Used Dowel Insertion for sale (2,286)

Year of construction: 2025, condition: used, Ribbon inserter Müller Martini Ribbon A 751 Age 2025 - for inline or offline operation - State-of-the-art servo technology replaces mechanica! cams and drivetrains - fully automated with amrys - operation via 1 HMI operating panel - runnig left to right - can be integrated in the Diamant Commander control console - operation trom the right Equipment: - lnfeed element for the mounting of a timed belt trom left or right - Vertical infeed channel - Timing of books with light barrier - Splitting of the book block in two positions via air jet - Ribbon inserting station standard for 1 or 2 ribbons - Ribbon positioning (pull-down) device for tight insertion of the ribbon into the spine - Vertical delivery channel with delivery to the left, horizontal delivery belt - Surcharge for belt with rolling knife edge for gentle transfer of sensitive products - Ribbon separation mechanism with heated cutter - Third ribbon - Conveyor system "Ribbon Bypass" General technica! data tor Ribbon: A751.8611 Max. mech. speed 3900 Cycles/h Size range: Book Block Cedjzgd Enjpfx Aptsrg -min. WxHxT 70* x 11 0* x 5 mm -max. WxHxT 300 x 390* x 80 mm Ribbon -min. Wxl 3 x 200 mm -max. Wxl 8 x 530 mm * Size limitations see technica! data Connection values: - Electr. requirements: 2 kW - Compressed air requirements: 18 Nm3/h at 6 bar - Air requirements: clean and dry (pressure dew point 10°C be low ambient temperature) Net production output depends on paper, material, size, operator and climate conditions, etc.

Condition: excellent (used), Here, we offer a TOX pressing machine, specifically the TOX-C bracket press. TOX Pressotechnik pressing machine, TOX-C bracket press. Pneumohydraulic manual workstation with process monitoring for pressing in functional elements. Technical data: Press type: EMB 030.068.Α.001 Drive: KWE3O.0O.17O.10H Pneumatic connection: G3/4'' Compressed air treatment: Filtered and dried compressed air, max. particle size 40 µm Air pressure during working process: Pmin. = 3.0 bar, Pmax. = 6.0 bar Pressing force: 170 kN Total stroke / return stroke: 170 mm / 10 mm Control: STE 326-366-3/4"-90-230V/AC special, complete Electrical connection: 90-230V/AC Ambient temperature during operation: Tmin. = 10°C, Tmax. = 60°C TOX pressing monitoring: EPW 500FP, force/travel measurement Holding device: ZHE for TOX press Dimensions: Width 1917.5 mm, Height 2506 mm, Depth 1917.5 mm Protective grid system: Leuze B20/B21 light curtain Pressing tool: See (pictures 15 to 18) Pressing sleeve (picture 17): 24.5 ∅ mm Application area, use: Pressing Weight: 2200 kg Type: EMB 030.068.A.001 Condition: used Credpfx Aezd Rhkeptog Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: like new (used), STARK Profiling Tool Set 119 pieces, new, some in original packaging Article number: JA_G250801 Description / Parts List 82451 8x 94011 6x 600130 10x 62061 9x 37911 6x 108611 3x 108511 3x 108581 6x 98671 4x 108601 6x 53421 2x 600604 1x 600601 2x 600607 16x 600608 4x 600706 7x 602029 4x 602062 2x 602063 3x 8602034 2x 8602035 2x 8602036 2x 8602037 2x 8602038 2x 8602039 2x 6002.06 5 Note: Used item: • Prices are quoted as pick-up prices (unless otherwise specified!) from our location in Ottendorf-Okrilla/Germany – free loading! (unless otherwise specified) • Subject to prior sale! • You will receive an invoice with VAT (value-added tax) shown. • All items are sold as seen, without any warranty claims. The buyer is free to inspect the items at our location. Crjdpfjw Tlrksx Aptjg • Our general terms and conditions apply. • Special agreements are only possible in writing. • Items that may be visible in the background of the image are not included in the scope of delivery. • Saw blades are only for illustrative purposes and are not included in the scope of delivery. Shipping options: • We will gladly provide you with a transport quote. • Pick-up from our location in Ottendorf-Okrilla is possible after consultation and is free of charge. (Assembly and instruction of the machine for demonstration purposes is optional and can be arranged!) • Delivery is partially disassembled. • Our trained service personnel can optionally assemble the machine at your location and provide you with a brief instruction. Travel, transport and service costs will be charged extra.

Condition: used, functionality: fully functional, The device is complete and operational – it was previously used in conjunction with a Pitney Bowes XPV inserting machine. Credpfx Apsy Izcpstog

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 508678, drilling depth: 80 mm, total width: 820 mm, total length: 1,350 mm, total height: 1,400 mm, overall weight: 450 kg, number of spindles: 21, power: 2.2 kW (2.99 HP), Universal dowel hole and line boring machine, dowel hole drilling machine, dowel drilling machine Crodewuuxkepfx Apteg Manufacturer: Scheer Year of manufacture: 1989 Type: DB-5 Weight approx.: 450 kg Machine number: 508678 Dimensions: 1350 mm x 820 mm x H 1400 mm Drilling beam length: 640 mm Spindle distance min. 32 mm, max. 640 mm 21 spindles Drilling depth: 80 mm Drilling beam pneumatically swivelling Motor power: 2.2 kW

Condition: good (used), Year of construction: 2016, Müller Document Logistics System, envelope inserting machine – used: Price ex works: €39,500.00 (net)! Manufacturer: Müller Type: 2016 Year of manufacture: 2016 6984F: Outfeed tray incl. STOP 6978D: Envelope turner 8006C: Envelope inserting machine C5 / DIN long (approx. 6,000 cycles/hour) 6628C/4: Multi-channel system 6825C: Folding machine (top and bottom) incl. STOP incl. stop function in/out 6822C-SCHALLSCH: Soundproofing for folding machine 6822C-SCH-36583: Soundproofing for 6825C 6786D-L: Collection tray 6730C-L-STOPP: Transfer station 6692D: Sequencer 6784C-L: Transfer station 6600D-12K: Cutting machine incl. power supply 6600BH: Brush holder 6875C: Center knife A4, from stack, 2-up, pinfeed, face up / foot forward, always 2 sheets, Sequence Z-A New price: over €100,000.00 Condition: good Available: immediately Location: Lohne Codpfx Ajzcxxpoptjrg

Condition: like new (used), Rolling Center Punch with Interchangeable Inserts Codpjwc Nyxjfx Aptsrg Bruckner SE 5487 MK 4 Stock Number (28605) 1 Center Punch Type 487 B 1 Center Punch Type 487 C 1 Inner Taper Type 487 D As New Condition

Year of construction: 2016, condition: excellent (used), Indexable insert milling cutter – Face milling cutter Manufacturer: Mitsubishi Type: AHX 640 W 160 C 22 R Multicorner Credpfx Aefc Tq Eepteg Face milling cutter for high feed rates For 22 heptagonal inserts Cutter diameter: 160 mm

Condition: good (used), functionality: fully functional, 3 inserts for Multifix, size C, Codpszkypqefx Aptjrg

Condition: new, New Siemens SIMODRIVE 611 digital control module. The device is unused. The original packaging has been opened. Manufacturer: Siemens Codpjzcgyhjfx Aptorg Product series: SIMODRIVE 611 Type: 6SN1118-0DK21-0AA0 Version: A Device type: Digital control module Design: High Performance Number of axes: 2 axes Weight: 0.78 kg

Condition: good (used), Year of construction: 1982, functionality: fully functional, Power 380V 3.3A Motor power 1.1kW 2800 rpm Automatic pneumatic control with control panel Drill head with 23 spindles, pitch 32 mm Drill hole depth adjustable drill shaft 10 mm position adjustment 5-60 mm Crjdpfx Apsq Auwtjtjg Clamping height 80 mm Passage width 800 mm Dimensions: 1200 x 900 mm Weight approx. 400 kg 1x setting gauge row bore 1x setting gauge side stop 1x stop ruler 1500 mm 1x fence 2000 mm

Condition: reconditioned (used), Year of construction: 1990, Motors 2x1.85A 50Hz 380V 2800 rpm Air operating pressure 6 bar Csdpfev Nptmex Apterg 30 spindles D=10 mm mount Combination foot switch Emergency stop switch Main switch Manual height adjustment Manual side adjustment

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 690924, Connected power: 380V, 1.84kW Speed: 2840 rpm Number of spindles: 21 pieces, pitch 32 mm Spindle spacing: 640 mm Spindle rotation direction: 11x right, 10x left, M10 thread 2x safety chucks pneumatic foot valve Table size: 880 x 400 mm 1x side fence with 2 folding stops 1x base fence 1x miter fence Unfortunately, we cannot respond to inquiries that do not contain complete contact information. Crodpfjh U Damox Apteg

Year of construction: 2008, condition: used, functionality: fully functional, Haeger insert molding machine 824WT-3H, manufactured in 2008, with a feeder hopper. In the summer of 2025, the upper and lower tool sets were replaced with a retrofit kit TIS-2 to TIS3, performed by the manufacturer. In July 2026, the touch screen PC was completely overhauled and equipped with a new flash card. The machine is in operation and can be inspected. Sale is without warranty or return, payment in advance required. Machine is available upon agreement in 2026. Codpfx Apeyq Nxietsrg

Condition: like new (used), Year of construction: 2008, functionality: fully functional, • BB300-10K envelope module "right" with BSC 2.0 user interface • Feeder system with 6 feeder positions "right" • 4x rotary feeders AT25 (at positions 1–4) • 1x hybrid feeder HF3 (at position 6) • 1x free feeder position with safety guard • long chain guide • 15” panel • Keiper stacking conveyor, 1.5m Crodszh Er Eepfx Aptsg • Preparation for reading at a maximum of 6 positions • Vacuum sealing section with integrated discharge station • 1x turning conveyor • 1x envelope autoloader • D/V printing/vacuum pump with noise protection - With Müller channel – consisting of: • Module 6798 Autoloader • Module 6686 single-sheet feeder, 26,000 sheets/hour • Module 6896/6815 transfer unit with stop function • Module 6826/6822 second pocket folding unit, 2x top with stop function • Module 6786 collection pocket, standard up to 12” • Module 6730 transport module • Module 6730 transport module • Module 6955 Black Box • Preparation for camera reading

Condition: used, Disc sander with spindle sander KURT EHEMANN type V K8 Combined drum sanding machine - double sanding machine, cylindrical rod sanding machine Machine no. No. 6812420 Year of construction 1968 Sanding disc diameter 800 mm Table support on sanding disc 900 x 300 mm Sanding disc speed 940 rpm Table height of sanding disc 900 mm Spindle sanding unit with sanding sleeve Ø 50 mm Table support for spindle sanding unit Ø 500 mm Table height spindle sanding unit 1000 mm Spindle sanding unit speed 1410 / 2420 rpm pole-changing Motor power sanding disc 3 kW Motor power spindle grinding unit 1.1 / 1.6 kW Mains connection 380 Volt, 50 Hz - inclinable sanding table, 30° downwards/ 15° upwards - the entire table can be swiveled away from the plate for changing sandpaper - Spindle sanding unit with clockwise/anticlockwise rotation (1410 rpm for clockwise rotation, 2420 rpm for anticlockwise rotation) - Spindle sanding unit with oscillating stroke movement 10 mm Csderk U Edopfx Aptsrg - Height-adjustable grinding spindle in the table - Spindle sanding unit with inclinable rotary table, inclinable by approx. 30° - Rotary table with removable segment inserts Ø 54 / 84 / 308 mm - Pipe connection for extraction system, rectangular 100 x 170 mm Space requirement L x W x H 1500 x 1100 x 1400 mm Weight 550 kg Very good condition

Condition: used, Year of construction: 2002, Used Cardboard Divider Inserters TMG 2002 TMG brand divider inserter Suitable for inserting the hive on cartons with bottles Crodevgummepfx Aptog It inserts the hive into two cartons The whole frame is made of painted iron Safety features Equipped for cartons of 6 and 12 Production about 2,000 cartons per hour Year 2002

Condition: new, Year of construction: 2026, Pitch 32 mm Working width 896 mm Boring depth max. 65 mm Motor output 2x1,5 kW Overall size 1122x1040x1250 mm Weight 380 kg Cjdpoy Ehz Hefx Aptsrg Number of boring spindles 29 St.

Condition: new, Year of construction: 2026, Pitch 32 mm Csdpoy Ehyvsfx Apterg Working width 1088 mm Boring depth max. 85 mm Motor output 2x1,5 kW Overall size 1320x1040x1250 mm

Condition: used, Single-column eccentric press WEINGARTEN type E 40 Machine. No. 643/62 Year of construction 1963 Pressure capacity 40 ton. throat depth 250 mm Table opening 150 x 80 and Ø 200 mm Table surface 560 x 460 mm ram surface 250 x 200 mm Credpfxotx E Rqe Apteg Plunger stroke adjustable 8-88 mm Plunger adjustment 63 mm Installation height 320 mm Clamping pin bore Ø 40 mm Stroke rate 100/130 strokes / min. Motor power 2.2 / 3 kW Mains connection 400 Volt, 50 Hz Table height above floor 840 mm - Clutch/brake combination with WEINGARTEN friction threaded clutch with TDC run-through protection - Electric lift release via two-hand control - Overload protection by breaker plate - Manual central grease lubrication - Front crankshaft support bearing - Control cabinet adjacent - UVV for manual insertion work Space requirement L x W x H 1800 x 1500 x 2200 mm Weight 3.1 tons

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 0-253-05-4317, workpiece height (max.): 60 mm, workpiece length (max.): 1,250 mm, workpiece width (max.): 800 mm, controller model: Powercontrol PC85T mit Woodwop software, TECHNICAL DETAILS Process: horizontal drilling – injecting adhesive – driving in dowels Workpiece length min/max: 20 mm / 1,250 mm Workpiece width min/max: 50 mm / 800 mm Workpiece thickness min/max: 10 mm / 60 mm MACHINE DETAILS Control system: Powercontrol PC85T with Woodwop software Dowels: 8 mm x 30 mm, 8 mm x 35 mm Codpszhm Sgofx Aptorg Voltage: 400 V Frequency: 50 Hz Phases: 3-phase EQUIPMENT Drilling unit: 1 drilling and dowel insertion unit, freely programmable Z-axis manually adjustable Drilling depth manually adjustable Center stop pneumatically lowerable 4 vertical clamping cylinders Double diaphragm pump 1:1

Condition: ready for operation (used), Year of construction: 2019, We have here a Pitney Bowes F700 also known as Relay 7000 envelope inserting system available. This machine is year 2019 and only has done 1.763.359 envelopes. Works without any problem after we have tested it fully. Crjdpfoy R A D Tjx Aptjg Configuration: 2 main feeders - high capacity feeders 4 docoument feeders - with the extra feeder trays you can switch between documents and folded inserts Folding station Envelope inserting module and station.

Year of construction: 2026, operating hours: 25 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: P1S10_34, Electric pressing machine P1S-10 of the PRESSONE series by CoastOne from Finland with spindle drive. PressOne P1S-10 100kN pressing force 120mm/s feed speed 200mm/s opening speed Tool carousel for 4 lower tools Tool case with 22 pressing tools Side holder with color boxes TC12 touchscreen control Crjdpfjy A Ntfox Aptog 36 month guarantee

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: P1S5_21, PressOne P1S-5 is a press-in machine from Finland, which is driven by a ball screw with a servo motor. That gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no hassle when changing the oil and no filtration problems. Pure power, accuracy and speed! Crjdoy A Nq Dopfx Aptjg Technical data: P1S-5 Main press technology: ball screw with AC servo drive Maximum pressing force: 50 kN Repeatability of force setting: ± 1% Maximum opening / approach speed: 120 mm / s Press speed: max 10 mm / s Throat: 470 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 touchscreen 12 " Tool connection: Type PressOne Universal, 4-fold lower swivel base * The maximum approach speed requires the "Fast approach speed" option. Control features of the P1S TC12: - Programmable press force - Programmable lift opening - Programmable pressing speed - Programmable speed change point after starting before pressing - 2-stage cycle (start and press) - Possibility to set the press stroke length in millimeters - Save programs for memory control by name or number - Piece counter, cycle stop after the last press - Material table for material / pressing force - Tool library - FTP server connection

Year of construction: 2026, operating hours: 25 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: P1S10_32, Electric pressing machine P1S-10 of the PRESSONE series by CoastOne from Finland with spindle drive. PressOne P1S-10 100kN pressing force 120mm/s feed speed Credey A Nqqepfx Aptog 200mm/s opening speed Tool carousel for 4 lower tools Tool case with 22 pressing tools Laser pointer Work light Side holder with color boxes TC12 touchscreen control 36 month guarantee