Used Drill Bit for sale (5,087)

Condition: excellent (used), Surface of the base plate 880 x 700 mm Distance from spindle center to stand min./max. 220 / 620 mm Drill spindle: Csdpfouigzpjx Afpegn 13 mm passage Inner cone MK 3 Stroke 150 mm Spindle speeds 25 - 2560 rpm. Spindle feeds 0.06 - 0.12 - 0.25 mm/rev Motor power (1500/3000 rpm) 1.2 / 1.5 HP

Condition: excellent (used), - Digital display Heidenhain - Accessories available Travel paths: X – path 280 mm Y – path 210 mm Cross table KS 255 D Cjdpfx Afjv E D Ttepsgn Spindle speeds 135 – 4,500 rpm

Condition: excellent (used), Heidenhain TNC 124 control system X/Y/Z travel 450/260/120 mm W travel 450 mm Clamping area (L x W) 770 x 320 mm Cgedpfxewk Edpj Afpon Permissible table load 100 kg Distance table to spindle nose (min. – max.) 0 – 110 – 560 mm Feed rate X/Y 1 – 2000 mm/min Tool quick-change system SF 32 Speed range continuously variable 100 – 9200 rpm Drive power 5 kW Space requirement (W x D x H) 1500 x 1480 x 2330 mm

Condition: used, Accessories available. Cgsdpfxoci Auvj Afpsn Fehlmann cross table KS 240 Drilling quill digitalized table size 530 - 240 mm X - path 280 mm Y - path 180 mm Speed electronic, stepless with potentiometer 132 - 4500 rpm

Condition: used, >> Condition very good! >> Speed: 45 - 4000 rpm. >> Fehlmann cross table: 380 x 750 mm >> XYZ: 420/300/500 mm Cgedpfx Aob Ecm Tefpen >> Motorized height adjustment of the drilling head

Condition: used, -Turret fence -Thread cutter table 600 x 320 mm Speed 40-3600 RPM Spindle diameter 65 mm Cgodpfx Aocyaq Esfpon Recording Aciera quick-change system Spindle stroke 120 mm Dimension WxDxH 90 x 130 x 185 cm Weight 800 kg

Condition: used, -Turret fence Cgsdpec Ndntofx Afpjn -Thread cutter table 600 x 320 mm Speed 40-3600 RPM Spindle diameter 65 mm Recording Aciera quick-change system Spindle stroke 120 mm Dimension WxDxH 90 x 130 x 185 cm Weight 800 kg

Condition: new, - Speedometer Digital - Depth indicator Digital Maximum drilling capacity 30/35 mm Codpfx Aed Slyfjfpegn Max threaded drilling capacity M12/M20 Spindle stroke 130 mm Spindle cone Morse 4 Max distance between spindle and table 790 mm Distance between spindle axis and column 308 mm Spindle stick Vertical stroke of the spindle stick 130 mm Spindle speed 1-160-1000 rpm. 2-320-2000 rpm. Dimensions of the plate 350 x 440 mm Dimensions of the upper plate 570 mm Engine power 2.7/1.7 kW Weight 305 kg Dimensions 400x900x1900 mm

Condition: used, bore capacity in steel (diameter) 15 mm throat 220 mm bore stroke 80 mm 2 speeds 320 - 1600 U/min table-size 350 x 285 mm weight 125 kg Csdpfxjyf N Ers Afpjgn dimensions 700 x 600 x 1500 mm Features: - Microdosing - Thread cutting M2-10

Condition: used, bore capacity in steel (diameter) 23 mm Cgjdpfjyfwunjx Afpen throat 220 mm bore stroke 120 mm Number of revolutions 25 - 3.200 U/min distance Spindlenose and center of table 275 mm table surface area 300 x 355 mm T-slots 3x T - slots distance 120 mm column diameter 110 mm weight of the machine ca. ca. 120 kg dimensions of the machine ca. 0,8 x 1,0 x 1,9 m Table Drilling Machine IXION - BT 23 ST - incl. base cabinet

Condition: used, Year of construction: 1993, bore capacity in steel (diameter) 40 / 23 mm Cgedpfx Afjyfwzuopsn throat 320 mm bore stroke 180 mm 4 speeds 30 - 765 U/min table-size 720 x 550 mm weight 480 kg dimensions 750 x 900 x 1900 mm Equipment: - Multi-spindle head, drill Ø 23 mm - automatic feed - coolant device - infinitely variable speed - adjustable drilling depth stop

Condition: excellent (used), Twist drills and taps grinder from 10 to 82 mm CUOGHI model APE 80 Cjdpfx Ajycc Unsfpjgn

Condition: like new (used), functionality: fully functional, Year of construction: 2021, working width: 8,000 mm, For sale seed drill Horsch Avatar 8.16 .Produced september 2021. Seed line with 160mm. Operating the seed drill can be connected to tractor ISOBUS system. Original control panel included. Liquid fertilizer system with LAUMETRIS tank included. Have worked only ca. 2700ha. Seed drill is used only in organic farming- never used mineral fertilizers. Lot of seed- and fertilizer rolls included. Cgsdsyf Nw Iopfx Afpjn

Condition: excellent (used), Year of construction: 2012, CNC Drilling Machine SCM Morbidelli Uniflex HP - Precision and Efficiency in Woodworking We offer for sale a used CNC drilling machine SCM Morbidelli Uniflex HP from 2012. This technologically advanced device is ideal for precise and efficient drilling in wood and wood-based materials. The SCM Morbidelli Uniflex HP is an excellent solution for manufacturers of furniture, stairs, interior design elements, and companies involved in large-scale woodworking. Codpfx Afov Ezfyopsgn Key Parameters and Features of the SCM Morbidelli Uniflex HP CNC Drilling Machine: ● Manufacturer: SCM Group ● Model: Morbidelli Uniflex HP ● Type: CNC Drilling Machine ● Year of Production: 2012 ● Condition: Used ● Working Area: ○ X: 3000 mm ○ Y: 1300 mm ○ Z: 80 mm ● Number of Separate Aggregates: 4 ● Drills: ○ Vertical: 96 ○ Horizontal X: 32 ○ Horizontal Y: 8 Additional Information: ● The machine is fully functional and ready for work. ● Possibility to view and test the machine. Keywords: CNC drilling machine, SCM Morbidelli Uniflex HP, CNC drilling, woodworking, wood machines, SCM Group, Morbidelli, CNC drill, furniture manufacturing. Please contact us for detailed information and to arrange a visit.

Condition: good (used), Year of construction: 1998, Universally applicable frame dowel and slot drilling machine with angle adjustment Especially designed for stair construction, window manufacturing, and versatile applications thanks to pneumatic height adjustment. Angled dowelling and spindle drillings, such as for balusters, can be easily accomplished with the swiveling drilling unit. Motor with pole switching, two speeds Motor power: 1.0 / 1.5 kW, 1400 and 2800 rpm Motor start via convenient handle switch Equipped with Röhm two-jaw chuck, 1 - 20 mm Linear laser for precise workpiece positioning Drilling unit can swivel 65 degrees left and right Pneumatic adjustment of working height allows dowelling on two levels without repositioning. Desired drilling heights can be set for each drilling level via digital counter, switching between levels is pneumatic and operated from the front Cross adjustment 340 mm, infinitely variable or in 12 mm increments via indexing rail Pneumatic clamping possible at any point, operated from the front Maximum height adjustment approx. 100 mm above table height Drilling stroke approx. 200 mm 2 pneumatic workpiece clamps, 1 clamping column repositionable to the front 2 swiveling workpiece supports Extraction funnel Central stop + 1 side stop Fixed mitre stop Length stop as round rod Assorted drill bits Operating manual CE mark Machine was partly repainted due to paint splashes. Cgodsxmatnopfx Afpjn Pneumatic hoses replaced Dimensions: approx. 1200 x 1350 x 1600 mm (LxWxH), weight 380 kg. The machine can be viewed and demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this seller."

Condition: excellent (used), Year of construction: 2009, Vertical glass drilling machine SCHRAML topDRILL 130 NC Year of production: 2009 Maximum working height: 1300 mm NC controlled Very good and clean condition Cgedpfsyfrvyox Afpsn Surplus drilling/countersink bits included As is Available immediately

Condition: like new (used), Gillardon pillar drilling machine, type GB 30 V, speed 60 - 1800 rpm, automatic feed, very good condition, tool holder MK 3. Cgsdpfx Aoxpxbcsfpjn

Condition: like new (used), Technical Specifications Drilling capacity in steel (diameter): 32 mm Throat depth: 320 mm Drilling stroke: 170 mm Spindle mounting MK: Cgjdpfevzgm Iex Afpen 3 Speed range: Table size: 570 x 480 mm Total power requirement: 1.6 kW Weight: 650 kg Dimensions: 1200 x 800 x 2200 mm

Condition: used, Year of construction: 2018, total length: 1,750 mm, total width: 1,800 mm, total height: 1,800 mm, Empty weight: 975 kg - Year: 2018 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 173180025 - Main motor power [kW]: 3 - Working range X [mm]: 3000 - Working range Y [mm]: 3000 - Working range Z [mm]: 50 Cgedsyf Hc Ijpfx Afpsn - Horizontal drilling unit: Yes - Horizontal drilling spindles [pcs]: 4 - Vertical drilling unit: Yes - Saw unit present: Yes - Voltage [V]: 400 - Current consumption [A]: 3 - Transport dimensions: 1750mm x 1800mm x 1800mm (l x w x h) - Transport weight [kg]: 975kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: good (used), Year of construction: 2000, Drilling unit SUHER Power master, year of manufacture 2000. Cgsdpfx Afjxr Dlxopon

Condition: good (used), Year of construction: 2000, Drilling unit SUHNER Mono master Type: BEM12 ST25 1040, year 2000, equipped with Siemens motor. Cjdoxr Dk Ujpfx Afpjgn

Condition: ready for operation (used), Year of construction: 1975, Column drilling machine Make CORDIA Type: S-18 Year.ca.1975 drilling in steel max.18mm spindle mounting : MK2 spindle speed : 90 -1450 rpm spindle stroke : 120 mm table:350 mm X 400 mm clamping surface;270 mm X 320 mm Cgjdpfx Afshtri Eopjn Space requirement : width 420mm depth 650mm height:2000 mm Weight:ca.350 Kg. Machine is ready for use .

Condition: used, Year of construction: 2004, operating hours: 10,948 h, 2004 | Soilmec R620 | Used Drill | 10948 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 121000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Cgodpfx Afjygxtzjpen 👷‍♂️ Inspected by an independent expert 68 inspection points 55 approved ✅ 11 imperfect ℹ️ 2 issues ⚠️ 📌 Inspector's Comment: The drill is in good working condition. You can see the full report for all of the attachments that are included with the machine. Maybe new batteries will be needed, since the machine has not worked for about 1 year. The drill was not able to be fully tested on-site. It has a variable truck frame and 4 core drills. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40269 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: ready for operation (used), functionality: fully functional, Radial drill, Csepel RFM 51, used machine Manufacturer: Csepel Model: RFM 51 X-axis length: 4000 mm Arm travel: 3100 mm Radius: 2460 mm Distance from base to spindle: 1660 mm Drilling capacity in steel: 100 mm Drilling capacity in cast iron: 120 mm Csdpfswcqlcjx Afpjgn

Condition: used, Manufacturer: Maxion Model: Ecomax 14 Condition: Used Stock number: 00199 Max. drilling capacity: 15 mm Spindle taper (MT): MT2 Min. speed: 420 rpm Max. speed: 2100 rpm Throat: 180 mm Drilling depth: 70 mm Weight: 63 kg Cgsdpfsyf Hpuex Afpjn Connection voltage: 400 V DC