Used Drill Bit for sale (5,558)

Condition: good (used), Impact drilling machine, row drilling machine -Support table: 2200 mm -Multi-spindle head: 5 drill bits -Drill spacing: 32 mm (other multi-spindle heads available) -Version: mobile -Stops: adjustable Gbjdpob A Hd Hefx Aatot -Dimensions: 2300/600/H1350 mm -Weight: 240 kg

Condition: used, Anvil-type drill bits in mint condition, unused and second-hand, as shown in the examples. Technical data: - Length: Various - Diameter: Various - Shaft: mainly 10 mm - Weight: 4.7 kg Gsdpfozrybiox Aatobt

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine Specification • Work table 1800 x 600 mm with 4 T-slots • Traversing arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots, 18 mm, rear side of machine base • 2 T-slots, 18 mm, left side of machine base • Thread cutting unit • Central lubrication • Coolant system • Machine light • CE marking • Safety device • USB interface Dimensions and Travel Ranges Tool holder: SK 40 Column diameter: 195 mm Table dimensions: 1800 x 600 mm Number of T-slots: 4 Distance between T-slots: 125 mm Quill travel (Z-axis): 200 mm Column travel (W-axis): 410 mm Distance spindle nose – table (min): 70 mm Distance spindle nose – table (max): 680 mm Distance spindle nose – floor (min): 970 mm Distance spindle nose – floor (max): 1580 mm Drilling radius: 540 – 1590 mm Working table height: 900 mm Machining Capacities Drilling capacity (solid): St 60: ⌀ 40 mm GG 22: ⌀ 50 mm Tapping: St 60: M36 GG 22: M42 Main Spindle Drive AC motor, frequency controlled: 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Torque: max. 250 Nm Constant torque from 15 – 2000 rpm Feed Drives Gbedszrr Uuopfx Aatjt X-axis - AC servo motor: 0.25 kW Y-axis - AC servo motor: 0.25 kW Z-axis - AC servo motor: 4.50 kW W-axis - AC servo motor: 2.50 kW Rapid traverse (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse (W): 3 m/min Infinitely variable feeds: 5 – 2000 mm/min Accuracy Positioning accuracy X, Y axis (over 1200 mm): ± 0.075 mm Electrical Data Operating voltage/frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit for clamping: 0.75 kW Total connected load: 13.0 kVA Weight (Danumeric 440, without packaging, with 1800 x 600 mm table): 2800 kg CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat screen, backlit, easily readable from all sides, 215 x 160 mm Position indication: Cartesian or polar, absolute or incremental Measurement units: mm or inch or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions based on machining operation, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram function: yes Machining Cycles Standard software options: Conversational programming, 38 reference point shifts, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable entry functions Zero point determination: cycles for determining reference points by manual probing of the workpiece for: - Arbitrary clamped rectangular parts - Arbitrary clamped round parts - Centering of cast and flame-cut parts - Angle position detection for round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns

Condition: used, Year of construction: 2012, CNC Machining Center Manufacturer: Weeke Type: PROFI BHP 210/56/22/R Year of Manufacture: 2012 Technical Data - Work table length: 5600 mm - Work table width: 2250 mm - Max. workpiece thickness: 135 mm Gbedpfx Aaezy N Eystot Vector speed - X/Y: 105 m/min - Z: 20 m/min Special vacuum field arrangement - 5600x2250 - 3000x1525 - 2500x1250 - 1525x1525 2x Central vacuum frame for max. 3 pumps 6 Vacuum pumps 300/360 m3/h, 50 /60 Hz Automatic tool changer spindle - Tool holder: HSK63 - Tool retraction: automatic - Direction of rotation: right/left - Speed: 1250 - 24000 1/min, continuously programmable - Drive: frequency-controlled three-phase motor - Max. power at the tool: 7.5 - 12 kW (S1/S6 50%) - Spindle lubrication: grease, permanently lubricated - Cooling: liquid circulation cooling - Bearing: hybrid bearing (ceramic) Aggregate interface for main spindle, C-axis NC-controlled pressure ring Saw/drilling/milling aggregate - Spindle protrusion: 2-sided - Saw holder: mounting flange D=40 mm, pitch circle 52 mm - Saw blade diameter: max. 240 mm - Cutting depth: max. 85 mm - Drilling and milling holder: up to 16 mm shank diameter - Tool overhang: max. 85 mm - Speed: max. 14400 1/min Tool length control Power-pack incl. CE safety system - High-speed element for the X-axis traversing portal drive - Traversal speed of the two X drives at 100 m/min Note: Oscillating plate arrangement is omitted. Automatic tool changer magazine with 14 positions - moves along with the support in the X direction - Tool holder: HSK63 - Tool weight: max. 6 kg total weight incl. HSK holder - Tool diameter: max. 130 mm when fully occupied Max. 260 mm with smaller tool diameters or available space on the secondary positions - Tool change time: approx. 12-18 sec. Vertical drilling aggregate with 21 drilling spindles - Stroke in the Z direction: 60 mm - Drilling depth: max. 38 mm (with special drill bit up to 55 mm) - Direction of rotation: right/left - Speed: 1500 - 7500 1/min, frequency-controlled - Drive: 2.3 kW - Drill holder: d= 10 mm - Total drill length: 70 mm - Drill diameter: max. 35 mm - Spindle spacing: 32 mm Lift table 4000x2100 mm - Load capacity: 3500 kg - Height: 440 mm - Useful stroke: 600 mm - Stacking height: 480 mm - Motor: 2.2 kW, 3 x 400 Volt, 50 Hz - Pump: 8 l/min - Valve voltage: 24 Volt - Lifting speed: approx. 31 mm/sec. - Lowering speed: approx. 31 mm/sec. Belt conveyor 6000x 2250 mm Package processing Special functionality: 3 plates roughing 5600x2250x15 (3x18 mm) Infeed and outfeed, basic support plate on the machine table is taken into account Movable operating terminal Control system power control PC85 Software package with graphical operating programs Woodnest Complete Consisting of: Movable label terminal Software for external PC PICA - label printer Air conditioning system for cooling the control cabinet Note: The technical data and descriptions are copies of the original order confirmation. The information is for informational purposes only and is not binding.

Condition: new, MAIN FEATURES OF THE MACHINE: -Single head drilling machine for drilling in the range of 0 - 90 °. -Pneumatically adjustable head angle -Cast-iron spindles -Spindles adapted for quick-connections -Pneumatic material clamps -Cast iron working table -Fast and accurate adjustment -Precision drilling STANDARD EQUIPMENT OF THE MACHINE: -2 1.5 m long aluminum rulers (right and left) with two stoppers -5 quick-action chucks Technical data: Number of spindles: 21 Distance between first and last drill bit: 640 mm Number of pneumatic presses: 2 Distance between centers of individual spindles: 32 mm Max drilling depth: 65 mm Air consumption: 10 l/cycle Max workpiece size: 915 x 3000 mm Max workpiece thickness: 70 mm Working pressure: 6 - 7 bar Rotation: 2800 rpm. Motor power: 1.5 kW Noise level: 76.1 dB Gbedsp Ecdgspfx Aatet Overall dimensions: Length: 1030 mm Width: 1030 mm Height: 1285 mm

Condition: ready for operation (used), Year of construction: 2017, The machine (specifically, the upper drilling head) will be overhauled, and all functions will be verified by Novellomac in September, after it arrives at the warehouse. A demonstration and on-site inspection will also be possible, including via video. Workpiece length: 3000 mm Maximum workpiece width: max. 1300 mm (with some limitations) 2 panel clamping devices Lower working units: Milling unit Saw unit for grooves, in the X and Y directions, rotatable by 90° Vertical drilling bits: 36 Horizontal drilling bits X: 6 Horizontal drilling bits Y: 2 Upper working units: Milling unit Saw unit for grooves, in the X and Y directions, rotatable by 90° Vertical drilling bits: 36 Horizontal drilling bits X: 6 Horizontal drilling bits Y: 2 Control: powerControl PC86 powerTouch Software: woodWOP Barcode reader system package Loading table with air cushion Transverse belt conveyor for unloading Godpfozq Ab Njx Aatobt Safety guards Multiple processing of workpieces up to 3000 mm in length Part of the upper drilling head requires overhaul.

Condition: new, MAIN FEATURES OF THE MACHINE: -Single-head drilling machine for drilling in the range of 0 - 90 ° -The inclination angle of the head is pneumatically adjustable -Possibility to set the side stops with an accuracy of 0.1 mm -Security handles allow the panels to be quickly positioned without adjustment -Patented pneumatic material clamps -A cast iron head that guarantees damping of all vibrations - MDF work table -Quick and accurate adjustment -Precise drilling -Quick change of drills with quick couplers -Spiral System- a device for quick adjustment of the drilling depth Technical data: Gedpfx Aeh Dzr Aeatjbt Number of spindles: 29 Distance between first and last drill bit: 896 mm Distance between centers of individual spindles: 32 mm Number of pneumatic clamps: 2 Max workpiece size: 1142 x 3000 mm Max element thickness: 70 mm Working pressure: 6 - 7 bar Noise level: 76.1 dB Air consumption: 10 l / cycle Engine power: 1.5 kW Revolutions: 2800 rpm. Overall dimensions: Length: 1507 mm Width: 960 mm Height: 1265 mm

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Maximum workpiece dimensions: 1,550 x 1,200 x 595 mm Maximum workpiece weight: 4,000 kg X and Y axis travels: 1,200 x 800 mm U and V axis travels: 260 x 260 mm Z axis travel: 600 mm Permissible wire diameter: 0.2 – 0.30 mm Simultaneously controlled axes: 4 (X, Y, U, V) Motors: AC on all 5 axes Maximum taper: 30° over 100 mm Machine weight: 9,600 kg FILTRATION UNIT Tank capacity: 3,000 liters Conductivity control system: Automatic Resin capacity: 14 liters Temperature control: Automatic Dielectric cooling system: Chiller GENERATOR Power circuits: AC MOSFET Gedsxwmacepfx Aatobt Minimum surface roughness: Ra 0.35 µm Cutting speed: 360 mm²/min (brass wire Ø 0.30 mm) Automatic wire threading: Standard Power supply: 400V, three-phase CNC CONTROL Hardware: 64-bit industrial PC Memory: 1 GB Screen: 15” TFT touchscreen Data input: Keyboard, RS232, floppy disk, LAN, USB Positioning system: Closed-loop servo-controlled Number of controlled axes: 5 (X, Y, U, V, Z) Minimum programmable increment: 0.0001 mm MACHINE EQUIPPED WITH: Optical scales on X and Y axes 600 mm Z axis Wire spool holder for coils up to 50 kg No. 1 set of 0.25 mm guides No. 1 set of 0.30 mm guides Taper cutting system Automatic wire threading and re-threading after breakage Clamping system: frame with universal drilling pattern 64-bit CNC control with 16 GB memory AC power generator with anti-electrolysis device Automatic technology generation Serial interface, floppy drive, LAN, USB Dielectric unit with automatic demineralization system Chiller Year of manufacture: 2018

Condition: good (used), Reamer, twist drill, drill bit -Twist drill: Ø 58.5 mm / Ø 60 mm -Recording: MK5 Godpfx Aajw Uz Rfjtsbt -on request: different sizes/quantities available from further stock -Transport dimensions: 610/120/H60 mm -Weight: 13.2 kg

Condition: good (used), Drill bits, twist drills, drill bits -Manufacturer: Maysso / Ilix, twist drill 4 pieces Ø 24 - 26.5 mm -Type: double cutter, MK3 mounts -Size: 1x Ø 24/25.5/26/26.5 mm each -Price/tax: complete -on request: different sizes/quantities available from additional stock -Transport dimensions: 290/100/H30 mm Godperqinqofx Aatobt -Weight: 2.5 kg

Condition: good (used), Multi-spindle head, drill beam, multi-spindle drill head, articulated multi-spindle head, row drilling machine, dowel drill head, dowel drilling machine, drilling gearbox -Number: max. 9 drill bits -Recording: M8 -right/left: rotating alternately -Drill bit spacing: 32 mm Godpfx Ajb A R Rhoatjbt -Dimensions: 140/125/H120 mm -Weight: 4 kg

Condition: used, Year of construction: 1997, Format: 0x0 Equipment: 4 head paper drills Foot control Technical data: Number of drill heads: 4x Drill bit diameter: 3 - 14 mm Drilling distance: 1 - 420 mm Stack height: 50 mm Gbjdpfxoyxqyls Aatet Speed: 680 - 2,900 rpm Power specifications: Frequenz: 50 Hz Machine Voltage: 400V

Condition: refurbished (used), Year of construction: 2012, machine/vehicle number: AA1/016854, functionality: fully functional, 3-AXIS DRILLING & MILLING CENTER Make: SCM Model: TECH Z2 Comp R0410.01 Serial No.: AA1/016854 Year: 2012 (Photos taken before overhaul, functional testing, and cleaning) MAKING CAPACITIES: - Max. workpiece height (thickness): 160 mm - Max. workpiece length: 2700 mm Dual station: 1210 mm - Max. workpiece width: 1300 mm Movements: - X-axis travel: 3060, Y-axis: 1735, Z-axis: 250 mm - Max. travel speed (vector: 60 m/min) MACHINE COMPOSITION: - 6 Pneumatically clamped beams for suction cups, e.g., 120x120 or 55x120 mm - Unit Automatic lubrication - Mounted unit on the neck of the sign composed as follows: (X movements by rack and pinion, Y movements by screws and bushings; high-quality precision linear guides with automatic lubrication) • 11 kW (15 HP) milling/routing unit: - Rotation 1500 - 24000 rpm, variable speed, right/left direction - Tool holder connection type HSK63F, ER32 collet - Onboard magazine for 8 tools - Perimeter extraction hood • 18-chuck drilling unit: - 12 independent vertical chucks (8 in the X direction, 5 in the Y direction) - 6 horizontal chucks (4 in the X direction, 2 in the Y direction) Gbodpfx Aaov Tzrvetjt - Center distance between chucks 32 mm for M10 / Ø11 mm drill bits - Rotation speed 4000 rpm - Pneumatic vertical stroke 60mm - Perimeter extraction hood • Integrated unit for groove sawing and milling - Ø120mm blade, 6mm thick - 6000 rpm speed - 60mm pneumatic vertical stroke • Mobile console on a jib with a control PC: – Windows XP operating system – 17" LCD screen – Ethernet connection – Xilog and Maestro machine interface software OTHER FEATURES: - 400V overall power supply. Three-phase + N+T 50Hz IN37A - 12 kW electro-spindle motor - 2.2 kW drilling/grooving motor - 1 x 2.4 kW vacuum pump: 90-108 m3/h - Pneumatic supply >=7 Bar - Suction: Suction inlets: 2 x Ø 150 mm (1 x Ø 200 mm inlet using the installed bypass) Recommended speed: 30 m/s - 3400 m3/h - CE-compliant machine with safety zone and light barrier Operating dimensions with safety zone: see documentation excerpts Shipping dimensions: to be specified when preparing the equipment Estimated total weight: 2200 kg Machine supplied with instruction manual and software, spare parts list, electrical and pneumatic diagrams. Please contact us for the supply of consumables, accessories, and/or vacuum systems. Machine serviced and brought into compliance, with quality control and dynamic functional testing. 3-month warranty and compliance certificate. Available from stock, subject to prior sale. Prices excluding VAT. Delivery and additional services upon request.

Condition: used, Dowel drilling machine, dowel drilling machine, drilling and dowel station, row of holes dowel drilling machine, knothole drilling machine, row drilling machine, drilling beam, multi-spindle drilling head, articulated multi-spindle head, row drilling machine, dowel drilling head, dowel drilling machine, drilling gear -Drive: 1.5 / 2.0 kW -Drill speed: 2200/4400 rpm -pneumatic workpiece clamping -15 drill bits from below, grid 32 mm -Bore head: swiveling -Foot switch -Bore depth: max. 185 mm Gsdpecuh D Rsfx Aatobt -Height adjustment: max. Mm -Max. Clamping height: 110 mm -Dimensions: 950/1100 / H1350 mm -Weight: 616 kg

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, input voltage: 400 V, spindle mount: MK 4, drilling depth: 150 mm, total width: 500 mm, total length: 700 mm, overall weight: 290 kg, Equipment: documentation/manual, 3-phase 400V, 2-speed motor is running smoothly! Geared head with 8 spindle speeds. Spindle RPM adjustable from 75 to 3010. Motor runs in both left and right directions. Spindle power downfeed. 8 feed rates adjustable from 0.004 to 0.30 mm/revolution. Adjustable drilling depth. Maximum drilling depth: 150mm MT4 spindle mount. Tool ejector. E-Off switch. Head and table are height-adjustable. Table size: 500x400mm Good overall condition. Made in Sweden. Year of manufacture: 2008 Weight: 290KG Overall dimensions: 70x50x180CM Gbsdpfxszycqcs Aatet Contact us for shipping options! €2,850.00

Condition: good (used), functionality: fully functional, heads set: right/left/top/top spindles span 32mm motors 1,1kW heads with 5 spindles max heads span 2,5m pneumatic clamps Gbedpfx Aozz N R Sjatjt regulation of drilling speed

Condition: good (used), diamond core drilling machine Godjb A H U Ajpfx Aatjbt -Drill stand -vacuum pump -Water pump reservoir -Core drill bits: Ø 15/20/3x 25/3x 28/32/40 mm

Condition: excellent (used), For sale: professional cutter and drill bit sharpener, model PP U3. Condition: very good, complete unit ready for operation. Included in the set: • Set of grinding wheels • Adjustable angular tool holder • Workshop lamp with flexible arm • Keys and clamping elements Gedexdh Hqspfx Aatebt Specifications: • For sharpening cylindrical and spiral end mills • For sharpening step and cylindrical drills • Wheel linear speed up to 35 meters per second • Maximum noise level: 66 dB • Machine weight: 41 kg Solid, stable construction—ideal for precise tool machining. A reliable solution for tool rooms, CNC workshops, and machine shops.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 408 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 50 mm, number of axes: 3, total height: 1,950 mm, total width: 1,500 mm, overall weight: 850 kg, product length (max.): 2,100 mm, This 3-axis FORMAT4 c-express 920 classic was manufactured in 2018. It features a maximum workpiece dimension of 3000 mm in the X direction and 920 mm in the Y direction, with a robust clamping collet system for CNC through-feed technology. The machine is equipped with 6 vertical and 9 horizontal drilling spindles, allowing for versatile drilling, sawing, and milling operations. If you are looking to get high-quality wood machining capabilities, consider the FORMAT4 c-express 920 classic machine we have for sale. Contact us for further details. • Voltage: 400 V • Phase: 3 Ph • Frequency: 50 Hz • Current: 22 A • Power: 7.0 kW • Duty Cycle: S6 40% • CNC Drilling Center c-express 920 classic • Clamping Collet System for CNC Through-Feed Technology • Drilling, Sawing and Milling Operations from Below • Laser "0" Double Reference • Drilling Head: DH15 • 6 Vertical Drilling Spindles • 9 Horizontal Drilling Spindles • 1 Grooving Saw in X Direction • Graphical User Interface • Machine Software License: 1 • CE Conformity • Maximum Workpiece Dimensions (X × Y × Z): 3000 × 920 × 50 mm • Minimum Workpiece Dimensions (X × Y × Z): 280 × 180 × 10 mm • 19" LCD Color Display • Mouse and Keyboard • Packed on Pallet: 2100 × 1500 mm Tools: • HW circular saw blade 100 × 5 / 3.6 × 20 Z24 / FZ • DP end mill D12 / NL23.5 / Z2+2+Q / GL80 / S20 / RL Gbsdpfxezuhcts Aatjt • ER32 collet, Ø20 mm • Drill bit Ø5 mm LL (3×) • Drill bit Ø5 mm RL (2×) • Drill bit Ø8 mm LL (4×) • Drill bit Ø8 mm RL (3×) • Through drill bit Ø5 mm LL (1×) • Drill bit Ø15 mm RL (1×) • Drill bit Ø35 mm RL (1×) • End mill Ø8 mm (1×) • End mill Ø10 mm (1×)Upon request, we can also offer suitable extraction systems (currently eligible for funding in Germany) and compressed air solutions

Condition: good (used), Year of construction: 1999, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine Specification • Work table 1800 x 600 mm with 4 T-slots • Traversing arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots, 18 mm, rear side of machine base • 2 T-slots, 18 mm, left side of machine base • Thread cutting unit • Central lubrication • Coolant system • Machine light • CE marking • Safety device • USB interface Dimensions and Travel Ranges Tool holder: SK 40 Column diameter: 195 mm Table dimensions: 1800 x 600 mm Number of T-slots: 4 Distance between T-slots: 125 mm Quill travel (Z-axis): 200 mm Column travel (W-axis): 410 mm Distance spindle nose – table (min): 70 mm Distance spindle nose – table (max): 680 mm Distance spindle nose – floor (min): 970 mm Distance spindle nose – floor (max): 1580 mm Drilling radius: 540 – 1590 mm Working table height: 900 mm Machining Capacities Drilling capacity (solid): St 60: ⌀ 40 mm GG 22: ⌀ 50 mm Tapping: St 60: M36 Gbedjyxw Ddspfx Aatet GG 22: M42 Main Spindle Drive AC motor, frequency controlled: 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Torque: max. 250 Nm Constant torque from 15 – 2000 rpm Feed Drives X-axis - AC servo motor: 0.25 kW Y-axis - AC servo motor: 0.25 kW Z-axis - AC servo motor: 4.50 kW W-axis - AC servo motor: 2.50 kW Rapid traverse (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse (W): 3 m/min Infinitely variable feeds: 5 – 2000 mm/min Accuracy Positioning accuracy X, Y axis (over 1200 mm): ± 0.075 mm Electrical Data Operating voltage/frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit for clamping: 0.75 kW Total connected load: 13.0 kVA Weight (Danumeric 440, without packaging, with 1800 x 600 mm table): 2800 kg CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat screen, backlit, easily readable from all sides, 215 x 160 mm Position indication: Cartesian or polar, absolute or incremental Measurement units: mm or inch or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions based on machining operation, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram function: yes Machining Cycles Standard software options: Conversational programming, 38 reference point shifts, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable entry functions Zero point determination: cycles for determining reference points by manual probing of the workpiece for: - Arbitrary clamped rectangular parts - Arbitrary clamped round parts - Centering of cast and flame-cut parts - Angle position detection for round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns

Condition: used, Year of construction: 1987, functionality: unexamined, number of spindles: 19, Schleicher Unidrill 19 Gjdjzxk Uyopfx Aatsbt Multi-spindle drilling machine 19 spindles with 5 mm / 10 mm drills The machine is still in use and fully functional. Collection price – delivery possible upon request. The sale is made with the exclusion of any warranty for defects in materials and workmanship. Liability for intent, gross negligence, and damages resulting from injury to life, body, or health remains unaffected. Claims due to fraudulently concealed defects also remain unaffected. An inspection of the machine is possible by arrangement.

Condition: refurbished (used), Year of construction: 1997, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Danumeric 440 overhauled and digitized 2024 Machine version - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides legible from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining cycles Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for probing the workpiece for: - any clamped rectangular parts Gjdeu Dg D Ajpfx Aatjbt - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphic Graphic display of drilling patterns Data interfaces USB

Condition: good (used), functionality: fully functional, 1 x Drilling and threading machine WMW Heckert Mikromat Well-maintained machine with complete accessories + coolant pump Technical data: Spindle speeds: 90 - 710 rpm Gbedpfxezzz E Ij Aatet (7 steps) Thread sizes: M6 - M30 Pitches: 1.0 - 3.5 mm The machine can be inspected while powered on.

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK MZS21X1 Multi-Spindle Boring Machine – Professional Precision for Furniture Manufacturing The CORMAK MZS21X1 multi-spindle boring machine is a professional solution for woodworking shops and furniture manufacturers that demand maximum precision, productivity, and reliability in high-volume drilling operations. Designed for accurate drilling in solid wood, MDF, plywood, and other wood-based materials, the machine provides complete process control and exceptional repeatability when producing holes for furniture fittings and joinery. Main advantages of the machine Pneumatic drilling head with 0°–90° tilt adjustment – features intermediate locking positions and a 45° reference point for quick setup. 21 working spindles – allow multiple holes to be drilled simultaneously, making the machine ideal for cabinet and furniture production. Mechanical digital position indicator – enables precise drilling height adjustment. 1.5 kW motor – delivers stable power and high operating efficiency. Pneumatic workpiece clamping system – ensures secure material positioning and consistent drilling accuracy. Automatic return of the drilling head – the unit automatically retracts after reaching the preset drilling depth. Adjustable feed speed – allows drilling parameters to be optimized for different materials. Support rollers and aluminum fence – extendable for workpieces up to 3 m in length. Quiet and efficient operation – achieved through precision-engineered components and a rigid machine design. Construction and technology The CORMAK MZS21X1 is built on a rigid steel frame that minimizes vibration and ensures outstanding drilling accuracy. The drilling head can be quickly adjusted to the required angle, while tool changes are simple and efficient. All spindle drive components are robustly mounted to ensure long service life, even under intensive industrial use. The pneumatic system is compatible with standard workshop air supplies operating at 6–8 bar. Precision and work efficiency The machine enables accurate drilling for dowels, hinges, and other furniture fittings in a single operation. With 21 spindles and adjustable drilling position and angle, operators gain exceptional flexibility for complex production tasks. The mechanical position indicator and digital adjustment display allow fast machine setup and significantly reduce changeover times between production batches, improving overall manufacturing efficiency. Applications The CORMAK MZS21X1 multi-spindle boring machine is suitable for: furniture manufacturing plants, woodworking workshops, interior fitting and cabinet production, manufacturers of wooden components, small and medium-sized production facilities requiring fast and repeatable drilling operations. Standard equipment 21-spindle drilling head Pneumatic workpiece clamps Aluminum fence with support rollers Digital height indicator Foot pedal control Complete set of drill holders and tool mounts Optional equipment Dust extraction systems Technical specifications Parameter Value Number of spindles 21 Spindle spacing 32 mm Maximum drill bit diameter 10 mm Maximum drilling depth 60 mm Maximum drilling diameter 35 mm Power supply 400 V Maximum working area 3000 × 2500 mm Spindle speed 2,840 rpm Required air pressure 0.6–0.8 MPa Motor power 1.5 kW Dimensions (without table extensions) 1400 × 1300 × 1400 mm Weight 350 kg Gjdpfovuf Rlox Aatjbt

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, Blockhouse milling machine BL100A, completely overhauled with factory warranty For log thickness up to 140mm, construction height up to 200mm, machining length up to 9.0m • Infeed table (timing belt cross conveyor) and entry table for timber length 9m • Blockhouse milling machine BL100A – 4-side milling machine with hydro-pneumatic feed, 2x4kW / 2x3kW for cross-section approx. 140x220mm • Carbide insert tools for wall thickness approx. 40 – 100mm included • End groove milling unit 3.0kW with cutter B=21-40mm • Drilling device with drill guide and drill bit D=20mm • Integrated under-table crosscut saw 4.0kW, saw blade D=500mm • Workpiece clamping pneumatic, with horizontal clamping jaws • Outfeed table 9m with pusher device and material storage table 6x1.5m • Servo slider positioning system with IPC control and IITO control software • Label printer for component marking, laser printer for production list printouts • Excellent condition, factory-refurbished and fully serviced, with parts warranty, ready for operation Godpfx Asxxhwleatobt • Price & delivery time on request. Subject to prior sale and all rights reserved