Used Milling And Drilling Machine for sale (70,023)

Condition: used, Year of construction: 2007, x-travel 600 mm y-travel 450 mm z-travel 450 mm Control Heidenhain In our estimation, the machine is in good used condition and can be inspected under power by appointment. Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Nsdjy T Scqepfx Aqvoct Subject to changes, errors in technical data and specifications, and prior sale!

Condition: used, Year of construction: 2000, x-travel 800 mm y-travel 600 mm z-travel 500 mm Control Heidenhain spindle tunring speed 15.000 U/min tool taper SK 40 table surface area ø630 mm Nsdpfsy T Scksx Aqvoct In our estimation, the machine is in good used condition and can be inspected under power by appointment. Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: used, x-travel 1.000 mm y-travel 800 mm Nedpfx Aoy T Sb Teqvjct z-travel 500 mm Control Heidenhain spindle tunring speed 15.000 U/min table dimensions 1.250 x 800 mm number of tool places 30 Pos. In our estimation, the machine is in good used condition and can be inspected under power by appointment. Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: used, Year of construction: 2007, x-travel 780 mm Ncodpfx Aqsyb S Ibevot y-travel 560 mm z-travel 560 mm total power requirement --- kW weight of the machine ca. 12,0 t dimensions of the machine ca. --- m

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Nsdexwaz Hspfx Aqvjct

Condition: used, Year of construction: 2024, Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard configuration, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release sequence, including electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic drilling depth extension for end-face drilling. This saves the need to adjust the drilling depth when switching from flat-face to end-face drilling (+10 mm, e.g., with dowel length 35 mm, flat-face drilling depth 14 mm, end-face drilling depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill bit changeover. - Easy pivoting of the drilling unit from 0° to 90°, assisted by gas cylinders. - 1 clamping beam movable on Y-axis with 3 pneumatic clamping cylinders, for workpieces up to max. 80 mm height. Ideal fence system consisting of: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops. - Quick-change system, easily switchable from right to left stop for mirrored drilling of shelves in carcass construction; also suitable for line boring in system 32. - Side stops and position adjustments, as well as drilling height position, via mechanical digital counters on the support table. - Side stops can be easily folded away for fastest set-up change from carcass to frame or line drilling. - Clamping arms for the clamping beam enable line boring positions up to max. 300 mm. - Optimized three-stage tool system. Includes 1 set of dowel drill bits: - 5 carbide dowel bits, Ø 8x77 mm, right - 4 carbide dowel bits, Ø 8x77 mm, left Basic machine Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard version, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release, electrical skip operation. Ncjdjxnlflspfx Aqvjt - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic extension of drilling depth for end drilling saves the need to adjust depth when switching from flat to end drilling (+10 mm, e.g. for dowel length 35 mm, flat-side depth 14 mm and end-side depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill changeover. - Easy pivoting of the drilling unit from 0° to 90°, gas spring assisted. - 1 clamping beam, Y-axis adjustable, with 3 pneumatic clamps for workpieces up to max. 80 mm high. - Ideal stop system comprising: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, quick-change system, easily switched from right to left for mirrored shelf drilling in carcass constructions, also usable for line boring in system 32. - Side stops and adjustable positions, as well as drill height position, via mechanical digital counters on the support table. - Side stops can be folded away easily for shortest retool time from carcass to frame and line boring operations. - Clamping arms for the clamp beam suitable for line-boring positions up to max. 300 mm. - Three-stage optimized tool system. Extraction funnel, dust tested, Ø 120 mm 1 set for line boring in system.

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Equipment and technical data: - 2-jaw drill chuck for up to 20 mm shank diameter - Pneumatic position adjustment on 2 levels, 0-100 mm - Max. drilling depth 150 mm - Precision indexing rail 12 mm - Central locking and cross adjustment - 2 pneumatic safety clamping cylinders - Motor 1.5 kW - Speed 2800 rpm Dimensions (without stop): 1100 x 1100 x 1500 mm Weight: approx. 310 kg Availability: short-term Storage location: Röllbach Ncjdowkba Hepfx Aqvot

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 Condition: Well-maintained/Functionally tested Equipment and technical data: Number of drilling spindles: 21 pcs. with 32 mm spacing Drilling direction: Bottom and end face Swivel range: 0-90 degrees, manually adjustable Pneumatic material clamps: 3 pcs. Passage: Max. 100 mm in height and max. 640 mm in width Nodpfx Aey Tczkoqvsct Motor: 1.5 kW Dust extraction diameter: 120 mm Includes a variety of stops (see pictures) Availability: short-term Location: Röllbach

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Features and technical data: 2-jaw drill chuck up to 20 mm shank diameter Pneumatic positioning adjustment on 2 levels 0-100 mm Max. drilling depth: 150 mm Precision indexing rail 12 mm Center locking and cross adjustment 2 pneumatic safety clamping cylinders Motor 1.5 kW Speed: 2800 rpm Long hole drilling device, lowerable, with 2 program cams Nedpow I Uy Tjfx Aqvect Machine weight approx. 310 kg Machine dimensions (W x D x H): 1100 x 1100 x 1500 mm (without stop) Availability: short-term Location: Röllbach

Condition: excellent (used), Year of construction: 2009, x-travel 6000 mm y-travel 2100 mm z-travel 1500 mm control HEIDENHAIN iTNC 530 feed 2- 20 m/min spindle turning speed range 20 -4000 U/min table dimension - longitudinal 7000 mm table dimension - cross 2000 mm total power requirement 79 kW weight of the machine ca. 55 t dimensions of the machine ca. 15 x 7 x 4,6 m The SORALUCE FP6000 is in very good condition. accessories as option: # clamping angle: 5'000.-€ # Clamping cube: 2'000.-€ # Div. tools & workbench: 2'000.-€ Description: - CNC control: HEIDENHAIN ITNC 530 Ncodjvwgl Ajpfx Aqvot Orthogonal milling head: - Tool holder: ISO 50, DIN69871 AD - Automatic tool clamping: Clamping force 20,000 N - Indexing accuracy / repeatability: ± 3 sec. == ± 0.002 mm - Tightening bolt: DIN 69872 form A - Number of swivel positions: 1 x 1 ° milling head ( 360 positions rear plane, 270 positions front plane) 270 positions front plane) - Diameter spindle bearing: 90 - Sealing air: 0,7 bar Main drive: - Drive type: three-phase motor - Drive power: 100 % ED 32 kW spindle: - Spindle speed: 20 - 4000 rpm - Full power from: 340 rpm - Torque at 32 kW/S1: 910 Nm - Speed control: 2 ranges infinitely variable via star/delta connection Rapid traverse: max. 35000 mm/min

Condition: good (used), Year of construction: 2000, x-travel 3500 mm y-travel 1600 mm z-travel 1200 mm Ncsdoykvayopfx Aqvjt spindle turning speed range 250 - 3000 U/min tool taper ISO SK-50 tool change unit 40 rapid traverse: 15000 mm/min. feed 5000 mm/min table dimension - longitudinal 3860 mm table dimension - cross 1000 mm control HEIDENHAIN TNCi530 weight of the machine ca. 24 t dimensions of the machine ca. 8000 x 5000 x 4000 m

Condition: used, x-travel 560 mm y-travel 500 mm z-travel 410 mm Nsdpfxsy Ty Nrs Aqvoct Control Heidenhain TNC 355 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, x-travel 800 mm y-travel 600 mm z-travel 550 mm Control Deckel Dialog 11 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope Nsdpfx Aey Ty Nfsqvsct of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, x-travel 300 mm y-travel 300 mm z-travel 400 mm Control Dialog 11 turning speed range - main spindle 40 - 4000 min/-1 tool taper SK 40 swivellable +/- 90 ° quill stroke 80 mm In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Accessories: - Cabin Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as prior sale reserved! Nodpfoy Ty I Uox Aqvsct

Condition: used, Year of construction: 2008, x-travel 700 mm y-travel 420 mm z-travel 610 mm Control Heidenhain output 22 kVA weight ca. 5.200 kg Ncsdoy Ty Izopfx Aqvst In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: used, x-travel 560 mm y-travel 500 mm z-travel 410 mm Control Deckel Dialog 11 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Ncedpfxsy Ty Iuj Aqvjt Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, x-travel 560 mm y-travel 500 mm z-travel 410 mm Control Deckel Dialog 11 Ncedpfsy Ty Insx Aqvot In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2000, functionality: fully functional, feed length X-axis: 4,000 mm, feed length Y-axis: 1,050 mm, feed length Z-axis: 200 mm, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Dimensions and Travel Ranges Tool holder: SK 40 Table dimensions: 4000 x 800 mm Number of T-slots: 6 T-slot spacing: 140 mm Distance: Spindle lower edge min. 140 mm Table upper edge max. 740 mm Boring radius: min. 540 mm max. 1590 mm Travel range U-axis: 2600 mm Travel range Y-axis: 1050 mm Quill stroke (Z-axis): 200 mm Column stroke (W-axis): 400 mm Machining Data Drilling capacity in steel St 60: 40 mm Drilling capacity in cast iron GG 22: 50 mm Thread cutting: St 60: M 36 Thread cutting: GG 22: M 42 Main Spindle Drive AC motor, frequency-controlled: 5.5 kW at 100% duty cycle Speed range: 15 - 2800 min-1 Ncjdpfx Aqoy Ttrtsvot Torque: max. 250 Nm Constant from: 15 - 200 min-1 Feed Drives X-axis - AC servo motor: 0.25 kW Y-axis - AC servo motor: 0.25 kW Z-axis - AC servo motor: 4.50 kW W-axis - AC servo motor: 2.50 kW U-axis - AC servo motor: 2.50 kW Rapid traverse rates (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse rates (U/W): 7.5 / 3 m/min Feed rates, stepless: 5 - 2000 mm/min Feed force: 12000 N Accuracy Positioning accuracy X, Y-axis on 1200 mm: ± 0.075 mm Repeatability X, Y-axis: ± 0.03 mm Positioning accuracy Z-axis: ± 0.05 mm Repeatability Z-axis: ± 0.03 mm Positioning accuracy W-axis: ± 0.05 mm Repeatability W-axis: ± 0.03 mm Electrical Data Operating voltage / frequency: 400 / 50 V / Hz Control voltage: 24 V Total connected load: 13.0 kVA CNC Control Axes: 5 (X, Y, Z, W, U), expandable Display: TFT flat screen, backlit, easily readable from all sides Position data: Cartesian or polar, dimension data absolute or incremental Units: mm or inch, or in degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions based on machining process, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram technique: yes Machining cycles: Cycles for centering, drilling, thread cutting, reaming, countersinking and counterboring, freely programmable cycle for special tools, dwell time possible for each cycle Chip breaking / chip removal: possible during drilling cycle Drilling patterns: hole pattern, hole circle, matrix Basic software: Programming in dialog mode, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for: - rectangular parts mounted in any way - round parts mounted in any way - determination of castings and forgings - angle detection in round parts by probing reference edges or surfaces Data interfaces: USB interface Painting (Repainting) Standard painting, two-component textured paint Machine upper part: light gray RAL 7035 Machine lower part: signal blue RAL 5005 Documentation Operating and programming manual Electrical circuit diagram Spare parts drawings Test report for mechanics, electrical components and safety devices

Condition: used, Year of construction: 1996, workpiece length 55- 170 mm work piece width max. 28 mm workpiece height max. 27,5 mm milling motor 2 Njdpfoy Ty Hqsx Aqvect cut-off saw 1 Special machine APK automatic sawing and milling machine for cutting wooden blocks to length and then milling them. Special design for the production of cutlery tray inserts (see pictures) or similar workpieces. Work sequence: 1. feeding the material from the magazine 2. cutting (sawing) to the desired length 3. milling of the cut workpieces 4. ejection of the finished part.

Condition: excellent (used), CATALOG NUMBER: 6607 TECHNICAL DATA Circular saw: - Maximum blade diameter: 350mm - Spindle: 30mm - Lockable spindle - Blade adjustable front/back, up/down - Blade guard - Motor: 1.1kW - Extraction port diameter: 80mm Spindle moulder: Tenoning spindle: - Spindle diameter: 40mm - Spindle working height: 140mm - Lockable spindle - Maximum cutter head diameter: 350mm - 2 spindle speeds: 3000 / 4500 rpm - Motor: 5.5kW - Brake - Side sliding table – manual feed - Table dimensions (L/W): 1180x600mm Ncsdpfey R Dl Eox Aqvst - Mitre fence - 2 pneumatic clamps - Extraction port diameter: 120mm - Overall dimensions (L/W/H): 2600 (for shipment 2000) /1600/1450mm - Weight: 735kg – Very good condition – Used tenoning machine Net price: 13,900 PLN Net price: 3,300 euros depending on exchange rate 4.2 euro (Prices may vary in case of significant fluctuations)

Condition: excellent (used), bore capacity in steel (diameter) 45 mm throat 300 mm bore stroke 160 mm taper MK 4 table surface area 600 x 500 mm table adjustable 550 mm total power requirement 0,8 kW Ncjdpsy T Sdhsfx Aqvjt weight of the machine ca. 0,5 t dimensions of the machine ca. 0,8 x 0,6 x 1,8 m

Condition: used, x-travel 1.000 mm y-travel 800 mm z-travel 800 mm Control Siemens Sinumerik In our assessment, the machine is in good used condition and can be inspected under power by appointment. Nedpsy Tprcofx Aqvsct Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: good (used), Year of construction: 1998, functionality: fully functional, DONAU DANUMERIC 440, year of manufacture 1998 Technical specifications: - Table 1800 x 600 mm, 4 T-slots - Drilling radius 540 – 1590 mm - Spindle taper SK40 - Speed range 15 – 2800 rpm - Motor power 5.5 kW - Weight approx. 2,800 kg Ncsdpfxoy Txlrj Aqvjt

Condition: good (used), Year of construction: 1992, Table clamping surface 1850 x 710 mm Permissible table load 3000 kg Travels: Longitudinal, automatic (X) 1600 mm Transverse, automatic (Y) 710 mm Vertical, automatic (Z) 850 mm Spindle holder SK 50 Speed range 20 - 3000 rpm Main motor power, AC 15 kW Transport dimensions L x W x H 3650 x 2300 x 2700 mm Weight 9400 kg Accessories / Special features: - CNC contouring control make HEIDENHAIN model TNC 360 with 3 scales - Programming language "plain text dialog" and DIN-ISO - Electronic handwheel HEIDENHAIN HR 330 with magnetic holder - 3-D touch probe HEIDENHAIN TS 120 - Main spindle compact unit RAC 3 - Control prepared for 4th axis - Universal milling head system "HURON with 2 levels, oil lubricated - Hydr. tool clamping - Coolant device Ncsdpfottamkjx Aqvst - Central lubrication with interval - German electrics, INDRAMAT drives - Suspended control panel Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2017, machine/vehicle number: 17.018.011, Weight: 4,950 kg, travel ranges: X/Y/Z: 11 mm, drilling capacity: connection power: 7.5 kW, spindle speed: 3,000 rpm, current draw: 32 A, with a 12-position tool changer, 10 pneumatic clamps distributed along the entire bed length, with various fixtures and conveyor elements, operator terminal, control cabinet, safety fence with access door, machine footprint: 300x14,000 cm. Nodpfx Ajy T Nz Dsqvect