Used Drill Line for sale (20,086)

Condition: used, machine/vehicle number: 007665, Position 1: Automatic Drilling Machine WEEKE-BST 503 + BST 507 Gsdpfxswuz Dge Ah Hsbg Position 2: Automatic Drilling Machine WEEKE-BST 503 + BST 507

Condition: good (used), 3 drilling heads; adjustable drilling head width; power: 3 x 2.2 kW; Gsdpfoxg Ur Esx Ah Hobg

Condition: used, Two-spindle drilling machine, row drilling machine, drilling machine, floor drilling machine, column drilling machine, column drilling machine -Spindle mount: B10 -Table size: 770 x 300 mm -Max. Intermediate dimension: mm -Projection: 200 mm Gbedpfx Ajb D I Dtsh Hsg -Speeds: 250-4000/365-4150 rpm -Spindle stroke: 100 mm -Dimensions: 960/970/H1600 mm -Weight: 510 kg

Condition: ready for operation (used), Technical characteristics Single column unloader with suction cups. It is suitable for unloading in machining lines requiring machines with reduced dimensions. BODY OF THE MACHINE The machine is composed of a vertical column, a horizontal bracket fixed to the carriage, a carriage fixed to the bracket and a suction cup holder frame unit. The carriage slides on linear guides equipped with ball bearings and is driven by a gear motor controlled by a frequency variator. SUCTION CUPS PANEL COLLECTION GROUP It consists of a suction cups row containing 10 suction cups with bellows to facilitate the separation of the panel. Suction cup diameter of 95 mm. The suction cups are operated by a vacuum pump with a flow rate of 22 m3/h. ELECTRICAL CABINET The machine is equipped with a separate electrical cabinet, managed by a PLC operating logic. PROTECTIONS FOR THE PREVENTION OF WORK ACCIDENTS The machine is protected on all the action perimeter of the suction cups group by protective panels. The battery insertion area is protected by a grid with button opening. DIMENSIONS OF THE WORKABLE PANELS : Gbjdpfx Ahok Rtice Hsg Length: 320 to 2700 mm Width : 250 to 700 mm Thickness : 12 to 50 mm Maximum weight : 50 kg Pneumatic brake idler roller LOAD TRANSFER IN SINGLE LONGITUDINAL ROW Transfer of introduction with inclined rollers to the left, covered in PVC. The rollers are driven by small belts activated by a gear motor under the control of a speed variator. The transfer is also equipped with a left hand guide adjustable by handwheel. Structure The structure is made of welded steel, reinforced to ensure maximum stability and precision during the operating phases. Work surface The worktop is made up of a transfer in four independent sections. The first section includes : An input transfer with flat belts driven by an asynchronous motor controlled by a frequency converter The second and third sections (drilling planes) each include: A belt transfer with: flat belts driven by asynchronous motor controlled by frequency converter A lateral reference guide, installed on the left side of the machine, with lateral stop function Pneumatic end stops for the positioning of right and left panels A lateral presser guide to guide and clamp panels of different widths against the lateral reference stop. The fourth section includes: a belt transfer for the evacuation of the panels with : flat belts driven by asynchronous motor controlled by frequency checker. Machining center The first center consists of a mobile carriage along the X axis on which two independent drilling heads are installed along the Y and Z axes. Each drilling head is composed as follows: In the X direction, 10 independent vertical chucks In the direction of the Y axis, 9 independent vertical mandrels The second center consists of a mobile carriage along the X axis on which two independent drilling heads are installed along the Y and Z axes. Each drilling head is composed as follows: In the X direction, 10 independent vertical chucks In the Y direction, 9 independent vertical spindles. Each operating head is suitable for the installation of an additional operating unit to be chosen as an option Axis movements Precision linear guides with circulating ball bearings and brushless motors for X,Y,Z axes. Rectified helical rack coupled to two pinions to allow the recovery of the play along the X axis. Hardened and ground ball screw (Y,Z axis). Pneumatic balancing device (Z axis) of the drilling unit. Numerical control XNC model bas

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED Gbsdpfxshzbips Ah Heg It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: used, Two-spindle drilling machine, row drilling machine, drilling machine, floor drilling machine, column drilling machine, column drilling machine Gbsdpfx Ahed Tm Hns Hsg -spindle taper: MK2 -Motor: 1.2/0.85 kW -Table size: 1175 x 355 mm -Projection: 255 mm -Speeds: 125 - 1400 rpm -Spindle stroke: 125 mm -Dimensions: 1345/960/H1900 mm -Weight: 1212 kg

Condition: excellent (used), Year of construction: 2016, Schraml Topdrill M-RX 130 Vertical cnc glas milling and drilling centre Processing: Max. Glas-Length: 3.200 mm Max. Glas-height: 1.300 mm Min. Glas-length: 600 mm Min. Glas-height: 130 mm Thickness: 4-20 mm Options: Gjdpowzkm Rofx Ah Hjbg - 2x Elektrospindle 5,5 kW 0-12.000 U/Min - Tool Magazin with 2x 8 slots - CAD/CAM - central lubrification

Condition: excellent (used), Year of construction: 2016, Schraml Topdrill M-RX 130 Vertical cnc glas milling and drilling centre Processing: Max. Glas-Length: 3.200 mm Max. Glas-height: 1.300 mm Min. Glas-length: 600 mm Min. Glas-height: 130 mm Thickness: 4-20 mm Gbodpfxew Skzhe Ah Hjg Options: - 2x Elektrospindle 5,5 kW 0-12.000 U/Min - Tool Magazin with 2x 8 slots - CAD/CAM - central lubrification

Condition: good (used), Year of construction: 2005, functionality: fully functional, Homag parquet flooring line Lenghwise FPR 225 minimum wide 135mm Maximum wide 400mm 5+5 motors suitable for click HOMAG FPR 226 CROSSWISE Gjdpfx Aex Sxzweh Hsbg minimum lengh 400mm Maximum length 1500mm( could by modified to 3000mm) 5+5 motors suitable for click

Condition: new, Year of construction: 2025, A stone crushing plant for sand and aggregate making is a facility where stones and rocks are crushed into smaller pieces or gravel. It typically includes several stages of crushing and screening to produce various sizes and grades of sand and aggregate materials, which are essential in construction, landscaping, and other applications. Here's an introduction to the components and processes involved in a typical stone crushing plant: ### Components of a Stone Crushing Plant 1. Primary Crusher: - Purpose: The primary crusher, often a jaw crusher or gyratory crusher, initially breaks down large rocks into smaller pieces. - Function: It handles raw materials from the quarry or mine and prepares them for further processing. 2. Secondary Crusher: - Purpose: A secondary crusher, such as a cone crusher or impact crusher, further reduces the size of the crushed stones. - Function: It refines the material after primary crushing, producing smaller and more uniform-sized aggregates. 3. Tertiary Crusher (Optional): - Purpose: In some configurations, a tertiary crusher like a vertical shaft impactor (VSI) may be used for shaping and fine crushing. - Function: It produces finely crushed materials for specific applications, such as concrete production or road base. 4. Screening Equipment: - Purpose: Screening equipment like vibrating screens or trommel screens separates the crushed materials into different sizes. - Function: It classifies the aggregates into various grades according to size, ensuring uniformity and meeting specifications. Gsdsq N U Duepfx Ah Hobg 5. Conveyor Systems: - Purpose: Conveyor belts transport materials between different stages of crushing and screening. - Function: They ensure efficient material handling and continuous operation within the plant. 6. Washing Equipment (Optional): - Purpose: Washing equipment, such as sand washers or scrubbers, may be used to remove impurities from sand and aggregate products. - Function: It improves the quality of the final products by cleaning them and removing fines or contaminants. ### Processes Involved - Primary Crushing: Large rocks are fed into the primary crusher and reduced to a manageable size. - Secondary Crushing: The crushed materials from the primary crusher are further processed by secondary crushers to achieve the desired aggregate sizes. - Screening: The crushed and sized materials are screened to separate them into different sizes and grades. - Material Handling: Conveyor systems transport materials between different stages of the crushing and screening process. Final Product Handling:Finished products, such as sand and various sizes of aggregates, are stored or loaded for transport to customers or construction sites. Applications - Construction: Used in the production of concrete, asphalt, and road base materials. - Landscaping: Provides decorative and functional aggregates for gardens, pathways, and driveways. infrastructure: Essential for building foundations, drainage systems, and structural fill. As for the capacity we have 30 t/h, 30-50 t/h, 50-100 t/h, 100-150 t/h, 150-200 t/h, 200-300 t/h, 300-500 t/h, and both stationary crushing plant and mobile crushing plant are available for option.

Condition: new, Year of construction: 2025, working width: 1,300 mm, bending angle (max.): 135 °, sheet thickness aluminum (max.): 1 mm, total width: 1,900 mm, total height: 1,900 mm, warranty duration: 12 months, insertion depth: 1,250 mm, opening width: 105 mm, Equipment: documentation/manual, DINAMIC LINE Ltd. has been manufacturing machinery since 1994. All machines are certified, CE marked, and accompanied by a Declaration of Conformity. Our products are exported across the globe: Italy, Austria, Germany, Switzerland, Spain, Belgium, Turkey, Slovenia, Croatia, Bulgaria, Romania, Moldova, Hungary, Slovakia, Lithuania, Albania, Poland, Bosnia, Montenegro, Kosovo, North Macedonia, Australia, New Zealand, North America, Africa, Russia, Thailand, Malaysia, Tasmania, etc. Gbodpfsgmhxaox Ah Hog By agreement with the customer, delivery can be organized under CPT (Carriage Paid To) terms to the customer’s premises. Assembly is not required - ready to use immediately. Quick delivery time Specifications: Working length: From 2 meters to 9 meters Working width: 1300mm Space requirements: 8800 x 1900 x 1800 Metal sheet bending thickness: 0.8mm / Al - 1.00mm Bending angle: 135° Machine weight: 3500kg Power requirements: 3kw/16A Motor power: 2.2 kW Opening width: 105mm Insertion depth: 1250mm Bending beam thickness: 15mm or 20mm Foot switches: for 2 operator Characteristics: Ultra-fast Hyper production Hydraulic tightening and bending Electric cutting device Precise servo drive adding device Semi or automatic working mode Multi security system Automatic work by 1000 programs & subprogram Automation by PLC HMI Touch screen Friendly interface - incremental programming Remote programming & control Real time simulation & diagnostic LAN & Wi Fi communication Offset angle adjustment CHRISTMAS DISCOUNT

Year of construction: 2006, condition: ready for operation (used), functionality: fully functional, Rondo Doge Bread & Pastry Line. Year of production 2006. Total length 16.7m (Machine 11.55m + tables 5.15m) Width 1.80m (working width 0.7m) Height to hopper 3m. Total height 4.05m Efficiency: 600kg per hour - from 2500 pcs to 7500 pcs of products per hour for square, triangular and flat products Ability to produce a very thin continuous line of dough - from 1 mm to 24.5 mm. - Dough portioning hopper - 3 sprinklers - 2-roll dough extruder - calibrator - satellite sheeter - flour sprinkler - cross roller - longitudinal plate assembly - dough folders Gbjdpown Hhqofx Ah Hjg - pneumatic guillotine Machine connected to the power supply and ready to work.

Condition: used, Year of construction: 2001, functionality: limited functionality, feed length X-axis: 30,000 mm, feed length Y-axis: 2,400 mm, feed length Z-axis: 500 mm, FOR SALE 3 3 Forest gantry milling machines as discussed. Below are the specifications for these machines: - Models: Type V2 2500 EAS and Type V3 2300 AS - Capacity: 30,000 mm (X) x 2,400 mm (Y) x 500 mm (Z) - Equipment: Equipped with 2 heads REFURBISHED IN 2001 CNC NUM 1060 General Specifications Gbjdpfx Asx R Ta Ejh Hjg Below are the common specifications of the machines discussed: Models concerned: Forest Type V2 2500 EAS and Type V3 2300 AS. Working dimensions (Capacity): X axis (longitudinal): 30,000 mm (30 metres). Y axis (cross): 2,400 mm (2.4 metres). Z axis (vertical): 500 mm (0.5 metres). Head configuration: The machines are equipped with two machining heads.

Condition: excellent (used), Year of construction: 2015, operating hours: 9,700 h, Tetra Pak A3/Flex Aseptic filling line 750/1000 EDGE version 400. Aseptic packaging capacity 8.000 cartons per hour. YOM 2015 and only 9700 running hours only! The line is in excellent condition Located in Belgium, the factory did not have enough milk and decided to sell the line. The line consist: - Tetra Pak A3 Flex 750/1000 quick change Edge, V400 - DIMC Light Cap 30 Applicator - Easy Ride cartons Accumulator - Tetra Pak wrap around packer 32, V400 Gedpfx Ajx N Ncmsh Hobg - Campak 35EX Shrink wrapper with shrink tunnel YOM 2020 - Twin Pack MGE Inox Handling machine YOM 2020 - Conveyors. The line is out of production, but not dismantled and ready for pick up.

Condition: like new (used), functionality: fully functional, Year of construction: 2014, operating hours: 24 h, I am selling full complete onion peeling processing line with M&P onion peelers, items are listed below: -6x M & P onion peeler machine -all conveyers, elevators for transport peeled, unpeeled and waste product -inspection table -all working platforms -all hoppers for row (unpeeled materials) Godetzmifspfx Ah Hobg Excluded air screw compressors but for serious enquire i could help out with additional equipment. Capacity 2700- 4500 kg /h of peeled onion

Condition: new, functionality: fully functional, Year of construction: 2025, 🚧 50-600 T/H Sand & Gravel Production Line – Transforming Raw Materials into High-Quality Aggregates! 🚧 🌟 General Introduction Looking for a reliable and efficient solution for your sand and gravel production needs? Our 50-600 T/H Sand & Gravel Production Line is a high-performance system designed to meet the diverse requirements of construction, infrastructure, and industrial projects. Whether you need coarse aggregates or fine sand, this production line ensures precision, efficiency, and scalability. --- 🏗️ Wide Range of Applications Our sand and gravel production line is perfect for: - Construction Projects: Producing aggregates for concrete, asphalt, and roadbeds. - Mining Operations: Processing various ores and minerals. - Infrastructure Development: Creating high-quality materials for bridges, dams, and highways. - Commercial Sand Supply: Meeting market demand for sand and gravel in bulk. --- 💎 Key Advantages ### 1. High Capacity & Versatility - Produces 50-600 tons per hour, easily scaling to match project demands. - Handles a wide range of raw materials, including limestone, granite, basalt, and river stones. ### 2. Advanced Technology - Incorporates cutting-edge crushing, screening, and washing equipment for consistent quality. - Optimized for energy efficiency, reducing operational costs. ### 3. Customizable Solutions - Configurable to meet your specific requirements, from particle size to layout design. - Offers flexibility in combining different crushers (jaw, cone, impact) and vibrating screens. Gbodpfx Ahsq Nywxs Hog ### 4. Durable & Low Maintenance - Built with robust materials to withstand heavy-duty operations. - Easy-to-maintain design minimizes downtime and extends equipment lifespan. ### 5. Environmentally Friendly - Features dust suppression systems and water recycling units to reduce environmental impact. - Promotes sustainable practices in aggregate production. --- 🚜 Your Complete Solution Our production line includes: - Primary Crushing: Breaks down large rocks into manageable sizes. - Secondary Crushing: Refines materials to desired specifications. - Screening Equipment: Ensures uniform sizing and quality control. - Washing System: Removes impurities for cleaner, higher-grade aggregates.

Condition: refurbished (used), Year of construction: 1999, travel distance X-axis: 11,450 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,250 mm, Technical description Value Unit Travel distance X-axis: 11,450 mm Y-axis: 3,500 mm Z-axis: 1,250 mm Cross-section of the Z-axis slider: 360 x 360 mm Portal aperture: 3,000 mm Height under vertical spindle: 1,400 mm Working clamping width: 2,500 mm Milling unit: Type FA 305 C Power: 30 kW Max. torque: 1,070 Nm Max. speed: 4,000 rpm Cross section of the pusher: 360 x 360 mm Vertical head with spindle Power: 30 kW Max. speed: 4,000 rpm Max. torque: 1,070 Nm Rapid traverse in X, Z: 25,000 mm/min Rapid traverse in Y: 20,000 mm/min Work feed infinitely variable in X, Y and Z: 10,000 mm/min Compressive force of each axis: 25,000 N Tool holder: SK 50 Horizontal angle head with 144 x 2.5° pitch, with SK50 spindle Available power: 30 kW Max. speed: 4,000 rpm Max. torque: 1,070 Nm Positioning increment: 2.5 degrees Longitudinal pallet system 1 pallet shuttle with 2 storage stations 1 manual pallet transfer system between machine and shuttle 2 workpiece holder pallets: 5,000 x 2,500 mm Tool changer Chain magazine: 80 positions Distance between the positions on the chain: 130 mm Diameter of consecutive tools: 125 mm Tool diameter max.: 200 mm Maximum tool length: 400 mm Tool weight max.: 25 kg Tool change time, tool to tool: 8 sec Tool change time, chip to chip: 38 sec Equipment: Cooling devices: - Cooling via orientable nozzles - IKZ / cooling through the center of the spindle, 3,000 l tank, Gbodpfxetix S Ne Ah Hog capacity: 30 l/min, pressure: 7 bar at the mold 2 chip conveyors: 1 Portal cladding Measuring probe, make: RENISHAW, type: MP14 Electronic handwheel Remote diagnosis Tool management and wear management Documentation in 2 copies: German / French CE marking Very well maintained, continuously serviced condition!

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, A complete line for the production of wood pellets with a capacity of 1.2 tons per hour from wood chipping and handling to the final product of wood pellet packed in nylon bags. The complete line was designed by Italian engineering company FIDA who also has its own transport equipment, silos and conveyers. All the drawing and schematics and documentation is available. The project was financed by EU and was valued at about 1.3 million EUR which documentation confirms. Compleete line was inspected and refurbished so it is ready for use for many years to come. Its overall operating hours on most equipment is below 500 hours which is practically new equipment. It only requires 2 employes to operate per shift. Gedpsi Akrkjfx Ah Hjbg CHECK EQUIPMENT LIST IN THE DOCUMENTS IN THE ATTACHMENT. 1. Wood chipper and transport conveyors 2. Hammer mill and dozing container and distribution conveyors 3. Drying, rotary drum, furnace, anti-fire pipes, ventilation and storage silo 4. Dust removal, pelleting, cooling and packing (It is about 6 full trucks of equipment) The complete line, almost the same as the one on sale, can be seen installed and in operation for reference before installation. More pictures are available on viber and whatsapp. We can also offer service of installing the pellet line. Depending of location and available equipment with the company performing the purchase.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Line was implemented & wasnt used for serial production yet except FOT production. Quite new. It contains below processes : Robotics ArcWelding Cell With 3 Axis Turn Table x 2 Qty 2S-1100 Robotics ArcWelding Cell X 1 Qty Knuckle Bracket and Spring Seat Fixture x 4 Qty Stab Bracket Fixture X 2 Qty Knuckle Bracket Projection Welding System X 1 Qty Automatic Base Cap and Knuckle Bracket Assembly System X 1 Qty Gsdpfx Ahsw Upppo Hjbg Drilling And Press Machine with Industrial Robot X 1 Qty Leakage Test System X 1 Qty Marking System X 1 Qty

Condition: used, Year of construction: 2017, NP 683 | USED KHS CAN FILLING LINE 25,000 CPH Capacity: 25,000 cans per hour Products: Beer and carbonated soft drinks Can format: 500 ml; 211/202 Year of manufacture: 2012, 2017 Current condition: Still installed – machine powered. Can be inspected in dry cycle. Available for dismantling: November 2025 Packaging: Cans will be packed in trays with shrink film. Line components: - Bulk can depalletizer: Linker DPG-500, year: 2012 - Can inspector: Transtech Hysek, year: 2012 - Can conveyor: Linker Conveyor RC/KHS, year: 2012 - Rinser: Linker Triplex Rinser TR/KHS, year: 2012 - Flash pasteurizer: KHS Innopro 140/14/85, year: 2012 - Filler: KHS Innofill Can DVD, year: 2017 - Seamer: Ferrum F08, year: 2012 - Lid feeder: NSM Lidserver A30, year: 2017 - Conveyor: KHS Innoline BTR, year: 2012 - Fill height inspector: KHS Innocheck CUB, year: 2012 Gsdpfxexd Ap Ho Ah Hobg - Blower: Europool - Tray packer: KHS Kisters SP0502, year: 2012 - Tray pack conveyor: KHS Innoline GTR, year: 2012 - Handle applicator: KHS CSM 050-2, year: 2012 - Packing machine: KHS Innopack 035 B2+FS A-L, year: 2012/2017 - Palletizer: KHS Innopal PBL1N1, year: 2012 - Pallet stretch wrapper: SIAT MFP, year: 2017 - Pallet conveyor: KHS Innoline PTR

Condition: like new (used), functionality: fully functional, Year of construction: 2014, operating hours: 24 h, I am selling full complete onion peeling processing line with M&P onion peelers, items are listed below: -6x M & P onion peeler machine -all conveyers, elevators for transport peeled, unpeeled and waste product -inspection table -all working platforms -all hoppers for row (unpeeled materials) Excluded air screw compressors but for serious enquire i could help out with additional equipment. Gsdpfjrrglysx Ah Hjbg Capacity 2700- 4500 kg /h of peeled onion

Condition: new, functionality: fully functional, Year of construction: 2025, Aggregate and ballast crusher equipment are used in the crushing and processing of various materials for construction and infrastructure projects. These crushers are designed to break down large rocks, gravel, or stones into smaller pieces, producing aggregates and ballast that are essential components in the construction industry. Here are some key aspects related to aggregate and ballast crusher equipment: 1. Jaw Crusher: - Jaw crushers are commonly used for primary crushing in aggregate and ballast production. They operate by compressing the material between a stationary and a movable jaw. 2. Impact Crusher: - Impact crushers are suitable for shaping and producing fine aggregates. They use impact force to crush the material, making them suitable for various types of rock and ore. 3. Cone Crusher: - Cone crushers are often used for secondary and tertiary crushing in aggregate production. They are efficient for producing well-shaped and finely graded aggregates. 4. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are designed for shaping and producing high-quality artificial sand. They use the "rock-on-rock" crushing principle, where rocks are fed into the rotor to be accelerated and crushed against the stationary anvils. 5. Gyratory Crusher: - Gyratory crushers are primarily used in mining, but they may also be used in the production of aggregates. They have a conical head and a concave surface, which crushes the material between the head and concave. Gjdpfx Aheq Nxrxe Hjbg 6. Mobile Crushers: - Mobile crushers, including mobile jaw crushers and mobile impact crushers, provide flexibility and mobility for on-site crushing of aggregates and ballast. They are often used in construction projects where materials need to be processed directly at the job site. 7. Screens and Scalpers: - Screens and scalpers are used to separate different sizes of aggregates after the initial crushing stage. Vibrating screens are commonly employed to classify and separate materials based on size. 8. Conveyors: - Conveyors are crucial for transporting materials between various stages of the crushing process and for stockpiling the final products. They enhance efficiency in material handling. 9. Dust Suppression Systems: - Crushing operations can generate dust, and dust suppression systems are used to minimize environmental and health impacts. These systems may include water sprays or chemical suppressants. 10. Quality Control: - Quality control measures, such as particle size analysis and gradation testing, are essential to ensure that the produced aggregates and ballast meet the required specifications and standards. 11. Environmental Considerations: - Crusher equipment should adhere to environmental regulations, and measures like dust control, noise reduction, and proper waste disposal should be implemented. When selecting aggregate and ballast crusher equipment, factors such as the type of material, required product size, production capacity, and mobility requirements should be taken into consideration. Additionally, adherence to safety and environmental standards is crucial in the operation of crushing equipment.

Condition: used, Year of construction: 2013, Bottling Filling Line for Oil PET Year: 1995 | 2013 Speed: 6,000 bph on 1 L Cap: 29/21 mm Preform feeder Compressor for chiller moulds MTA Nr.1 Blower Kosme KSB 3000 Nr.2 Blower Kosme KSB 3000 Air conveyors Kosme Filling/capping monoblock ICS – 6,000 L/h Labeller ICS cold glue Shrink wrapper SMIPACK Shrink pallet wrapper Zlatorog Gjdpfoq Ttuqex Ah Hjbg KAESER high-pressure compressor Code: NP 537

Condition: excellent (used), Used Bottling Line | used Beverage Line | soft Drinks NP 643 | PET LINE FOR JUICES Speed: 9,000 Bph composition: Bottle elevator Bottle unscrambler Rinser Year 2011 Number of grippers 50 Type of double treatment Type of fixed nozzle Monoblock 30-valve filling machine 10-head capper Caps elevator HEUFT bottle inspector Gbedpfsuhzlaox Ah Hog X-ray for bottle bottom inspection Tapes Bundler Year: 2011 Film-throwing type Available sizes: 250 ml, 330 ml, 500 ml and 750 ml User manuals and wiring diagrams present

Condition: like new (used), Year of construction: 2004, functionality: fully functional, COMPLETE ASEPTIC TETRA PAK TBA LINE Year: 2004 Output speed: 8,000 packs/hour Filling machine: Tetra Pak model TBA/21 TPA 500 SO Gbjdpfx Ahjv Ay Uuj Heg Packaging type: Tetra Brik Aseptic (TBA) Format: 500 ml Prisma Speed: up to 8,000 packs/hour Aseptic filling technology: Hydrogen peroxide sterilization Packaging material feed: Roll-fed carton Touchscreen operator panel Cap applicator: Tetra Pak model TETRA PAK APPLICATOR 45 Cap type: TwistCap or LightCap Cap application: Fully automated Hot melt glue system: Nordson Problue 4 Cap elevator: Tecno Vibrazioni Packing unit: Tetra Pak model TETRA CARDBOARD PACKER 70 Secondary packaging: Tray or box packing Hot melt glue system: Nordson Problue 10 Inkjet coder: Videojet Coding type: Expiry dates, lot numbers Conveyor system: Total length approx. 65 meters