Used Dowel Insertion for sale (2,307)

Year of construction: 2007, condition: refurbished (used), We have a Mueller Apparatebau single sheet feeder transactional channel available. Meant for feeding - reading a reading code - collating - folding A4 documents and place it into a Buhrs ITM inserter but you can also use it stand-alone or connect it to a other brand machine. Bedpod Ddkbefx Agkjdi

Year of construction: 2014, condition: excellent (used), Automatic Postbox traying system for envelope inserting systems. This SIMA 220 was connected to a Buhrs BB700 inserting systems, therefore it is blue. Installed in 2015 and just in use for 16 months! More pictures available on request! Description: Adjustable in height 600 mm up to 900 mm. Gathering section – with buffer for post boxen Automatic fillingstation for postboxes Automatic change of postboxes. Max 10 Postboxen can be in feeder Touchscreen – simple, and user-friendly user interface Complete with connection from envelope inserter - connection with all inserters possible! Bdsdpfod Etadox Agkei Format max.: 180mm x 285mm Format min.: 90mm x 145mm Speed: up to 20.000 envelopes per hour Envelope thickness max.: 8 mm Postbox change-over time: ca. 1,8 sec (max 2000 boxes per hour) Post boxes: Deutsche Post, Postcon, Schweizer Post, Oesterreichische Post, Belgische Post, Hollaendische Post, USPS Trays, Pin Boxen. Electrical connection: 16A, 400/230V, 4kW Pressure air: 6bar, 200l/min Connection: To all inserting systems possible The sima Automatic Mail Delivery lines up with any inserter and automates the presorting and letter tray preparation processes. The delivery checks for open flaps, non-readable addresses, and IMB Barcodes then automatically rejects any letter that should not be delivered. Various reading systems are available for the sima, from simple print mark readers up to a server based OCR/IMB reading system connected to the Digital Front End. Our patented collection unit safely stacks the envelopes individually- without contacting each othermaking twisting or interleaving almost impossible. The envelope stack is quickly pressed before filling the letter trays in accordance with USPS regulations (DMM). The exchange of letter trays occurs automatically with an exchange speed of up to 1,800 boxes/h (2.0 sec). The tray exchange unit can handle MM and EMM letter trays. A unique feature is its ability to intermix one and two foot letter trays depending to the presorting need. As an option, a postcode label printer can be integrated into the sima, which applies a tray label to the letter tray. The filled letter trays are temporarily stored on a large buffer section. The Sequence Repair System (SRS), which marks or separates mails that do not belong to the actual mail sequence, comes standard on this machine. The sima can instruct the operator what to do with the marked or separated mail. This SRS enables a constant production speed even when sequence problems ap

Condition: new, 10x20m storage platform, load: 500kg/sqm lower edge: 2.5m, approx. 200sqm system platform Data: - Length : approx. 10m - Width : approx. 20m - Lower edge of platform : approx. 2.5 m - Top edge of stage : approx. 2.88 m - Total area : approx. 200 sqm - Load : 500 kg / sqm - Covering : 38 mm chipboard P6, top natural, bottom white. - Support grid : 5.0m x 4.0m - NO CROSSES, bracing with dome brace. - New ex works plus freight depending on zip code. Scope of delivery : - 20 x C profile 4000 mm , sendzimir galvanized . - 52 x S profile 4800 mm , sendzimir galvanized . - 18 x support 2500 mm , RAL 7016 . - 03 x strut brace 2517 mm , RAL7016 . - 93 x chipboard 2400 x 1000 x 38 mm natural/white P6 . - 18 x Lining plates for supports . - 18 x Set of dowels for supports . Price : 20.609 € net Bodpfx Ags Ahny Eokedi plus statutory VAT. You will receive an invoice with VAT shown. Optional on request : - collision protection - railing - Transfer station - Stairs - ground anchor - Steel construction can be coated in any RAL color. (standard RAL7016) Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, 5x10m storage platform, load: 500kg/sqm lower edge: 2.5m, approx. 50sqm system platform Data: - Length : approx. 5m - Width : approx. 10m - Lower edge of platform : approx. 2.5 m - Top edge of stage : approx. 2.88 m - Total area : approx. 50 sqm - Load : 500 kg / sqm - Covering : 38 mm chipboard P6, top natural, bottom white. - Support grid : 5.0m x 5.0m - NO CROSSES, bracing with dome brace. - New ex works plus freight depending on zip code. Scope of delivery : - 04 x C profile 5000 mm , sendzimir galvanized . - 14 x S profile 4800 mm , sendzimir galvanized . - 06 x support 2500 mm , RAL 7016 . - 03 x strut brace 2517 mm , RAL7016 . - 24 x chipboard 2400 x 1000 x 38 mm natural/white P6 . - 06 x Lining plates for supports . - 06 x Set of dowels for supports . Price : 7.575 € net plus legally valid VAT. You will receive an invoice with VAT shown. Optional on request : - collision protection - railing - Transfer station - Stairs - ground anchor - Steel construction can be coated in any RAL color. (standard RAL7016) Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Bsdpfx Aj Ahnz Rogkjdi Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, functionality: fully functional, Offered for sale is a semi-moist pet treat production equipment set based on a twin-screw extruder, designed for continuous forming, portioning, and cooling of semi-moist products. The line has been dismantled and is ready for shipment. It was purchased from a supplier and not used in production, but the configuration is equivalent to machinery currently operating in active plants for semi-moist pet treat manufacturing. This system addresses the key process steps that define semi-moist product quality and handling: stable solids dosing into the extruder, controlled shaping and cutting, as well as staged cooling to stabilize texture and reduce sticking or deformation before packaging or further processing. The extruder is of twin-screw design and has achieved production capacities of up to 150 kg/h, depending on recipe and configuration. Product shaping is highly flexible and can be adapted to a variety of product formats; it is suitable for dental sticks, hearts, bones, sticks, strips, and other geometries depending on the die/forming set and cutter configuration. The configuration line has been used for high meat meal or grain-free semi-moist treats as well as vegetarian-type items; final product characteristics depend on recipe, moisture targets, and process parameters. Dry base components are supplied using a volumetric or mass-based dosing feeder, feeding directly into the extruder. This enables steady extrusion and consistent shaping. Downstream portioning is performed with a rotary knife cutter fitted with specialized inserts for clean cutting of semi-moist products. Cut length can start from approx. 5 mm and can be adjusted as required; achievable range depends on settings and the cutter head. The cutter head concept is flexible and can be adapted or redesigned depending on desired final product and surface finish for different shapes and recipes. Bdjdpfxjycfw Ej Agkoi After forming and cutting, product is conveyed through an initial cooling section with a fan, followed by a conveyor cooler for further stabilization. Cooling is based on ambient forced air, with cooling performance managed by conveyor speed (residence time) and airflow. This two-stage cooling process is optimal for semi-moist products, helping to prevent clumping, deformation, or marking during handling and transport. A notable feature of this line is the mixing head at the extruder outlet, which supports improved mixing and temperature control and enables production of two-color treats (application dependent). The sale also includes the liquid handling package used in semi-moist processing—stainless steel pumps and tanks for water, fats/oils, glycerol, and other typical process fluids. All liquid handling components are stainless steel, meeting hygienic production standards.

Condition: used, ISO 40 collets, various clamping devices, cutting inserts Bsdpfx Ao Ahq I Ajgksdi two cabinets

Condition: new, 10x10m storage platform, load: 500kg/sqm lower edge: 3m, approx. 100sqm, system platform Data : - Length : approx. 10m - Width : approx. 10m - Lower edge of platform : approx. 3.0 m - Top edge of stage : approx. 3.38 m - Total area : approx. 100 sqm - Load : 500 kg / sqm - Covering : 38 mm chipboard P6, top natural, bottom white. - Support grid : 5.0m x 5.0m - NO CROSSES, bracing with dome brace. - New ex works plus freight depending on zip code. Scope of delivery : - 08 x C profile 5000 mm , sendzimir galvanized . - 28 x S profile 4800 mm , sendzimir galvanized . - 09 x Support 3000 mm , RAL 7016 . - 03 x dome strut 3049 mm , RAL7016 . - 47 x chipboard 2400 x 1000 x 38 mm natural/white P6 . - 09 x Lining plates for supports . - 09 x Set of dowels for supports . OUR PLANNING DEPARTMENT WILL BE HAPPY TO PROVIDE YOU WITH A NON-BINDING QUOTATION TAILORED TO YOUR REQUIREMENTS. Price : 13.167 € net plus statutory VAT. You will receive an invoice with VAT shown. Optional on request : - collision protection - railing - Transfer station - Stairs - ground anchor - Steel construction can be coated in any RAL color. (standard RAL7016) Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : Bjdpfx Aj Ahn Dwogkjdi If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: used, machine/vehicle number: 006601, Position 1: Panel Feeding and Loading PRIESS-BMA DLS-CNC Bdodpfx Aewuclregkoi Position 2: CNC Flexible Drilling & Inserting PRIESS-BMA DLS-CNC

Condition: new, 5x15m storage platform, load: 500kg/sqm lower edge: 3m, approx. 75sqm, system platform Data : - Length : approx. 5m - Width : approx. 15m - Lower edge of platform : approx. 3.0 m - Top edge of stage : approx. 3.38 m - Total area : approx. 75 sqm Bsde Ahnzxopfx Agkedi - Load : 500 kg / sqm - Covering : 38 mm chipboard P6, top natural, bottom white. - Support grid : 5.0m x 5.0m - NO CROSSES, bracing with dome brace. - New ex works plus freight depending on zip code. Scope of delivery : - 06 x C profile 5000 mm , sendzimir galvanized . - 20 x S profile 4800 mm , sendzimir galvanized . - 08 x Support 3000 mm , RAL 7016 . - 03 x dome strut 3049 mm , RAL7016 . - 24 x chipboard 2400 x 1000 x 38 mm natural/white P6 . - 08 x Lining plates for supports . - 08 x Set of dowels for supports . OUR PLANNING DEPARTMENT WILL BE HAPPY TO PROVIDE YOU WITH A NON-BINDING OFFER TAILORED TO YOUR REQUIREMENTS. Price : 9.913 € net plus statutory VAT. You will receive an invoice with VAT shown. Optional on request : - collision protection - railing - Transfer station - Stairs - ground anchor - Steel construction can be coated in any RAL color. (standard RAL7016) Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: used, Year of construction: 2020, machine/vehicle number: INC36, Used Apsol case packer - year 2020Technical Specifications & Performance DataThis Apsol Case Packer is a robust secondary packaging solution engineered ( including former, inserter, and sealer) for continuous-duty industrial packaging and beverage production environments. Built in 2020, it combines reliability with efficient throughput for used bottling line upgrades and second hand packaging machinery projects. Each format has its own pick-up head, specific to the product. For the formats used the configuration was: 6x2.Manufacturer: ApsolMachine type: Automatic Case PackerYear of construction: 2020Production capacity: 7–9 boxes per minuteRated voltage: 400 V ACFrequency: 50 HzPower: 26.5 kWFull load current: 49 AElectrical phases: 3ph + N + GNDShort-circuit rating: 10 kAProtection rating: IP54Compliance: CE markedAdvanced Automation & Control SystemsEngineered for dependable, automated case handling, this case packer supports stable, repeatable performance with CE-compliant electrical architecture. The machine’s power and control specifications (400 V, 50 Hz, three-phase) align with standard industrial automation environments, facilitating straightforward connection to existing line controls and supervisory systems. Safety-rated circuits and integrated protections support safe operation and ease of maintenance within modern packaging lines.Production Line Integration CapabilitiesDesigned for flexible line layouts, the Apsol Case Packer integrates upstream with fillers, labelers, and conveyors and downstream with case sealers, printers, and palletizers. It is suitable for beverage production and industrial packaging scenarios where bottles, cans, or jars are collated and loaded into cartons or cases. Its balanced throughput of 7–9 boxes per minute helps harmonize line speeds without creating bottlenecks.Machine Condition & Maintenance HistoryManufactured in 2020, this second hand machine is offered in working condition and ready for operation. The electrical specifications confirm contemporary design standards, supporting efficient recommissioning within a used bottling line or as a standalone case packing asset.Operational Performance & VersatilityThe machine’s performance profile is well-suited for beverage packaging applications, including the collation and loading of PET or glass bottles and aluminum cans into cases, as well as general industrial packaging tasks. With its steady output range, it fits small to mid-speed lines seeking reliable case packing with consistent pack quality and minimal downtime.Installation Requirements & Site PreparationInstallation requires a three-phase 400 V, 50 Hz electrical supply with sufficient capacity for the 26.5 kW load and 49 A full-load current. Plan for appropriate floor space to accommodate infeed and outfeed conveyors and to allow safe operator access for changeovers and routine service. The IP54 protection rating supports installation in typical product... Bdedpfx Ags Adt Nnekji

Condition: used, Year of construction: 2001, spindle diameter: 40 mm, total width: 2,000 mm, total height: 1,900 mm, total length: 3,800 mm, overall weight: 3,500 kg, input voltage: 400 V, number of spindles: 5, input frequency: 50 Hz, No. 04556 Four-sided planer WEINIG Unimat 23 E Used, year of construction 2001 Spindles (bottom - right - left - top - bottom) All spindles Ø 40 mm, spindle motors with mechanical brake 1. Bottom spindle (surfacing spindle): 5.5 kW, with rebating device 2. Right spindle (jointing spindle): 7.5 kW 3. Left spindle: shared drive with right spindle (7.5 kW) 4. Top spindle: 5.5 kW 5. Bottom spindle: 11 kW Spindle speed 6000 rpm Working range Workpiece width with tool diameter 140 mm: 20 - 230 mm With aluminium planing heads, a working width of 260 mm is possible Workpiece height with tool diameter 163 mm: 8 - 120 mm Infeed table with jointing fence, length 2,000 mm Control and adjustment ATS positioning control with Siemens SIMATIC OP7 operator panel Left spindle: automatic positioning forward - backward Top spindle: automatic positioning up - down Motorised height adjustment of the feed, 1.1 kW adjustment motor with brake Mechanical digital readouts on the spindle adjustments Feed Feed motor 3 kW with brake Feed speed 6 - 36 m/min, infinitely variable via handwheel Serrated feed rollers, driven by cardan shafts Short workpiece package for processing short pieces Top pressure rollers, swing-away Axial adjustment of the feed rollers relative to the left spindle Pneumatic pressure system with pressure reducing unit, 3 pressure regulators with gauges on the control desk Pressure shoes and tables Pressure shoe before top spindle, swing-away Pressure shoe after top spindle with wooden insert Table plate with wooden insert at bottom spindle 5 Anti-kickback device on the infeed table Manual Waxilit pump for removing resin from the table Central lubrication points on the front of the machine Safety and noise protection Full soundproof enclosure with viewing window and interior lighting CE marking, BG-tested (wood dust tested) Chip extraction connection diameters 140 mm and 200 mm Power supply 400 V / 50 Hz Scope of delivery 5 planing heads, mounted on the spindles Various spare parts: feed rollers, spacer rings, drive belts, table inserts, operator tools Bedpfe Afb Eaex Agkodi Complete technical documentation Transport dimensions approx. 3800 x 2000 x 1900 mm LWH Weight approx. 3500 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: used, Year of construction: 2005, machine/vehicle number: M272, Used Filling Monoblock GAI 2405 1500 bph pre-owned monoblock filler / used bottle filling triblockThis Monoblock offers, therefore, a highly specialized solution for bottling still wine in glass containers, designed to meet the needs of technical precision and production continuity for industry operators. GAI manufactured this machine in 2005, and it achieves a filling speed of 1500 bottles per hour, which ensures, in turn, high efficiency for medium-capacity production lines. As a monoblock filling machine (often searched as a used bottle filling triblock integrating rinser, filler, and capper), this pre-owned solution is ideal for wineries seeking a compact, reliable monoblock filler within a single frame.Filling Specifications of the Used filling monoblock GAI The filling system of the GAI 2405 monoblock, meanwhile, delivers high precision in handling the product, maintaining consistent operating conditions. This model, in particular, uses 12 gravity or light depression filling valves, which effectively prevent turbulence or alteration of the still wine during processing. The filling valves, consequently, stay in a fixed position, reducing the risk of contamination or leaks. As a gravity/light-depression system, it is not an isobaric configuration, making it well-suited to still products while remaining compatible with ancillary options such as a nitrogenator upstream or downstream if the line owner wishes to manage dissolved oxygen more tightly. These traits make it highly competitive among monoblock filling machines for still beverages.Rinsing Section The Used Filling Monoblock GAI 2405 1500 bph rinsing system includes 12 grippers that perform a cleaning treatment for each bottle. The system, thus, completes rinsing in a single phase, which removes any residual particles inside the containers before filling. This single-treatment configuration, additionally, optimizes processing time and improves overall speed without compromising quality. In the context of a compact used bottle filling triblock, this integrated rinser enhances hygiene while maintaining a streamlined footprint.Capping Features The capping section of this model of Used filling monoblock GAI supports straight corks and includes one head for cork insertion, which enables the production of still wine in formats of 0.75 L, 1.0 L, and 1.5 L. This head is specifically designed to drive the corks into a flush-fitting position. This feature of operating with straight corks, as a result, ensures adherence to the traditional characteristics of the final product and, in turn, meets specific market demands. Within a monoblock filling machine architecture, this single-head corker provides dependable, repeatable cork application aligned with premium still-wine presentation.Design and Structure The Monoblock features a design that ensures long operational life and easy maintenance. Operators can access each component for cleaning and inspection, allowing for safe and efficient management of the machine. Moreover, the integration of rinsing, filling, and capping sections into a single unit reduces the machine’s footprint, which, therefore, optimizes space in the facility. The turret rotation is clock... Bede Adywrjpfx Agkodi

Condition: excellent (used), Year of construction: 2003, Veneer saw Langzauner LZ 5/2 - 3500, precision cutting saw with jointing unit (planer unit) and veneer support table Robust machine construction by Langzauner A video of the machine in operation can be sent upon request. For tear-free and gap-free cutting of veneer, including thick veneer Cutting length max. 3500mm Cutting and jointing height max. 40mm Easy-to-guide unit, runs on two hardened, ground linear guide shafts Rear support table with continuous finger stop, adjustable from approx. 2 - 56cm, with pneumatic clamping and digital display The crosscut table is very solidly constructed and runs on parallel circular guides; it is slightly offset to the right so that crosscuts can be made on the left side of the veneer packs Bsdpe Afznuofx Agkjdi Angle stop on the support table and on the front support for end cuts of the veneer packs Special equipment with rack-and-pinion compensation for the pressure bar, which prevents the pressure bar from tilting pneumatic workpiece clamping, also holds in the center position Drive motor saw 2.2kW, milling unit 1.1kW The motors can be easily switched on at the handle, so they only run when needed. When switched on, the saw and the milling unit are automatically engaged by compressed air; the cutting height can be selected in three positions using a turret stop. Carbide-tipped precision cutting blade, sharpened Planer head Z4 with pull-cut, equipped with new carbide inserts and spare blades included Practical front veneer support, automatically extended pneumatically when the planer unit is used Dust extraction connection 150mm with dust extraction channel V-belt renewed CE marking Emergency stop cable Operating manual Onboard tools Original paint, only a few spots have been touched up The machine is in excellent condition and has obviously only been used rarely. Dimensions approx. 5050 x 1500 x 1450mm (LxWxH). Weight approx. 1000kg. The machine can be demonstrated on site by appointment. We only offer machines that are available in our warehouse and ready for demonstration; see "other offers from this provider".

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT21001013056, empty load weight: 3,290 kg, maximum load weight: 9,800 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 05/2023, next inspection (TÜV): 03/2027, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 1,060 mm, total length: 9,690 mm, total width: 2,550 mm, total height: 3,580 mm, suspension: air, tire size: 235/75 R17,5", color: yellow, Please note: the images are archive photos. The vehicle may be in use! #Chassis centre-axle trailer - Fine-grain steel welded construction - Outer frame slightly inclined, new design with "Load-Lock-Profil" for lashing straps - 1 pair of geared landing legs at front, straight lower section, one-side operation on the right in direction of travel - Side door stays, steel underrun protection - Anti-spray mud flaps on last axle only, rear impact protection - Spare wheel carrier (1 wheel) with fastening kit - Platform height 1060 mm #Towing equipment - Drawbar with approved 40 mm drawbar eye, haulage version - Drawbar height mechanically adjustable via threaded spindle, below floor level, max. range 200 mm - Drawbar length mechanically adjustable approx. 1950 - 2300 mm, lockable approx. every 50 mm, set to approx. 2100 mm #Axles + suspension - BPW axles at manufacturer's choice, tapered roller bearings, S-cam brakes - Axles/running gear laser-aligned: reduces tyre wear and fuel consumption - Air suspension #Braking system - 2-line compressed-air braking system, colour-coded lines for easy servicing, spring-brake parking brake - Duomatic connection at front, with connecting line to the truck - EBS, electronic braking system with EBS connector at front - Please note: only to be towed by vehicles ensuring ABS effectiveness! - Raise/lower valve, vehicle stability system #Wheels and tyres - 235/75 R17.5, make at manufacturer's choice, steel rims, factory silver #Electrics - 24 V, multi-chamber lamps Bodj Afwuzepfx Agksdi - Yellow LED side lighting, also coupled with indicators (flashing side marker lights) - 2 white front position lights, 2 white/red outline marker lights at rear - 1 x 15-pin connector at front - 2 additional LED work lights at rear, switched via reversing light #Floor - Film-faced plywood approx. 30 mm, for high point loads - Premium floor sealing, floor jointed all round - Platform length approx. 7,300 mm #Front wall / front corner posts - Through-loading via double-leaf front portal doors, each with 2 internal cam bar locks - Steel corner posts, release device for side tarpaulin - Bridge plate approx. 2,400 mm wide, divided once, approx. 350 mm long for resting on tail lift, capacity approx. 1,800 kg, incl. tail lift support - (Drawbar length then approx. 2300 mm; with 2000 mm tail lift, coupling set-back on truck min. 20 - max. 240 mm) #Side boards - 25 mm aluminium hollow profile, 400 mm high, drop-down and removable #Centre stanchions - 1 pair of sliding stanchions, movable along entire length #Insert slats - Wooden insert slats #Rear wall / rear corner posts - Steel corner posts up to lower edge of roof - Tarpaulin attachment with round tube and tensioning ratchet - Double-leaf rear portal doors, each with 2 internal cam bar locks #Tarpaulin - Tarpaulin with welded-in horizontal and vertical straps, stainless steel tensioning buckles - Customer lettering Dachser on side tarpaulins and rear portal #Roof - Fixed roof with tarpaulin and roof bows, tarpaulin colour: white - Optimised rain gutter at rear on end bow, above doors #Country of registration / plates - Germany, Dekra inspection and expert report (§13 EG-FGV) - Fliegl manufacturer's certificate for body strength acc. to EN 12642 XL

Condition: used, Meat without bone, sausages, cheese or fish. Max. deposit length: 1.000 mm Max. Diameter deposit: (l x w): 320 x 130 mm Max. slice thickness: 0,5 – 25 mm Bodpfxe Afxh Ee Agksdi Max. number of slices per minute: max. 2.640 Min. product temperature: - 4°C overall dimensions (l x w x h) : ± 2.519 x 962 x 2.137 mm + Scale + Insert belt

Condition: used, maximum load weight: 13,609 kg, overall weight: 16,000 kg, first registration: 01/2018, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,470 mm, loading space volume: 45 m³, total length: 7,450 mm, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2018, Container No. G0123024_1 – Manufacturer: Kögel. * Sliding roof tarpaulin * Double corner fittings * Insert strip (wood) * Outline marking, side/rear * Load certificate, Code-XL * Multi-hole strip * Portal door with double rotating rod locks (inside) * Side sliding tarpaulin Bdjdpfx Ago Agd Hwekei * Forklift drivable * Fixed support legs * Device for rail loading * Lashing options * Perforated pallet stop strip Roof tarpaulin used. Financing available upon request. Financing possible. Delivery time: IMMEDIATELY AVAILABLE. Multi-Lock outer frame. Tarpaulin used. Technically ready for use without further repairs. Substructure with signs of use. Valid UVV certification. UVV documents available. Exchangeable container with lettering (see photos). LASI CODE XL!!! Multiple units available! Dimensions are approximate. Offer subject to change; prior sale reserved. Prices are net ex works D-59302 Oelde. Further details available upon request by telephone or email.

Condition: new, functionality: fully functional, Year of construction: 2026, CORMAK 2000 kg Electric Pallet Truck The CORMAK 2000 kg electric pallet truck is designed for horizontal pallet transportation in warehouses, wholesale facilities, and manufacturing plants. Its electric drive and lifting system reduce operator effort when moving loads weighing up to 2 tons. Key Benefits of the CORMAK 2000 kg Electric Pallet Truck - 2000 kg load capacity – enables the handling of heavy pallets containing materials, components, and finished products. - 850 W drive motor – allows loads to be transported without manually pulling or pushing the pallet truck. - 700 W lifting motor – enables electric fork lifting without manually pumping the tiller. - 1150 mm long forks with an overall width of 550 mm – suitable dimensions for handling EURO pallets. - 48 V battery power supply – allows goods to be transported without a power cable restricting the travel route. Bjdpfxo Aa Nybs Agkjdi Design and Technology – Electric Drive and Wheel System The battery-powered pallet truck uses separate motors for driving and lifting. The travel speed is 4 km/h when loaded and 4.5 km/h when unloaded. The polyurethane wheel system includes a front wheel measuring 160 × 55 mm and rear rollers measuring 80 × 70 mm. The 1x/4 wheel configuration consists of one drive wheel and four load rollers. Operating Efficiency and Pallet Handling When fully lowered, the forks are positioned at a height of 80 mm, making it easier to insert them underneath a pallet. The maximum lifting height of 195 mm allows loads to be raised for transportation. The overall length of 1700 mm and width of 550 mm make it possible to account for the truck's dimensions when planning storage areas, loading stations, and transport routes. Applications – 2-Ton Electric Pallet Truck for Warehouses and Production Facilities The equipment is designed for transporting incoming deliveries, supplying production workstations, and transferring finished pallets to dispatch areas. The electric pallet truck is particularly suitable for repetitive transport operations where operators regularly pick up, move, and set down loads. Standard Equipment - Electric drive and lifting system. - Battery charger. - Electromagnetic brake. - 1150 mm long forks. Technical Specifications Load capacity 2000 kg Turning radius 1300 mm Raised fork height 195 mm Lowered fork height 80 mm Fork length 1150 mm Overall fork width 550 mm Wheel diameter Ø160 × 55 / Ø80 × 70 mm Battery voltage / rated capacity 48 V / 10 Ah (equivalent to 24 V / 20 Ah) Operating time on a fully charged battery Up to 3 hours Charging time Approx. 2.5 hours Brake Electromagnetic Travel speed, loaded / unloaded 4 / 4.5 km/h Maximum gradient, loaded / unloaded 6% / 10% Wheel material Polyurethane Weight 118 kg Dimensions 1700 × 550 × 1250 mm UDT inspection required No

Condition: used, WEISS Weiss WK3-1000/70 climate testing chamber with temperature and humidity control – 990 liters – -70 to +180 °C Weiss WK3-1000/70 Air-cooled climate and temperature testing chamber with touch panel, 990 liters test chamber volume, and a temperature range of -70 to +180 °C For sale is a Weiss climate testing chamber, type WK3-1000/70, with temperature and humidity control. The unit is suitable for temperature and climate testing of components, assemblies, and industrial products. The integrated touch panel allows for setting and monitoring temperature, humidity, and test programs. Technical data: Manufacturer: Weiss Type: WK3-1000/70 Product type: Climate and temperature testing chamber Serial number: 59226115080010 Test chamber volume: approx. 990 liters Cooling: Air-cooled Operation: Touch panel Weight: approx. 955 kg Test chamber dimensions: Height: 950 mm Width: 1,100 mm Depth: 950 mm External dimensions: Height: approx. 2,000 mm Width: 1,415 mm Depth: 2,105 mm Data for temperature testing: Temperature range: -70 to +180 °C Heating rate: approx. 4.0 K/min Cooling rate: approx. 2.5 K/min Data for climate testing: Temperature range: +10 to +95 °C Humidity range: 10 to 98 % relative humidity Electrical data: Rated voltage: 3/N/PE AC 400 V ± 10 % Mains frequency: 50 Hz Rated current: 29 A Rated power: 13.8 kW Refrigerant: R404A: 4.6 kg R23: 1.2 kg Equipment: Touch panel for operation and program control Test chamber made of stainless steel Viewing window with lighting Air circulation system with fans Insert shelf Side openings: approx. 50 mm and 130 mm Communication interfaces Testing: The climate testing chamber has been tested. Heating, cooling, and humidity functions have been checked. Scope of delivery: 1 × Weiss WK3-1000/70 climate testing chamber with integrated equipment and insert shelf Scope of delivery as shown in the pictures. Condition: Used The unit has been tested. Condition and scope of delivery, see pictures. Tools, machines, and other items not explicitly mentioned are not part of the sale. Bdsdpj Aghkujfx Agksi Subject to changes, errors, and prior sale. We will gladly answer any further questions by telephone.

Year of construction: 2016, condition: good (used), functionality: fully functional, machine/vehicle number: 45129, FISA Ultrasonic Mold Cleaning System 3 VST 1200/P-INSON+Z1, Year of Construction 2016 Manufacturer: FISA Ultraschall GmbH / FISA Manufacturing Srl Type: Special 3 VST 1200/P-INSON+Z1 Year of Construction: 2016 Serial Number: 45129 Internal dimensions of the tanks: approx. 1,600 × 600 × 1,250 mm Maximum mold weight: 2,200 kg Description Offered is an industrial FISA ultrasonic cleaning system for cleaning and maintaining large injection molds, die-casting molds, and other molds, as well as heavy components. The system consists of three stations arranged one behind the other for ultrasonic cleaning, cold rinsing, drying, and preservation. The design is intended for workpieces or molds with a weight of up to 2,200 kg. Bjdezx Eftopfx Agkedi The VST 1200 cleaning station is designed as a noise-insulated INSON version. It features a pneumatically operated hinged cover, automatic water supply, safety float switch, vapor extraction with fans, and an adjustable timer. The ultrasonic generation is provided by two FISA USM 28/R generators and four MAGNASONIC transducers FB 550 PLAN. A cold rinsing station VST 1200 and a drying and preservation station VST 1200/P with Option D are connected to the cleaning station. The preservation station also has a pneumatically operated hinged cover, a vapor extraction system, and a sight glass for liquid level control. Above the preservation tank, there is a drip and blow-off station with side doors, a splash guard, an extraction system, and a flexible hose for blowing out the cleaned molds. Scope of supply - Cleaning station VST 1200 - Cold rinsing station VST 1200 - Drying and preservation station VST 1200/P - Two ultrasonic generators USM 28/R - Four MAGNASONIC transducers FB 550 PLAN - Pneumatically operated hinged covers - Vapor extraction system including fans - Drip and blow-off station - Stainless steel drip tray under the entire system - Two special mold support bars for a total load of 2.2 tons - Immersion rack VST 350 INOX with two inserts - Optical alarm indicator - Remaining runtime display - Weekly timer - Walkway with stairs and safety railing - Control cabinet and operating unit - Existing technical documentation Technical data - Usable internal dimensions: approx. 1,600 × 600 × 1,250 mm - Maximum workpiece load: 2,200 kg - Number of process stations: three - Sound power level according to the measurement report: 78 dB(A) - Design: Stainless steel - CE declaration of conformity available - Initial acceptance and instruction in 2016 documented - Drip tray: approx. 6,500 × 1,800 mm - Installation area including walkway and operating area according to drawing Condition Used industrial system. The system is shown fully assembled and connected in the pictures. A successful handover and instruction were documented in 2016. The current operating condition, the tightness of the tanks, the performance of the ultrasonic generators, and the function of the heating, pumps, pneumatics, extraction system, and control system should be checked again before sale or during an inspection. Inspection and functional testing possible by arrangement. Sale in the existing condition and scope of supply according to the illustrations and documentation. Dismantling, loading, and transport must be coordinated in advance due to the size and weight.

Condition: used, Year of construction: 2015, SANDYA 900 - WIDE-BELT CALIBRATING AND FINE-GRINDING MACHINE S900 RRT 135 KEY FEATURES 2,620 MM LONG GRINDING BELTS FOR OPTIMAL SURFACE QUALITY AND PRODUCTIVITY PHOTO CELLS WITH SYSTEM WITH BACKGROUND SUPPRESSION: THE CORRECT CENTERING OF THE GRINDING BELT IS ALWAYS GUARANTEED FLOATING PRESSURE ROLLERS: ACCURATE AND CORRECT SUPPORT OF THE WORKPIECES UNDER ALL WORKING CONDITIONS TECHNICAL DATA Working width mm 1,350 Min./max. working height mm 4-170 Grinding belt width mm 1,370 Grinding belt length mm 2,620 Motor power 1st unit kW (HP) 11 (15) Motor power 2nd/3rd unit kW (HP) 11 (15) Gear motor kW (HP) 0.6/1.3 (1.8/1.7) Feed speed m/min 4.5/9 GENERAL FEATURES: Machine frame and work table* Steel structure with electrical control cabinet on the front of the machine * Insertion of the grinding belts from the left side of the machine * motorized table height adjustment * Main motors integrated into the machine frame Electrical equipment* Electromechanical control panel on the left front side of the machine * automatic star-delta starter for the main motor * motor protection switches for the motors * motors in insulation class IP 54 Safety and protective devices* automatic brake for immediate stopping of the units * emergency stop switch at the workpiece infeed * emergency stop switch at the workpiece infeed and outfeed * lockable main switch * automatic emergency shutdown of the machine in case of: - grinding belt breakage - grinding belt not tensioned - protection against lateral deflection of the grinding belt - lack of compressed air - overload of the main motors Note: the standard version with 400 volts 50 Hz requires a three-phase power supply + neutral conductor + earth conductor. If the 400-volt power supply is without a neutral conductor, a single-phase transformer must be ordered in addition from the price list. The same transformer must also be ordered for a machine with a voltage higher than 400 volts, regardless of whether a neutral conductor is available or not. Machine version with 220 or 230 volts (50 or 60 Hz) is available at an additional cost (see price list). BASIC MACHINE STANDARD EQUIPMENT - R175/85 rubber-coated calibrating roller, diameter 175 mm, 85 Shore - 1st position - R220/65 rubber-coated calibrating and grinding roller, diameter 220 mm, 65 Shore - 2nd position - Hard grinding shoe with manual adjustment of the working height - Replaceable graphite cloth - Motor power 1st unit 11 kW (15 HP) - Motor power 2nd and 3rd unit 11 kW (15 HP) - Electronic ammeter for the main motor to display the current consumption - Electronic display of the working height - Electronically controlled grinding belt oscillation - Rubber pressure rollers - Recoil protection at the infeed before the first unit - Rubber feed belt 60 SH - Roller table with two rollers at the infeed and outfeed of the work table - Belt feed with two speeds 4.5 / 9 m/min with gear motor - Automatic belt centering European safety regulations (CE marking) 1 piece SANDYA 900 RRT 135 - Calibrating and fine-grinding machine 1 piece First and second "R" unit with roller and third "T" unit with grinding shoe Voltage 400 EU 1 piece Frequency 50 Hz 1 piece "C plus" version for RRT 1 piece with: - pneumatic switching on and off of the roller – 1st unit "R" - pneumatic switching on and off of the roller – 2nd unit "R" - "MESAR 46" electronic oscillating grinding shoe - electronic adjustment of the working height - Selection of belt running direction 2nd grinding belt 1 Bedpfx Agj Aflwyeksdi

Condition: used, Year of construction: 2018, CNC-CONTROLLED MACHINING CENTER AUTHOR M 200 AUTHOR M200 3710x1620 Z250 - CNC-controlled machining center 1 Technical data Work area I.M.S. I.U. Work area X-axis 3710 mm * 146" * Work area Y-axis 1620 mm * 63¾" * Workpiece passage Y 1900 mm 74¾" Workpiece passage Z 250 mm 9¾ Workpiece length for pendulum machining 1700 + 1700 mm 67" + 67" Travel speed of the X-Y axes PRO-SPACE 56 m/min 184 ft/min Travel speed of the X-Y axes PRO-SPEED 78 m/min 256 ft/min * Distance covered by all tools in the X and Y direction; see the corresponding layout for further details. With a 5-axis motor, the dimension in Y increases to 1680mm (66"), for motor JQX or 1720mm (67½") for motor KS/KT max. Width of the loadable plate for horizontal drilling, electric spindle only oriented vertically, no central reference stops Installation data I.M.S. I.U. Installed power 23 - 28.5 KVA Electrical standard specifications 400 Voltage 50 Hz 3 phases Air consumption 450 Nl/min Compressed air consumption 4500 m³/h 2650 CFM Extraction air velocity 30 m/sec Extraction nozzle diameter 250 mm 9.8 Inches Noise level VSA * LAV * Drilling 72.2 74.6 Milling 74.3 80.7 Reference standard EN ISO 11202:1995* VSA = unloaded and without extraction * LAV = in operation with extraction Structure of the base body: The CNC machining center can be equipped flexibly with different milling units as well as multi-spindle drilling heads and many other units, up to dowel drilling units. In order to meet all requirements in the field of wood and plastic processing, as well as the demands of the users, each machine can be equipped with 3, 4 or 5 machining axes. The selection of drilling units extends to up to 34 drilling spindles with an integrated groove saw for the back panel groove or rabbet machining. The possibility of using this high-quality CNC machining center both as a cantilever table machine and with an aluminum grid table underscores the flexible range of applications and the performance of the M100 and M200 series. Powerful drilling heads, with individually selectable drilling spindles, max. RPM 8,000, and implemented in . technology, "the most robust drilling spindles on the market", with more than 1,000 maintenance-free application hours (lubrication interval of the drilling spindles). The possibility of being able to replace the drilling spindles within a very short time, "even without a technician", through the technology, without disassembling the drilling gear, sets a benchmark in the industry and is already standard on your machining center. Imagine your CNC machine performing hinge drilling in just one drilling operation (option), instead of the usual 3. An option that underscores our claim to offer you robust and high-performance units on our machines. Ideally and flexibly equipped for a wide variety of requirements. Whether manual or automatic, the FLEX cantilever work table allows vacuum cups and mechanical clamping elements, such as pneumatic clamps for window or curtain wall constructions (option), to be quickly, safely and cost-effectively adjusted to any material and clamping requirements, making your day-to-day work easier. Differently sized vacuum cups and clamping elements, which were developed in close cooperation with customers and users, are available as an option. Bdodpfx Aszvhkyjgkoi

Condition: new, 10x25m storage platform, load: 500kg/sqm lower edge: 3.0m, approx. 250sqm system platform Data : - Length : approx. 10m - Width : approx. 25m - Lower edge of platform : approx. 3.0 m - Top edge of stage : approx. 3.38 m - Total area : approx. 250 sqm - Load : 500 kg / sqm - Covering : 38 mm chipboard P6, top natural, bottom white. - Support grid : 5.0m x 4.15m - NO CROSSES, bracing with dome brace. - New ex works plus freight depending on zip code. Scope of delivery : - 020 x C profile 4150 mm , sendzimir galvanized . - 004 x C profile 4250 mm , sendzimir galvanized . - 066 x S profile 4800 mm , sendzimir galvanized . - 021 x Support 3000 mm , RAL 7016 . - 004 x Strut brace 3049 mm , RAL7016 . - 0116 x Clamping plate 2400 x 1000 x 38 mm natural/white P6 . - 021 x Lining plates for supports . - 021 x Set of dowels for supports . Bjdps Ahn Ansfx Agksdi OUR PLANNING DEPARTMENT WILL BE HAPPY TO PROVIDE YOU WITH A NON-BINDING OFFER TAILORED TO YOUR REQUIREMENTS. Price : 26.487 € net plus statutory VAT. You will receive an invoice with VAT shown. Optional on request : - collision protection - railing - Transfer station - Stairs - ground anchor - Steel construction can be coated in any RAL color. (Standard RAL7016) Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Year of construction: 1987, condition: good (used), With a blister! Product: RUEZ Type: SFWW2 / 306DAU Year of production: 1987 Metal chain width: 200 mm Distance guide lanes: approx. 300 mm Chip outlet length 700/1300 mm Insertion length: approx. 1000 mm Insertion height 260 mm Total length: 3000 mm Bdodsgxqfcjpfx Agksi Transport height - ejection height: 800 mm Belt speed 26 mm / sec. = 1.6 m / min Engine power: 0.25 kW Mains connection was 400, 50 Hz Enclosure size: H x W x D; 1900 x 900 x 1300 mm Weight 300 kg Set of 2 pcs.

Year of construction: 2002, condition: excellent (used), Hinge width 300 mm Bdodpemdqx Hofx Agkoi Slide-in width - / height 390 x 100 mm Insertion length 4615 mm Height from floor to lower edge of chip ejector 700 mm Hinge drive 0.37 kW Transport dimensions L x W x H approx. 5965 x 750 x 1010 mm (height without feet!) Weight approx. 500 kg Foot height adjustable yes This hinged chip conveyor manufacturer TEKNICALDE model TC 1 ½ 300 was used on a CNC bed milling machine MTE Kompakt. Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Year of construction: 2008, condition: excellent (used), Electric heating rod Shock- and impact-resistant heating insert system with heating conductors embedded in silicone for airtight sealing. No wear, no corrosion, reliable operation even in continuous operation and under shocks and vibrations. Temperature setting via integrated controller with insulated control knob. Permanently connected industrial cable, no vulnerable plug connections. High-strength special aluminum profile for high load capacity and flat pressure surfaces on all sides. Standard gold-anodized finish, scratch- and abrasion-resistant, easy to clean. Size: Type: EST 21 Length: 2100 mm Connection value: 1100 watts, 230 volts Temperature: 0 / 40 / 70 / 100 / 170 / 200 degrees Location: in stock at warehouse 54634 Bitburg - immediately available - Bdjdpfx Aslcd Szjgkji