S4 Joinery Line - 4-strand transverse infeed conveyor (inclined upwards) - Infeed roller conveyor - Edge turning device integrated in the infeed roller conveyor - Zero point detection - Electronically controlled under-table swing cross-cut saw Saw blade diameter: 710 mm Swivel angle: 360 degrees Tilt angle: 0–65 degrees - Waste wood pusher - Marking pen, horizontal (from below) and vertical (from behind) - Universal milling unit incl. finger-joint cutter and dovetail milling head - Horizontal drilling unit – rafter nail drilling device - Vertical drilling unit Tedpfoya Dc Ijx Airod - Vertical profiling mill (lower position) for internal radii - Powered outfeed roller conveyor - Pneumatic push-off ruler - Transport and measuring system - Control system incl. color display Maximum workpiece dimensions: Height: 300 mm Width: 400 mm Length: approx. 12,000 mm 4-Side Planer – Schmidler Minimum workpiece dimensions: Height: 30 mm Width: 50 mm Feed speed: 9/18 m Planer shaft diameter = 140 mm 4-sided chamfering unit Infeed roller conveyor Outfeed roller conveyor with push-off ruler and storage rods Machine in good used condition, fully operational and in use. The machine can be inspected by appointment. Available for sale immediately or by arrangement.

Condition: good (used), Year of construction: 2010, functionality: fully functional, milling height: 180 mm, WEINIG NKT Dovetail Grooving Line – Double Unit DP20 Tsdpfx Ajz E Awqeirod An industrial dovetail grooving and gluing machine – developed for maximum precision and efficiency. Technical specifications: Wood input length: min. 130 mm | max. 1000 mm Wood output length: min. 3700 mm | max. 7400 mm (half lengths possible!) Wood cross-section: min. 20 x 40 mm | max. 80 x 180 mm Cutter diameter: 370 mm Dovetail design: Vertical / Horizontal, 10/11 dovetails, 3.8 mm pitch Glue application: 2-sided, PVAC white glue Connection power: 80 kW Note: The machine is currently disassembled and is in our warehouse. An inspection is possible by appointment. Scope of supply: WEINIG NKT Double Unit DP20 including control unit Integrated gluing station for 2-sided application Operating manual & documentation Hydromat 17B (7 spindles) General information Manufacturer: Weinig AG Model: Hydromat 17B // 7 spindles (various tools) Type: High-performance profiling milling machine / planing and rabbeting machine Year of manufacture: 1989 Operating voltage: 380 V / 50 Hz Bottom-Right-Left-Right-Left-Top-Bottom table, fixed Description Heavy-duty, high-performance planing and rabbeting machine made of vibration-damping and torsion-resistant cast iron components in a modular system. Designed for precise and economical woodworking with high continuous output. Mechanical feed, adjustable in the range of 5 – 35 m/min, feed motor 5.5 kW (7.5 HP). Surfacing table 2 m long, quick adjustment available. Chip removal for surfacing and jointing spindles, adjustment range 10 mm each. Technical data • Feed speed: 5 – 35 m/min, mechanical • Feed motor: 5.5 kW / 7.5 HP • Operating voltage: 380 V / 50 Hz • Table length: 2000 mm • Adjustment range of chip removal: 10 mm (surfacing and jointing side) • Machine design: Without counter bearing, in high-performance design

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2020x920x1160 mm Tedpfx Aev A Hywsirod Weight 680 kg Total power requirement 3 kw

Condition: used, FRT MicroSpy Device Designation: FRT MicroSpy Mobile Art. No. MSP 105 00 Device Number: MSP1033 FRT MicroSpy Mobile Portable Optical Profilometer for non-destructive 3D surface measurements directly on the component. Due to its portability, the MicroSpy Mobile is ideally suited for mobile use on large machines, vehicles, rollers, glass panes, or other large components. This enables high-resolution and non-destructive measurements on-site to determine important characteristics of surfaces, such as roughness, contour, topography, layer thickness, wear, load-bearing capacity, or volume. Smaller samples can be measured directly on the measuring table. Usable on large construction and machine parts Excellent resolution values Excellent reproducibility Non-destructive measurement Handles and adjustable support feet Low weight (approx. 5 kg) FRT Technical Specifications: Device: MicroSpy Mobile xy-travel range: 50 x 50 mm² xy-table Type: compact XY cross table with open frame Bearing: mechanical crossed roller guide Drive: DC motor with ball screw Travel range (XY measuring range): 50 x 50 mm² (or 20 x 20 mm² with CWL 3mm) Position measuring system: rotary encoder Measuring system resolution: 0.25 µm XY repeatability: < ± 1 µm Table height deviation (per axis): < 2 µm / 50 mm (of which is not reproducible): < 0.5 µm XY squareness: < 4 µm / 50 mm z-axis, motorized: Type Position Drive Travel range Position measuring system Measuring system resolution Axis straightness Gross adjustment, manual: Type: dovetail guide with fine drive Adjustment range: 25 mm Measurement: Minimum point spacing xy: 1 µm Sample size: - Sample weight: - Min. measuring speed: 1 µm / sec Max. measuring speed: 50 mm / sec Overall system: Total weight: approx. 150 kg of which measuring unit: approx. 5 kg Footprint measuring unit: approx. 0.3 x 0.3 m² Dimensions controller (W x D x H): approx. 0.65 x 0.65 x 1.0 (1.6) m³ Voltage supply EU version: 110 - 240V, 50 - 60Hz, z 16A Voltage supply US version: 110 - 240V, 50 - 60Hz, z 16A Power consumption: typ. 300-400 W Compressed air supply: - Ambient temperature: 22°C ± 5°C Temperature stability: < 0.5°C/h Environmental conditions: measuring room Scope of delivery: 1 x XY table with 50 x 50 mm² travel range 1 x Mobile base with electronics 1 x Chromatic sensor FRT CWL 600 µm 1 x Electronics for chromatic sensor 2 x Keys for computer 2 x Keys for rear door 1 x Power cord for power supply 1 x Mouse (PS/2) 1 x Keyboard 1 x 19'' TFT monitor Type: FRT MicroSpy Mobile Todezdnqcspfx Airsd Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2020x920x1160 mm Tjdpfjv A Hy Djx Airsd Weight 750 kg Total power requirement 3,2 kw

Condition: used, Workbench vice, parallel vice LEINEN with dovetail guide and height adjustment. Model: 125. Jaw width: 125 mm. Jaw height: 23 mm. Clamping range: max. 200 mm. Overall height: 550 to 750 mm. - 360° rotatable. - Dovetail guide. - Anvil surface for light straightening work. - Approx. 200 mm height adjustment without lift system. Weight: 44.5 kg. Good condition. Todpfx Aijy E T Dyjrsd

Condition: excellent (used), Year of construction: 2026, functionality: fully functional, Equipment: CE marking, TECHNICAL SPECIFICATIONS Maximum mounting hole dimensions: 3500 x 2500 mm Tedpeznv A Ujfx Airsd Minimum mounting hole dimensions: 250 x 350 mm Vertical cylinders: 2 pcs, ø 65/40 mm, stroke 1300 mm Total lifting capacity of vertical cylinders: 7.4 tons Horizontal cylinders: 2 pcs, ø 50/30 mm, stroke 1500 mm Total lifting capacity of horizontal cylinders: 2 tons Hydraulic unit 1.5 kW *The maximum size of the workpiece will be smaller than the maximum operating range of the press, depending on the type of joint (dovetail or pin) and the method of positioning the workpiece in the machine (pre-assembled or unassembled). PRESS DESCRIPTION • 3 positions for the lower beam • Pressure is adjusted directly from the hydraulic unit using a knob; the current pressure is displayed on an indicator during operation. • All electrical components are manufactured in accordance with European standards; each component has a code corresponding to the marking on the electrical diagram. • Hydraulic unit with a pump in an oil bath for better noise reduction and lubrication. A 1.5 kW motor is installed on the oil tank. • The rack and pinion system allows for precise movement of the upper beam. • The supporting structure is made of welded iron elements, Fe 430 grade. • Control panel: - Button for vertical movement of the beam - Button for vertical clamping - Button for opening the horizontal clamping corners - Button for horizontal clamping of the corners - Additional button for two-handed activation of the press functions Warranty: 12 months on spare parts

Condition: excellent (used), Year of construction: 2009, Bernardo FM 45 V drilling and milling machine. The FM 45 V drilling and milling machine offers an optimal price-performance ratio thanks to the standard spindle feed. The dovetail guide of the gear head ensures maximum precision and stability. Drilling capacity in steel 32 mm Drilling capacity in cast iron 40 mm Throat 260 mm Spindle speed (12) 50 - 2520 rpm Spindle mount MK 4 Quill stroke 120 mm Quill feed (3) 0.12 / 0.19 / 0.26 mm/rev Table size 820 x 240 mm Distance spindle / table 40 - 485 mm Travel path (x / y) 550 / 190 mm Height adjustment of milling head 400 mm T-slot size 14 mm T-slot distance 55 mm Motor output power S1 100% 0.85 / 1.1 kW (400 V) Motor input power S6 40% 1.1 / 1.5 kW (400 V) Machine dimensions (W x D x H) 1150 x 850 x 1450 mm Todpfxevutw Ho Airjd Weight approx. 285 kg Standard with automatic spindle feed and thread cutting device Large speed range 50 - 2520 rpm (12 levels) Dovetail guide for x, y and z axes, adjustable via wedge strips Versatile application options, slot milling, face milling, boring,.... Solid large cross table, precisely surface-machined Milling: spindle feed via handwheel Drilling: spindle feed via handwheel High-quality aluminum motor, designed for continuous operation Stable and vibration-free cast design Simple and quick speed change using a gear lever Pivoting milling head for angle drilling, milling bevels, etc. Location: from stock 54634 Bitburg - available at short notice -

Condition: used, functionality: fully functional, Metering and application system Hydrotop 1 E400R + Ecotac_C for single-component (1K) PUR edge gluing for package dovetail joint systems Glue application – dovetail joint Adhesive application – dovetail joint Tedoul Shnspfx Airjd in very good condition functionality tested

Condition: used, Lista drawer cabinet with milling tools Lista drawer cabinet Number of drawers: 13 Type of extension: Full extension Very high load-bearing capacity due to precise and stable construction made of high-quality, welded sheet steel Color of cabinet: Reseda green, RAL 6011 Load capacity per drawer: 200 kg External dimensions W x D x H: 720 x 710 x 1000 mm Contents: Metal circular saw blades Todpfx Aisq Aa I Tsrjd Disc milling cutters, cross-toothed and coupled Disc milling cutters, cross-toothed Angle, semi-circular milling cutters Dovetail milling cutters Semi-circular milling cutters Thread milling cutters More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2006, Timber processing machine Manufacturer: Hundegger Type: K2-4-450 Year of manufacture: 2006 Technical data - Maximum timber length for feeding: 13 m - Maximum timber length for stacking: 12 m - Color: RAL 5012 blue - Infeed cross conveyor, 5 strands, horizontal, 2.2 m with flat belt chain - Infeed strand with shaft extension - Extension support with infeed device - Undercarriage swivel miter saw - Universal milling machine, 4-axis, UF4 - Roller cutter - Finger cutter - Dovetail cutter - Combination support for vertically operating tools - Drilling unit, 2.2 kW - Drilling unit, 3.0 kW, reinforced - Combination support for horizontally operating tools - Drilling unit, 2.2 kW - Slotting unit - Marking unit - Stacking table, 6-arm - Fully automatic beam turning station, pneumatic - Refined timber support surfaces Tjdpezzcx Aofx Aired - Label printer Note: The technical data and descriptions are a verbatim transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: good (used), total height: 2,500 mm, total length: 5,300 mm, total width: 2,500 mm, feed length X-axis: 1,550 mm, feed length Y-axis: 600 mm, grinding height: 800 mm, overall weight: 7,800 kg, GER RS 15/60 grinding machine Table 1500 x 600 mm Tsdpfx Aovli H Soirjd X-axis travel 1550 mm Y-axis travel 600 mm Maximum grinding height 800 mm Wheel size 400 x 100 mm Automatic infeed Yes Dovetail accessory Yes Cooling system Yes Machine dimensions (width x length x height) 2500 x 5300 x 2500 Weight 7800 kg

Condition: repair required (used), functionality: unexamined, Dovetail slotting machine for wood packages dimter HK 400 Dovetail slotting machine Input lengths: 800–6000 mm Cutting height: 285 mm, optionally 300 mm Color: Blue Consisting of: Pos. 01 Packaging unit Pos. 02 Package roller conveyor Pos. 03 Central milling cutter Tsdpjvi Hw Njfx Airsd Pos. 04 Package roller conveyor Pos. 05 Package singulation unit Pos. 06 Chain cross conveyor Pos. 07 Infeed roller conveyor Pos. 08 Cycle press Pos. 09 Feed unit Pos. 10 Cut-off saw Including control cabinets and operator panels The machine requires repairs and is sold in its current condition. It has already been dismantled and is stored in Achern. All technical documentation is available. We are available at any time to answer questions about the machine and provide technical information. We will provide consulting support for repair and reassembly.

Condition: refurbished (used), DKV III continuous press with braking unit Completely overhauled Optional with original hydraulic motors or with servo motors Options: - Chain threading - Co-rotating cut-off saw Tjdpfx Aov T Aqyoirsd Function: For pressing the dovetail joint without stopping (in a continuous process). The upper and lower plate chains generate the feed force. Downstream braking plates transmit the required longitudinal pressing force to the wood through friction. Advantages: - High performance despite a relatively slow feed rate - Absolutely no vertical displacement of the dovetail joints Technology: Heavy-duty plate chain 2", pneumatically adjustable Braking elements are floating Press force measurement via contact manometer Height adjustment electrically Maximum press force adjustable and dependent on feed rate and wood cross-section, 4500 daN at 32 m/min 2200 daN at 70 m/min Feed rate adjustable 10-70 m/min Drive power Adjustment of infeed unit 1 kW Adjustment of brake 1 kW Hydraulic motors 45 kW Technical data: Wood width 90 - 180 mm Wood thickness 20 - 80 mm Ratio thickness - width 6 : 10 Wood cross-section with 15/16.5 mm tenon max. 90 cm²

Condition: used, Year of construction: 1997, - Feeding and transport - Milling machine combination with glue application - Transfer station - Infeed station - End face press with stacking Dovetail tenon machine Manufacturer: Grecon Year of manufacture: 1997 Space requirements for operation and maintenance Length 18500 mm Width 6500 mm Height 2000 mm Weight and floor load Total weight 10500 Kg Floor load dyn. 25 N/cm² Wood data Wood type: Softwood or hardwood Length (min/max) 150 / 2000 mm Width (min/max) 50 / 205 mm Height (min/max) 35 / 50 mm Output length (min/max) 3000 / 6000 mm Machine components Feeding and transport Conveyor belt Type: FB 600 / 1000 Powered conveyor belt with fixed and foldable side guides and a retractable stop for aligning the packages. Technical data Length 1100 mm Tedpfxjzuyw Ao Airod Width 950 mm Height 1000 mm Power consumption 1.1 kW Feed speed 75 m/min Milling machine Turbo milling combination Type: FDL-F-205/600/500 Two combined milling machines in a heavy-duty design with adjustable tables as workpiece supports, guided by a stable combined ball bearing and roller guide. Each milling machine is equipped with a clamping station, the trimming unit, and the milling unit. Either the second milling machine or both milling machines are equipped with a glue application system. The milling machines can be equipped with a scoring saw. Belts between the milling machines minimize package transport times, thus achieving a fast throughput. A pneumatic vibrating device in the clamping station ensures even alignment of the wood. Horizontal and vertical pressure devices clamp the package. The trimming unit is used to cut a reference edge on the workpiece. This reference edge determines the length of the respective dovetail tenon profile and can be adjusted. The dovetailing is carried out by the milling unit, followed by glue application via a side jet or roller applicator. Technical data Power consumption 63 kW Compressed air consumption 350 NL/min Exhaust diameter 2 x 250 mm Exhaust volume 10600 m³/h Drive Motor 1: Table feed, milling table Manufacturer: SEW Power consumption 1.5 kW Speed 71 rpm Motor 2: Belt drive Manufacturer: SEW Power consumption 1.1 kW Speed 227 rpm Motor 3: Trimming unit motor Manufacturer: Walter Power consumption 5.5 kW Speed 2880 rpm Motor 4: Milling spindle motor Manufacturer: Behnke Power consumption 22.0 kW Speed 3000 rpm Transfer Transfer station Type: ÜL WB 600/1000 Transfer station designed in a robust welded construction with an infeed belt, alignment stop, cross-feed unit, turning device with turning brush, and an outfeed belt, as well as adjustment devices for optimal adaptation to different wood dimensions. The packages of workpieces, which have been milled, are transferred from the milling table of the dovetail tenon milling machine to the conveyor belt of the transfer station and aligned flush with a stop. The aligned wood package is moved transversely to the infeed direction into the area of the turning device by the cross-feed unit. The separation of the wood package is carried out either directly onto the outfeed belt or by turning it 90 degrees and aligning it with a fixed edge. The discharge edge can be adjusted to the wood dimension. The separated wood is transported to the infeed station via a fast-moving conveyor belt. Technical data Power consumption 2.5 kW Compressed air volume 12 m³/h Feed speed 75 m/min Infeed station Infeed station Type: EKK 205 Infeed station with a side chain guide for transporting the separated pieces of wood.