Used Drag Finishing Machine for sale (65,091)

Condition: used, Year of construction: 2021, operating hours: 2,725 h, 2021 Rösler Model RHBD 13/18T Overhead Conveyor Shot Blasting System (only 2725 hours) Duedpfey Am Duox Aa Nst 3 Part System. Modern, High-Performance Overhead Conveyor Shot Blasting System Designed For Continuous Surface Treatment Of Medium To Heavy Components. Suitable For Cleaning, Descaling And Surface Preparation Prior To Coating. The System Was Used For Blasting Magnesium Die-Cast Components. With The Same Blasting Media, The System Can Also Be Used For Aluminium Die-Casting Or Aluminium Casting, Brass Casting, E.G, Fittings. The Blast Cabinet Has Four Blast Turbines With Automatic Abrasive Recirculation For Continuous Use Of The Blasting Media. The System Has A Wet Separator. The Overhead Conveyor System Has 18 Rotating Stations To Which 18 Workpiece Carriers Can Be Attached. There Are 14 Stainless Steel Workpiece Carriers On Which Components Can Be Hung. Operating Hours: 2,725. Rated Power: 135 Kw/400v. 6 Blast Wheel Turbine. Rated Speed Per Turbine: 2,500 Rpm. Rated Blast Media Quantity Per Turbine 45Kg. With Circulating Overhead Conveyor, Including Workpiece Carrier, With Wet Filter System. Control System Siemens Simatic HMI. S/No.96410 (2021) Overhead Conveyor Steel System Model RHBD. Shot Turbines Gamma. Gate Width 1,300mm, Gate Height 1,800mm. Pneumatic Gate Operation, 4 Gate Leaves. Safety Monitoring, Swivel Field Gate. Lifting/Lowering Device For Hooks. Wear Protection Plates 10mm Against Turbines And Ceiling. Wall Thickness Of Blasting Chamber 8mm. Filter System 4,000 M³/H. Wet Separator Type RF 800 NS, No. 96411. Conveyor System Freely Configurable. Maximum Hook Load Per Suspension 1,000kg. Workpiece Carriers In The Blasting Cabin Automatically Rotating, Freely Configurable. Recommended Diameter Of Hanging Workpiece Carriers 1,100mm. Recommended Height Of Hanging Workpiece Carriers 1,600mm. 14 Goods Carriers With A Diameter Of 1,000mm And A Height Of 1,450mm Available. Abrasive Return Via Linear Conveyor System And Elevator Conveyor Into The Feed Hopper. Abrasive Supply To The Blast Turbines Through Screw Distributors With Adjustable Abrasive Quantity. Occupational Safety And Explosion Protection Report For Magnesium Processing Available. Dimensions Of The Blast Cabinet Approximately: Width 2,800mm, Length Approximately 10,500mm, Height Approximately 3,500mm. Please Note The Machine Was Dismantled In August 2025.

Condition: ready for operation (used), WALTHER TROWAL Type CA 650 incl. centrifuge -Drum diameter: 1600 mm -Coating in good condition -Speed: 1450 rpm -Timer -Centrifuge Dsdpfjyz Sitsx Aa Nout -Soundproof cover -Working platform -Power: 11 kW Subject to errors and omissions.

Year of construction: 2013, condition: used, Technical details: swing diameter: 80 mm workpiece length: 450 mm weight of the machine ca.: 3500 kg Djdpfxjixl Ahs Aa Neut

Condition: used, Vibratory parts feeder, vibratory finishing machine, circular vibratory bowl, tumbling drum, used machine Manufacturer: Rösler Oberflächentechnik Overall dimensions: Width: 1310 mm Depth: 1185 mm Height: 1440 mm Weight: 690 kg Trough size : Ø 1090, depth to discharge height : 240 mm Electrical data: 400 V Applications: deburring, grinding, polishing, cleaning Dedpfx Aasyh En Es Nout The Rösler R185 vibratory finishing machine is ideally suited for deburring, edge rounding, cleaning, and surface finishing of metal and other components. Reliable, industrial-grade German machine designed for continuous operation.

Condition: used, Year of construction: 2000, Technical details: workpiece diameter: 26 mm swing diameter: - mm workpiece length: 66 mm total power requirement: 12 kW weight of the machine ca.: 4 t dimensions of the machine ca.: 3,14 x 1,69 x 2,2 m The machine has so far processed the parts in a stream, i.e. without interruption. Piston rods are usually machined with a clearance, requiring the finishing stone to be placed only when the part passes under the stone. 1. Feed Roller Djdsw Nxkfopfx Aa Neut 2. Stone holder, 10 pieces, 50 mm new guides can be made between approx. 15 to 40 mm The Roller of Nagel: Dia: approximately 120 mm L: app. 880 mm *

Condition: reconditioned (used), functionality: fully functional, Löser RP+S374-1, centerless tube grinding machine, cylindrical grinding machine, wet grinding, wet machining Belt grinding station: one Grinding belt: 150 x 2500 mm Contact wheel: 150 x 400 mm Belt tension: pneumatic Wheel drive: 5.5 kW Dusdpfx Aaoyxdglo Nst Part feed: 0 - 8 m/min Part diameter: 10 - 100 mm Part length: 60 - .....mm Working direction: from right to left

Condition: used, Rotary vibratory finishing machine WALTHER TROWAL type CLS-980 SA Com. No. 15.207 Year of construction 1972 Trough diameter 1850 mm Total outer height of trough approx. 1150 mm Working hopper / gross volume max. 980 liters Useful volume approx. 490 liters Largest possible workpiece diameter approx. 300 mm (measured diagonally) Screen area 3400 cm2 Infinitely variable speed 1000 to 1700 rpm Motor power 22 kW Mains connection 400 Volt, 50 Hz - Switch-on time manually and via timer - Infinitely variable motor speed via DANFOSS drive controller type VLT 3032 (frequency converter) - Manually adjustable eccentric unbalance weights - Container with rubber lining - sound-insulated lid with pneumatic lid opening - Manual separating flap - built-in sieve separator after the separating flap Duodpfedzqn Dex Aa Not - liquid inlet - Material outlet opening 470 x 300 mm - Control cabinet and drive controller for wall mounting - Bulkhead cover with perforated sieve - 1 box of pyramid grinding media Space requirement L x W x H 3000 x 3000 x 2550 mm Transport dimensions L x W x H 2300 x 3000 x 2550 mm dead weight 2500 kg good condition Functional description: Workpieces and grinding wheels are set in motion by the vibrations generated and circulated extremely gently. The constant relative movement between the workpieces and the grinding wheel causes deburring and surface finishing of the workpieces.

Condition: used, Year of construction: 2008, Spraying machine CEFLA FINISHING EASY 2000 DUO D Pictures are only sample - Producer Cefla Dusdpfx Aasqhquwe Njt - Type EASY-DUO - Year of construction 2008 - Working width 1300 mm - Operating side, left - Prize for overhauled machine - Actual condition, machine is not overhauled - Duo gun drive system - Dry filter system - Exhaust air 12.000 m³/h - Transport belttransport System - Feed speed adjustable 2 - 8 m/min - Belt cleaning system with roller - Lacquer reclaiming system with v-belt - Number of installed lacquer circles 2 Stk. - Number of installed spraying guns 4 Stk. - spray gun type Kremlin AVX - Airmix spraying system - Height adjustment for spraying guns - Number of lacquer pumps 1 Stk. - Producer lacquer pump Kremlin 16-120 - Supply air box - Ex-prevention - Suitably for solvent based lacquer - Suitably for water based lacquer - Used machine, good condition - Length ca. 6152 mm - Width 3.700 mm - Height 2.895 mm - Total connection power 18 KW - Location, on stock - Voltage fluctuation max. +/- 5 % _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in contact with us!

Condition: used, The RGM 3, a top-tier Tube End Finishing Machine from KNUTH, is designed for precision and efficiency in tube processing. Its rigid construction and small footprint make it an ideal choice for any workshop looking to optimize space without sacrificing performance. The machine features a jaw chuck at the front and a clamping chuck at the rear, allowing for versatile operations. Additionally, it comes equipped with a tube cutter and an inside deburrer, ensuring clean and accurate finishes on all types of tubing. With the inclusion of a mobile base, the RGM 3 offers easy maneuverability, enhancing its usability. Whether you need to perform intricate tube work or handle larger projects, this highly robust machine is built for the task. Don't miss out on the opportunity to enhance your tube and profile processing capabilities; order online today to bring the RGM 3 to your workshop. Duedpfx Asuxc Rhja Njt

Year of construction: 2008, condition: good (used), functionality: fully functional, machine/vehicle number: 10999, DESCRIPTION Double-sided grinding machine / grinding machine top/bottom Manufacturer Löwer Type DSM 3000 with workpiece return Bthgq0Ygu0 Working width: 290 mm Grinding thickness: 2-200 mm Djdsv Dfp Hepfx Aa Nsut Shortest workpiece length: approx. 320 mm Equipped with: 1x grinding unit from above, 7.5 kW 1x brushing unit from above, 0.37 kW 1x grinding unit from below, 7.5 kW 1x brushing unit from below, 0.37 kW Grinding belt dimensions: 300 x 1800 mm Electric height adjustment, 0.37 kW Adjustable feed, 6/11/16 m/min. Compressed air: 6-8 bar Dimensions approx. 2700 x 1100 x 1900 mm Weight approx. 1600 kg

Condition: used, The PRS 76 is a top-tier Tube End Finishing Machine designed specifically for efficient tube and profile processing. This advanced machine features a powerful 3 kW motor that allows it to grind various materials effortlessly. With its innovative rotating design, the PRS 76 enables you to grind at any angle between 30° and 90°, accommodating diameters from Ø 20 mm to Ø 76 mm. It comes equipped with two K36 grinding belts, measuring 100 x 2000 mm, ensuring you have everything needed for optimal performance. Ideal for both tubes and profiles, the PRS 76 stands out for its ease of use and versatility. Enhance your workshop's capabilities with this robust machine. You can request a quote today to learn more about the PRS 76 and discover how it fits into your tube end finishing requirements. Duedpfx Aasuxdb Us Njt

Year of construction: 2016, condition: good (used), Label finishing line PRUDENTE FU 300 Year of production: 2016 Material width max: 330 mm Unwinder with tension control Hot stamping unit Silkscreen unit with UV drying unit ( manufacturer UV RAY). Flat die cutting/ embossing unit Rewinder Dedpfeun Nyyex Aa Njut

Condition: used, The RGM 2 is a state-of-the-art Tube End Finishing Machine designed by KNUTH, renowned for its robust and precise engineering. With a rigid design and a small footprint, this machine is perfectly suited for shops that require efficiency without sacrificing performance. The RGM 2 features an impact chuck at the front and a clamping chuck at the rear, ensuring secure handling of various tube sizes. Additionally, it includes a tube cutter and an inside tube deburrer, which provide a complete solution for finishing operations. For mobility, the machine is equipped with a mobile base. When looking for a reliable Tube End Finishing Machine, the RGM 2 stands out with its advanced features. Don't hesitate to request a quote today to enhance your tube processing capabilities with this exceptional product from the renowned KNUTH brand. Djdpfx Ajp Atgboa Nsut

Condition: ready for operation (used), Vibratory finishing system, Slide Grinding Machine,Circular trough vibratory finishing machine, Used Machine Dujdpfx Aajxdfabs Njt Manufacturer: Gránit-Ex Kft Type: FM-10, 1500 x 1500 Year: 2020 Weight: 600 kg d: 550 mm, Circumference: 1670 mm D: 1350 mm, Circumference: 3650 mm Torus: 350 mm

Condition: new, Year of construction: 2026, Machine type: EVP 30 Manufacturer: ERBA Power kW: 0.95 Total volume: 30 liters Description: The EVP 30 vibratory finishing machine from ERBA is ideal for processing small workpieces or as an entry-level or pilot system. It features a flat work container base without a separation unit. Discharge or separation is carried out via the bottom discharge (manual or pneumatic). The motor speed can be continuously adjusted using a frequency converter (optional). The system can also be equipped with a fully automated PLC control system (optional). ERBA vibratory finishing systems are distinguished by their durability and longevity, which is also ensured by the heat-cast polyurethane lining of the work bowl. As an experienced partner, we provide expertise in all aspects of vibratory finishing. Together with you, we develop efficient solutions for optimal process results. All prices are net plus the currently applicable statutory VAT and shipping costs. The images may depict the machine with optional accessories, which are available at additional cost. If you are interested, we look forward to your inquiry. We are happy to provide you with independent and non-binding advice. The European Commission provides a platform for out-of-court online dispute resolution (OS platform). Dusdpfx Aoyq Ripsa Nst This offer serves solely as an online presentation of our goods. Contract negotiations take place by means of telecommunications (email, telephone, messaging portal). In the first step, we will provide you with a non-binding offer, which also includes our general terms and conditions with legal notice and information on the right of withdrawal, before a purchase/contract is concluded.

Condition: new, Year of construction: 2026, The ERBA EVP-RA 550 vibratory finishing machine features a flat-bottom working tank with separation capabilities, designed for processing medium to large parts. It is equipped with an easily exchangeable screening unit. Discharge and separation are performed via the integrated flap (manual/pneumatic operation). Upon request, reinforced suspension and a more powerful motor can be installed for higher loads. The motor speed can be continuously regulated using a frequency inverter (optional). Thanks to the lateral discharge, the EVP-RA 550 can be linked with other machines for integrated operation. The system can optionally be equipped with a fully automatic PLC control unit. ERBA vibratory finishing systems are known for their durability and reliability, supported by a hot-cast polyurethane lining in the working tank. Technical data: - Gross volume: 550 L - Working channel width: 390 mm - Unbalanced motor power: 4.0 kW - Speed: 1,400 rpm Dodpfx Aasyq Rh So Nout - Tank inner diameter: 1,400 mm As an experienced partner, we provide comprehensive expertise in vibratory finishing technology. Together with you, we develop efficient solutions to achieve optimal process results. Prices are net plus statutory VAT and shipping costs. Images may show the system with accessories, which are optionally available and subject to additional charges. If interested, we look forward to your inquiry. We are happy to provide you with non-binding advice. The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer serves solely as an online presentation of our products. Contract negotiations are concluded via telecommunication (email, telephone, messaging portal). In the first step, we will send you a non-binding offer, which also includes our general terms and conditions, legal notice, and information about your right of withdrawal, before any purchase/contract is concluded.

Condition: new, Year of construction: 2026, Machine type: EVP 550 Manufacturer: ERBA Dodpfoyq Rhxjx Aa Nout Power kW: 4.0 Total volume: 585 l Description: The ERBA EVP 550 vibratory finishing machine features a flat-bottomed process bowl without an integrated separation unit. Emptying and separation are done via a manual or pneumatic bottom discharge system. Upon request, the machine can be equipped with reinforced suspension and a heavy-duty motor for increased loads. The motor speed can be infinitely adjusted via frequency inverter (optional). An optional fully-automatic PLC control system can also be installed. ERBA vibratory finishing systems are renowned for their durability and longevity, largely due to the hot-cast polyurethane lining of the process bowl. As an experienced partner, we provide expertise in all aspects of vibratory finishing. Together, we develop efficient solutions to ensure optimal process results tailored to your requirements. All prices are net, plus the applicable VAT and freight charges. Accessories shown in the images may be optionally available and are subject to additional costs. If you are interested, we look forward to hearing from you. We are happy to provide you with non-binding advice. The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer is intended exclusively as an online presentation of our goods. Contract negotiations are conducted via telecommunications (e-mail, telephone, message portal). As a first step, we will send you a non-binding offer, which also includes our general terms and conditions, imprint, and information on the right of withdrawal, prior to any purchase or contractual agreement.

Condition: new, Year of construction: 2026, The ERBA Separation Conveyor YE-60 is designed for separating workpieces and grinding media. It can be used as a mobile standalone machine or in combination with other machines, such as the ERBA Turbo (centrifugal system). The separation bed can be quickly and easily replaced to suit various requirements. An optional frequency inverter can be installed, allowing stepless adjustment of the motor speed. The YE-60 can be equipped with many optional features to simplify the separation process, such as a magnetic separator for small parts, a wash nozzle, or a parts hopper. Technical Data: - Gross volume: 60 liters - Motor output: 0.3 kW - Weight: 140 kg - Screen area dimensions: 1,000 x 500 mm - Installation dimensions: 1185 x 540 x 575 mm (L x W x H) As an experienced partner, we provide you with expertise in all aspects of vibratory finishing. Together, we develop efficient solutions tailored to your optimal process results. Djdpfxoyq Rhrs Aa Nout All prices are net plus the currently applicable statutory VAT and shipping costs. The images may show the system including accessories that are optionally available and subject to additional charges. If you are interested, we look forward to hearing from you. We are happy to offer advice with no obligation. The European Commission provides a platform for out-of-court online dispute resolution (OS platform). This offer serves exclusively as an online presentation of our goods. Contract negotiations are conducted via telecommunication (e-mail, telephone, message portal). In the first step, we will send you a non-binding offer, together with information about our general terms and conditions with imprint and the right of withdrawal, before any purchase/contract is concluded.

Condition: new, Year of construction: 2026, The ERBA Turbo 60 is a centrifugal finishing machine for deburring, smoothing, and polishing small to medium-sized workpieces. The machine features a digital process timer, a digital speed display, and a dosing pump (wet version). The disc speed can be adjusted via a frequency inverter. The Turbo 60 is available in both wet and dry versions. It can be ideally linked with the ERBA YE-60 separation conveyor shown in the images. Technical data: - Gross volume: 60 liters - Drive power: 3.0 kW - Disc speed: 75 to 300 rpm - Optionally equipped with tilting motor, soundproof lid, or separation box As an experienced partner, we provide you with expertise in the field of vibratory finishing. Together, we develop efficient solutions for your optimal process results. All prices are net plus the applicable VAT and shipping costs. The pictures may show the system with accessories that are available optionally and subject to additional charges. If you are interested, we look forward to hearing from you. We are happy to provide you with advice without obligation. The European Commission provides a platform for online dispute resolution (ODR platform). This offer is solely intended as an online presentation of our goods. The contractual negotiation takes place via telecommunication (email, phone, messaging portal). In the first step, we will send you a non-binding offer, which includes information about our general terms and conditions, legal notice, and the right of withdrawal, before a purchase/contract is concluded. Djdpfx Aaeyq Rhle Nsut

Condition: new, Year of construction: 2026, The ERBA Vibratory Finishing Bell TAM 220 is perfectly suited for surface finishing of very small, thin, or delicate parts, but is also ideal for movable and solid components such as chains. It is equipped with a frequency inverter for stepless adjustment of the motor speed, a digital process timer, and a dosing pump. Thanks to variable speed control, the machine delivers the required precision and is particularly suitable for extended processing times without operator intervention. Technical specifications: Dusdpfxsyq Rhfj Aa Njt - Gross volume: 220 L - Motor power: 2.2 kW - Weight: 475 kg - Motor speed: 0 to 45 rpm As an experienced partner, we provide expertise in all aspects of vibratory finishing. We collaborate with you to develop efficient solutions for optimal process results. All prices are net plus the currently applicable statutory value-added tax and shipping costs. Accessories shown in the images may be optional and subject to additional charges. If you are interested, we look forward to your enquiry. We will be happy to provide you with non-binding advice. The European Commission provides a platform for online dispute resolution (ODR platform). This offer serves solely as an online presentation of our goods. Contract negotiations take place via telecommunications (email, telephone, messaging portal). In the first step, we will provide you with a non-binding offer, during which we will also inform you of our general terms and conditions including our legal notice and the right of withdrawal, before the purchase/contract conclusion takes place.

Condition: new, Year of construction: 2026, The EVP-RA 550 vibratory finishing machine from ERBA features a rising process channel floor with integrated separation facility. It is equipped with an easily interchangeable screening unit and stands out for its high operational efficiency, thanks to the integrated drop step. Emptying or separation is performed via the integrated flap (manual/pneumatic). For higher load requirements, reinforced suspension and a heavy-duty motor can be fitted upon request. The motor speed can be steplessly adjusted using a frequency inverter (optional). Owing to its side discharge, the EVP-RA 550 can be linked with other machines to form a processing line. The system can also be supplied with a fully automated PLC control unit (optional). ERBA vibratory finishing systems are renowned for their durability and long service life, which is largely due to the hot cast polyurethane lining of the process chamber. Dedpfxsyq Rguj Aa Nout Technical specifications: - Gross volume: 550 liters - Channel width: 390 mm - Imbalance motor output: 4.0 kW - Speed: 1,400 rpm - Internal drum diameter: 1,400 mm As an experienced partner, we provide expert advice on all aspects of vibratory finishing. Together, we develop efficient solutions to achieve optimal process results for your application. Prices are net, excluding the currently applicable statutory VAT and shipping costs. Equipment shown in the images may include optional accessories that are available separately and subject to additional charges. If you are interested, please do not hesitate to contact us. We are happy to offer you free and non-binding consultation. The European Commission provides a platform for out-of-court online dispute resolution (OS platform). This offer serves solely as an online presentation of our goods. The contract negotiation takes place via telecommunication (e-mail, phone, messaging portal). As a first step, we will provide you with a non-binding offer, which will include our general terms and conditions, legal notice, and information on the right of withdrawal prior to any purchase or contract conclusion.

Condition: new, Year of construction: 2026, Machine type: ESA 15 Manufacturer: ERBA Power (kW): 3.37 Sludge basket volume: 15 L Description: The ERBA ESA 15 circulation centrifuge (Patent No.: 201606464) is a professional stand-alone unit for the treatment of process water for vibratory finishing systems. It features a wastewater tank with agitator as well as a clean water tank and is capable of producing up to 600 L of fresh water per hour. Contaminant particles are separated from the process water using centrifugal force of 1500 g and removed as solid cake. The machine is easy to operate thanks to the programmable logic controller (PLC) with touchscreen interface. The ESA 15 also stands out for its compact design, making it extremely space-saving. As an experienced partner, we provide you with expertise in all areas relating to vibratory finishing. Together with you, we develop efficient solutions to achieve your optimal process results. The stated price is net, excluding the currently applicable statutory VAT and shipping costs. Some images may show the system including optional accessories, which are available separately and may incur additional charges. The listed price refers to the base machine only. If you are interested, please do not hesitate to contact us. We will be happy to advise you, without obligation. The European Commission provides a platform for online dispute resolution (ODR platform). Dujdpfsyq Rd Tsx Aa Not This offer is for online presentation purposes only. Contract negotiations take place via telecommunication (email, phone, messaging platform). In the first instance, we will provide you with a non-binding offer, along with our general terms and conditions (including legal notice) and information about your right of withdrawal, prior to the conclusion of any purchase or contract.

Condition: new, Year of construction: 2026, Machine type: Turbo 8 Manufacturer: ERBA Power kW: 0.37 Total volume: 8 l Description: Duedsyq Rdmopfx Aa Not The ERBA Turbo 8 is an entry-level centrifugal finishing machine designed for deburring, smoothing, and polishing small to medium-sized workpieces in a short process time. The machine is equipped with a digital process timer and a digital speed display. The disc speed can be adjusted via a frequency converter. The Turbo 8 is available in both dry and wet versions. As your experienced partner, we provide comprehensive expertise in the field of vibratory finishing. Together with you, we develop efficient solutions to achieve optimal process results. The stated price is net, plus applicable statutory VAT and freight costs. The system may be shown in the pictures with accessories that are optionally available and subject to additional costs. The stated price refers to the base machine only. The photos serve as examples. The actual appearance and dimensions may differ from those shown. If you are interested, please feel free to contact us. We are happy to provide you with non-binding advice. The European Commission provides a platform for online dispute resolution (ODR). This offer serves exclusively as an online presentation of our products. Contractual negotiations are conducted via telecommunication (email, telephone, messaging portal). In the first step, we will send you a non-binding offer, providing you with our general terms and conditions (including company imprint) and revocation policy before a purchase or contract is concluded.

Condition: new, Year of construction: 2026, The ERBA Turbo 120 is a centrifugal finishing machine designed for deburring, smoothing, and polishing small to medium-sized workpieces. The machine is equipped with a digital process timer, a digital speed display, and a dosing pump (wet version). The plate rotation speed can be adjusted via frequency converter. The machine also features a tilting motor for unloading. The Turbo 120 is available in both dry and wet configurations. Duodpfx Aoyq Rdaea Not Technical data: - Gross volume: 130 L - Drive power: 4.0 kW - Plate speed: 80 to 170 rpm - Optionally available with sound insulation cover, separation deck, or separation box As an experienced partner, we provide expertise in all aspects of mass finishing. Together with you, we develop efficient solutions to achieve optimal process results. All prices are net, plus the currently applicable statutory VAT and shipping costs. The images may show the machine including accessories that are optionally available and subject to additional charges. If you are interested, we look forward to your enquiry. We are happy to provide you with advice free of charge and without obligation. The European Commission provides a platform for online dispute resolution (ODR platform). This listing serves only as an online presentation of our products. Contract negotiations are conducted via telecommunications (email, telephone, messaging portal). In the first step, we will send you a non-binding offer, which will also include our general terms and conditions with imprint and information on the right of withdrawal, before any purchase or contract is concluded.

Condition: new, Year of construction: 2026, The ERBA EVP-RA 350 vibratory finishing machine features a rising work chamber floor with integrated separation system. It is equipped with an easily replaceable screening unit and delivers high operational efficiency thanks to its integrated drop step. Discharge and separation are managed via the built-in hatch (manual/pneumatic operation). On request, a reinforced suspension and a more powerful motor can be installed for higher load requirements. The motor speed can be infinitely adjusted via frequency converter (optional). Side discharge allows the EVP-RA 350 to be linked with other machines. The unit can be optionally equipped with fully automated PLC control. ERBA vibratory finishing systems are characterized by their robustness and long service life, largely attributed to the hot-cast polyurethane lining of the work chamber. Technical Data: - Gross volume: 385 L - Working channel width: 340 mm - Unbalance motor power: 2.2 kW - Speed: 1,400 rpm - Internal drum diameter: 1,200 mm Djdsyq Rc Ajpfx Aa Njut As an experienced partner, we offer expertise in vibratory finishing processes and cooperate with you to develop efficient solutions for optimal processing results. All prices are net plus the current statutory VAT and shipping costs. Images may show the machine with optional accessories, which are available separately and may incur additional charges. If you are interested, we look forward to hearing from you. We are happy to provide you with expert and non-binding consultation. The European Commission provides a platform for out-of-court online dispute resolution (OS platform). This listing is intended solely as an online presentation of our product. Contracts are negotiated via telecommunication (email, telephone, messaging portal). In the first step, we will send you a non-binding offer, which will also include our general terms and conditions, imprint, and information on your right of withdrawal, before any purchase/contract is concluded.